Regarding running Documaker on Windows 2012 (64-bit OS)

Hi,
I am looking for some clarification on running Documaker 11.5 on Windows 2012. Will there be any compatibility issues with running Documaker 11.5 on Windows 2012 server that anyone think of?
Thanks,
Niranjan.

I don't think there are any know issues. Do you have a problem? What exactly are you trying to run on this server?
Normally all installation issues on newer windows servers are related to tighter security, so you might have to run installer as administrator or open ports on firewall, or something similar. Also default IP ports used by some of the Documaker parts might be already in use by Windows, in such case you will need to modify DM configuration to pick an available port.

Similar Messages

PCO on Windows 2012 64-bit server

Hi All,
We have MII hosted on windows 2012 64-bit server. We are planning to install latest GA version of PCo which happens to be 2.3. From the product availability matrix it seems that PCo 2.3 is not listed in the OS for it.
I know that PCo 15 which is in ramp is compatible with windows 2012 64-bit server.
Has anyone installed PCo 2.3 on windows 2012 64-bit server or is anyone aware when PCo 2.3 will be available for windows 2012 64-bit server.
Regards,
Darshan Sheth

Hi All,
Got confirmation from SAP through OSS message that PCO 2.3 SP04 can be hosted on Windows Server 2012.
Regards,
Darshan Sheth

Can Crystal Server 2011 run on a Windows 2012, R2 server?

Hey,
I purchased Crystal Server 2011 in April 2013. Unfortunately, due to a heavy workload I'm just now ready to install it in a test environment. Will Crystal Server 2011 run on a Windows 2012, R2 server?

If you update your CR Server to SP 5, then yest, it is supported on WIN 2012.
See the PAM.
To get SP5 you will have to loin to the SAP Market Service Place.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]

Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself.

Are there any issues regarding running Labview on Windows Vista

I am a cognitive psychology graduate student, and I am considering switching to LabView to display stimuli and gather RT data. I have previously used E-Prime for this task, but E-Prime doesn't seem to run well with Windows Vista. Are there any known issues regarding running LabView with Windows Vista?
Thanks
Chris

I've had no problems on Vista*. Only issue I've had was concerning how Vista uses fonts, but if you start on Vista and don't switch between XP and Vista, etc., then you'll be OK.
*no problems with LabVIEW's compatibility with Vista. Now, Vista in general, that's another story and not for this thread/forum.
Richard

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

When I open Firefox, even in safe mode, it causes my Windows 7 64-bit to totally crash and I get that blue screen of death =(. This has happened suddenly on Nov 16, 2010. I had been running Firefox on Windows 7 64-bit with no problems previously. Help?

I have had Windows 7 64 bit for the past year and have run Firefox with no problem. It was the most problem free of the three browsers including IE and Chrome.
I have a Vista side where I run my online backup and did so yesterday. Went on Firefox. No Problem.
Today I booted into the Windows 7 side. Seemed to boot up okay. Until I opened Firefox. Suddenly, my whole computer crashed, windows shut down and that bluescreen popped up. I restarted normally. Same thing. I restarted in safe-mode. Couldn't find any problems. Went back to regular mode. Started FF. Boom crash.
Back to safe mode. Did a system restore. Back to regular startup. Didn't help. Attempting to open FF crahed windows.
So back to safe mode. Started Firefox. Crashed the whole computer and same blues screen.
So I uninstalled FF. Reinstalled FF. It still makes Windows crash.
So now I am on IE :P

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit

I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit

Hi momi macrom,
Have moved your post to the Flash forum. Experts here are better placed to help you.
Thanks,
Preran

ITunes10.5.2 and MS Office Home and Business 2010 (running on MS Windows 7 32-bit SP1): can you help me please?

I've a PC running W7 32-bit SP1 and Office Home and Business 2010. The issue is that iTunes last version (10.5.2) doesn't work with Outlook 2010 and vice versa. With iTunes installed Outlook 2010 doesn't open itself.
No error message, but the program doesn't open.
I tried the restore, but nothing even so.
Either-or: or iTunes or Outlook. It's not possible. This is a seriou bug
I've really tried all suggestions found in this bolg, but in vain.
Can someone from Apple help me to fix this bug please?

Hi guys, thanks for your responses.
What is this vboxnetflt for? Which modules are the essential modules for virtualbox? What I mean is: do those nice features like mouse point integration, full screen supportment etc... rely on vboxnetflt and vboxnetadp?
What I have in my configuration file is:
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(vboxdrv vboxnetflt vboxnetadp)
I think vboxnetadp is used for networkiing. and vboxnetflt sounds like network filtering stuff. Can someone please confirm me? I think the problem was the sequence of upgrading. Firstly it updated the kernel and then installed the new version of virtualbox. I think if it could install the new version of virtualbox first and then the kernel, it would go without any problem, just my opinion as I said.
Let's keep tracked on this. Maybe someone will find a solution before virtualbox developers :-)

What is the best way to get iTunes running on my Windows 7 64 bit system without installing it on my Windows 7 64 bit system?

I had iTunes installed on XP before upgrading my system and with all the install and uninstall issues I don't want to go through the same thing with Windows 7.
So, I'm looking for a way to get iTunes running on my system without installing it (like maybe in a Virtual OS on VirtualBox or VMWare.)
Something that I can easily restore and/or repair (Windows 7 Restore Points/backup options are not viable because they restore EVERYTHING to the state they were in when they were created.)
TYIA
Any suggestions will help as to the best way of doing this.

LOL Yeah, right, that's very funny...
I did that on XP so I know better now!
Here is just 1 example of many:
On XP the uninstall wouldn't work so I coudn't upgrade iTunes. In order to fix this without Re-Installing XP, I had to delete iTunes and then manually remove it from the registry and from Add/Remove programs before I could Install the new version. Eventualy it did work after 1 and a half days of repairs...
I'm not going through the same type of problems on Windows 7 that just simply waste my time!

How do I get a file written in AR 3.01 (32 bit) to run on a windows 7 (64 bit ) OS system

I have an index file that is written for AR32E3.01 and so I can't load it on my windows 7 64bit system. all of the adobe file are view able but without the index the files are useless.

[discussion moved to Creating, Editing & Exporting PDFs forum.]

Hi my web hosting company irunsolutions.co.uk have informed me that my website does not display properly in firefox when run on a windows 7 32 bit platform.

website is www.empireembroidery.co.uk
does not display properly when viewed on 32bit windows 7 platform in firefox.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Unable to install Client Tools for Sybase ASE 15.7 on Windows Server 2012 64-Bit

Hello Folks,
I just downloaded the client tools package from https://support.sap.com/swdc --> Installation and Upgrades --> A-Z list --> SAP ADAPTIVE SERVER ENTERPRISE --> SYBASE ASE 15.7 --> Installation --> Microsoft Windows --> 51044415.zip
I'm trying to install the client tools for a newly provisioned Windows 2012 64-Bit machine. After unzipping the folder and running autorun, the installation does not proceed. When I go to pcclient64 and run either setup.exe or setupConsole.exe, I get the error "This Application has Unexpectedly Quit, Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)". I stumbled across various posts on the forum, and it appears that the installer is not certified for Windows Server 2012. I tried using the compatibility mode for Windows 7, and it proceeds further and launches the SAP GUI; however, it closes afterwards.
Any suggestions would be greatly appreciated. Thanks in advance.

Hi,
51044415 is a PC-Client 15.7 refresh.
You are using a version that was not certified with Windows 2012. Get the most current version PC-Client 15.7 SP130 or SDK 15.7 SP130 or SP132.
If your looking for PC-Client5.7 SP130 look for EBF23439
We didn't get certified with Windows 2012 until SDK 15.7 ESD#6 even with that I reported a few minor issues.
You need the following on the machine before the installation.
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2005 Redistributable Package (x86) (or dsedit and ocscfg will not work)
Microsoft Visual C++ 2005 Redistributable Package (x64) (or dsedit and ocscfg will not work)
Thanks,
Dawn Kim

Labview 2012 Installer builder issues with Windows 7 64 bit

I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this??
Attachments:
BuildErrors.txt ‏11 KB

It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

ASM installation failure from Oracle GRID under Windows 7 64 bit

I am a rookie..I am running Oracle database 11gR2 running on a Windows 7 64 bit system.
I am implementing ASM onto my system solely for learning purposes
The implementation of ASM has changed between database releases 11gR1 and 11gR2 such that it is no longer configured locally but is now implemented from within Oracle GRID. Unfortunately, the book I am using to study my OCP from was written at the time of 11gR1 so I can no longer follow its instructions to create and configure ASM. Instead of using DBCA I now need to use ASMCA to configure ASM.
As a preliminary requirement I successfully installed Oracle Grid and configured it to run on my standalone server.
I created two partitions on my harddrive ...... drive G: and drive H: with intent of using them as my ASM disks. 45 Gig and 50 gig in size respectively formatted with the NTFS filesystem.
I ran ASMCA in an attempt to create an ASM instance
I specified these partition drives '\\.\G:' and '\\.\H:' in the disk discovery path which were successfully picked up.
However when ASMCA executed the creation process after some time it failed with the following message:
One or more diskgroup(s) creation failed as below:
DiskGroup mydisks creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], [], [], [], [], []
Check C:\app\peter\cfgtoollogs\asmca\asmca-12101712AM0558.log for details.
Which I did and found many things
Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Oradim Command : C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logEntry:113] Entering oracle.sysman.assistants.usmca.util.UsmcaUtil Method : executeCommand
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Command: C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:07.254 EST ] [UsmcaLogger.logInfo:141] Instance created.
Ok. As above the ASM instance appeared to have been successfully created so as part of my investigative process to confirm what the script actually did successfully execute I attempted to log into the ASM instance to see how far it would get. It fails with the following result
C:\Windows\system32>set ORACLE_SID=+ASM
C:\Windows\system32>sqlplus sys as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 17 10:16:36 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I checked Windows Task Manager
There is an OracleOHService and it is running
LISTENER is running ie the local listener running on port 1521 that was originally created with a previous basic stand alone installation of the Oracle 11gR2 database . (ie before I installed Oracle GRID). No other listeners are running.
Can t see any evidence of any ASM service on Windows Task manager started/stopped or otherwise. Neither can I see evidence of a CSS service.
The log file that was generated is large I am not clear on what I should be looking for in order to find clues as to how I might manually resolve this problem and possibly 'salvage' the installation. Any advice would be appreciated.

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

Regarding running Documaker on Windows 2012 (64-bit OS)

Similar Messages

Maybe you are looking for