Regarding Production order changes work flows

Hi to all,
I activated WS20000387 work flow template. its regarding the production order changes .
briefly: i created one production order, immediately assigned person will get a message in his SAP inbox.
he has to double click/execute on that mail, then system will take u directly to the production order screen. there is no need to enter that Order no.
but here, after double clicking, system is asking The Order no.
we have clients 300,500 and 700.
i executed same work flow in 300 successfully,
700 is not modifiable. thats y i did all the settings in 500 and copied the request to 700.
i am getting  the problem in 700,, i compared all the settings in 300 and 700, but no use,,,all are same,,,but not executing in 700.
anybody can help me in this regard.

You Can use below FM to confirm Production order and it is very simple BAPI.
BAPI_PRODORDCONF_CREATE_HDR -> just check in where used list.
Thanks
Seshu

Similar Messages

  • Production Order Changes...

    I need the ability to identify changes made to a production order and the user that made the change.  There are instances of incorrect changes being made to production orders with no way to identify the user that made the change.  As examples, components are being 'final issued' but no one knows who set the 'final issue' indicator.  Labor hours are changed with no traceability to the user who made the change.
    SAP contains the capability to track changes to material master data, BOM data, and routing data.  Is there the same capability for production order data?

    Dear ,
    You need to activate Order Change Managment-SPRO-Shop Floor Control -System Modification  in case to trak production order change :
    A.Enhancements for Order Maintenance
            1.Enhancement for the Display/Change of Order Header Data
            2.Check Changes to the Production Order Header
            3.Checks Changes to Order Operations
    B.Enhancements for Order Change Management (OCM)
             1.Check Conflict for Change Step
             2.Definition of Comparison Fields for Order Comparison
    C.Enhancements for Order Confirmation
    Otherwise , from Basis side you can trak by
    1.ST03
    2.STAD-Provide  SAP T-code , user id , Client .Here you can find out what are the changes user did for any production order based on SAP Trxn .
    Regards
    JH

  • Send production order changes to external system IDOC

    Hi,
    I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
    but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

    Hi Swathi,
    A very high level idea.
    You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
    Regards,
    Chinna

  • AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

    Hi Experts...
    Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
    I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
    I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
    In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
    Folks need your expert comments and valuable suggestions....
    Thank You...
    Lucky

    Dear
    You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
    Refer : Re: Production order changes history
    Production orders
    Regards
    JH

  • Deactivating production order changes after 1st operation is confirmed

    Hi,
    I want to deactivate production order changes after 1st operation is confirmed through CO11n.Ie. production order qty should not be allowed to change after 1st operation is confirmed.
    Expecting ur immense help on this.
    Regards,
    JS Karthi

    Dear ,
    PPCO0007
    EXIT_SAPLCOZV_001 Exit when saving production order
    Provide the restrictions in coding, so that when saving the order check for the order status PCNF or CNF and quantity change.
    Check thread
    first operation confimed - after system allowed changed order qty
    Regards,
    Ishwar

  • Production order change

    Dear All,
                      I want to restrict  the changes made to the order once it is released how can i do it?
    Vinit

    Dear ,
    What are  you looking for in production order changes ? Is it qty ? Is it Component ?
    I think you don't have to use OCM, you can also use the modification which is provide by SAP in SAP note 390635
    I hope you can restrict at user level changes in various screen variant  by appling User exit .You need to take the help of ABAPer to utilise the user exit in CO02.
    1.You may use user exit EXIT_SAPLCOBT_001 -(PPCO0007).You can make use of the exception NOT_ALLOWED_WITH_ERROR in this exit
    2.PPCO0012 Production Order: Display/Change Order Header Data
    3.PPCO0018 Check for changes to production order header
    4.PPCO0019 Checks for changes to order operations
    For farther information , you can goto  T code CMOD - Project Managment of SAP Enhancements- Click on Utilities in the menu bar - SAP Enhancements - under Exit name Give  * ,remove maximum number of hits value from 500 and execute.Select one which suits to your requirement.
    Hope this will be useful to you
    Regards
    JH

  • User exit to populate profit center in production order change (CO02)

    Hello,
    The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
    Is there a user exit /BADI that can acheive this requirement?
    Thanks a lot for your advise.
    Joe

    Hi,
    Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
    HEADER_EXP-PRCTR
    Thanks,
    Shailaja Ainala.

  • About production order change historic records

    The users want to know about production order change historic records.how can I get it, please do me a favour. Thanks.

    Hello ,
    Look into:
    SAP NOTE: 1407961 and
    History of production order changes
    Please search the forum first for such questions.
    - Pushkar
    Edited by: Pushkar Patil on Aug 6, 2010 9:56 AM

  • Production order changes Tracing

    dear all,
    in the production order how can i find out who make changes like delete materials if there are many people can use co02 , I need to make a tracing to a particular order , is there's any log to do this?
    thanks in advance
    Milad

    There is no std T code available for check the changes made in production order
    IF you want you need to activate the OCM or apply the note 390635
    please refer below thread
    Process Order Change Log history
    Re: Production Order Change Management

  • Production order change document

    Hi experts,
    Can anybody please tell me where I can get change document for production order.
    I have first created order & then saved it. Later on I changed BOM component quantity.I didn't get any change document in GOTO--Change document. Where I faced message - No change process found for order 1000470.
    Please help.

    Hi,
    You will be able to get change documents, if you're working with Order Change Management. If not, then you will not be able to get the same.
    For OCM, you would need to configure the profile in OPL7 & OPL9, assign the same in material master. Then you will be able to manage changes via COCM.
    To understand better, refer to the link
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/3699761bc211d2b62b0000e8359890/content.htm
    Hope the above helps.
    Regards,
    Vivek

  • Production order changes tracking

    Hello All,
    How can one track the changes made in the production order such as component add/deleted, qty changed, operation added/deleted?
    Except OCM.
    Regards,
    Mayur

    Hi Frind,
    Plant maint & custmer services -- Maintenance and service order -- functions and settings for order type -- define change doce, collpurchase req indeciator operation Ho
    here select u r plant and order type  and tick on MatStatchange Doc
    now go to u r production order  GOTO tab-- change manangement
    here all change made got recorder , but if u made recording on it will give huge lode on system,concern with BASIS people before changing , it work for me try this
    Regards,
    Girish

  • Regarding production order closing and demand closing

    Hi Gurus,
    I am new to pp module..
    I have the requirement on production order closing and demand order closing.
    The requirement needs plant,reuirement plan no ,basic finish date and percentage in selection screen.
    In the output display plant,requirement plan no,PIR No,order,order finish dat ,***.order qty,***.delivered qty,qty difference,percentage%,order status as in alv grid display.
    And in the output it has 2 buttons named technically complete and demend close .whener user click on first button system should take all the orders which r selected to the program with the same reuirement plan as for the selected order and then technically close all the orders with the same reuirement plan number.
    when user clicks on demand close button,system should take the respetcive requirement plan number,order finish date and material and it has to take the pir no which match the above and deactivate the pir and save.
    I need the help about this.
    Thankx in advance.

    Dear Chandu,
    First settle the production order using the T Code CO88,and then close the production order.
    Prerequisites
    Prerequisites for setting the CLSD status are:
    The order must have the status Released (REL) or Technically completed (TECO)
    The order balance must be 0
    There can be no open purchase requisitions, purchase orders or commitments
    There can be no future change records from confirmation processes
    Regards
    Mangalraj.S

  • Production Orders Changes Log

    Hello,
    I would like to know if there is any Standard way in SAP to be able to see the modifications for a production order. I would like to see modifications in quantities or components.
    Does anybody knows if it is possible to retrieve that information in a standard way?
    Thanks

    Dear
    Changes in Production Order can be  traced through following ways :
    1.Order Change Management :
    Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
    Create a Change Number CC01 with Release Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
    Then go to Oder Change Process T Code :- COCM
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on Procurement element icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Use COCM1 to find out the details or CO03--Extra --change
    Please check link  : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
    2.To  get the changes in Production Order apply SAP Note 390635.
    3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
    Regards
    JH
    Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

  • Production Order Change Management

    Hi ALL,
    Dealy need of following.
    How the changes to the production order can be viewed?
    Is there any tcode to check this ?
    Regards,
    MHP

    Dear Manish,
    In a standard system it is not possible to track the changes made to a production order.
    However, this can acheived in following ways.
    1.We can develop a custom made report to track changes made to an order.Please check this with your ABAPer.
    The overview of a report will be such that one can analyse the items added,deleted,new items inserted etc.
    2.We will be able to achieve this by order change management.Refer the following link.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/41/3699761bc211d2b62b0000e8359890/frameset.htm
    Regards,
    Joseph Charles Vaikathussery

  • Production order - change standard screen

    Hi Gurus
    Please advise.
    User wants to use
    Start Time (CAUFVD-GSUZP) and Finish Time (CAUFVD-GLUZP) on Production Order Creation screen (transaction CO01). In standard these fields are closed (only displayed as 24:00 for Finish time and 00:00 for Start Time).
    If we open these fields (change standard screen) and enter the values - what are the impacts?
    Thank you.

    Hi Oleg,
    I wanted to know what the requirement of User so that you want to change the time mentioned in the order. Because this the time earlier and latest time suggested by the system.
    Regards,
    shailendra

Maybe you are looking for