Regarding Product group Creation

Dear SAP Guru
                          I am facing issues while creating Product group by the code MC*$.The error is "The field  is defined as a required field; it does not contain an entry
Message no. MG144 ".Also while cretaing through the material tyoe prod, i am facing error of getting the Profit center
Regards
Edited by: Bhupendrasingh on Mar 7, 2012 9:19 AM
Edited by: Bhupendrasingh on Mar 7, 2012 9:27 AM

Hi Bhupendra,
Please see the below link, may be it help you out.
Getting Error Message on the MC84 transaction code MG144
PRODUCT GROUP
Thanks,
Mohit

Similar Messages

  • Product group creation error

    Hi Guys,
    While creating product group i am getting the following error can any one help me out to resolve the same
    The error
    Required parameters missing when calling up module
    Message no. M3749
    Thanks and regards
    Thamizhchelvan G

    Dear Thamizhchelvan,
    I think you must be working in ECC 5.0 or ECC 6.0 version.
    If so means first create a material say test using material type PROD - Product group in T Code MM01
    and then assign the members in MC85/MC86 for the product group.
    check this link
    product group
    This will solve your problem.
    Regards
    Mangalraj.S

  • ERROR WHILE PRODUCT GROUP CREATION

    Dear All,
    I am trying to creat the product Group but system is giving the
    following error.
    Message No.M3749
    "Required parameters missing when calling up module".
    Please give your valuable input to overcome the issue.
    Thanks & Regards,
    Vijay Mankar
    +91 9871251289

    Dear Ramanujan,
    I have create Product Group lots of time without crate a material with PROD material type in IDES,and also I have checked it on other client DEV server its creating properly,and one thing ,if I entered Product Group & did not saved and again try to create it again ,it gives error that the Product group is already exists. Why it is happened?
    But why it is not allowing me to create at my end.
    Please give your valuable inputs for the same.
    Vijay Mankar

  • Error in Product group creation

    HI,
    When I am creating product group at that time i m getting error like "Required parameters missing when calling up module"
    Can anybody tell me solution..?
    Product grp i m creating for SOP.

    Dear Chetan,
    Create a material using T code MM01,using the material type as PROD and then assign a plan for this product group in MC81.
    Check this link,
    Product group error
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Aug 20, 2009 3:18 PM

  • Automatic Product Group Creation.

    I'm wondering if I can create Product Groups automatically.  My problem is that I have 110 Product groups in Excel and they are assigned to 2500 materials. Now I want to move to have those product groups in SAP. Creating "PROD" material and then assigning them in MC86 is painfull.
    Is it possible to do it with LSMW or someting like that? If yes please provide step by step tutorial.
    Thanks

    sure it is possible with LSMW, is there anything that cannot be loaded with LSMW?
    LSMW is well documented:
    http://help.sap.com/saphelp_nw70/helpdata/en/4d/455035082e2271e10000009b38f889/frameset.htm

  • Creation of product group

    hi
    i am creating product group using transaction code mc84
    while creating product group it gives error as "The field  is defined as a required field; it does not contain an entry"
    I have entered
    Product group   PP_TEST             PP test
    Plant           1001
    Base Unit       KG
    selected materials as members
    will anyone tell me where i m going wrong?
    Prashant

    Hi,
    You might have marked some field as mandatory . And as in product group creation we have limited view so that error might be occuring .
    Check what field you have marked as mandatory in t code OMS9 and OMSR
    Regards,
    Vishal

  • Regarding Creation of Product group

    Hi SAP Guru,
    I am being Unable to create a product group at new , although I have done it and run at other client.Also Please let me know the Views to select. As per My knowledge I have selected only 05 views , basic, MRP-1,2,3,4.... Need not to select the accounting and costing views. System says error message that u dont have requireed field parameter.Although I am able to create the same through MMZ1
    Regards
    Bhupendra Singh
    Edited by: Bhupendrasingh on Jan 29, 2012 7:17 AM

    Bhupendrasingh wrote:
    >   I am getting the following error
    > " E MG 144 The field profit Ceneter is defined as the required field It doest not carry any enntry in  MARC-PRCTR
    Hi,Just check in OMSR, The 'Field sel. group' for MARC-PRCTR get the Field sel. group(default is 48), In OMS9 check for MM01, MM02, ROH ,FERT, this field is mandatory, if it is mandatory then you have to maintain the profit center, you can try with making it optional, but this field is made mandatory with some purpose so better to ask your FI for proper profit center for raw material & maintain it in either costing view or Plant data storage 2 view & then proceed further.

  • Error during Creation of Product Group

    Hi experts
    I am getting below error during creation of Product Group MC84,
    how to solve this
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

    Hi,
    Please refer the below thread,
    PRODUCT GROUP
    Regards,
    Senthilkumar

  • Entering Product Group / Category at the Lead Creation Stage

    Hi
    Our Client requires to capture the Product Group / Category at the Lead Creation Level.
    At the lead creation level the sales engineer is not exactly aware of the product pricely which the customer wants to buy but knew which Product Group / Category the customer is interested in. So is there any way to capture the Product Group / Product Category at the Lead Creation Level.
    Regards
    Punit Kapoor

    1. Use TCode 0VVW for creating a Z Item Usage, say, ZPO1
    2. Do an item Cat determination in VOV4, as
    Sales Doc type
    Item Cat Group
    Usage
    Item Category
    OR -
    NORM -
    ZPO1 -
    TAB
    3. Maintain Customer Materials Info Record by using VD51.
    In item screen for Cust-Mat combination maintain Item usage
    Regards
    JP

  • Error while creating a product group--Batch input error 9

    Hi,
       While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
    Thks,
    Nilesh

    Hi Neel,
       As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
      Thks for yr help.
    Regards,
    Nilesh

  • How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

    Hi All,
    In CRM Web UI,  there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under  “Product” tab=> Product Group ID field.
    Web UI Component Details -
    UI component : TPMOE
    View : TPMOE/ProductEOL 
    Context: PRODUCT  Attribute : -PRODUCT_GRUOP
    Click on Product Group ID field then below F4 Help screen appears.
    In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
    Current technical design for Product Group F4:
    a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1”  is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
    b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
    c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
    Requirement :-
    In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
    System should query for products  with all selected product group, transferred to product list tab.
    Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
    Can we enforce same behavior like DDIC search help in Web UI too  Or suggest how we can achieve this requirement?
    Thanks in advance
    Regards,
    Arjun

    Hello All,
    We have achieved this requirement by Custom development and approach followed as  -
    Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
    Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT      
    Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
    Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
    e.  Called F4 application for field product _group with help component usage created in step d.
    Regards,
    Arjun

  • Error while creating product group

    hi,
    i am getting error while creating Product group.
    Required parameters missing when calling up module
    Message no. M3749
    Please suggest me.. how to cop this
    Regards,
    amit

    Dear Brahmankar,
    I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
    Please suggest me , this process is correct or it will create any problem in any module .
    Thanks & Regards
    Prabhakar

  • Product Group capacity can not be seen in MF50 output

    Dear All,
    I can not see the product group in 'total capacity' subscreen in output of planning table MF50.
    In MF50 the input parameter i am entering is product group and plant.
    In the scheduling tab of input parameters detailed scheduling and capacity planning is tick.
    For some product groups i can see in output as "Product Groups / Total Capacity" and also in the rows below it shows "Prod.Grp XYZ" then requirement and available quantity rows. After which the production line rows follows.
    For some product groups when enter in initial selection screen of MF50 with same input parameters in output i do not see Product group but i can see "Total Capacity Data" and then the rows starts with production lines. But no information on capacity of product group.
    The setup of all product group is same and are created with MM01.
    Regards,
    Vero.

    Hi Rupesh,
    Thanks for reply.
    In 'Control Tab' i am not selecting any parameter. So in output i can see all materials  in 'Material Data' section which are included in product group  irrespective of requirements.
    I have issue in upper half section of 'Total Capacity Data'. I can see the different production line rows with Requirement / Available rows with capacity values in each period. Unit is %.
    But i do not see 1st row for Product group row with 2 subsequent rows (requirement / available) with unit KG.
    I can see these rows only for some product groups but not for all.
    For the product groups for which i do not see these rows have capacity requirement in selected periods which can be seen in same output in production lines rows. (where selection in input screen is product group and plant)
    Regards,
    Vero

  • Report for list of Product groups

    Hi,
    I wanted to have complete list of all the product groups (created thro MC84) and its members in one report.
    Is there any standard report avl in SAP.
    Regards
    Rishi

    Hi,
    Try using transactions - MC71, MC72 and MC73.
    Revert back.
    Rgds,
    Shrenik

  • APO: RRP3 automate Production order creation from planned order ?

    Hi everyone ,
    I have got a business requirement in APO where in Open sale orders uploaded in R/3, needs to be converted to Planned order and subsequently to Production order in APO-PPDS tcode RRP3 at all stages. They want to automate this process rather than doing it
    manually.
    Can anyone tell how is this possible . Any BAPI or function module available to do this . Please help.
    Regards,
    Syed

    Hi,
    1.You need to run the heuristics Planning of standard lots SAP_PP_002  in /SAPAPO/CDPSB0 by specifying the time profile
       and  strategy profile, planning version and propagation range, product and location.
    2. Convert PPDS Planned Orders created to process orders thru /SAPAPO/RRP7 by specifying the product location start date of the order for production order creation.
    Out put of step 1- For sales order requirement, PPDS Planned orders gets created.
    Out put of step 2- PPDS Planned orders are converted to production orders.
    Thanks,
    nandha

Maybe you are looking for