Regarding reverting from my Request

Hi All,
I had saved a RFC under my Transport Request, but now I want revert it back.
I want to have that RFC with the Previous Transport Request.
Please help me out soon.
Warm Regards,
Rohith.

Hi,
You can achive this from Version Management.
Utitlites->Version->Version management.
Select the Request and press the Retrive button..the RFC will be reverted back to the code to the selected request.
Before that take the copy of your code.

Similar Messages

Re: Transferring records from one request to another.

Hi Guys,
Currently the pseudo delta is loaded with posting date selection as two months(say, may and june- 2 lakh records).
Every two months once we do full update (3 million records).
every day we delete the delta request and load data, the full load request will be available.
for some reason, i want to move few data available in the delta request to full update request. bcoz i have done changes in the routine level, which adds up new record to dso. I want to move these added records to full update request. Bcoz the delta request is deleted daily and loaded. I dont wnat my changes to be executed daily. Bcoz the changes i done in routine level takes more time to complete the dtp.
Is it possible to move selected records from one request to another? If yes, i will move the record to full update and revert the routine change. so that my data load will be faster.
Regards,
Anand

Close

FNDLOAD: How to remove a concurrent program from a request group

Hi,
I want to remove a concurrent program from a request group using FNDLOAD utility. Since impacted environment is Production (controlled environment) I do not want to remove concurrent program manually from the request group. Is there a way to use FNDLOAD utility for this purpose or some other means?
Environment: Oracle EBS R12.1.1
OS: Linux
Thanks,
Nitin

Hi,
Unfortunately this CP cannot be disabled as it has to be removed from certain RGs but not all. Also removing it through RG forms is always an option but production gatekeepers won't allow to do that. I would have done that in a min.
If FNDLOAD is not an option then I guess only other option is pl/sql script.
Best regards,
Nitin

How to create a Demand in RPA from Service Request?

Hi All,
Could you please explain me how to create Demands to be shown in RPA when Service Request's status is set to Released.
I have done the below mentioned configurations so far.
Marked the "Resource Planning Relevance" in zitem category (copy of SRQI), created a Status profile with Released status with System status "RELE" and assigned this profile to ztransaction type (copy of SRVR).
Generally, Service Orders are referred as Demands and the released service orders are shown in RPA to assign to the most suitable and available service engineer. But our requirement is to create demands from Service Requests instead of Service Orders.
Please explain me how to proceed for this scenario. What are the settings do I have to perform in CRM system?
Kindly help me with your inputs.
Regards,
Maddy

Hi Anais Jaussaud,
Thank you very much for your reply.
My issue now is, after setting the status to Released in Service Request and saved, I checked for the demands in Resource Planning but the released Service Request is not displayed in Demands.
I had performed the settings mentioned above in my first post.
Please help me with what is missing..
Regards,
Maddy

Concurrent request got deleted from a request group

Hi,
Somehow a concurrent request got deleted from a request group. Is there any way so that we can determine the person from whose login it happened.
Thanks in advance

Hi,
You can try using PSA if that request it's still there.
Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
Hope this helps.
Regards,
Diego

Getting error in project creation from Appropriation Request

Hi SAPians,
When I am creating a project from appropriation request having same coding mask option(Option 1 in AR type), the project structure is not created as desired. Like I am copying a project from template I-00001 with WBS I-00001 at first level. But when I am creating project in AR by copying this std. project , created project definition is I-00001 and level 1 WBS is I-00001-01. Because of this project entire project structure has changed.
can anybody help me this new created project structure as desired.
Thanks & Regards
Ramsha

Hi,
we also faces the same issue since replace optionis not there on IMA11, what we did was, we created only 1 st level wbs through IMA11 and then inluded the rest using CJ20N using template.
Regards,
SL

Restricting users from Creating Request in OBIEE

Hi,
I want to restrict users fron creating request, in the Manage Priviledge section i was not able to find the where i could restrict the user from *"Creating Request"*, so is it possible to restrict users fron creating request if yes from where.
Regards,
Amit

look for "Access to Answers" under Access in Manage Privileges. That is where you restrict access to creating requests.
- Mahesh

Function module which can print from spool request ?

Hi ,
Is there any function module which can print from spool request ?
Regards
pabi

I think NO.
You have to take print from SP01.
Amit.

Unlock objects from transport requests

Hi Gurus
I was doing the SAP_Basis support pack upgrade, in netweaver 7.1 and many of the objects seems to be locked in transport requests. as my understanding, i have two options only,
1. replease transport - but it can create issues to us, as that will automatically imported to the next system in teh landscape, so unwanted requests will move to QAs system
2. unlock objects from transport request.
So i did the second option, but it had a message that it can create inconsistencies in the system, do u know what all the meassures we need to take, if we unlock objects from the transport requests. Is it required to delete the transport requests,
by mistake , if someone releases the that transport, whether it will release the old object or the new object.
Please suggest what would be the best recomended approch by SAP
Bijoy Babu

Hi Bijoy,
Its better to release the TR and then delete the same from the queue before it is imported into the following system. This will avoid any inconsistancy when the TR released after the SP application.
Regards,
Varadhu

Create/split transport request from existing request

Hi
I want to know how to create/split transport request from existing transport request in ECC 6.0
Regards
Kumar

hai kumar,
split the request means ?
u can assign objects of one request to another and merge two requests
but u cant split one requet in to , u can assign task from one request to another
u have lot fo options just search in menu and u get them
regards
m.a

Release object from transport request

HI
I want to take off two objects from my transport request.
How is it possible without releasing all the exisiting objects from the request.
Regards,
Tapish

Hi Tapish,
You can go in any of the following ways
1)Goto SE01 and give your transport request number.
   goto your task and click on edit button. you will get the list of all objects in a table.
   click on the object that needs to be deleted and click on the delete button.
2)Goto se03 and give your request number to unlock all the objects.
    click on the objects that need to be deleted and click on delete button on top.
    dont forget to lock the objects after deleting the required
The second option will work in your case i guess.
Hope this helps..
Cheers,
Srinath.

How to get a parameter from each request in a session scope BackingBean

While calling my JSF page, I pass an id as parameter in the URL, and in the Backing bean I retrieve it from the request.
On each request I need to get the id and populate the page accordingly.
But I am forced to create my Backing Bean in session scope b'cos otherwise ValueChangeListener method does not work properly.
So where and how do I get the id on each request?
Pls. help

What you can do is create it in the request scope like this:
<managed-bean>
      <managed-bean-name>personBean</managed-bean-name>
      <managed-bean-class>
        com.PersonBean
      </managed-bean-class>
      <managed-bean-scope>request</managed-bean-scope>
       <managed-property>
             <property-name>id</property-name>
             <property-class>java.lang.Long</property-class>
          <value>#{param.id}</value>
      </managed-property>
</managed-bean>And then in the page use a hidden field to set the id in case of a postback (validation error):
<h:inputHidden id="id" value="#{personBean.id}"/>Does that help you?
Thomas

How do I revert from Mavericks to Mt. Lion?

I have tried the suggestions contained in similar threads without success. My configuration may be causing problems. Here is my configuration and the pathway I would like to use:
As shown below, I have a MacPro early 2008 running OSX 10.9. I have an iPhone 4S running iOS 7.0.3. I back up Time Machine to an external hard drive and also to a separate internal hard drive that occupies one of the bays on my Mac Pro, but it is NOT the same hard drive on which Mavericks resides.
Before migrating from Mountain Lion 10.8.5 to Mavericks, I did a final backup of Time Machine to each of the two drives mentioned above. I then proceeded to install Mavericks 10.9. For me, this was a mistake. I normally wait until at least three updates have occurred before moving up to the next OS X offering. The many flaws I have encountered in the way Mavericks currently operates have funally exhausted my patience and I must revert to 10.8.5.
I would like to make the change using Time Machine for both the Mountain Lion operating system and all of the applications and documents. If I were going to reinstall Snow Leopard 10.6.8, I would start by reinstalling the OS using the DVD which I have and then I would restore the apps and documents from Time Machine. However, neither Mavericks nor Mountain Lion have DVDs. I believe that they both can be installed by Time Machine, but this is where I run aground. I don't know how to make it happen. I have tried and have been hindered by popup windows telling me I can't change the Applications. I can't go on from there. I would prefer to dowload from the hard drive version of Time Machine rather than the external drive for the simple reason that the internal hard drive is faster. If that is not advisable, I am certainly willing to go with the external drive. It is my understanding that I can restore Mountain Lion directly from Time Machine along with all of the documents and other stored items such as Applications, Library, etc.
I have tried to do this, but can't seem to get the hang of it. I need a tutor who knows how to do the job using this path. Assistance will be greatly appreciated.

A SIMPLE METHOD FOR REVERTING FROM MAVERICKS BACK TO AN EARLIER OS X VERSION
There were so many caveats and side issues included on various instructions that didn't apply to me that I thought it was a bit confusing. However, I got the idea that restarting while pressing down the option key would give me access to the Recovery drive. I tried it and it gave me several choices. The top one was irresistible. It says "Restore From Time Machine Backup." I had done full backups using Time Machine to both an internal hard drive on my MacPro and an external hard drive just before installing Mavericks. I clicked on "Restore From Time Machine Backup" and selected the external drive since I wasn't sure that the internal drive would work. The internal backup drive is faster, but I felt the external drive was a safer bet. A window came up asking me to choose which backup I wanted to use. I picked the one I made just before installing Mavericks and it went to work. It took a couple of hours to finish, but as it restarted and Mountain Lion 10.8.5 appeared on the screen, I was totally relieved. I feel liberated. Everything works. No wacky glitches to say "gotcha!"
When you consider all of the written instructions, many of which are very difficult to follow, this very simple method of restoration is amazingly easy. I hope it helps others who are considering moving to OS X 10.9. Just get a good external Time Machine backup of your present system before you venture.

How to delete User-Agent header field from http request ?

Hi,
I'm currently using HttpUrlConnection to create a HTTP 1.1 POST client, and I wish to remove the User-Agent field from my request.
However, java seems to set this field to "java.1.4.2" if none is provided.
I have found methods to modify the User-Agent ( "setRequestProperty()" and system property "http.agent" ) but none to delete it.
Is there a way to remove this header from the request ?
This field is said as "should be implemented" but is not required in rfc2616(http1.1), so I'm a bit surprised that I can't remove it in the java HttpUrlConnection...
Thank you for your help,
Gregoire

You can always go around java.net.HttpUrlConnection with your own subclass of UrlConnection or simply a socket. You may lose some functionality, for example with handling binary content, but it may still be a solution.
(But are you saying that the server requires that there's no user-agent header? That's not a case of incompatibility, it's a bug. Scrap the server, and get one that works.
It seems a lot more likely that the server just have strict ideas of what user agents it wants to talk to. Then instead of removing the header, you want to find out what values the server will expect.)

Please help I forgot confidential answers questions to my account The problem I shipped itunes card and when I buy from my request answers"

Please help I forgot confidential answers questions to my account The problem I shipped itunes card and when I buy from my request answers"

Call AppleCare for your country and request help resetting the questions.

Regarding reverting from my Request

Similar Messages

Maybe you are looking for