Regarding SAP integration modules

Hi all,
My client is interested to implement SAP for shipping project. The system should be able to cater jetty, container terminals, Finance, HR, Logistics, Warehouse etc. It should also be able to integrate with multiple legacy systems developed earlier on J2EE technologies. Does SAP supports all the specified modules integrations? If not? Suggest me the other alternative please.
thanks in advance

Dear Karna,
Considering the generic information you have provided, It looks SAP can deal with it. SAP is able to integrate with multiple legacy systems developed earlier on J2EE technologies. I have worked on one such project and it worked perfectly fine.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Similar Messages

Regarding SAP supporting modules

Hi all,
My client is interested to implement SAP for shipping project. The system should be able to cater jetty, container terminals, Finance, HR, Logistics, Warehouse etc. It should also be able to integrate with multiple legacy systems developed earlier on J2EE technologies. Does SAP supports all the specified modules integrations? If not? Suggest me the other alternative please.
thanks in advance

Hi,
Yes the SAP system supports all the modules which you have mensioned above.So in order to integrate these modules u would have different steps to follow integration and also interfaces to carry. Yes SAP supports all the specified module integration. See to that the basis consultants and abapers set the interfaces and other settings correctly.
Regards
Can quary back if u have any issue
Asha

Auto-Cad SAP integration interface development regard problem

I have just started working on development of Autocad SAP integration interface using VC++
I want to login into SAP environment by clicking on a logon Menu on a menu bar
I want to get some idea as to how to start with this requirement.
Can somebody on the forum guide me through this.
If anybody has any idea or solution pleasssssssssss do let me know
THANKS in advance
namy

Hi Nishant,
Check your CFG file Settings
Cfg-File\SystemCfg\Defualt\SaveDark\BAPI_DOCUMENT_CREATE2\DOCUMENTFILES\Line_0
then check your settings in "General"
I.e. key "AllCadAppls" --> Value "ACD"
CheckForFileDoubles -> yes
StdKproCategory --> mention your Content Category defined in Content Server
Please let me know after doing this settings
Regards
Rehman

HP Enterprise Integration Module for SAP - Windows Server 2008

Is there a download for the HP Enterprise Integration Module which will run on Windows Server 2008 for QC Version 10? HP Support has directed me to SAP Support for the Integration Versino 2.5 and above.

Hello John,
now I have a resolution.
I have deinstalled the MS SQL 2008 and install MS SQL 2005 plus SP2 at windows 2008 64bit VMware.
After reinstall HP Quality Center everything works fine.
( SQL 2008 is not official supported )
But there is another problem with the HP Enterprise Integration module 2.50 for SAP Solution Manager 7.0 EhP1,
the installer has a problem and does not work at windows 2008.
- this is a known HP problem and they should be published a newer version without the installer problem.
Today (april 6) I can't find an update, takes a while ... the "bad" version "setup_win.exe" has 132.327 kb.
you can only download the package from:
http://update.external.hp.com/qualitycenter/qc100/ent/enterprise_integration/index.html
you can find all add-ins at:
http://update.external.hp.com/qualitycenter/qc100/index.html
You should patch HP QC 10.00 with patch 10, see note 1329891 for details, takes 10 minutes or so.
With reards,
Michael

For Professional level certification aspirants in SAP Controlling module

Dear all Professional level Certification aspirants in SAP CO module,
I have recently passed the Certification test on SAP Management Accounting (CO) module in version ERP 6.0 EHP4. I have more than 4 years experience in SAP Controlling module.The following are some of my suggestions regarding preparation for the exam.
1. All the questions were scenario based. The exam tests expert level knowledge and real time scenarios in the module. The theoritical knowledge is not sufficient to clear the exam. Unless you have atleast 5 to 6 implementations in Controlling module, it is not advisable to give it a try.
2. Detailed knowledge of the system configuration settings about the various courses mentioned in the syllabus is required. One needs a clear understanding of Special costing functions, ERP integration, Transfer Pricing, Material ledger, New GL Parallel valuation, Planning and Budgeting fuctions in various components etc.
3. The exam tests in-depth knowledge about various integration aspects of Controlling module with other modules. The advanced master data functionalities of other logistical modules like MM, SD, PP, PM, QM, PS, CS, HCM is tested in detail.
4. Several methods of process and performance optimization of the system are also tested.
3. Some reporting aspects of BW and BI are also tested. The cross application aspects of the system are also tested.
4. The exam also tests the real time skills in preparing Blueprints, Business Process design and trouble shooting the system. Being knowledgeable about some of the processing errors and message classes will be of great help.
Hope this information helps you in preparing for the certification.
Should you need any clarifications, please post a reply to this thread and I will post answers.
All the Best!!
VS.

Hi Vikrant,
the pass mark for the exam is 58%. However it may be different. The passing mark shown on your screen on the day will be the correct passing mark.
All the questions were scenario based which would involve high analytical skills and through understanding of the system integration. It would be difficult to tell any specific question. The questions carry different weightage. If you answer the questions with less weightage correctly than the questions with more weightage, you end up scoring less though you answer more number of questions correctly. and it is vice versa. Go through your syllabus and cources and try to concentrate on the topic areas which contain more weightage.
Moreover, the exam is not completely technical in nature. It tests a lot of analytical and problem solving skills required on the job.
Note:Please do not ask the questions or contents of the exam as they are confidential.
Hope this information helps you.
All the best for your exam!
Regards,
Vishnu.

'Log Book' in plant maintenance (SAP PM module)

Dear Experts
I want to know about 'Log Book' in plant maintenance (SAP PM module). How to work on LOG BOOK & what are the configuration settings available in SAP PM for Log Book?
Basically, the concept of logbook is to update shift activities & measures during Plant Maintenance without SAP. but in SAP, What i know about the Log book in SAP PM is : It is an industry specific feature, before it was only used in (IS- Aeronautical). but now it is available in ECC 6.0 also. To activate this node, we need to update the patch 2.0 in ECC 6.0
Thanx,
PMGURU

Dear,
The Logbook is an easy-to-use tool that supports the controlling and execution of daily maintenance tasks for assets in operation. This tool provides personnel, who are operating the assets, with the functions to log defects and operational data. It provides maintenance personnel, such as maintenance engineers and technicians, with functions that ensure the timely and reliable execution of their maintenance tasks.
Logbook is easy to use and provides functionality that is seamlessly integrated with follow-on processes of the mySAP for Aerospace & Defense solution for Maintenance, Repair and Overhaul (MRO). For example, operational data captured in the Logbook updates measurement points that, in turn, trigger preventive maintenance events. Maintenance work steps created in the Logbook generate material and resource requirements in materials and capacity planning. Material exchanges update the asset structure and automatically generate the required goods movements.
An important business example for using the Logbook is to control the daily line maintenance tasks for aircrafts.
The logbook helps you record defects encountered during aircraft flights and the actions taken to correct them. The log may also include the space to record additional flight data, such as the names of the crew members, flight parameters, payload data, fueling data, flight hours, and cycles operated.
Regards,
Rakesh

What is ARIS Tool? &How can we use it with SAP MM module implementaion?

Dear Friends /Consultants /Seniors of the SAP forum,
1.What is ARIS Tool?
2.What is the purpose (actual need) of this tool? And is it useful to SAP MM
Consultant during the SAP Implementation? or support? or rollout? or upgrade?
3.For which Business Process SAP Implementation, this Tool (ARIS) can be implemented? ( I mean for which industry sector this tool can be implemented or used)
4.Pls explain any business Senario using this ARIS Tool for SAP MM module implementation...
5.Is this a thirdparty tool, or who's product it is?
6.Being a SAP MM Functional Consultant, how can we utilize it during the SAP MM Implementation.
Pls do the needful,
Regards,
Srinvias.K
Message was edited by:
        sapsrin

ARIS - stands for ARchitectur Integrated Systems.
This is proprietary tool fof IDS Sheer AG,
In layman's words we can say its a tool create Flow charts.
In business we don't say these as flow charts but as EPC chains.
EVENT PROCESS CHAIN
This is a Designing tool of any kind of activity,from 4.6b ( i guess) SAP has Plug in to ARIS tool even.
For eg: If i wanna go and buy Sandwich,eat and come back to home.
its vey simple to say but if you map this in EPC.. there are lot of things come in picture.
steps
1) I get up from desk
2) Walk out of thehouse
3) Start my car
4) drive my car to XX place
5) I buy sandwich
6) Should i eat or carry out
if eat - pay for it
     look for vacant seat
     eat sandwich
      get out towards car
      drive back to home
If Carry out
Pay for it
get out towards car
drive back to home
Eat sandwich...
it still depends on how micro level control you need .
for eg: in the above process we can also include
1) pick up my car key
2) Wear shoes etc etc....
Basic aim of this tool we donot miss any event ,and to have standard predefined process flow.
If some one has better answer, please let me know.
Satheesh

How do you update the SAP Integration Kit license?

When your SAP Integration Kit license has expired, how do you update it?
For example : In designer, not being able to create OLAP universes on SAP BW anymore.
Thank you,
Raphaë

Hi Ingo
do you know, I,ve tried to put in the licens key in CMC for int.kit that I got from SAP self and also another from the marketplace page.
I getting message:
Currently held license keys (Select a key to see its licensing information)
License Key Error: Invalid Key : <my key>
There is no license added for int.kit in CMC right now, do I need to have it?
Reason to this is that we got some connection error: "The specific module could not be found" and error "WIS 10901"
This after Infoview and "refresh data"
From my opinion I would guess that this is licens problem?
Can you please help us?
regards Jacob

SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan Kanade

Hi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan

IDOC message type for "Site" in SAP Retail module?

Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
Matt

Hi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas

Business Object and SAP Integration

All,
We've BOJ Data Services XI installed.
Would like to integrate with SAP, does anyone know how or have good information about Business Object and SAP Integration?
Please adivce.

Hi Lynn,
If you need to have Business Objects and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
Link to download the useru2019s Guide:
- Please go to Http://help.sap.com
- Click on Business Objects tab
- Select the product as Integration Kit for SAP
User guide: Business Objects Integration Kit for SAP Useru2019s Guide.
I hope that helps you.
Regards,
Prashant

Error while installing SAP integration kit 3.1

Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advance

Hi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos

REQ SAP FI MODULE- CERTIFICATION EXAM QUESTIONS AND ANSWERS

REQ SAP FI MODULE- CERTIFICATION EXAM QUESTIONS AND ANSWERS
Moderator: We should be thankful that you don't require to solve the exam for you

Please type "certification" in the search field, you can find many threads regardding this.

Charts are not showing up in WEBI after the SAP Integration

folks,
              I have successfully iinstalled the following
              BOBJ XI R3.1 Java version
              Crystal Reports 2008 with SP1
              Xcelsius 2008 enterprise
              SAP GUI
              Java Connector
              SAP Integration tool kit.
Now in WEBI when I want to draw some charts which are not showing up. Please give me some suggestions.
Regards,
preddy

HI,
I would suggest you open this in the WEb Intelligence forum unless this only happens with SAP based reports.
Ingo

Help regarding SAP SCRIPT

Hi!
can any one help me regarding SAP SCRIPT. i unable to write a print program for sap script . can any one can send me sample code using ITCSY structure.
Thanks in advance.
Thanks & Regads,
DurgaPrasad.k

Hi,
refer this to write print program:
The Print Program
Structure of a print program
OPEN_FORM function
CLOSE_FORM function
WRITE_FORM
START_FORM function
END_FORM function
CONTROL_FORM function
The print program is used to print forms. The program retieves the necesary data from datbase
tables, defines the order of in which text elements are printed, chooses a form for printing and
selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine
forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed,
is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you
can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each
form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed.
RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within
an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'.
rgds,
latheesh
Message was edited by: Latheesh Kaduthara

Regarding SAP integration modules

Similar Messages

Maybe you are looking for