RegardinG RG1 register
Dear All
Dear All
My client requirement is like they have two plant with same excise registration number & want single RG1 register for both the plant.
Is this scenario possible in SAP & what are the steps?
Hi
This is not possible in Non SAP even, check with them how they are managing stock in two different plant on same time.This is legal requirement you can have different process for different client. Across the same it should be same as per Legal requirement.
SAP will help you the same business which is there as per Legal in Non SAP.
Rgs
Similar Messages
-
Incorrect Opening stock & closing stock updation in RG1 Register
Hi ,
It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
After extracting for the month of sept. , when no opening and closing stock
reflecting in it, than we realize it .Afterwards we maintain
the closing balance for 31.08.2010 in the table and try to
re-extract it,but there is no change in the sept.figure.After extracing for
October month,we get the values in the column ofopening stock and
closing stock in RG1 register. But for some material it is showing
negative stock and for some as Zero, though physically it is present.
What i found in Rgsum table that the stock quantity are not correct,
it seems that september stocks are not updated in the table also in
J_2irg1bal table ,only october stock are reflecting.
looking forward for your valuable inputs.Hi,
All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
Excise details table all the entry are there for september month.The only problem is on Opening and Closing
balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
How to correct this.
Regards
sujeet -
SECess is not getting updated in RG1 register
Dear All,
I have applied the Note 1034308 ( Budget 2007 - 08 changes for J1I5 ) but the sec cess entries are not getting populated in the RG1 register.
which are the settings are required to be completed.
kindly guide.
DeepakCheck out some corrections are missing or check with abaper that he added the field in the program and u need to to check the settings in the excise group of that plants
Reward points helpful
Regards
Sriram -
Opening and Closing balances in RG1 register
Hi,
We are facing one issue in RG1 register. When we update and extract the RG1 register from system, its showing Sales Qty and Excise duties properly. But opening and closing balances are not coming, its showing zero there. I checked J_2IRG1BAL table and found that it is also not getting updated. Material comes into stock with 561(initial stock) and 101(from production) movement types but opening/closing balances not coming in either case. Both movement types are activated for RG1 also.
Seeking your help in this regard.....
Regards,
Satyendra SoniHi Satyendra ,
For initial upload in RG1 there are 2 tables you need to manually update. J_2IRG1BAL from CIN or SD side. And Accounts to be updated for Balance in J_2IACCBAL.
There are 2 ways for updating balance tables
On last day of month enter Balance in Closing balance field.
OR enter opening balance on 1 st day of month.
Also check Material form P ,can be maintained in user exit for permanent effect.
After updating balances ,
perform any one transaction on system.
and then Extract the Rg1 table .
Ask FI consultant to put in FI JV after balance upload in ACCBAL table.
If you have not done table entries before performing transaction and extraction of RG1 then balances will not appear .
Check with your senior there and use table edit in such case (I hope you are not on production server at the moment) .Then again perform Extraction and check once.
SD FI and ABAP to be present and take decision accordingly. -
RG1 register opening balance and closing balance updation
Hi All,
We are using the RG1 register recently i.e. after the Functional Upgrade (ECC 6.0). While executing J2I6 RG1 Excel report, opening balance and closing balance is not appearing in the report even though we have done the J1I5 extraction.
Is it mandatory to update the J_2IRG1BAL table with zero stock as and when the new material codes are created.
Regards,
PraveenHI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth -
RG1 Register Opening and Closing balance
Dear Expert,
As per Snote 951955 for Initial RG1 register update whether we have to give the opening Quantity in the table J_2IRG1BAL along with material form.
Can we re extract after updating this values in table J_2IRG1BAL will the value come .
Also after extracting the RG1 register there are no excise values for Receipts line items.
The tax rate filed is also blank do we have to do any other special configuration for this values to some.
Your expert advise will be highly appreciated.
Edited by: lolu jo on Aug 17, 2011 7:32 AMHI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth -
Negative Entries and Closing Balance of RG1 Register
Hi,
We are updating our RG1 register with copy of movement type 311 & 312. We are using copy of movement type 311 for incoming entries in RG1 Register and copy of movement type 312 for the reversal.
But in the table J_1IRG1, we can see only positive entries (of quantity) for both cases (incoming as well as reversal). There are no negative entries (of quantity) in the reversal.
Can anyone provide some idea how we can see the negative entries for reversal and closing balance of RG1 to ascertain that our RG1 register is update?
Thanks in advanceHi
U have specify the 311 here Lg> Tax on goods movement > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices
Regards
AKM -
Different material description for RG1 register
Dear Experts,
I have a client requirement for change in material description (materialmaster) to a different description.
The description maintained in material master is for viz
SS CT BT 200mm-123-093MKO
But excise need description
SS BILLET
Where to maintain this additional description in material master and fetch the same for RG1 register.
Let me know any stranded user exit is available. If the above case is possible than also let me know what would be the bad implications on processes (like stock will not match with description).
Regards,
RB
Edited by: RB on Feb 26, 2009 6:18 PMyou either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download -
Excise duties values not appearing in the RG1 register
Dear All
After updation of RG1 register and extraction of the same on checking the entries in the table J_1IRG1 we are not getting the BED ,Ecess and SECS.In printing of this register the same values are not appearing.
Further this register is around 524 pages.It is showing per transection.How can we redure no of pages.
Please guide in this matter.
deeptihi,
once again check
1.Tcode: J1id
2.Tcode:J1iex
here see part1 created or not check it.
3. Tcode:J1i5 update register
4. Check condi.types for SH
is not fine pls revert back
regards
ka -
631 movement type Duplicate Entry in RG1 Register against IDH & ROP classif
Dear Friends,
After after RG1 Registerupdate in J1I5. I v check the J_1iRG1 table and found that
same material Document against 631 movement type reappear under IDH(Issue) and ROP (Recipt) classification.
Advise me
1. Where is my mistake
2. What should to do rectify this double entry.
Regards
ArunHi
You should enter the movement types and storage locations at the time of extraction and updation so that the only relevant entries will come.
Any way checkc this note
Note 189687 - Duplicate entries generated in RG1 register update
regards
Prashanth -
Error in excise duty values in RG1 register
Dear All,
While extracting the RG1 registers it has been found that values for Basic excise duties, Education cess and SH edu. cess are not appearing properly.
I have verified the following
1. There were 3 deliveries against which 3 separate invoices have been created. Against these 3 invoices, 3 excise invoices have been created. All the inoices are posted to accounting.
2. Sales material as well as sold to and ship to parties are same in all the three invoices.
3. Dispatch location i.e. plant is same for all 3 invoices.
4. In J_1IEXCDTL table EXBAS as well as EXBED, ECS and EXADDTAX1values are appearing properly for all the 3 line items.
But no values are coming for 2 line tiems; whereas correct values are coming in 1 line item in the Excel download as well script for RG1 register.
Please help ASAP.
Thanks & Regards
PiyushDear Lakshmipathi,
All the 3 invoices are psoted to accounts. All the 3 excises invoices are also posted to accounts. Duty values are flowing properly.
The problem is in the RG1 register extraction.
BED, ECS and HCS values are displayed for line 1 but it is blank for remaining 2 line items.
Thanks & Regards
Piyush -
Dear All,
When I execute the transaction J1I5 and J1I6 for the RG1 Register none of my sales related coloumns like removal from factory both Qty and Value, BED,ECS,SECS,and AED are getting updated,please advice what needs to be done.
Regards
Atul KeshavHello Atul,
Please check the table J_1IEXCDTL (item details table) check whether the quantity and EXBAS field is updated with values.
Also please check whether duty values are updated!
Best Regards
MBS -
Manufactured Item is not hitting the RG1 register
Hi,
In india localization, Manufactured Items to hit RG1 register..
But in our case it is not happening ( All localization setups are defined for the warehouse in Discrete inventory)
Can anyone help me in this regard..
Regards,
Navanethanhi
To my knowledge in the current release Production batch is supported only for OSP transaction and Only 'MOVE IMMEDIATE', 'ADJUST IMMEDIATE' and 'CREATE IMMEDIATE' transactions are supported for RG updates.
As per excise laws it needs to have all the finished goods produced into RG1 therefore when we book production quantity for finished goods system should update RG1 also.
In the current system when booking production quantity ,RG1 register not getting updated and system should call the same trigger which is being used for move immediate,adjust immediate etc.
U need to raise an SR
Thanks
Raj -
Movement type for updating RG1 register.
Hi Gurus!
i want to transfer material from "Returned Blocked stock" to "Unrestricted stock"(Storage location X to Storage location Y)
Storage location X :-For Returned from customer Blocked Stock
to Storage location Y:- For Unrestricted Stock
what is the movement type which will update RG1 register? while transferring stock from storage location to storage location.
Regards,
Amol
Edited by: Amol Tamhane on Feb 26, 2009 2:45 PMHi,
Go to logestic general-tax on goods movement-India- Buisiness transaction - specify which movement type involves excise invoice. Here for 311 or 313/315 movement type select update RG1 register.
Hope this will help you
Regards
Mahesh -
Material form Packed, Loose is maintained for RG1 Register----where?
Pls Suggest me to solve the problem. I want to know where the material form is maintained. P for packed, L for Loose. In RG1 register for Packed material everything is getting reflected in RG1 Register. Whereas for loose material opening balance, Total of opening and manufacture & Closing balance are not getting reflacted in Rg1 register.
I have checked till the date all production & issue are there in J_1IRG1 table after J1I5. After extracting the thru J2I5 only packed material is getting updated in J_2IRG1BAL table. But not the loose or unspecified material. However my clients need to get packed as well as loose material in RG1 register.
Manually in development client i changed the Losse or unspecified material as Packed by direct table entry in J_1IRG1 for testing. After doing the same when i extract the data thru J2I5, everything is coming in J_2IRG1BAL table. And getting reflected in RG1 register.
Now I have to change the Loose material as Packed material. So my problem will be solved. That is my objective.
Pls tell me how to do the change. Is any config setting or assignment?
Its urgent.
NB: helpfull answer will be awarded.
Regards
Srimanta
Edited by: Srimanta De on Jun 25, 2008 11:46 AMSrimanta,
for better and quick reply post this thread in MM section.
Amit.
Maybe you are looking for
-
Hi, I decided I'd still all the fonts from my old G4 Powermac onto my Macbook Pro and put them onto a memory dongle and started click and dragging the folders into Font Book (well over a thousand), during which it named quite a few files as corrupt a
-
Synch/Asynch Bridge TimeOut
Hi, I am sending data to R/3 system through XI and waiting for response. If the R/3 takes half an hour to respond will my Synch/Asynch bridge will be still waiting for the response or will it die because of TIME_OUT. Can anyone let me know. Regards,
-
EoS (end of support) AsyncOS 7.5.2-014 of ESA
Hi All, I would like to know about end of support for AsyncOS 7.5.2-014 of ESA and I want official document end of support announcement from cisco. Please give link or document if some who have it. Thanks,
-
Altering the linkage between Keywords and sub keywords
I have a master folder that contains a series of folders with several thousand images, all with keywords. Things seem to work when I try a FIND, etc. However my old keyword structure needs to be fine tuned. I created a new structure and some of the o
-
Has anyone figured out how to get contact photos on Ipod? FOR WINDOWS, Not MAC. This is my last task. Everything else is working properly.