Regarding Return of Transfered Mateial to other Co.
Hi, Bhailog
Can anybody tell me about Stock Transfer PO.
I have completed the whole procedure of Inter Company transfer of Material.Now if I want to get return back that material in my stock.What will be the step???????
Weather i should do the same procedure in another company where i have transfered the material or any other procedure is also there??????????
Thanks in advance for your help
Ri
hi
Edited by: Ganti on Jun 13, 2008 6:50 AM
Similar Messages
-
iPhone 5s photos/video,deleting duplicate photos and video transferred from other iPhone 5s & iPhone 4S
I have tried selecting photos and videos to throw them in trash bin, but the trash bin doesn't work when pressing and or clicking on it
I would like to know how to get rid of the unwanted and duplicate pictures that I've transferred from my other iPhones.
If someone could please help me, I would greatly appreciate it !!
Thank you so much,
GingerHow did you transfer the photos from your other iPhone? If you did it by importing them from the old phone to a computer and then used iTunes to sync them back to the new phone, then you would delete them by syncing again using iTunes but this time change the selection of which photos are to be synced. Each time you sync using iTunes, it sets the non-Camera Roll photos on the phone to match the current settings/selection in iTunes.
-
can someone help me
Manieri28 wrote:
I have two accounts for iTunes and i got my music transferred to my other account
How did you manage this? -
Dear Sir / Madam.
I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts are not transfering. But other data is transferred.
How can I transfer the contacts to iphone 3.
Thank you.
Dr.Jegamohan.You are syncing contacts or trying to sync contacts how - direct with a supported address book app on your computer via the iTunes sync process, which is selected under the Info tab for the iPhone sync preferences with iTunes?
-
Modifying TS CALS from 20 TS CALS transferring 10 to other server
Modifying TS CALS from 20 TS CALS transferring 10 to other server.
Please help can we transfer half of 20 TS CALS to other server?
Kindly advise :)Hi,
Thank you for posting in Windows Server Forum.
What’s your TS server OS version? Which CAL you have (Is it Per User or Per Device CAL)?
For moving CALs from one server to other. You must see that License server is installed on other server. Also the License server must be activated before you move the CALs. You need to specify the target server and might need to call MS Clearing house and explain
them the whole scenario and they will help you in your case.
Move Remote Desktop Licensing to a New Server
http://technet.microsoft.com/en-us/library/cc730776.aspx
Migrate client access licenses
http://technet.microsoft.com/en-us/library/hh553155(v=ws.10).aspx
You must see that both the server (source and Destination) have same version OS. Because if you want to move your CAL from server 2008 to server 2012\R2 then it can’t be possible because lower version of CAL is not supported on higher version. But reverse can
be possible.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
How do you return episodes of shows or other material to the cloud so that it is not filling up your Pad
Hey Shyster77,
If this media was purchased on iTunes, then iTunes in the Cloud gives you access to most of your past purchases. You can delete it and whenever you want access to it again re-download it:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Welcome to Apple Support Communities!
Have a great day,
Delgadoh -
Why does it say transfering data to other sites when i click on website
why does it say transfering data to other sites when i click on website, i go on a web page and along the bottom says transfering data from other websites all flash along the bottom page
I'm having the same problem with the iTunes Store...it much be down :(
-
Regarding to enable transfered option for enhanced field in BI 7.0
Hi Experts,
I am working on a requirement for which i have enhanced fields at RSA 6 extractor level and then I removed hide options from those enhanced fields and then I had replicate it at BI system but then what happen na for those fields that i have enhance transfered option at DataSource level in BI side is not enable.Even at Bi level edit button at DataSource level is disabled.So I cannot even edit it.Iam using Emulated DataSource ( 3.5 DataSource ) in BI 7.0.The DataSource is available in activate version.Can any body suggest any thing how to enable transfered option in BI 7.0 when it is disabled.
Thanks & Regards
Vinod kumarHi
Check if you have Authorization to Replicate/Change / Active for the DS, BASIS Team can help you with this.
R/3 side
Recheck for your enhanced / Appended fields at R/3 Side .
Make sure that you have saved/Activated the Code/DS/Structure.
RSA6 -- Check your DS for the enhanced Fields again / Transport the Same again.
BI Side
RSA13--Source System --Say Replicate DS -- Now see if you can access the enhanced fields here.
As you said you are using emulated DS -- Check if your Transfer/Update Rules are Active for the DS.. Try to activate the same with RS_TRANSTRU_ACTIVATE_ALL / RSDS_DATASOURCE_ACTIVATE_ALL/ RSDS_UPDR_REACTIVATE_ALL...
Hope it helps and clear -
Regarding Return purchase order
Hi all,
I am new to this area. I wanted to know the difference between purchase order and return purchase order.
If I am not wrong, the table EKKO stores details about purchase order, in which the field EBELN stores the purchase order number.
So from the table EKKO how to identify the purchase order is normal or return.Hi,
I wanted to know the difference between purchase order and return purchase order.
While you creating PO,if you mark return indicator in PO in item overview,then such type OF PO is consider as return PO,
For return PO while doing MIGO , system consider movement type 161 automatically.
In table EKKO you will get PO number pass this PO number in following table
In t-code SE16N give table EKPO and check filed-RETPO active (X Mark) there then its return PO otherwise normal PO.
Regards
Kailas Ugale -
Dear Guru's,
When ever a material is rejected in Quality inspection,we are sending thru return to vendor and we r sending it thru manual invoice.
Now my client is asking that he want system bill only..Can u pls let me know the process..
Regards,
cherukuriThanks a lot...
How to install our printer in that...when r giving print it is showing application v1 is missing in table .
In print program ,can we make changes because for correct format it needs some changes..
Rgds,
cherukuri -
Regarding:Return process of Packaging material to Vendor
Dear SAP Experts,
When we purchase consumables material it come in packaging material from vendor.
Then we send packaging material back to vendor.But this process is mannual.
Now we want this process by system.
Please help to configure this procedure in my system.
With Regards
Mukul KumarhI,
I hope you are looking for packaging instruction for vendor.
As vendor will send the materiel in packaging and after delivering the material will take back the packaging material. if this is yes. Then it can be deal with Handling unit the benefit you would have of this is, harmonized way of packaging the material. And even you can create packaging instruction to vendor with weight and seize of the product .
Configuration as below for handling unit.
Go to SPRO> Logistics - General>Handling Unit Management--step1)>Define Packaging Material Types
Step 2) Define Material Group for Packaging Materials-
Step 3) Define Allowed Packaging Materials- By assigning packaging material types to the material groups for packaging materials, you define which packaging materials are allowed for packing.
Step 4) Use Handling Unit Supplements
SPRO> Logistics - General>Handling Unit Management>External Identification>Set Unique Number Assignment for HU Identification--It is only possible to indicate a storage location as HU-managed if you have set this indicator. The use of non-assigned handling units without unique number assignment is not supported
Step 2) Number Range Maintenance for HU Identification--You can maintain number ranges for number assignment for handling unit identification via number range intervals which is consists of 9 digits without overlapping
step 3) SSCC Generation Acc to EAN128
3 a) Maintain Number Range Object for SSCC-- Number range object "LE_SSCC" is provided with interval "01" and a 9-digit number length. Create the number range objects and intervals necessary for your organization and country dependent.
3 b) Maintain SSCC Generation for Each Plant / Storage Location-
4) SPRO> Logistics - General>Handling Unit Management>Automatic Packing> Packing Instructions Master Data-->Define Number Ranges for
Packing Instructions.
All your setting is in place
Then go to POP1 to create packaging instruction.
And maintain determination record using POF1 with key combination as vendor /Plant/ material, for condition type RCPT For incoming material & SHIP-Ship to party material.
Or even you can send back the returnable packaging material by using 501M > MIGO>Other Movt type--> 501M.
Hope this clear.
Rgs -
Regarding return code 8 while importing trnsport request
hello friends,
i have encountered a problem while importing a transport request.
in log display the message is like this
ended with return code 8.
there is a syntax error in line no 5 of saplz_xxx_xxx program.
include program lz_xx_xx not found.
actually it is a function group, there is an include program at line no. 5.
how to solve this problem.
will it throw any error if the fg is stored in $tmp.
the function group concerned is stored in a customized package.
i hope to get a perfect answer.
thank you.
regards,
karteek.kattaKarteek,
Your include program at line 5 is missing in the target system and hence the error.
Just check the package of that include program and if it is not $tmp, check that this program is locked in which request ?
Transport that request to your target system and thereafter re-import your original transport and it will be success.
BR
Diwakar -
Regarding Return delivery to vendor
Dear Guru's,
While doing return delivery to vendor, i am facing an error
"Deficit of PU IR quantity 5.000 L"
Message no. M7021
Pls help me out..
Regards,
cherukuriHi Cherukuri,
Vendor Returns after MIGO & MIRO will be handled like this.
Create a Return Purchase Order with standard doc type NB and check the box Return Items in Po Detail tab.
Now Make a Goods Return receipt for the return po. Here 161 Mov type will be automatically takes place.
Now create a Credit memo for the Vendor using MIRO.
Please check the stock is there.
Reg,
Ashok
Rewards if helpful. -
Hi spgurus,
suppose i received 100 pc (migo) of exciseable item and i did MIRO (100 pc) and the management found that 20 pc as damage part, so at MIGO , i selected return delievy with capture and post of Excsie Invoice but whenever i do check the error is populating " Deficit of PU IR quantity 2.000 NOS" as error Message, but when i check spro setting (OMCQ) then that "message is catagory of warnning" but in migo is is in error status.
so suugest me what is the other method / way to make the message at the time of MIGO as warning.
thanking you
from praveerHai,
Create the credit memo against the PO in MIRO for the return delivery qty and value.and send the goods return by 122 mvt type.in MIGO.
Reg excise duty, u need to create the excise JV in J1IH.
Regards,
BSK -
Regarding Returning Parameter and Static method
Hi frnds,
I am learning oops ABAP. I want to use returning parameters in method and also STATIC METHOD.
If any example it will be more helpful
regards,
satyaHi satya,
Check this out ,Its helpful.
To get some values from a method , one can use the exporting, changing or returning parameters.If one uses RETURNING parameters, the following restrictions apply:-(1) No EXPORTING/CHANGING parameters can be used for the method.(2) Only one RETURNING parameter can be used.(3) RETURNING parameters are only passed by value.This program demonstrates the use of RETURNING parameters and the various ways to call a method with RETURNING parameter to get the value into some variable.
Sample Program
</code>
report ysubdel1 message-id 00.
data : w_num type i.
class c1 definition .
public section.
methods : m1 importing input1 type i
input2 type i
returning value(result) type i .
endclass.
class c1 implementation.
method : m1.
result = input1 * 2 + input2.
endmethod.
endclass.
start-of-selection.
data : obj1 type ref to c1 .
create object obj1.
Syntax 1
call method obj1->m1 EXPORTING input1 = 5 input2 = 4
RECEIVING result = w_num.
write:/5 w_num .
Syntax 2
w_num = obj1->m1( input1 = 10 input2 = 20 ).
write:/5 w_num .
Syntax 3
move obj1->m1( input1 = 2 input2 = 3 ) to w_num .
write:/5 w_num .
</code>
Static method example
<code>
REPORT zstatic. .
data : num type i.
class testclass definition.
public section.
class-methods : testmethod.
endclass.
class testclass implementation.
method : testmethod.
num = 5.
write:/5 num.
endmethod.
endclass.
start-of-selection.
call method testclass=>testmethod.
</code>
Reward Points if u find helpful.
Thnks & Regards,
Rajesh
Maybe you are looking for
-
Invoice details are not updating in XKOMFK table in vf02
Hello Experts, I am facing an issue in vf02, invoice details in table XKOMFK are not getting updated becuase of which my user exit is not fuctioning correctly. Please advice how the table XKOMFK will be updated in vf02. Thank You, Nusrat Jahan
-
Visual Studio 2012 Toolbox - Choose Items Dialog will not display
Hi When i click on a new or exisiting tab in the toolbox and select 'choose items' the dialog box does not display this is either from the main menu or context menu. I've reset the toolbox, deleted the .tbd files, run devenv in safemode, reset settin
-
SAP workflow creation / modifying
I am looking for information on the SAP approach to defining and maintaining workflow processes. specifically: - 1- Product approach to create new workflow 2. Modifying the existing workflow. 3. Modelling tools for workflow 4. Product approach in ex
-
Path Pronlem with jsp:plugin 's codebase
I am unable to call my JApplet Class with <jsp:plugin> tag in my JSP Page. I have tried almost every combination for codebase (absolute and relative paths ) but still there is an Error ClassNotFound . Please tell me the right way to call the Applet i
-
Where is the CLASSIC ROUTER SETUP SOFTWARE?
I'm using EA4500 in an no Internet connecting wireless network. So the classic firmware and classic router setup software are the best for me. But, Where are the download links for the both two gone in EA4500 support page? the GREAT Google tell me he