Regarding RWB Components Under Component Monitoring

Hi Experts,
Basically My Issue is Unable to get the Adapter Engine in the Communication channel .
So When I Check up with the RWB, I Observed that We are having Some Inconsistencies.
We Installed the Adapter Engine As Non-Central Adapter engine At the Time Of Installation .
So It's Not Showing Under the Integration Server Part, It's Showing Under the Non-Central Adapter engine Part.
Is it will be the Cause for this Error in the CC ???
Please Let me Know
Regards
Khanna

You shouldn't need to do.
Sometimes restarting the whole box resets this information - as long as your SLD is set up and working okay.
Check these links:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000674007&
https://websmp105.sap-ag.de/~sapdownload/011000358700003772382006E/Post_Inst_SLD_NW04.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700003772372006E/SLD_PIG_2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700006121102006E/SLD_7_0_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700003772342006E/SLD_04_SPS20_20070502.pdf

Similar Messages

Adapter Engine link disapperead from RWB - component monitoring screen

Hi.
I restarted PI.
After that, the "adpter engine" line (link) disapperead from the page RWB - component monitoring.
PI is running, it is exchanging data with Ecc and Thirdy Party systems.
How to solve the problem ?
To arrive to "defective" screen:
http://host:5xx00/rwb/index.jsp --> component monitoring --> component with status all --> display
Under domain xx, under integration server, there is no adapter engine line/link
Thanks !

HI,
Check in SLD-> content maintenence-> XI adapter framework is registered or not...
If not thn register by performing the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
have a look on this...
PI 7.1: Problem with SLD configuration: Cannot find central Adapter Engine
Regds,
Pinangshuk.

Error in Runtime Workbench, Component Monitoring, Proxy Runtime

Hi,
I have the following error in the Runtime Workbench, under Component Monitoring->Integration Engines->Proxy Runtime. The error message is Ping Status: Unable to logon to system xxx in language EN with user XIRWBUSER. However, I am unable to find out where the account and password are specified in order to correct this. Any help would be appreciated.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

Component monitoring - adapter engine error, but no channel in error actual

Hi,
We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
Thank you,
Olian

Hi Olian,
i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM

Regarding Communication Channel Error in Component Monitoring(RWB) in Dev

Hi,
In my XI dev Server when I check Component monitoring....Adapter Engine and CC monitoring are showing errors ( showing red
symbol)......
I think my RFC to File Scenario cannot be executed due to this.......I cant receive any messages in SXMB_MONI.....
Please help me......
Thanks,
Sudheer

Hi...
Still I am not getting any messages in the MONI.....
In communication Channel Monitoring it is showing green.......
In Component Monitoring Integration Engine:XID showing red.....CCMS Status: showing red and Adapter Engine Showing red......
Created RFC destination at ECC(of 'T' type) and gave ECC details....Then gave same details in Communication channel in XI.......
I did not created RFC Destination at XI.......
Should data to be passed to RFC or XI automatically pings the data......
When ABAPer executed RFC Connection its successful...but when he executes Functional module i.e test it is showing 'SYSTEM_FAILURE'.....
Thanks,
Sudheer

Regarding the Components in the RWB

HI Experts,
In the RWB->>>Component Monitoring-->>>
Components
 Adapter Engine
 System Landscape Directory
 Integration Directory
 Integration Repository
 Runtime Workbench
When Ever I Started the RWB The Above All are in the Grey State Only
After that when I Clicked on those Components Means Its Comming in to the GREEN State .
What Could be the Reason. Please Let Me Know
Regards
Khanna

Hi Sergio Cipolla,
When I Check With the RWB Components, Here I am Unable to Find out the Communication Channels Monitoring .
I Followed this way to see the CC Monitoring
Goto RWB--Component Monitoring--Adapter Engine
Here CC Monitoring should be in between the Background Processing Tab and the Adapter Monitoring Tab.
But here it is missing . what to Now
Regards
Khanna

Adding entries in Audit Log Tab in Component Monitoring under Runtime Workb

Hello Experts,
I am trying to add my own audit log entries to the Audit Log Tab under Runtime Workbench -> Component Monitoring. I found this sap help link (http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/6fe540b1278631e10000000a1550b0/frameset.htm) I am not sure if i am going in the right direction or not. But, when I tried to use the code in my User Defined Function in Message Mapping it gives me java error on PublicAPIAccess.
Can anyone please let me know what am i doing wrong or if I am going in a totally wrong direction to achieve me goal.
I am using PI 7.1 without EP1 and my example uses File adapter.
Thanks!!

Hi,
if you are trying to add custom audit log for system monitoring in RWB in component monitoring, then i think it is not feasible........moreover for this thing, you can ask your basis guys to configure CCMS in your XI system to recieve alerts for your system.............
if you are trying to add custom audit log msgs for your msg processing, then you should develop a custom J2EE adapter module and add your audit log entries in the process method of your adapter module..............
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on May 6, 2009 7:12 AM

Error in RWB Component Monitoring ... "Domain ???"

Hello Everyone!
A problem suddenly popped up in our SLD. When I navigate to RWB > Component Monitoring... I can no longer click on the "Integration Server" The Domain shows "Domain ???" would anyone know what could be the problem?
Warm regards,
Glenn

Hi Glenn,
Please check your BS for the XI in the SLD and verify you have specified the pipeline url properly:
http://<host>:<port>/sap/xi/engine?type=entry
you can find the http port in SMICM --> GOTO-> SERVICES
In addition to that Verify (in XI) SXMB_ADM --> IE config --> IS URL.
you should have the same url here.
Hope it helps..
Kumar.S
Message was edited by:
Kumar.S
Kumar.S.V

Error in RWB - Component Monitoring - Adapter Engine

Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PI

Hi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
 SLD.selfregistration.hostName
 SLD.selfregistration.httpPort
 SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego

RWB Component Monitoring - Cache Connectivity Test failure

Hi,
I have done the Cache Connectivity test in RWB-Component monitoring.
For the Integration Server - Integration Engine XYZ.
I am getting error
Result of Self-Test
   Can the SLD be reached?   ... Details OK
   Does the Integration Engine know the business system?   ... Details   OK
   Are roles in SXMS_CONF_ITEMS and SLD consistent?   ... Details Error
   Is Web service security available?   ... Details
The error message os
Details for 'Are roles in SXMS_CONF_ITEMS and SLD consistent?'
Inconsistent roles. System Landscape: Integration Server. SXMSGLOBAL: Application System
How to solve this issue.
Regards
Farhat

Hi
Use Tcode SXMB_ADM -> integration engine ,Assign proper Client to Integration Server.
look this similar thread
Are roles in SXMS_CONF_ITEMS and SLD consistent?

RWB component monitoring WARNINGS

in component monitoring under integration server the INTEGRATION ENGINE i was diaplayed with some yellow LED saying that some waring..
for this INTEGRATION ENGINE when i checked for status again SELF_TEST STATUS in yellow LED. and the result of SELF TEST showing IS WEB SERVICE SECURITY AVAILABLE? IN YELLOW LED.
WHEN I went for details for IS WEB SERVICE SECURITY AVAILABLE? i was displayed with communication error proxy calls are not permitted on sender or reciever side on IS(client)
what is this error .. how to overcome this..
INTEGRATION ENGINE should be dispalyed in GREEN LED..
plzz help me in this regard..

Hi,
Try the below latest config guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa/soa-management/exchange-infrastructure/xi-design_configuration/configuration%20guide%20-%20sap%20exchange%20infrastructure%203.0.pdf .
check 12.4 in the document .
but i've observed though you have warning it works fine.
Satish

How to integrate CCMS with RWB component monitoring

Hi, all.
I am wondering if there is a way to forward errors from the component monitoring and CC monitoring in RWB to CCMS. For example, if a CC is down because somebody changed the CC user or password or disable the CC totally, RWB will show errors in the communication channel monitoring. However, I could not find a way to forward those messages to CCMS so that we can manage it in a centralized way. Any idea?
Thanks,
Jonathan.
Edited by: Jonathan Ma on Nov 4, 2011 9:50 PM

HI, look this...
CCMS Heartbeat... RWB
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II
But First, you'll need all of this..
how to coonfigure CCMS Alerts and Alert Categories and Alert Rules
Regards!

RWB - Component Monitoring - Integration Engines = none ???

Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100       (XI Server)
Technical System: DEV on dev60           (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.

Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role:   Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish

HTTPS: Error RWB components monitoring

Hi
After implementing HTTPS, when trying display component monitoring in RWB, the follwoing error displayed.
Error during communication with System Landscape Directory: Unable to open SSL connection to host "myhost.mydomain.com:50101". Server certificate rejected by ChainVerifier.
What shall I do? RWB was perfectly ok with HTTP.
Any help is very much appreciated.
Thank you
//Jack

Hi,
There is a thread which had similar discussion-
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/3344d3360ab24ab70d7155e356c988/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/90220b1c034eb6af10e123ca419f58/content.htm
Hope this helps,
Regards,
Moorthy

CC problem in RWB Component monitoring

Hi people
i am getting this error in RWB component monitoring
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
But sender&receiver CC are STATE is ACTIVE status
Adapter Engine Server is RED mark
All object's r correct
PLS send me to ASAP
Thanks & Regards
shekar

Hi There,
It saying that one of you CC in error and remaing things are ok.
As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
the error may be occured some time back but it is still showing erro ..but everything works fine...
Regards
Rao

Regarding RWB Components Under Component Monitoring

Similar Messages

Maybe you are looking for