Regarding QueueDumps while testing

Hi all,
I got the result/target as QueuesDump while testing my Message Mapping program at Design time for the first time.
then I executed again and it is working properly, My intention is why I got the result/target as QuesuesDump.
can any one provide solution for this
Regards
Harsha

Hi Harsha,
First thing is that what you got is not any error. Even i got the same thing a couple of times. It happens when you have given display queue as well as tested the scenario in the test tab at the same time. In short it displays the output of the display queue option in the target side of the test tab. At least that is what i have noticed till now.
Thanks and Regards,
Sanjeev.
PS : Tell me if you have found anything else.
Reward points if helpful.

Similar Messages

Error while testing the endpoints in Service Registry

Hi,
I am getting the following error while testing the endpoint in the Service Registry
Invalid Response Code: (404) Not Found. The request URL was:"http://<server>:8000/sap/bc/srt/wsdl/bndg_DD73518A3AD471F18558001D0910D3CA/wsdl11/binding/ws_policy/document?sap-client=800". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
I have created an Enterprise Service at the backend and have published to the Service Registry of the CE server , but while testing the endpoint in service registry i am getting error.
Can any one please help me to solve this issue.
Thanks & Regards,
Hamsa Shree

Hi hamsa,
Have you tested the service? If It works, maybe there's something wrong with your destination configuration.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/705459a3-bf1c-2b10-8a9d-d300ada5f0fc
You may find a solution in the above article.
Good luck!
Wenhao

Runtime error in component :IUICMDC while testing

Hello Experts,
While testing the BSP Component :IUICMDC, we have facing errors mention below-
Cannot display view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View TIUICMDC.MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view Root.htm of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
An error occurred during initialization of the application
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
please advice
regds
deb

Hello Hongyan,
Thnx for the reply.
When i tried to open the component in dev system, runtime error is coming but while this component is tried in sandbox this error is not there, can you help to find that diffrence.
One more observation that, RT repository is not loaded in dev while is it sucessfully loaded in sandbox.
NB: one more request , here we are trying to add po_box into this component but AET not supported.
Please advice.
regards
deb

Error 'Program not registered' while testing RFC connection PI_RFC

Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
Syed

Hi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh

Receiving the internal 500 error while testing java web service

HI,
Problem Summary:
Receiving the internal 500 error while testing java web service in integrated weblogic server.
my scenario is like,
retrieve the Payload from Dehydration tables.
We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
I had verified in my Jdeveloper,Proxy settings are available.
Error Payload:
I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
Regards,
Anuj

Error while testing the Service Provider

Hi All,
I have developed a WebService model for Purchase Requisition scenario and followed all the steps of the Duet Developer Guide up to creating the SCL Business Object.
While testing the service on SAP side, when I execute the server proxy and in XML editor I passed the inpur values
Release Group :B1
Release Code : A1 for bapi BAPI_REQUISITION_GETITEMSREL,
Got the errors as below:
- <n0:StandardMessageFault xmlns:n0="http://myDuet.com/xi/PR">
- <standard>
<faultText>Proxy Class (generated)</faultText>
- <faultDetail>
<severity>error</severity>
<text>Non-Retriable Exception with message: The SAP system could not process your request. Contact your administrator</text>
<id>110(/IWFND/CM_COS)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>0 GSI implementations for Object Type 'ZPRGET_ITEMS_REL', Version 'ECC_604', Consumer ''</text>
<url>http://DUETBCCPL.bharathicement.com:8000/sap/xi/docu_apperror?ID=NA&OBJECT=%2fIWFND%2fCM_COS010&LANGUAGE=E&MSGV1=0&MSGV2=ZPRGET_ITEMS_REL&MSGV3=ECC_604</url>
<id>010(/IWFND/CM_COS)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>The SAP system could not process your request. Contact your administrator</text>
<url>http://DUETBCCPL.bharathicement.com:8000/sap/xi/docu_apperror?ID=NA&OBJECT=%2fIWFND%2fCOD011&LANGUAGE=E</url>
<id>011(/IWFND/COD)</id>
</faultDetail>
</standard>
</n0:StandardMessageFault>
And got the status message as
Call Failed
I tested the bapi in SAP Backend system, its working fine.
Can any body look into it where it is going wrong.
Thanks & Regards,
Kris

Hi all,
Issue has been resolved.
Thanks
Kris.

Error while testing SAP Screen Personas Service!

Hi,
I am getting an error message "No system available for your user.Please contact your IT team".
While testing the service "mainapp" under services SAP->bc->bsp->persos->mainapp.
Please reply asap..
Thanks in advance..
Regards,
Chandrababu Katta

Thanks Chinthan,
Finally its working by following one of your reply from the thread
Personas 2.0 SP02 Network Connectivity Error
By impleneting the note 2016378, the problem resolved and Personas working fine now.
Regards,
Chandrababu Katta

Error while testing WEB UI

Hi,
I am trying to configure WEB UI. I have performed all the steps mentioned in C04 and steps mentioned by peter jacks thread.
While testing the WEB UI. I am getting the following Error in my web page::
SSO logon not possible; invalid host name for issuing cookie
Choose "Logon" to continue A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password
please help, rewards will be given surely.
Thanks in advance,
Regards
Suvitha

Hi All,
When i try to test CRM_UI_FRAME in CRM 7.0,Even though i have maintained server properties in host file,Page can not be displayed error as mentioned below.
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
Due to security reasons,i can not change the computer name to SAP server host name.
Thanks in Advance
BR//
Sha

Error while testing the created entity service

Hi
I have an error "access forbidden.please login again" while testing the entity service in the service browser.Please help.
Regards
ms.

Hi,
I think this is not a problem from your end. You please check for another entity service. If you get the same error then this is the problem from server side. If possible please restart the server and try it again.
Thanks
Chandan

Error While Testing the Data from RWB

Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
Sreeni

Hi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj

Error while testing Adapter through RWB with payload

Hi all,
While testing Adapter engine through RWB with payload, i get the below error
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=ec6clnt001;TS=com_avaya_java_bs;AN=StartNotification_MI_sync;ANS=http://www.tcs.com/sap/xi/AVAYAPoC;"
Can any body please suggest the possible reason and solution for the same.
Regrads,
Kulwant

Hi
verify the receiver agreement and also check it out whether receiver message interface is configured properly or not?
or
open ID and goto tools tab in that click on
test configuration by providing your Business service and interface details along with the payload it displays the error message.
regards
Suryanarayana

Error while testing Soap to JDBC

Hi All,
While testing Soap to jdbc i got this error:
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
java.lang.NullPointerException; nested exception caused by:
java.lang.NullPointerException; nested exception caused by:
org.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed.
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:236)
     at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:215)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:386)
     at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:316)
     at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1438)
     at com.sun.org.apache.xerces.internal.impl.XMLScanner.scanPIData(XMLScanner.java:689)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanPIData(XMLDocumentFragmentScannerImpl.java:750)
     at com.sun.org.apache.xerces.internal.impl.XMLScanner.scanPI(XMLScanner.java:664)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDispatcher.dispatch(XMLDocumentScannerImpl.java:845)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1242)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:176)
     at com.sap.aii.af.sdk.xi.util.StreamXMLScannerImpl$EventProducer.run(StreamXMLScannerImpl.java:599)
          ]]></text>
        </s:SystemError>
      </detail>
    </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Regards,
Nutan

Below threads will help u
Re: Error: ADAPTER.JAVA_EXCEPTION - EXCEPTION_DURING_EXECUTE
Re: 401 unauthorized error in webservice scenario
Regards,
Jayasimha Jangam

Error while testing web service

Hi,
While testing the web service from the WSNavigator (CE7.1), I am getting the following error:
nested exception is: java.lang.RuntimeException: java.lang.NoClassDefFoundError: org/apache/commons/httpclient/MultiThreadedHttpConnectionManager : cannot initialize class because prior initialization attempt failed; nested exception is: javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: java.lang.NoClassDefFoundError: org/apache/commons/httpclient/MultiThreadedHttpConnectionManager : cannot initialize class because prior initialization attempt failed
It did worked earlier, but suddenly it results in the error.
Any ideas on resolving it?
Best regards,
Dharmi

It was missing the logging and codec libraries.
After adding it, it works fines.

Error while testing SOAP scenario

I have done SOAP(Sender)--SAP-PI- SOAP(RECEIVER) Scenario. It is in synchorous mode..
It works fine in Altove XML Spy.. and getting the response fron webservice..
but when i;m testing it PI (RWB->Comp Monit>Integration engine-->Test Messge ) it gives me error
" Error While Testing: Method Not implemented "
Can anyone please help me on this.. What acould be the reason.. for this..
Regards,
deep

Sunil, Thanks For your Reply...
Payload is correct.. and mapping is also fine. I'm getting reponse from Webservices using XML SPY..
But i have seen one warning about Integation Engine : Is Websecurity Available : Communication error Proxy calls are not permitted on sender or receiver side on the IS (client) in Component monitoring..
Does this warning cause this error anyway.. ? Because i'm getting error even in XML SPY when i defined business system as Sender and Receiver as Business Service. But if i define both are as Business Serivces.. it works fine.. (in XML SPY)
But in both cases i'm failing in RWB(INtegration engine-:>Test message)
Is there any relation to above mentioned warning " Is Websecurity Available : Communication error Proxy calls are not permitted on sender or receiver side on the IS (client) in Component monitoring.. "
Regards,
Deep

Error while testing FP_TEST_00

Hi,
I configured ADS in my machine where ABAP and JAVA stacks are running on same WAS.
I did so many times but i never faced this error while testing FP_TEST_00 program.
i'am getting this errror
"ADS:com.adobe.processingexception:problem accessing d(200101)
Message No.FPRUNX001"
I checked with the sap notes and some blogs on FPRUNX001 error and i followed those documents where i couldnt find any problem in configuration.
i think problem is with adsuser id but all the necessary security roles and groups are assigned to ADSUser as per the document.
Please guide me with a solution.
With Regards,
Pradeep.B

You are saying abt the HTTP destination which we need to create in Visual Admin right.
Yes i created that FP_ICF_DATA_SID and the url maintained is http://hostname(Abap):portnumber (http port of ABAP),user ADS_AGENT and its password are maintained and when i click on save and test it is giving me the succesfull message.
Infact i tested by extending the url http://hostname:portnumber/sap/bc/fp/fp_test_00.xdp
it is showing me the success message.
yes it NW 7.0
With reagdrs,
Pradeep

Regarding QueueDumps while testing

Similar Messages

Maybe you are looking for