Regarding SAP REM
Hi ,
Whenever I run a REm complete cycle from backflush to order settlement,there is change in the material price in Material master costing view 2. Why this is happening please explain in detail.
Secondly i want to track the variance. How to find the planned cost & variance.
Please help.
Normally the Price updation takes place after costng run and Mark & Release
During costing run as per the cost component structure the prices will be calculated and updating the price
For example take one Fert material and its one bom component is Raw material , that is from 2 vendors one vendor price is Rs100 another is Rs150
Automatically the ROH variable price upated after GR say Rs125
So this impact will be happen on Fert component after costing run and update the Price with new one after release markup
K.Prabakaran
Similar Messages
-
Dear All,
I have seen many cases where REM would be the best fit but still people go for either Production or Process Order scenario. They may keep 1 Order per month & do posting in it.
I wanted to know, Is there any perticular reason because of which people dont go for SAP-REM?
Ur comments are highly apreciated.
Thanks
Nikhil DandekarHello,
You will use REM , if you are not changing your products frequently on the production line. That is your product remain fixed for a certain period for a production line. Aslo if you are working with higher quantity batches.
In discrete , you can work with more control, first the planned order is generated.
The planned order is converted into production order and then the production order is released.Creation and release functions gives you more control on the process.
In discrete , normally you work with lower quantities and frequent changes in set up.
In REM, you are directly working with the planned order.Planned order to production order conversion os not required. This leads to less control.
If on the shop floor , you are tracking the compoments and assemblies with
respect to the lot or order,for which you have manufactured the same then
REM will not be a advantage.
If you are tracking the components with respect to a part number , then REM
will be advantage and it will reduce the non value adding work of creating the production order and releasing the same.
If you require control on shop floor and you are going for REM, Then it will be
disadvantage.
But if you do not require much control and you are going for REM , Then it will be
advantage.
The cost collection also differs in REM and discrete.
In REM , you are working with product cost collector and product cost estimate.
In Discrete, the production order itself acts as a cost collection object.
Regards,
Ravindra -
Hi!
can any one help me regarding SAP SCRIPT. i unable to write a print program for sap script . can any one can send me sample code using ITCSY structure.
Thanks in advance.
Thanks & Regads,
DurgaPrasad.kHi,
refer this to write print program:
<b>The Print Program</b>
Structure of a print program
OPEN_FORM function
CLOSE_FORM function
WRITE_FORM
START_FORM function
END_FORM function
CONTROL_FORM function
The print program is used to print forms. The program retieves the necesary data from datbase
tables, defines the order of in which text elements are printed, chooses a form for printing and
selects an output device and print options.
<b>Function modules in a printprogram:</b>
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine
forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed,
is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you
can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
<b>Structure of a print program</b>
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each
form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>Some important parameters:</b>
FORM Name of the form
DEVICE PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed.
RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
<b>The print program</b>
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within
an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'.
rgds,
latheesh
Message was edited by: Latheesh Kaduthara -
Hi i am new to SCN. I want a help regards SAP-PM . Where to post any query regards SAP PM
Please check this link SAP Portfolio and Project Management (SAP RPM, cProjects) and cFolders
Please check scn index to find relevant forum link.
SCN Site Index -
Need information/training material regarding SAP CRM Functional
Hello,
I am a SD Consultant.
I want to learn SAP CRM (Functional) on my own without going to any training institute or some thing.
Therefore, can anyone help me in forwarding the link(s) or document(s) with which I can learn about SAP CRM (Functional).
I want information/training material regarding SAP CRM 7.0 (on system/software working, not the general information, for example- why CRM, where CRM, etc)
For example, about org data, org structure, possible scenarios, etc.
Thanks in advance for spending your valuable time for me.
Regards,
T. ChaitanyaHi ,
In the SDN lot of documents are there search in the WIKI.check the standard sap doc cr100. -
Hi All,I have one serious problem regarding sap b1.
Hi All,
I have one serious problem regarding sap b1.
In Sales order whenever I select the item from list or tax from list one. I got this
Msg Box (Application has a problem. Diagnostic file c|:\Program file\SAP\sap Business one \Log\Sap Business one_20080602105441.dmp was created.
Please contact support and attach diagnostic file). When select ok sap b1 application close. If anyone required screen short of all this error plz give me Ur email id I will send u.
Can any one help me?
Awaiting Early Response
Regards
Rajkumar GuptaHi Rajkumar,
create a message at the marketplace and send them the diagnostic file with an error description.
lg David -
Regarding SAP Sales & distribution.
Dear SAP Guru's ...
I have a general Query.....Career Related.
As SAP AG is Launching New products
Such as SCM Enhancements BW and other IS versions....
What will be the future situation and Market of SAP SD Consultant.
We also heard that it will be mergedwith other higher version modules.
Please advice me ....
The Market Situation future?
The Trends ?
Whch module Should I focus ..after SD......
Regards,
Amaln Sarkar
SAP SD Consultant.Dear Amlan,
Well I think the foundation of all the new dimensional products is the base modules. Moreover working on the base modules gives the opportunity to understand the business process of different verticals. So there is nothing like end for the market for base modules.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh -
Regarding sap smartforms line items
hi,
this is regarding line items in sap smartforms
when i am executing single line item i am getting out put
when i am executing with 2 line items i am getting error like bellow
You tried to switch to the next table column, but no other column exists. The current column is 9. The line type IT_GEN contains only 9 columns.
plz explain clearlyHi,
if you are using template and the line type is for 1 to 2 lines in the template... make sure that column position you mention is equal to the number of cells in the line type... if the data is displayed in the second row the row position should start from 2 and and column position should lie between 1 and 9.
Just a suggestion ... its better to go with table node instead of going with template...
regards
padma -
Hi Gurus,
Can you explain me what is SAP PP Standard Reports..with important T codes..with details
thank & Regard
Rahulhi Rahul,
Please check
http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports
http://www.sapfans.com/forums/viewtopic.php?f=9&t=235417
Regards,
Anand -
Help Required Regarding - SAP Job names using R3 data flows
We are calling a set of SAP Jobs using R3 data flows in data services. When ever a job fails we first kill the active SAP jobs by logging into SAP and then restarting the Jobs.
There are about 100 odd SAP jobs that we call using these Data services Jobs so we wanted to kill the jobs using a reusable code on the SAP side by passing the Job name just before every R3 flows just incase its still in active status.
So wanted to know if there are any short cuts to retrive the set of associated SAP job names because it will be a tedious process to hardcode the SAP job names and pass them as parameters for all the 100 + SAP job names in the custom defined resuable code.
Any help or advice on this please !!The program is not meeting the expectations
and the problem is due to reflection.Do we know this for certain?
... my application gets the class name, field name
etc. from an XML file so i don't know their method names
beforehand .
Now since every class instance corresponds to a row
in the database and i have to call get and set
methods of each class instance so the performance
keeps on degrading as the number of columns and rows increase .
Can somebody suggest some improvement regarding this
and regarding creating multiple instances of the same object Class.forName() will be using a hash already, so there is probably not much room for improvement.
Class.newInstance() probably does not take significantly more processing than a simple "new Fubar();".
Umpteen reflective method invokations (one per column) for each row/instance - Are you saying these are the problem?
You can test this easy enough.
If you comment out the reflective method invocations and leave the rest of your code untouched,
does your application processing speed up significantly? -
Regarding SAP -XI associate certification.
Hello friends,,
Can anyone give me details regarding the XI certification in Teched.
what is the success rate in Teched ?
pls also eqip me with the latest trends and patterns of the exam.
Also provide all the links which will be helpfull for me to prepare for the exam.
waiting for ur valuable responses.
Thanks n Regards,
ram
Message was edited by:
ramdevbabu reddyHi
<b>A Beginners Guide to XI Certification Details</b>
/people/community.user/blog/2006/11/03/a-beginners-guide-to-xi-certification-details
<b>Below are syllabus for XI certification:</b>
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
You will be asked 80 questions. Some of them are Multiple choice questions and some of them are true or false. You will not have any negative marks. You will get 25% of questions in BPM, 20% of questions in Adapters, Mapping. 10% of questions in Basics.
Also you go through the this links which might help you:
Re: SAp XI Certification
/message/1887921#1887921 [original link is broken]
/message/1887923#1887923 [original link is broken]
Do you have Marketplace access? If yes, you can go to the following links,it explains everything regarding certification clearly.
https://service.sap.com/%7Esapidp/011000358700005902252004E
https://service.sap.com/~sapidp/011000358700003595762004E
/thread/187737 [original link is broken]
XI certification
Go through these weblogs :
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/thread/25311 [original link is broken]
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1008087,00.html
Thanks!!
Regards
Abhishek Agrahari -
Regarding SAP PI 7.0 Configuration
Hi Experts,
We Completed The SAP PI 7.0 Installation.
Now we Are Doing The Configuration Steps.
Here We run the post installation Templates which automatically configures PI system.
<b>Steps:</b>
Step 1: Go to this link http://<host name>: <HTTP port number>/index.html
Step 2: Click on SAP NetWeaver Administrator
Step 3: Click on seeDeploy and Changelink
Step 4: First executed the templates for NWA for configuring you SLD
Step 5: Then executed the templates for PI
After this for the Importing the XI Content for Software Component Version SAP Basis
1. Here We Are Trying to Copy XI3_0_SAP_BASIS_6.40_00_12.tpz from <installation DVD>
to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
But We Are Unable to Find out <b>/repository_server/import/</b><u></u>
We Can Able to Find out the Path Upto <b>/usr/sap/<SAPSID>/SYS/global/xi/</b><u></u>
Can Anybody Please help To Go in the Right Direction
Regards
KhannaHi,
Thanks for the Reply.
This was solved by team a long back,
Sorry, i forgot to close the thread
REgards
Seshagiri -
Regarding SAP PI 7.0 Configuration of Integration Engine
Hi Experts,
We Installed SAP PI 7.0 Successfully.After that We Run the Template Installers for PI.
Here We Selected <u><b>PI Post Install Process</b></u> Option in the Template Field.
<b>Q1)</b> After Completion of this Should we Configure All IE , IS, AE Or Those wil be Configured Automatically ????
<b>Q2) </b> What are the Necessary Steps to Do Even We Run the Template Installer, To execute a Scenario Successfully.?????
Please Let me Know
Regards
KhannaHere is an extract from the OSS note. I guess,this should answer your second question
Reason and Prerequisites
To avoid problems while using the configuration wizard (template installer )please check prerequisites for post-installation in SAP documentation. That information can be found in SAP Help Portal (http://help.sap.com --> SAP Netweaver --> Installation and Upgrade guide --> Installation --> 2 - Installation - SAP Netweaver 2004s --> SAP NetWeaver 2004s Installation Documentation).
Select your Operating System and Database and look for 'Post-Installation Steps for Usage Type *' in the dedicated document.
Important: You cannot use the configuration wizard after
Upgrade
Add-In installation (Exception: Configuration of Usage Type BI-Java can be executed after Add-In Installation)
Additional usage type enablement
System copy
Always install the latest available SPS + Patches before running the CTC.( You can find the latest LMTOOLS Patch at http://service.sap.com -> SAP Support Portal -> Downloads (Tab) -> Downloads (Menue) -> Support Packages and Patches -> Search for Support Packages and Patches -> Search for: LMTOOLS*P -> Download and Save the .sca. Apply the patch by using the SDM.)
The sequence is:
1. Installation
2. Install latest SPS + Patches (if available)
3. Run configuration wizard.
You can run the configuration wizard only once for initial configuration.
In these cases, you need to perform the corresponding configuration steps as described in the configuration documentation.
For more information on how to access the configuration documentation, see 'Accessing Configuration Documentation in the SAP Solution Manager'. -
Dear All ,
I have few queries :
1) do I need to install SAP XI on Web AS machine or on a different machine .
2)What is the hardware configuration for development & for production server of SAP XI .
3)What are the prerequisites for installing SAP XI .
4) what all components we need to install while installing SAP XI
5)IMPLEMENTATION METHODOLOGIES FOR SAP XI
Kindly help me , waiting for your feedback asap
Regards
PrabhatHi Prabhat,
Go to the following link and look for the XI installation, config, tuning etc.. guides.
It will give you a good deal of idea.
Hope it helps.
https://service.sap.com/instguides
Regards,
Satish -
Hi All,
I have issue in SAP Scripts.
Issue is : I am calling a BOX command in my Layout set as follows : <b>BOX WIDTH '18.75' CM HEIGHT L_SY_TABIX1 CM FRAME 10 TW</b>
I that <b>L_SY_TABX1</b> i need to get the value form Print Program,
Can anybody clarify how can i make varaible L_SY_TABIX1 with value <b>'17.75'</b> with in single quotes.
shall i need to decalre the L_SY_TABIX1 as &L_SY_TABIX1& & then how can i get single quotes on it.
Please clarify.
Thanks in advance.
Thanks & Regards,
Rayeez.You dont have to concatenate quotes.
You can dynamically put any value into a character variable, say, ht, in your print program.
Data : ht(10) type c.
This variable should be within &, in the script. The program takes the value of height without rounding the decimals.
BOX XPOS 0 CH YPOS '+1.5' LN WIDTH 30 CH HEIGHT &HT& CH FRAME 10 TW
Thanks,
Susmitha
Maybe you are looking for
-
Adobe Muse CC 2014 keeps crashing on launch
My version of Adobe Muse CC 2014 keeps crashing on launch. I have tried to reinstall it a few times but this keeps happening. When I open a project, it works untill I close down the project, I get the following message: Can someone please help me wit
-
Updated my Ipad and now it wont get out of recovery mode.
I have an Ipad 4 and I decided to download the latest update for it. The download is fine until i pick it up a half hour later and it shows me the recovery mode image. Basically telling me to connect to my computer. I go to my computer and plug it in
-
What will happen when I plug in my new classic iPod?
Hi, I am getting a new iPod classic 80gb tomorrow, hooray! I already own a 30gb iPod video which I have just sold. When I plug my new iPod in tomorrow will everything be ok? Will it automatically sync the existing music library or wipe the lot?! Coul
-
Errors Trying to combine files into a single PDF after update?
I am not sure if an adobe acrobat update caused this but I have not been able to since at least the second most recent update. I can insert pages but If select multiple pages there is always in issue with the order. I have not tried un-installing and
-
Syclo Work Manager 6.1 Deployment Issues
Hi Experts, I am trying to Setup Syclo WM 6.1 have issues issues during the setup. I was following the Installation guide from SAP, found a clean and a neat blog from http://scn.sap.com/docs/DOC-56329#comment-506689. I am stuck at an error during dep