Regarding reports using Report Painter

Hi gurus,
I am new for this reports. I have to create a report for HU's with material number,handling unit number, description and status. I am trying create this report using report painter. I have gone through forums on how to create a report. But there is no standard reporting table for this HU's. To create a report libraries are needed but these are linked to reporting tables. So can any one explain me how to create a reporting table and also report.
Let me know if I am not clear about anything.
Thanks in advance.
Ravi Boppana

Hi,
You can use this link, it describes pretty fair the procedure:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/d1/44f2b5c7f411d296080000e82de14a/frameset.htm
Generally, the technique is the same as for other SQL tools.
Regards,
Eli

Similar Messages

Creation of report using Report Painter

Dear All,
I have a requirement to create a report using Report Painter. I don't have any idea about this.
Could you pls provide me some study materials or Links to study Materials, it could of great help.
Regards
Ranjan

report painter
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
<b>reward points if helpful</b>
Message was edited by: Rahul Kavuri
Message was edited by: Rahul Kavuri

Can you create report using report painter with Tcodes:FAGLL03,FCHN

Hi Experts,
1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
2.i never used report painter can anyone provide report painter pdf for ecc6.0
3.can any oneguide me how to develop report in report painter by using this tcodes.
4.If not possible can i do with report writer?
Regards,
naresh.
Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!

cross posted
Edited by: nareshvarma on Jul 19, 2010 9:11 AM

Unable to compile Move order pick slip report using report builder

Hi, I'm unable to compile the Standard Move order pick slip report using report 6i. I'm getting the error "wrong no of or types of arguments in call to "RUN_DETAIL_ENGINE". Please help.

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Predecessor/Successor Report using Report Wizard

I would like to create a Predecessor/Successor Report using Report Wizard similar to old style pred/succ reports with pred ID with description on top of main activity and succ ID with description below main activity. I currently use version 8.2. Please respond here and direct to [email protected] if you can assist.
Dan

Email sent.

Profit center trail balance report using report painter

HI Experts,
Please let me know steps to write functional specs for creating profit center trail balancing using report painter and also steps to create profit center trail balance using report painter.
Thnaks,
Vani

Hi ,
If that kind of report is not available in sap standard then write functional specification with relavant technical field name and table name with the required logic .Give that functional spec to abapers they will write the technical specification and they will create the required report.
Thanks & Regards
pavan

Functional Area Reporting using Report Painter/Report Writer

Hi,
Could anyone let me know how we can draw up report for a company with functional areas using Report Painter/Report Writer?
Our client wants to draw Financial Statements on the basis of Functional Area.
Thanks & Regards,
Sajan C P

<a href="http://help.sap.com/saphelp_47x200/helpdata/en/5f/b77625a0f811d39755006094b969cf/content.htm">Creating a Profit and Loss Statement with Cost of Sales Accounting</a>
FSI4 for creating forms and FSI1 for creating assocaited reports.
Standard report 0SAPPRALO-01 Annual Profit and Loss Statement by functional area, can be checked, under FSI3 Type 005.

How to popluate user defined values in Paramter field of a report using "Report Server Project", BIDS

Hello,
I am creating report using "Business Intelligence Development Studio", creating "Report Server Project" connected to TFS database.
I have created Variance report and the output of report  as below sample:
Project   Assigned To      Planned Effort        Completed    Remaining Variance
P1            X                        20
10                 5              5
P2            Y                        10
10                 0             0
P3            Z                          5
0                  5              0
By default I made Assigned To as parameter field and its showing data for selection in a drop down box (X, Y and Z) and data also filtered correctly.
Q. how can I fill resource names in a drop down of my own choice (in this scenario, I want to display only X and Y) and display data based on the selected resource? By default parameter displays all the resources which I don't want.
I did the below but could not get correct result:
1. Right Click on "Assigned To" parameter, Clicked on "Available Values" and Selected "Specify values" instead of "Get values from query"
2. Added X as Label and Value as 2 (Employee ID as mentioned in dbPerson table)
Drop down displays X but when I clicked on report, it gives an error...
Appreciate your help on this.
Regards
Abdul Kalam

Hi Abdul,
From the document, we know that CONSTRAINED flag is used to reduce the risk of injection attacks via the specified string. If a string is provided that is not directly resolvable to qualified
or unqualified member names, the following error appears: "The restrictions imposed by the CONSTRAINED flag in the STRTOSET function were violated."
So you need to make sure the members are passed properly to the STRTOSET function. For more details, please see the following links:
http://ch1n2.wordpress.com/2010/02/21/the-restrictions-imposed-by-the-constrained-flag-in-the-strtoset-function-were-violated/
http://www.bp-msbi.com/2010/04/passing-unconstrained-set-and-member-parameters-between-reports-in-reporting-services/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

P & L Report using Report Painter does not run in PRD client ( time out)

Hi SAP Gurus
We created a P & L Statement on the basis of GLPCT table. We incorporated Accounts groups from a financial statemen version using KE5B in profit center accounting.
Report contains Account groups as well as profit centre group.
It takes around 5- 10 minutes to run in DEV client but in PRD it takes a lot of time and times out after a while.
Any suggestions....??
Regards
Satish

Hi Satish,
Use all the Index fields(Profit-center-based index) which are active for the table GLPCT in the Selection screen of the report and use maximum selection criteria.The processing time will improve to some extent.
~Andrew
Good you got the solution from the Basis Team, probably they might have increased the processing time limit of the report.But to increase the efficiency of the program the above will work.
Edited by: Andrew J on Jan 24, 2011 4:53 PM
One more tip for tuning the performance

FI report using 'Report painter'

Hi All,
I am working on trial balance and created the BADI 'G_SET_FORMULA_EXIT' with the filter 'U001' saved and activated. I am now trying to create the variable with FORMULA '#U001' but i getting the following error:
Variable name '#U001' not possible, please check syntax
Message no. GS740
I am not sure what part i am missing. Can anyone please help me out with this? Any docs/Link are appreciated.
Thanks,
Karun

Hi Ajeesh,
Thank you for your quick reply. With your reply i made some progress. I am able to put a break point and debug the BADI. I want the BADI to trigger after the selection screen. But right now it is triggering even before the selection-screen shows up.
This is what i am doing.
1. In the trial balance, we have a single row to show all the accounts. I created a VAR for ACCOUNT#(GLFUNCT-RAACT) and called this VAR in the single row if the trail balance using GRR2.
2. The BADI is triggering before selection screen. I reason i gave at the ROW is i want to calculate the 'CUMMULATIVE BAL' for every account.
3. But in the debug mode i do no see anything as it is triggering before the selection.
Could anyone please let me know how should i call the BADI so it triggers for every account that is displayed the report?
Thanks in advance,
Karuna

Images are not loaded while displaying report using Report Viewer with JRC!

Hi Everybody,
I created a Report designed using CR XI.
I am viewing that report from my application using JRC and crystal Report Viewer and PDF viewer.
In PDF viewer everything is fine including images display, saving etc.
But in Crystal report Viewer, I am not getting the images of the buttons such as export, next page, previous page etc. But all the funtionalities are working.
From where i can load the pictuers and how?
Can anybody help on this?
Thanks in advance,
Saravanakumar.
Edited by: Saravana kumar on Nov 17, 2008 1:23 PM

Hi Saravana
The issue you have posted here in the Crystal Reports Design Forum is a Developer issue. Please post this query to the BusinessObjects SDK Application Development - > Java Development Crystal Reports forum.
Regards
Girish Bhosale

Master Detail Report using Report Query

I am using APEX Report Query component to try and create a mater/detail report with BI plug-in. The Report Queries doesn't give you mush flexibility as each query is independent of the other. I'm trying to see if I need to create 2 queries or 1 AND what option would let me create a master detail report like so in BI Desktop:
Employee: Bob ID:100 Dept: HR
Jobs
Job 1
Job 2
Job 3
Employee: Tom ID:200 Dept: ACCt
Jobs
Job 1
Job 2
Job 3
Option1.
I could combine the Employee Job info with the Employee info, but that would report the Employee info for every Employee Job. I didn't think that was good.
<Rowset1_Row>
<EMPID>
<NAME>
<DEPT>
<JOB>
</Rowset1_Row>
Option 2.
I could create 2 queries. The 1st getting all of the Empoyee info. The 2nd getting all of the Employee jobs.
<Rowset1_Row>
<EMPID>
<NAME>
<DEPT>
<JOB>
</Rowset1_Row>
<Rowset2_Row>
<EMPID>
<JOB>
</Rowset2_Row>
<Rowset2_Row>
<EMPID>
<JOB>
</Rowset2_Row>
Any advice?
Edited by: bobmagan on Jun 1, 2009 5:29 AM

Can you check for the settings please.
Thanks and Regards
Riyas

Link to Interactive Report Using Report Column as Parameter Value

I'm using Apex version 4.0.
I have an interactive report that I want to link to a second interactive report in order to create drill down functionality.
The user will click on a column in the main report called "Insurance Company Name" which will link to the second interactive report and filter for that Insurance Company.
I'm just trying to pass the Insurance Company Name to a Page 0 Item and use that value to filter the drill down report. Pretty simple. I don't want to create a declarative filter on the second IR, if that makes sense. My query for the drill down report is something like:
SELECT *
FROM MARKETS
WHERE INSURANCE_COMPANY_NAME = :P0_INSURANCE_COMPANY_NAME
I can't seem to get this to work-I've created the column link on the Insurance Company Name field in my main report.
The values I have are:
Link Text: #INSURANCE_COMPANY_NAME#
Target: URL
URL: f?p=&APP_ID.:5:&SESSION.::&DEBUG.::P0_INSURANCE_COMPANY_NAME:#INSURANCE_COMPANY_NAME#
It links to the drill down report but the drill down report is not filtering for the Insurance Company Name selected. It's not picking up the value for some reason.
Thanks for the help.

Possibly the value is NOT in session state when you call the dropdown.. Open up your session state menu option in the developer menu and see if there is a value in the Page 0 item..
Why don't you just create a page item on the second IR page and use that in your Select statement instead?
Thank you,
Tony Miller
Webster, TX
What if you really were stalking a paranoid schizophrenic... Would they know?
If this question is answered, please mark the thread as closed and assign points where earned..

A4 Landscape Report using Report Writer

Hi,
We have a problem while printing a report designed for A4 Landscape character mode report.
While printing it is not printing in Landscape even if we set the Orientation correctly.
Can anybody give solution to this?
null

I belive this is a bug in ORacle Reports 6, for this what we are right now doing is we are copying a exsisting report which is done in 2.5 A4 Landscape, deleting entire body and then building it. Even though its a long way , it will serve the purpose

Make a simple report using reports builder

Hello
Any idea for querying of information into database of EBS
I wanna try to make simple reports for our warehouse inventory per month
Thanks

Hi,
Any idea for querying of information into database of EBS
I wanna try to make simple reports for our warehouse inventory per monthWhat is the application release?
What exactly you are looking for? Please elaborate more.
Oracle E-Business Suite tables/views (and all other objects) are documented in eTRM website.
eTRM
http://etrm.oracle.com/
Thanks,
Hussein

Regarding reports using Report Painter

Similar Messages

Maybe you are looking for