Regarding purchase order creation using me21n
Hi,
I want to set default values for Purch. Org for a document type PO:Service-FREIGHT in me21n transsaction.
which userexit or badi can be used for this?
When a document type PO:Service-FREIGHT is entered, Purch. Org should have deafualt value set automatically..
Through 'Personal Settings' it is possible but it applies for all document type..& I need it for dot tytpe
PO:Service-FREIGHT .
Thanks in advance...
Hi
Go to me21n transaction.
click on personal setting icon.
Once that is done -select default balues tab.
And you can save the settings here.
Check out this link:
http://home.netlinc.org.uk/ContentStore/__Public/Documents/0022100/22147/C2-C4%20ME21N%20CREATE%20PERSONAL%20SETTINGS.pdf
Regards
Neha
Similar Messages
-
Error in : Purchase order Creation using BAPI_PO_CREATE1
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
* Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
* Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP.Hi Shareen,
I think in the following parts of the code,
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = <b>i_ekpa[].</b>
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
<b> poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa.
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi
poitemx = i_bpoix
poschedule = i_bpos
poschedulex = i_bposx.
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP. -
Regarding purchase Order Creation
Hai Guys,
I have created a purchase order directly using se37 (transaction) BAPI_PO_CREATE1 and i am getting a message as
Standard PO created under the number 4500000031. when i saw in the table it is not updating in the table.whether to use any transaction commit bapi inorder to get updated in bapi. if so can u pls suggest me where to use that or how to get the Po number get updated in the table.pls suggest me.
Regards,
selvamuthukumar.NHi
in Se37...after you enter the FM in Display mode..In Menu> Function Module>Test-->Test Sequences.
Now, give the PO BAPI first and then BAPI_TRANSACTION_COMMIT. Now, execute the BAPI's one by one.
And then check in the tables.
Regards,
Vishwa. -
Drop ship purchase order creation using Pl/Sql code..
Hi,
We are creating the purchase order for drop ship orders.
1. Created order with line source as external and then we ran the workflow backround processor which created a requisition for the order, using this requisition we are trying to create a purchase order with autocreate functionality by using PO_INTERFACE_S. Is this the way to create a drop ship po from backend.
Can you please suggest any other way.
Thanks in Advance.
jagdish.Hi,
You can customize the workflow such that it creates PO automatically, by selecting the attributes "Is PO Auto Creation Allowed?" to create PO after the requisition is created.
Requisition Import will call PO Create Documents w/f to create PO.
Plz get back to me if any clarification is needed. -
PURCHASE ORDER CREATION USING ALE ( BAPI )...
HI,
I DESPERATELY NEED SOME ADVISE IN CREATING A PURCHASE ORDER USING ALE....I AM VERY NEW TO ALE SO CAN ANYONE EXPLAIN IN STEPS WHAT TO BE DONE IN DETAIL....PLS HELP ME OUT IN THIS REGARD....I WILL GET SOME DATA AS INBOUND IDOCS AND I NEED TO CREATE A PURCHASE ORDER USING ALE USING BAPI( BAPI_PO_CREATE1 ).......HOPING A QUICK REPLY ASAP.....Hi Gianluca,
I need to do the same as per the original post and your answers gets me halfway there. My remaining question is how to get the PO to output the PORDCR messgage on the outbound side (also a SAP system)? Or do you have to output the PO as an ORDERS message and map that to the PORDCR message in something like XI or other middleware?
Thanks for the help.
Johan -
Purchase Order creation using Contarct
Hi,
The refer the following scenario:
We have created two company code 1000, 2000; both having diferenet Currency.
We have created Plant 1000 under Company Code 1000 & Plant 2000 under Company Code 2000
We want to create only one Purchase Organization 1000
We want to create one contract for Purchase Organization 1000.
Using the same Contract, we want to create Purchase Order for two different Plants 1000 & 2000.
Is is advisable/ possibe to create Purchase Order for two different Plants 1000 & 2000 belonging to two different Company Codes having different Currency using common Purchase Organization?
Regards,Hi,
Thanks for the reply.
I have created a Purchasing Org COMM.
I have not assigned it to any Company Code
When I am creating a Contract using ME31K, afer entrering Vendor, Agreement Type, Agreement Date, Purch. Organization & Purchasing Group, the System gives a pop-up with the following message:
The purchasing org. COMM has not been assigned to a CoCode Please enter a company code
What does it mean?
As per my thinking, we can create the Contract for one company code, say 1000;
Down the line, now we want to create Purchase Order for the Plant 2000, which is not assigned to Company Code 1000 --- Will the System allow us to do the same??
Regards, -
Issue regarding Sales Order creation using bapi BAPI_salesorder_createfromd
Hi Experts,
Can anyone help me what is the data I'm missing in creating sales order?
I tried to create sales order using BAPI_salesorder_createfromdat2 and I recieve error regarding my creation.
here's the lists of RETURN for the BAPI.
"SALES_HEADER_IN has been processed successfully"
"SALES_ITEM_IN has been processed successfully"
"SALES_CONDITIONS_IN has been processed successfully"
"The sales document is not yet complete: Edit data"
Iam not able to get the message ""The sales document is not yet complete: Edit data"
Please help in this regard.
Regards,
SaktiThis is because you are still missing some segments or data.
Maybe this thread will be helpful:
BAPI_SALESORDER_CREATEFROMDAT2 to replace VA01, KBETR and NETWR
You should also check the documentation from transaction BAPI. -
Regarding Sales order creation using Material with Parent-child
hey guys
i cannot create sales order for parent child material using Below bapi(BAPI_....ORDERDAT2).
Could you please tell me if any special parameter should be set with this bapi
to create the order for PARENT MATERIAL AND child materials.
i am able to create parent-child material order using VA01. but cant using BAPI
just for information I am passing Parent materail alone to the BAPI.
can somebody give suggestion.
ambichanHi AMBI ,
SAP will explode the Sales BOM while creating the Sales Order.
useful Tcodes : CS03.
Bom Usage : 5.(sales Bom)
Regards
prabhu -
Regarding scrap order creation using transaction co07
Hi,
I am creating scrap order (Production order without material)
for production order 009100008331
For Production plant :E170,
Sales order :12
SO Item : 0020
order Type : ZP03
using transaction CO07.
But it is giving error "Production scheduling profile does not exist for plant E170, order type ZP03'.
Can anyone tell me the solution for this error.Do we have to give Production scheduling profile manually or will it be copied from production order 009100008331?
Thanks in advance.Hi AMBI ,
SAP will explode the Sales BOM while creating the Sales Order.
useful Tcodes : CS03.
Bom Usage : 5.(sales Bom)
Regards
prabhu -
Purchase Order Creation using BAPI BAPI_PO_CREATE1.
Hi All,
We are trying to create a pruchase order with the below line items.
Example:
Line item Material Quantity Price
10 MATNR1 1 53 --> should be 59
20 MATNR1 1 53 --> should be 59
30 MATNR1 1 53 --> should be 59
40 MATNR1 1 53 --> should be 59
50 MATNR1 4 53 --> Correct price based on the quantity 4.
In the above example as the total quantity is more than 4 ( consolidating the 5 line items ), the price for each line item is picked from the Info record applying the scaling condition for quantity 4. Standard SAP will consolidate the quantities based on Service material, Purchase Organization, Vendor and Plant and pick the price based on the scales from Info record.
The expected out put is.
Line item Material Quantity Price
10 MATNR1 1 59
20 MATNR1 1 59
30 MATNR1 1 59
40 MATNR1 1 59
50 MATNR1 4 53
Please help us in knowing on how to populate the bapi to get the Expected output.Hi All,
We are trying to create a pruchase order with the below line items.
Example:
Line item Material Quantity Price
10 MATNR1 1 53 --> should be 59
20 MATNR1 1 53 --> should be 59
30 MATNR1 1 53 --> should be 59
40 MATNR1 1 53 --> should be 59
50 MATNR1 4 53 --> Correct price based on the quantity 4.
In the above example as the total quantity is more than 4 ( consolidating the 5 line items ), the price for each line item is picked from the Info record applying the scaling condition for quantity 4. Standard SAP will consolidate the quantities based on Service material, Purchase Organization, Vendor and Plant and pick the price based on the scales from Info record.
The expected out put is.
Line item Material Quantity Price
10 MATNR1 1 59
20 MATNR1 1 59
30 MATNR1 1 59
40 MATNR1 1 59
50 MATNR1 4 53
Please help us in knowing on how to populate the bapi to get the Expected output. -
Purchase order creation - Account assignment group C (Sales Order)
Hello Gurus
During the purchase order creation in Me21N, account assignment category C (sales order) is available. In which scenario we will use it. When I assign C system is asking for a GL account. Why system needs a GL account, and how the posting will be at the time of goods receipt. Thanks for your help in advance.Hi,
Creation of Purchase Order with t.code: ME21N with account assignment category C (sales order) is used for Time and Material Expenses with third party scenario and you need to enter sales order number and respective G/L account . In this scenario 1st a sales order is created with a material( material created DIEN material type) & then purchase order created with respect to sales order.
Here you provide service to your customer and this service you procure from your vendor, you just play middle role for providing and getting service.Standard DIEN material type designed for Sales usage only, so you create sales order for service material.Service master is used to get service from vendor with item category D with proper account assignment category as C
Example:
Material type DIEN is used for when you offer "SERVICE" to your customer.( The steps are (VA01,VF01,VF04,F-28), If u used HR module( you can used with sales order with t.codes are: CAT2,CATS_APPR_LITE,CAT7,PR05,PRRW,PRFI)
Service Master records(AC01)ESM is used when you procure "SERVICE" from your vendor.( Steps are: ME21N with Item Cat. "D" with Acc. ***. Cat. "C", ML81N,MIRO & F-53).
Regards,
Biju K -
Keep Original Position Numbers in Purchase Order Creation
Hi community, i'm trying to solve the following problem in purchase order creation using BAPI_PO_CREATE1:
I'm loading a file with several order numbers and positions to be created in R/3. This file has a structure similar to:
OrderNumber;PositionNumber;Material;Quantity;Unit;.......
The purchase order is created successfully, but i need to keep original position numbers in the order. i.e:
Supposing this input file:
1900;08;993322;10.00;KG.....
1900;13;994455;12.00;KG.....
the positions in purchase order are created as
00010
00020
But i need positions to be created as:
00008
00013
Any ideas?????
Thanks you for your cooperation
LeonardoHi Leonardo,
I doubt if that is possible.
You can have the configuration set up to set the Item Number Interval to step size like 5,10,15 etc,
based on this value, your line item number will be
5,10,15,20...
10,20,30,40..
15,30,45,60
etc.
to set this value, you should go to SPRO.
Material Management->Purchase Order->Define Document Types
Regards,
Ravi Kanth Talagana -
Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation
Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.Hi,
Check the sample code..
report zpo_test .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
exporting
poheader = header
poheaderx = headerx
importing
exppurchaseorder = purchaseorder
tables
return = return
poitem = item
poitemx = itemx
poaccount = account
poaccountx = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
write / return-message.
endloop.
Regards
Sudheer -
TABLES USED IN PURCHASE ORDER CREATION
Hi all,
I want to know the tables used in purchase order creation header line.
Those which are refereed by structure mepo_topline
especially...
mepo_topline-superfield
MEPO_TOPLINE-ebeln etc.....
Looking forward to hear from you all.
regards,
VKChi,
you can check in the include : MM06EFTO Form routine
FORM mepo_get_topline USING ex_topline LIKE mepo_topline
Its referring MOVE-CORRESPONDING ekko TO ex_topline.
so it is EKKO table.
sometimes it refers to EKBE table also.
Regds
Sivaparvathi
Please reward points if helpful.. -
Getting IDOC after Purchase Order creation
Hey,
i need to get the XML-data from the IDOC which is created right after the creation of a purchase order with TR ME21N.
I tried the following user exits:
MM06E001- EXIT_SAPLEINM_002
MM06E001- EXIT_SAPLEINM_011
but it seems the program doesnt run into them, even if they're active as exit in my project.
Can anyone tell me how can i do that ? Maybe over an event ?
thanks and any help will be rewarded,
oliverHi Tejas,
I do not know about Trading Contract but what all I can say it that Check if Change pointers are getting written Once the PO has been created, If "Yes" then probably you do not have to do anything for craetion of Purchanse Order. You can use RBDMIDOC Program to create IDOCs from change pointers.
Refer [this|http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm] for more information on change pointers.
Regards
Shital
Maybe you are looking for
-
I had previously had years worth of Christmas music in my iTunes. When not the holiday season I obviously deslect it so that it does not play. I thought it was all backed up to the cloud, but now upon trying to recover it and resync it to my phone fo
-
Photoshop Elements 10 download slow
I just bought Photoshop Elements 10 today and it has been downloading for almost 3 hours. It was almost done, then it started all over again. Is this normal?
-
Mac Pro won't start; please help!!
Had Mac Pro for 6 months. All was going well until today. Then I noticed my Mail application was not sounding a chime when mail came in. I repaired permissions and re-started my computer. Only it did not re-start. I got no start-up chime and after th
-
Can't install the correct plug-in for my phone!
Hello there, I have downloaded the correct plug in for my phone (Nokia E65) from nokia website mac section. During installation, the following error appears : ( Please update to the latest version of iSync using Software Updates ) i have iSync 2.4 an
-
Table with planning definition?
Hi friends! Does anybody know where I can found any table, report or transaction, in wich can I see the planning definition? (ie: all the characteristics in each planning level, all de aggr levels, etc) Thanks in advance!