Regarding reading the data from spool

Hi Experts,
How can i read the data from spool?
I need to read the data from the spool and should display on the screen?
Is there any FM to read the data from spool?
Sruthi.

hi please use this..
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
    EXPORTING
      rqident              = v_spool
    TABLES
      buffer               = it_spool
    EXCEPTIONS
      no_such_job          = 1
      not_abap_list        = 2
      job_contains_no_data = 3
      selection_empty      = 4
      no_permission        = 5
      can_not_access       = 6
      read_error           = 7

Similar Messages

  • Regarding reading the data from the files without using Stremas

    hai to all of u...
    here i have a problem where i have to read the data from the files without using any streams.
    please guide me how to do this one,if possible by giving with an example
    Thanks & Regard
    M.Ramakrishna

    Simply put, you can't.
    By why do you need to?

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

  • Reading the data from excel file which is in application server.

    Hi,
    Iam trying to read the data from excel file which is in application server.
    I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
    I tried just reading using open data set and read data set it is giving junk characters.
    Please suggest me if you have any solution.
    Best Regards,
    Brahma Reddy

    Hi Narendra,
    Please see the below code I have written
    OPEN DATASET pa_sfile for INPUT in text mode ENCODING  DEFAULT MESSAGE wf_mess.
    CHECK sy-subrc = 0.
    DO.
    READ DATASET pa_sfile INTO wf_string.
    IF sy-subrc <> 0.
    EXIT.
    else.
    split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
    wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
    wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
    wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
    wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
    wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
    wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
    wa_upload-field34 wa_upload-field35 wa_upload-field36 .
    wa_upload-field1 = wf_field1.
    wa_upload-field2 = wf_field2.
    append wa_upload to int_upload.
    clear wa_upload.
    ENDIF.
    ENDDO.
    CLOSE DATASET pa_sfile.
    Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
    Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
    Please suggest me any other way.
    Thanks for your help,
    Brahma Reddy

  • Reading the data from network card

    Hi,
    java.net defines the class NetworkInterface. Currently there are two network cards, one is wireless and another is for LAN.I am able to retrive their names and IP addresses using NetworkInterface methods.How to read the data from a specifc network card? Can we read all TCP packets which are passed through network card?
    using socket?
    Regards
    prasanna

    pdiwadkar wrote:
    Hi,
    java.net defines the class NetworkInterface. Currently there are two network cards, one is wireless and another is for LAN.I am able to retrive their names and IP addresses using NetworkInterface methods.How to read the data from a specifc network card? Can we read all TCP packets which are passed through network card?
    using socket?
    Regards
    prasannaYou may already know that Java is not good at doing some 'low level stuff'.
    You cannot use (pure) Java to access the raw network data.

  • Populate a table reading the data from a TXT file

    how can I populate a table reading the data from a TXT file?
    thanks

    Hey Kevin!
    Using FORMS.TEXT_IO to bulk load data from a file strikes me as re-inventing the wheel. It is just about justifiable in a self-service environment, but I regard the EXTERNAL TABLE is a better solution for that situation as well.
    The same applies to UTL_FILE. I think the ability to read text with UTL_FILE is primarily intended for read file-based configuration or file manipulation/processing rather than data loading.
    Re-writing a text file into SQL statements is too much like hard work (even with an editor that supports macro definition and regular expressions) for no real benefit. You lose all the bulk load peformance you would get from SQL*Loader. But for QAD I'd probably let you off with it.
    You missed out one obvious alternative: using Java to turn the contents of an XML file into a CLOB and inserting it into a table which is read by a PL/SQL procedure that parses the XML records and insert the retrieved data into a table.
    Stay lucky, APC

  • Flilter webpart to read the data from XML template

    Hi
    Is there any out of the box webpart to read data from xml file for filtering in sharepoint 2010.
    The filter dialog look like following functionality and allow to select only one value.
      .Paretn1
         chiild1
         child2
     .Parent2
         child1
         child2
    Thanks

    Hi,
    According to your post, my understanding is that you wanted to read data from xml file with the out of the box web part.
    There is no out of the box web part for us to read the data from the xml file in SharePoint 2010.
    However, you can create your own custom web part to achieve it.
    There are some articles about the read the xml file, you can have a look at them.
    http://mosshowto.blogspot.com/2008/10/simplify-xpath-use-c-class.html
    http://social.technet.microsoft.com/Forums/en-US/6ae03f7a-23fe-4361-9e4f-d82bd3802ebf/how-to-read-data-from-an-xml-file-in-sharepoint-2010s?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • TO Read the data from the I/P payload of the proxy

    I want to know is there any function module or report available to read the data from the
    payload of the proxy. As we can see the data in the input payload for the prticular
    message in sxmb_moni tcode.Is there any table where this data will be stored.
    And also I have to update one Ztable with XML Message ID,Sender Interface Namespace,
    Sender Interface Name as and when this proxy is triggered. For this I will have to implement the
    class for the interface in the sproxy tcode and in this implementation i will update this
    ztable but my problem is how will i get this values there.
    In debugging I found one report  rsxmb_display_msg_vers_new is submitted in sxmb_moni to show ll these details but
    looking specially foe the paylod data.
    Your help is highly appreciated.
    Thanks.

    Hello PawanG ,
    It is very simple to find out all DB tables involved in the rsxmb_display_msg_vers_new . Steps below:
    1. run tcode SE30
    2. click "program" radio box, input RSXMB_DISPLAY_MSG_VERS_NEW as program name, click "Execute" button.
    3. input an valid message uuid in the "Message GUID" field and execute.
    4. go back to SE30,click "Evaluate" tab
    5. click "DB tables".
    Then all DB table name and description are listed there. I am sure you can find what you need. Good luck!
    Best Regards,
    Jerry

  • Sending AT command from xbee pro to read the data from device

    I am new to serial communications using Labview. 
    I am having trouble with starting up the project, where I have to design the software that involves XBee pro module.
    I need to send the READ command to read the data from a device. Then the software should go to the AT command mode (we enter the AT command mode by entering +++)
    Then I need to read the energy level of the device by entering the command: ATED. The software should continuously read the energy level every 30 seconds, which will be displayed on the front panel. 
    I am not sure where to start the software from. i.e. how to enter the Read command and then the AT command. 
    I am hoping someone can suggest how to start this.
    Thanks  in advance. 

    Hello Manny,
    You could also review the discussion from the link below which may also guide you in a good direction with your project. 
    "Need example vi using AT commands for dialing the modem at the remote end"
    http://forums.ni.com/t5/LabVIEW/Need-example-vi-using-AT-commands-for-dialing-the-modem-at-the/td-p/...
    Best regards,
    Daniel Cabezas
    Applications Engineering
    National Instruments
    www.ni.com/support 

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • Reading the data from BLOB column

    HI,
    I have a table with following structure
    Test_Mail(Attachment BLOB,Attachmentname varchar2(255),FileSize number)
    The data in the table is like
    Attachment|Attachmentname|FileSize
    BLOB|test.txt|1236
    I wants to read the data from the BLOB attachment in to new file.
    can any one help me in doing this with plsql??
    Thanks in advance,
    Balaji tk.
    Edited by: Balaji.tk on Jan 9, 2011 9:28 PM

    May be something like this ?
    DECLARE
       l_file       UTL_FILE.FILE_TYPE;
       l_buffer     RAW (32767);
       l_amount     BINARY_INTEGER     := 32767;
       l_pos        INTEGER            := 1;
       l_blob       BLOB;
       l_blob_len   INTEGER;
    BEGIN
    -- Open the destination file.
       l_file := UTL_FILE.FOPEN ('TEST_DIR', v_attachment_name, 'wb');
       --This v_attachment_name can be selected from your table.
    -- Get LOB locator
    FOR rec IN (
    SELECT attachment   l_blob
          FROM test_mail
         --Your where condition to find the row.      
       --AND ROWNUM =1
    LOOP
       l_blob_len := DBMS_LOB.getlength (rec.l_blob);
    -- Read chunks of the BLOB and write them to the file
    -- until complete.
       WHILE l_pos < l_blob_len
       LOOP
          DBMS_LOB.READ (rec.l_blob, l_amount, l_pos, l_buffer);
          UTL_FILE.put_raw (l_file, l_buffer, FALSE);
          l_pos := l_pos + l_amount;
       END LOOP;
      commit;
    END LOOP;
    -- Close the file.
       UTL_FILE.FCLOSE (l_file);
    EXCEPTION
       WHEN OTHERS
       THEN
    -- Close the file if something goes wrong.
          IF UTL_FILE.IS_OPEN (l_file)
          THEN
             UTL_FILE.FCLOSE (l_file);
          END IF;
          RAISE;
    END;

  • Reading the data from one component view into another component view

    Hi All,
    I have requirement to read the data from one component into another component while creating the service order. Here are the details.
    Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
    I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
    I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
    Refer the attachments for the component link..
    Please let me know how we can achieve this one..
    Thanks,
    Sapsar.

    Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
    Below is the correction code
    IF iv_index IS NOT INITIAL.
         lr_iterator ?= collection_wrapper->get_iterator( ).
         lr_current ?= lr_iterator->get_by_index( iv_index ).
         lr_entity ?= lr_iterator->get_by_index( iv_index ).
       ELSE.
         lr_current = collection_wrapper->get_current( ).
       ENDIF.
    *loop back to root entity
             WHILE lr_entity->get_name( ) NE 'BTAdminH'.
               lr_entity = lr_entity->get_parent( ).
             ENDWHILE.
    *Get the related entity
             IF lr_entity IS BOUND.
               lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
               IF lr_collection IS BOUND.
                 lr_orgset_m = lr_collection->get_current( ).
    *            lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
                 lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
               ENDIF.
             ENDIF.
    Thanks,
    Sapsar.

  • Reading the data from XML Source

    Hi
    i want to read the data from XML source file, and update the transaction information to another XML file. how we can do this in ADF, please help
    Thanks
    nidhi

    you may use normal Java API to do that
    http://www.javablogging.com/read-and-write-xml/

  • Reading the data from dataset

    Hi all,
    Can i read the Data from more than one Dataset at a time ?
    If yes.. How ? If not...Why ?
    Thanks in Advance
    Krish...

    You can open up to 100 datasets at the same time for every internal session.
    For stability, put a TRY...CATCH...ENDTRY on these exceptions:
    CX_SY_FILE_OPEN
    CX_SY_TOO_MANY_FILES
    ...like this:
    TRY.
    OPEN DATASET sapfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    [your code]
    CATCH: cx_sy_file_open,
           cx_sy_too_many_files.
    ENDCATCH.
    CLOSE DATASET sapfile.
    Hope this helps.

  • Reading the data from web

    Hi guys ,
    I am new to j2me ,i am going to start a project named onlineNews
    for this project i need to read the data from web.can anyone help me with a sample code for reading a data from web
    thank u for spending your precious time

    that depends on the used technology on top of the web. I believe with J2ME you have access to the URLConnection class, so you can send HTTP requests manually. Otherwise you will need to use low level sockets, or use webservices such as SOAP or XML-RPC.
    There is a lightweight XML-RPC client available for J2ME. It is no longer in development, but that doesn't mean that it doesn't work.
    http://kxmlrpc.objectweb.org/

Maybe you are looking for