REGARDING SAP UTILITIES

Hello everyone,
                       plz. tell me in Device Management, What is Third party Billing?

Hi,
This is in case of a deregularised industry...
There are two terms distributor(can be electrical distribution company) and supplier( a vendor/contractor assigned to look into a specific areas)..
if the supplier performs billing with his charges sends the bill to the customer, then it is a third party billing...
if the distributor performs the billing + puts the supplier charges and sends it the customer, then it is called the consolidated bill and the process is called consoildated billing...
the distributor can send a separate bill and the supplier can also send a separte bill(Third party billing)...
Reward if useful
Regards
Shiva

Similar Messages

  • SAP Utilities Customers E-Services (SAP-UCES) - Documentation?

    Hi,
    I am trying to find SAP Help or full implimentation documentation for SAP Utilities Customers E-Services.
    Can someone please assist?
    Thanks,
    Adriaan

    Check this link:
    https://websmp106.sap-ag.de/utilities
    SAP for Utilities->SAP for Utilities - Product Information->SAP for Utilities - Product Information->UCES Documentation.
    Regards,
    Siva

  • SAP Utilities - service order

    Hi all,
    1.how to create a Service order, Disconnection, Reconnection and Maintenance orders in SAP Utilities.
    plz give me the navigation path.
    regards.
    suki

    Hi,
    All these orders can be created using Tcode = IW33. But for Disconnection, Reconnection orders you should like your orders to disconnection document (EC85).
    Thanks,
    Durgesh.

  • SAP Utilities module

    Hi All,
    I want to learn SAP Utilities module, how and where(Institute and place) i can learn this module.
    please guide me.
    Regards,
    PS

    Hello,
    Which part of Utilities you want to learn?
    Not sure about Institute...if you are looking @  documentation, pls refer the below
    For Utilities:
    http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dce68eafc11d18a030000e829fbbd/frameset.htm
    For FICA:
    http://help.sap.com/saphelp_fica472/helpdata/en/22/16983538ee425ee10000009b38f889/frameset.htm
    Hope this helps
    Rgds
    Rajendra

  • Help regarding SAP SCRIPT

    Hi!
      can any one help me regarding SAP SCRIPT. i unable to write a print program for sap script . can any one can send me sample code using ITCSY structure.
    Thanks in advance.
    Thanks & Regads,
    DurgaPrasad.k

    Hi,
    refer this to write print program:
    <b>The Print Program</b>
    Structure of a print program
    OPEN_FORM function
    CLOSE_FORM function
    WRITE_FORM
    START_FORM function
    END_FORM function
    CONTROL_FORM function
    The print program is used to print forms. The program retieves the necesary data from datbase
    tables, defines the order of in which text elements are printed, chooses a form for printing and
    selects an output device and print options.
    <b>Function modules in a printprogram:</b>
    When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine
    forms into a single spool request use START_FORM and END_FORM.
    To print textelements in a form use WRITE_FORM. The order in which the textelements are printed,
    is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you
    can also use the WRITE_FORM_LINES function module.
    To transfer control command to a form use CONTROL_FORM.
    <b>Structure of a print program</b>
    Read data
    Tables: xxx.
    SELECT *
    FROM xxx.
    Open form printing - Must be called before working with any of the other form function modules.
    Must be ended with function module CLOSE FORM
    call function 'OPEN_FORM'.....
    To begin several indentical forms containing different data within a single spool request, begin each
    form using START_FORM, and end it using END_FORM
    call funtion 'START_FORM'.....
    Write text elements to a window of the form
    call function 'WRITE_FORM'.....
    Ends spool request started with START_FORM
    call funtion 'END_FORM'.....
    Closes form printing
    call function 'CLOSE_FORM'...
    OPEN_FORM function
    Syntax:
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      APPLICATION                       = 'TX'
      ARCHIVE_INDEX                     =
      ARCHIVE_PARAMS                    =
      DEVICE                            = 'PRINTER'
      DIALOG                            = 'X'
      FORM                              = ' '
      LANGUAGE                          = SY-LANGU
      OPTIONS                           =
      MAIL_SENDER                       =
      MAIL_RECIPIENT                    =
      MAIL_APPL_OBJECT                  =
      RAW_DATA_INTERFACE                = '*'
    IMPORTING
      LANGUAGE                          =
      NEW_ARCHIVE_PARAMS                =
      RESULT                            =
    EXCEPTIONS
      CANCELED                          = 1
      DEVICE                            = 2
      FORM                              = 3
      OPTIONS                           = 4
      UNCLOSED                          = 5
      MAIL_OPTIONS                      = 6
      ARCHIVE_ERROR                     = 7
      INVALID_FAX_NUMBER                = 8
      MORE_PARAMS_NEEDED_IN_BATCH       = 9
      SPOOL_ERROR                       = 10
      OTHERS                            = 11
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    <b>Some important parameters:</b>
    FORM Name of the form
    DEVICE PRINTER : Print output using spool
    TELEFAX: Fax output
    SCREEN: Output to screen
    OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
    The input for the parameter is structure ITCPO.
    CLOSE_FORM function
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT                         =
      RDI_RESULT                     =
    TABLES
      OTFDATA                        =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SEND_ERROR                     = 3
      SPOOL_ERROR                    = 4
      OTHERS                         = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Paramerters:
    RESULT Returns status information and print/fax parameters after the form has been printed.
    RESULT is of structure ITCPP.
    WRITE_FORM function
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT                        = ' '
      FUNCTION                       = 'SET'
      TYPE                           = 'BODY'
      WINDOW                         = 'MAIN'
    IMPORTING
      PENDING_LINES                  =
    EXCEPTIONS
      ELEMENT                        = 1
      FUNCTION                       = 2
      TYPE                           = 3
      UNOPENED                       = 4
      UNSTARTED                      = 5
      WINDOW                         = 6
      BAD_PAGEFORMAT_FOR_PRINT       = 7
      SPOOL_ERROR                    = 8
      OTHERS                         = 9
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Some important parameters:
    ELEMENT Specifies which textelement is printed
    WINDOW Specifies which window is printed
    TYPE Specifies the output area of the main window. This can be:
    TOP - Used for headers
    BODY
    BOTTOM - Used for footers
    FUNCTION Specifies whether text is to be appended, replaced or added
    Example of how to use the WRITE_FORM function module together with a script.
    Form layout of the MAIN window
    /E INTRODUCTION
    Dear Customer
    /E ITEM_HEADER
    IH Carrier, Departure
    /E ITEM_LINE
    IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
    /E CLOSING_REMARK
    <b>The print program</b>
    Writing INTRODUCTION
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT                  = 'INTRODUCTION'
    FUNCTION                 = 'SET'
    TYPE                     = 'BODY'
    WINDOW                   = 'MAIN'
    EXCEPTIONS
    OTHERS                   = 8
    Writing ITEM_HEADER
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT                  = 'ITEM_HEADER'
    FUNCTION                 = 'SET'
    TYPE                     = 'BODY'
    WINDOW                   = 'MAIN'
    EXCEPTIONS
    OTHERS                   = 8
    Set ITEM_HEADER into TOP area of main window for subsequent pages
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT                  = 'ITEM_HEADER'
    FUNCTION                 = 'SET'
    TYPE                     = 'TOP'
    WINDOW                   = 'MAIN'
    EXCEPTIONS
    OTHERS                   = 8
    Write ITEM_LINE
    LOOP AT .....
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT               = 'ITEM_LINE'
    FUNCTION              = 'SET'
    TYPE                  = 'BODY'
    WINDOW                = 'MAIN'
    EXCEPTIONS
    OTHERS                 = 8.
    ENDLOOP.
    Delete ITEM_HEADER from TOP area of main window
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT                  = 'ITEM_HEADER'
    FUNCTION                 = 'DELETE'
    TYPE                     = 'TOP'
    WINDOW                   = 'MAIN'
    EXCEPTIONS
    OTHERS                    = 8
    Print CLOSING_REMARK
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    ELEMENT                  = 'CLOSING_REMARK'
    FUNCTION                 = 'SET'
    TYPE                          = 'BODY'
    WINDOW                   = 'MAIN'
    EXCEPTIONS
    OTHERS                    = 8
    START_FORM function
    CALL FUNCTION 'START_FORM'
    EXPORTING
      ARCHIVE_INDEX          =
      FORM                   = ' '
      LANGUAGE               = ' '
      STARTPAGE              = ' '
      PROGRAM                = ' '
      MAIL_APPL_OBJECT       =
    IMPORTING
      LANGUAGE               =
    EXCEPTIONS
      FORM                   = 1
      FORMAT                 = 2
      UNENDED                = 3
      UNOPENED               = 4
      UNUSED                 = 5
      SPOOL_ERROR            = 6
      OTHERS                 = 7
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    END_FORM function
    CALL FUNCTION 'END_FORM'
      RESULT                         =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SPOOL_ERROR                    = 3
      OTHERS                         = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CONTROL_FORM function
    The CONTROL_FORM function module alows you to create SapScript control statements from within
    an APAB program.
    Syntax:
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
    command         =
    EXCEPTIONS
      UNOPENED        = 1
      UNSTARTED       = 2
      OTHERS          = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Example:
    Protecting the text element ITEM_LINE
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
    COMMAND = 'PROTECT'.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    TEXELEMENT = 'ITEM_LINE'.
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
    COMMAND = 'ENDPROTECT'.
    rgds,
    latheesh
    Message was edited by: Latheesh Kaduthara

  • SAP Utilities

    Is there any help link or document on this topic.
    I want SAP utilities for water industries..
    <b>SAP for Water industries..</b>

    Please check this document:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/4dc54beafc11d18a030000e829fbbd/frameset.htm
    - April King

  • Hi i am new to SCN. I want a help regards SAP-PM . Where to post any query regards SAP PM

    Hi i am new to SCN. I want a help regards SAP-PM . Where to post any query regards SAP PM

    Please check this link SAP Portfolio and Project Management (SAP RPM, cProjects) and cFolders
    Please check scn index to find relevant forum link.
    SCN Site Index

  • Need information/training material regarding SAP CRM Functional

    Hello,
    I am a SD Consultant.
    I want to learn SAP CRM (Functional) on my own without going to any training institute or some thing.
    Therefore, can anyone help me in forwarding the link(s) or document(s) with which I can learn about SAP CRM (Functional).
    I want information/training material regarding SAP CRM 7.0 (on system/software working, not the general information, for example- why CRM, where CRM, etc)
    For example, about org data, org structure, possible scenarios, etc.
    Thanks in advance for spending your valuable time for me.
    Regards,
    T. Chaitanya

    Hi ,
    In the SDN lot of documents are there search in the WIKI.check the standard sap doc cr100.

  • Hi All,I have one serious problem regarding sap b1.

    Hi All,
    I have one serious problem regarding sap b1.
    In Sales order whenever I select the item from list or tax from list one. I got this
    Msg Box (Application has a problem. Diagnostic file c|:\Program file\SAP\sap Business one \Log\Sap Business one_20080602105441.dmp was created.
    Please contact support and attach diagnostic file). When select ok sap b1 application close. If anyone required screen short of all this error  plz give me Ur email id I will send u.
    Can any one help me?
    Awaiting Early Response
    Regards
    Rajkumar Gupta

    Hi Rajkumar,
    create a message at the marketplace and send them the diagnostic file with an error description.
    lg David

  • Operand/Fact Group Sap Utilities Issue

    Hi
    I was wondering if you can help me, I can't seem to update an Operand in SAP Utilities.
    I get the following error:
    Timeslice 05.05.2013, Operand GRT-FIX, Ratetype G-FIX98 incorrect, expected
    G-FIXxx entry.
    There is already a fix rate identified for this billing period, I'm going in circles. Any help or a walk through guide would be highly appreciated?
    Thanks
    Waz

    Thanks Tammy
    Appreciate this, I joined SAP Communities to get some help. I'll find a way to access the notes you've mentioned. In honesty, I don't know who would be our Basis Admin to gain access to SAP Notes.
    Once again thanks for pointing me to the right direction
    Waz

  • SAP Utilities/CCS

    Hi Gurus,
    I have a requirement to extract data from SAP IS-Utilities in to bw.
    can any one help he to list of available standard data sourcess.
    very much appriciate for your help.
    Thanks,
    Babu

    hi,
    you can find the data source's under
    IS--SAP INDUSTRIES
    0IS_AU--AUTOMOTIVE
    OIS_AU-IO--AUTOMOTIVE MASTER DATA
    0IS_OIL----- OIL & GAS
    OIS_OIL-IO---- OIL & GAS MASTER DATA
    IS-R---- RETAIL
    0BA_RDB_AN_1                      Ratios
    0BA_RDB_AN_3                      Amounts in Display Currency
    0BA_RDB_AN_5                      Amounts (Risk) in Display Currency
    0BA_RDB_AN_6                      Amounts (P+L) in Display Currency
    these are the IS data source in r/3. 
    if helpful provide points
    regards
    harikrishna.N

  • Regarding SAP Sales & distribution.

    Dear SAP Guru's ...
    I have a general Query.....Career Related.
    As SAP AG is Launching New products
    Such as SCM Enhancements BW and other IS versions....
    What will be the future situation and Market of SAP SD Consultant.
    We also heard that it will be mergedwith other higher version modules.
    Please advice me ....
    The Market Situation future?
    The Trends ?
    Whch module Should I focus ..after SD......
    Regards,
    Amaln Sarkar
    SAP SD Consultant.

    Dear Amlan,
    Well I think the foundation of all the new dimensional products is the base modules. Moreover working on the base modules gives the opportunity to understand the business process of different verticals. So there is nothing like end for the market for base modules.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Regarding sap smartforms line items

    hi,
    this is regarding line items in sap smartforms
    when i am executing single line item i am getting out put
    when i am executing with 2 line items  i am getting error  like bellow
    You tried to switch to the next table column, but no other column exists. The current column is 9. The line type IT_GEN contains only 9 columns.
    plz explain clearly

    Hi,
    if you are using template and the line type is for 1 to 2 lines in the template... make sure that column position you mention is equal to the number of cells in the line type... if the data is displayed in the second row the row position should start from 2 and and column position should lie between 1 and 9.
    Just a suggestion ... its better to go with table node instead of going with template...
    regards
    padma

  • Regarding SAP PP Reports

    Hi Gurus,
    Can you explain me what is SAP PP Standard Reports..with important T codes..with details
    thank & Regard
    Rahul

    hi Rahul,
    Please check
    http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports
    http://www.sapfans.com/forums/viewtopic.php?f=9&t=235417
    Regards,
    Anand

  • Help Required Regarding - SAP Job names using R3 data flows

    We are calling a set of SAP Jobs using R3 data flows in data services. When ever a job fails we first kill the active SAP jobs by logging into SAP and then restarting the Jobs.
    There are about 100 odd SAP jobs that we call using these Data services Jobs so we wanted to kill the jobs using a reusable code on the SAP side by passing the Job name just before every R3 flows just incase its still in active status.
    So wanted to know if there are any short cuts to retrive the set of associated SAP job names because it will be a tedious process to hardcode the SAP job names and pass them as parameters for all the 100 + SAP job names in the custom defined resuable code.
    Any help or advice on this please !!

    The program is not meeting the expectations
    and the problem is due to reflection.Do we know this for certain?
    ... my application gets the class name, field name
    etc. from an XML file so i don't know their method names
    beforehand .
    Now since every class instance corresponds to a row
    in the database and i have to call get and set
    methods of each class instance so the performance
    keeps on degrading as the number of columns and rows increase .
    Can somebody suggest some improvement regarding this
    and regarding creating multiple instances of the same object Class.forName() will be using a hash already, so there is probably not much room for improvement.
    Class.newInstance() probably does not take significantly more processing than a simple "new Fubar();".
    Umpteen reflective method invokations (one per column) for each row/instance - Are you saying these are the problem?
    You can test this easy enough.
    If you comment out the reflective method invocations and leave the rest of your code untouched,
    does your application processing speed up significantly?

Maybe you are looking for