Regarding putting two infobjects which differntiate the datarecords in CUBE

hai
i have to two infoobjects which makes composite key(i.e, those two infoobjects differentiate the datarecords from oracle source tables) .
so during modeling of ODS , i put these two infoobjetcs in Keyfields which differntaite the datarecords.
But how i put these two infoobjects in InfoCUbe so that those will differentaite the datarecords .
pls tell me it is very urgent.
rizwan

Hi,
You can look into the creation of a compunding key for the characteristics. In the characteristic maintenance screen, just insert the characteristic to be compounded in the COMPOUNDING tab.
eg, insert controlling area as a compounding characteristic for profit centre.
->> thus for different controlling area you can have the same value too.
eg.
CA01/1000 (controlling area/profit centre)
CA02/1000
Hope this helps.
Cheers,
Gim

Similar Messages

Can you put two iTunes libraries on the same computer? what is the best way?

Is it possible to put two iTunes libraries on the same computer? What is the best way to do it so the two libraries are not connected?

MSGTN wrote:
Is it possible to put two iTunes libraries on the same computer?
yes.
What is the best way to do it so the two libraries are not connected?
give them distinct names. launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder of the desired library.
FWIW, there are 3rd party apps that help with managing multiple libraries, notably:
PowerTunes
iTunes Library Manager

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

How can I put two icloud accounts in the same pc?

Hallo, I have two icloud accounts, one for me and another for my wife, and I would like to put the two accounts in the same pc, because I want to share all the photos of the two accounts with the pc automatically, but I do not know how to do this. The icloud panel only let me to put one account, and if I want to put another account I have to put out before the first account.

I found some clues last week in these linkes.
http://forum.java.sun.com/thread.jspa?threadID=657406&tstart=150
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html#java
Which has the contents like the below:
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
I tried the method of change the control panel but they did not work either.
Any other helps?
Thanks in advantage.
Message was edited by:
daiwill

[solved] question about two soundcards which use the same module

Hi
I have two external soundcards, an Edirol UA-25 and a MAudio Transit. Both use the snd_usb_audio kernel driver. When I only had the MAudio, I configured it to be soundcard number 2 with the following in /etc/modprobe/modprobe.conf
options snd-usb-audio index=2
Now I'd like to have one be soundcard number 2 and the other one soundcard number 3. The internal soundcard is number 0, my tv card is number 1, I don't want to change that.
How can I do this?
Last edited by Army (2011-08-26 16:31:10)

Ok, works. For documention, here's what I did:
If you have two (or more) soundcards, which use the same kernel module, this is what you need in your modprobe.conf (or call this file just like you want, it only has to be in /etc/modprobe.d and has to be called *.conf)
options snd-usb-audio index=2,3 vid=0x0582,0x0763 pid=0x0074,0x2006
This is what I have now. Index is the number of the card, e.g. you see those numbers in alsamixer when you press F6. The vids and pids you can get with
lsusb -v|grep idVendor # this is for the idv
lsusb -v|grep idProduct # this is for the idp
Just pick the line which stands for the soundcard, put these ids into the *.conf file and you're done. Now it doesn't matter in which order you plugin the soundcards, they get the right index.
Quite easy after all

Can't put two 5508 WLCs in the same RF group

Hi experts,
I have two 5508 WLCs and I want them to be backup to each other. I put in the same "RF Group Name" and even the same "Default Mobility Domain Name" however under Wireless -> 802.11b/g/n -> RRM -> RF Grouping each controller still only have themselves as the only memter to the group.
Two controllers are having management IPs on the same subnet 192.168.161.x/24. AP-manager interfaces are in the same network as well. They can ping each other fine. The following screen shots show the current relavent config on the controller:
I do have two controllers in the same mobility group and they are both showing up...
Does anyone know why they can't add each other to the RF group? All other settings are pretty much default...
Thanks!

Hi,
is there a chance that one of the 2 WLC doesn't contain any access point ? Or that the APs from one WLC are not physically close to the APs of the second WLC ?
The point of RF grouping is to exchange RF information, to make RRM decisions together and to know what ap is a rogue and which is not. RF group information travels over the air from AP to AP.
So if a wlc has no ap of if its APs are not close to those of the other WLC there is both no point in grouping with the other WLC in rf group and also no technical way of doing so.
Regards,
Nicolas
===
Don't forget to rate answers that you find useful

Putting two OSX's on the one drive...

I have just bought a macbook pro and still have my Powermac G5 and am now straddling the intel/powerpc fence.
I have an external firewire drive that I use as a diagnostics drive on which I have installed OSX and a couple of troubleshooting apps (diskwarrior and techtool pro primarily).
Now I think I'm going to need both intel and powermac installs of the OSX... What I'm wondering is.. can I do it without partitioning the drive?
Chris

Apparently, even though Apple doesn't say it is supported, Intel Macs can boot from an Apple Partition Map (APM) partition scheme. (This was discovered when some folks noticed Intel iMac DVD disks used the APM scheme.) PPC Macs cannot boot from a Partition Table (GPT) partition scheme. Some people have had success exploiting this 'dual boot' nature of Intel Macs to make a universal boot FireWire drive using the APM scheme.
This usually involves repartitioning the drive with two OS versions (Intel & PPC), each on its own partition. (Some ambitious souls have managed to make "universal" OS versions that avoid the two partition requirement, but this has some undesirable consequences, so avoid it if you can.)
The general idea is straightforward:
1. Use Disk Utility's "Partition" tab to format the Firewire drive in the APM scheme, creating two HFS+ partitions (the drive will be completely erased).
2. Boot from a PPC Mac & install 10.4.x on one partition, using a PPC install disk.
3. Reboot from an Intel Mac & install 10.4.x on the other partition, using an Intel install disk.
The "extraordinary measures" come in at step 3, because the Intel installer won't let you install the Intel version of the OS on an APM scheme drive. The workaround is to restore the Intel OS version to the partition using Disk Utility's "Restore" tab. Probably the best way to do this is to install a fresh copy of the OS to an internal partition of an Intel Mac (or to any GPT partition), make a disk image of it, & use that image as the restore source.
In theory, you should be able to use cloning software to copy your working Intel install to the second partition, but this doesn't seem to be an approach anybody has discussed much.
However you do it, you will have to select the correct version of the OS at startup (using the Option key, for instance) for each mac. If you try to start up an Intel Mac with the PPC version of the OS or visa versa, the Mac will crash. This doesn't harm anything (or so they say), but to keep things simple, name each volume with something distinctive (like "PPC Boot" & "Intel Boot"), since your startup choices won't necessarily tell you which is which.
Note that I haven't personally tried this, only read about it (since I will someday want the same capability). Mention of the technique first appeared about a year ago but I have seen nothing since to suggest it still isn't viable. To be on the safe side, check your Intel DVD disks to see if they are APM, which should be a good indication that your Intel Mac will boot from the hybrid FireWire drive. (In Disk Utility, select it & its partition scheme will be shown at the bottom of the window.)
You can read more about this technique at (for example) rentzsch.com: Intel-based Mac Boot Incompatibility or Macs on Intel: Boot Issues. An interesting variation on the universal OS approach can be found at macosxhints.com - 10.4: Create a single Universal binary bootable disk.

HT1473 Please help!How to put two iTunes accounts on the same computer?

I have an Ipod and my mum has an IPhone. The songs from my IPod are backed up on my computer and we would like to have different music, but both backed up on the same computer. How do i do this without erasing all the music etc that is already on my mums phone?

Launch iTunes with the Shift key held down, create a new library, and import her song files to it. Alternatively, create a new user account on the computer, move the song files to a shared area, and then import them.
(104363)

How do I put two devices online at the same time?

Hi, I have just bought the Wireless-G Broadband Router, model #WRT54G. I have everything working except I'm having one little problem. I can only go online with one thing at a time. Once I'm using my computer the PS3 shuts down the internet then vise versa.
How can I make it so I can go online with the PC while playing online with the PS3. Is there something else I'm needing to buy?
Message Edited by Nikko1 on 05-08-2008 02:15 PM

I am having a similar problem. After doing to searching I cam accross this blog:
http://maikelv.be/blog/2007/10/27/ps3-and-linksys-wrt54g-the-solution-2/#more-9
From reading it and the comments it sounds like this is our problem and the solution.
I will be trying it tonight, hopefully it works.

Can we put two tables horizontally in a PDF document?

Hi All,
I have 2 questions regarding PDF document.
1) When I have a table data which rolls over more than one page, it is not properly displayed. The first row of the table is repeated in every page. So there is a problem when a table splits over two pages.
2) Is there any way to put two tables one beside the other horizontally. I have more than 30 tables which has 4 columns and say 6-8 rows. Its taking more no. of pages. If two tables are put side by side, the no. of pages will be reduced.
Please provide your ideas, if any, on this.
Thanks,
Manisha

Not possible in the current release of xMII (using PDF).
It would be possible if you created your report as an HTML page, however.
You can use BLS to write to the file and/or append to a string that builds up your HTML content. You can easily create callable "sub transactions" that take an xMII recordset and convert it to an HTML table, so that you can have reusable pieces (and simpler transactions to build the reports).

Can you put 2 itunes account on the one ipod classic?

Would like to know if i could put two itunes account to the one classic as i canoot seem to be able to combine both itues accounts.

This can happen if the library has been corrupted and rebuilt, in which case you should restore the original library in the manner of Empty/corrupt library after upgrade/crash.
Alternatively see Recover your iTunes library from your iPod or iOS device. If you have all the media in your library already then backup the device, and immediately restore it.
tt2

Installation of Adobe Reader XI using customization tool but looking to put two check marks

Hi guys,
Installation of Adobe Reader XI using customization tool but looking to put two check marks in the signature bottom two options
called Validating Signatures and Validating Certified Documents.
Can't find it in the customization tool and don't want to change this on 650 workstations.
If I could change a registry key or change it in the installation it would help alot.
Thanks for your help!!!
Chris

I am posting this reply AGAIN
My first reply was empty because i responded to the email I received saying this thread (is that the right terminology?) was updated. Obviously that email didn't get added, just a blank line....
Then I replied to this thread directly on Friday and that seems to have disappeared. Maybe I just don't know how to use a computer? Better sell the technology company I own LOL.
Ok so it seems the screen is normal, (not maximized). When I unlock and drop my start bar to one row, then the top of the screen pops down to inside my visible monitor space and it is not maximized. This allows me to drag it to another monitor and then maximize it there, then put my start bar back and relock it. This is the only way I can move the window, if I don't shrink my start bar, then I have zero access to the top bars of the document!
Currently I can not reproduce the problem ( I might have temporarily fixed it with my start bar reducing and then moving documents), so maybe it is permanently fixed....
Maybe a reboot will bring the problem back... It has been intermittent for about 6 months.

Redeemed $25 itunes card, my account was credited for about two minutes, then suddenly the $25 credit had been removed. Attempted to re-redeem the card, which read already redeemed. What happen?? What's my next move??

Redeemed $25 itunes card, my account was credited for about two minutes, then suddenly the $25 credit had been removed. Attempted to re-redeem the card, which read already redeemed. What happen?? What's my next move??

I'm confident that if you have spoken with our Fraud Team directly, that there are the proper wheels in motion to resolve all of the concerns that occured as a result of the fraudulant order on your account. It may take up to 2 bill cycles for all the adjustments to be applied and the changes made to your account to bring the dates and eligibility back to normal, so you should definitely be nearing the end of your wait. Based on your description, it may have been a while since you spoke with them directly instead of the customer service team, so I encourage you to give them a call at your earliest convenience to put your worries at ease. If you need to make arrangements for the charges that appear on your account, our Financial Services Team at 866-266-1445 will also be able to help possibly place a hold on the account regarding the disputed charges so there's no accidental inturruption in your service due to this unfortunate situation.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Data Sets - Is there a way to put two fields in the same row?

I am working on my first Spry Data Set (in Dreamweaver CS4) which, if I can get it figured out, will eventually be used as a calendar on a client's web site. You can see the beginning of the project here:
http://www.rieradesignco.com/calendarlist_spry.html
My question is, can I put two or more fields on one row? Specifically, I would like the part that looks like this...
3
[WED]
Fusion
... to look like this:
3 [WED] Fusion
I tried simply moving the fields (in Design View) so that they looked like they would be in the same row, but as you can see, that didn't do the trick. (You can see what I did here, in the highlighted part of the screenshot: http://www.rieradesignco.com/spryquestion.jpg). I also tried nesting a table within the table on my html data document that contained the three fields I needed - it worked okay, but that just makes the table more difficult to work with. I don't want to simply type the three items into one field, because it will be a long list and they all need to line up perfectly.
Is there another way to do it?

Change the following line to include the red coloured parts
<div class="MasterColumn" spry:repeat="ds4" spry:setrow="ds4" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">
<span>{Dsp_#}</span><span>{Dsp_WkDay}</span><span>{Dsp_Event}</span>
</div>
The add the following style rule to your document:
.MasterColumn span {
display: inline-block;
I hope this helps.
Ben

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.

Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
Be well...

Regarding putting two infobjects which differntiate the datarecords in CUBE

Similar Messages

Maybe you are looking for