Regarding Screen Variants

Hi Experts,
Screen Variants are not working correctlyi.e. the variant is not getting activated for the specified user ids. Fews days back, the variants were working properly. I have created variants for tcode FB60, FV70 etc. and have transported them to production and they are working fine. But now even in development client, when i am trying to create screen variant for tcode MM01 and MM02, the changes are only seen in my user id. Even if i assign other user ids, it is not getting applied to them.
What must be the reason??
Thanks in advance
Edited by: priti suryawanshi on Jul 3, 2009 10:51 AM

hai priti,
if it was workign earlier and now problem it migh tbe due to some authorization problem ,
just check with ur basis may be some profile might have changed
m.a

Similar Messages

Regarding Screen Variant for tcode va11

hi all,
i am trying to create a screen variant for tcode va11. the fileds in the item level has to changed.. we have a requirement to show only those fields that are usefull as per our clients requirement.. there are fields which will never be used .. so we have top remove it .. i have created a screen variant and made all the fiedls not needed invisible .
then i link this csreen variant to a transaction varaiant .. howver when i execute
this i don't find any difference in screen .. guess my screen variant not working..
Is there anything we have to take care for table control.
the Program name is SAPMV45A
Screen number is 4900
please if any body has done this before ,,kindly suggest.
thanks and regards
Sriniavs

this variant is in Active state ?
what is system status ?
check which PF/GUI it is using .
system-->status>Program here u have to get ur Zvariant name.
Regards
Prabhu

Text Field is not displaying in MIRO , Screen Variant SHD0

Hi,
All Experts.
In my client TEXT field is not there in MIRO T.code. I heard Screen Variant can be a good option for adding field in MIRO.
Or is there any work around to bring TEXT ( SGTXT ) field in MIRO ?
I gone through the already posted threads regarding this, unfortunately no any perfect solution found.
Experts help will be great on this.
Regards,
Sharvari Joshi.

Hi,
Go to SHD0 and enter transaction code as MIRO
Then in first tab "Standard variant", sub tab "Standard Variants", do F4 on the field "Name"
You will get the list of the standard Variants for MIRO.
Then select one of them and press enter. It the "Activate Match Stick" is enables, that means that standard variant is not activated yet. Similarily check for other standard variants of MIRO.
If all the standard variant have "Activate Match Stick" enabled, then SAP MIRO should be showing SGTXT as a part of standard SAP.
Regards,
SDNer

Screen Variant is not reflecting same value in different transactions.

Hi Guys,
I need a help, it is urgency.
I done the screen variant for one filed is mandatory and another field in display mode (gray color) for transaction (FPR1 in ISU). After I done the screen variant the standard transaction code (FPR1) showing same result, what I am expecting.
But the problem is, I want to maintain or enter the values from CIC front office screen.
Once I confirm the BP and select the contract account to create install plan (FPR1), here it is open with standard view, which is not displayed with screen variant changes.
What should i check in that case. I already checked with
T.code : EWFC, EWBC.
Thanks in advance. Your guidance is appreciated
Regards,
Venkat.

Hi,
Even if you group valuation/view currency is the same as controlling area currency, the system will still show the message above. SAP need you to acknowledge that you're now costing for different valuation than your operation (legal valuation).
Note: Normally we execute sales order costing for group valuation in the background. You can read note 1819102 on how to remove that warning message when costing via background.
Thanks,
Ong Yang

Screen variant not working when assigned to transaction variant in SHd0

Dear All,
User requires tax code column for line items in MIRO to be made non-editable. I am using SHD0 transaction for the same. I am able to make the column grey-off by creating screen variant. The program is SAPLMR1M and screen number 6310. When tested individually thru SHD0 the variant is working perfect. But it is not working when assigned to a transaction variant. Any clues on the same would be really helpful.
Thanks in advance
Komal

Hi,
Try to record again for the whole set of screens instead of doing that for the individual tax screen and only for the tax screen make the required field disable.
Once done and saved, you can see all the screens variants in the transaction variant.
Use the Change WITH PROCESSING OPTION.
Hope this solves your problem
Regards
Shiva

Screen Variant Not working

Hi,
I have created one screen variant for screen for SAPLBBP_SC_UI_ITS screen 230.
It's getting called while i checked by debugging .
But its not working in ITS Template & in transaction also .
In SAPgui it's not working .
Is there any more setting for Screen variant apart from just save it & called in screen variant BADI .
Thanks,
SS

Hi
<u>This BADI as you can see by name is for Screen Variants.
BBP_SCREENVARIANT in this case.</u>
<b>Please read the following documentation to get the clear difference</b>
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).
Screen variants
Screen variants allow you to simplify screen editing by:
Inserting default values in fields
Hiding and changing the ready for input status of fields
Hiding and changing the attributes of table control columns
A screen variant contains field values and attributes for exactly one screen. A screen variant can, howevever, be assigned to multiple transaction variants. Screen variants are always cross-client; they may, however, be assigned to a client-specific transaction. They can also be called at runtime by a program. The different possibilities for calling screen variants guarantee great flexibility of use.
For more information, see: Calling Screen Variants
A specific namespace has been designated for screen variants and they are automatically attached to the Change and Transport System.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Variable screen/variant screen authorization issue

HI All,
We have implemented standard Cost Center Overview Report(0SR_C02_Q0002) in BI 7.
We have three selection fields:
1.Company Code which is mandatory
2.My controlling Area which is also mandatory
3.Costcenter which is not mandatory
The requirement we are facing over here is that in the Variable screen/variant screen when I enter a company code, then I need to display dynamically only those "My Controlling Area" values which are assigned to that particular company code and not all. In the same way after selecting the appropriate "My controlling area" value, I need to display only those cost centers in the cost center selection field which are assigned to the selected company code and My controlling area combination and not all.
can anyone guide me on how to go about on this authorization issue at the variable screen itself.
Please treat this issue/requirement on high priority.
Appreciated in advance.
Regards,
raps.

Hi,
I think that an alternative to solve your concern could be using Web Application Designer (WAD). In this respect, there are several design options, with different levels of complexity.
As the simplest alternative, you could create a WAD including your query and three Dropdown Boxes: one for Company, a second for Controlling area and another for Cost center. The four mentioned elements should be linked to the same dataprovider so, when you select a company, the options in the other two Dropdown boxes and the information in the query are updated.
In order to enforce mandatory filter selection at Company and Controlling area level, you should set NO_REMOVE_FILTER='X' in both two Dropdown boxes, so that "All values" option -which would mean no filtering- is not offered.
I hope this helps you.
Regards,
Maximiliano

How to create transaction or screen variant for custom tcode in module pool

Hi,
I have one module pool program with custome tcode ,i want to create transaction or screen variant for this tcode.Next time when we run this tcode we need a variant for this tcode.
I tried by using of SHD0 but it is working only for standred tcodes.Is there any possibilty please help me.
thanks,
Lavanya.

Hi,
you created a Custom Tcode for ur module pool Pgm..if u execute the Tcode in the output screen give the input details and press Save Option then variant will be created. Then you can use that variant.
otherwise.. while creating a Tcode..
select an option for Tcode type Tranasction With variant ..there u will provide the variant for ur Tcode ( which is already created ).
Regards,
PraVeen.

Error while Adding field on Screen Variant

Hi SAP Gurus,
I want to add one field Trading partner in Fast entry screen.
I am getting below error message while adding one field Trading Partner in Screen Variant ES007(O7E6)
FIELD instruction for field BSEG-VBUND missing on template screen
Message no. F4171
Please let me know where do I have to maintain Trading partner field in template screen.
A quick response on this is highly appreciate.
Regards,
SATVIR SINGH
Edited by: Satvir S Digwa on Oct 6, 2010 12:41 PM

Hi
Go through the below link:
Re: Trading partner in Field Status Group
Rgds
Vani

Issue in Creating a screen variant for FV50 through SHD0

Hi,
I need to create a Screen variant for FV50 to hide the post button through the Transaction SHD0, It was working fine and the function keys BU and BS i disabled in the variant, but the problem is when i disabled the Function keys from FV50 it is not allowing me to post the transaction in FBV0 also. I found that T code FV50 is using the program :SAPMF05A and FBV0 is using : SAPMF05V.
Is there any way to overcome the issue through the transaction SHD0 ?
Regards
San

Hi,
To Create aVariant You can use Tcode : SHD0.
Provide the tocde and clik on Screen variant and create...
You can follow the below link as Reference ..
Link:[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
Hope it helps you.
Thanks
Arbind

Wf or Screen Variant for ME11

Hello Friends,
Greetings!!!!!!!!
I am in need to make the Purchse Order Fully automated.
I.e.
When the Purchase person enter Vendor, PO Herder Data(Pur. Org, Pur. Group,, Company code), and make the PR Read to PO it should read all the data from PR + Info Record.
These requirement is getting met. But to authentic the data maintained in Info Record (Me11), Like: Tax code, Conditions etc, I need to maintain the cycle of Info Record Creation process through from SAP WF/Screen Variant.
Hence,,,,,,,
I am in need to create Work Flow for Purchase Info Record (Trx ME11). I have search out for any STD object availability, found not available.
I have already triedn the BUS3003, but not able to find the requirement.
Pls guide me how to proceed?
Regards,
Shyamal

I think you are right FRENKY.
So closing the thread.
Regards,
Shyamal

Cannot select the newly created Screen variant in ENJOY transactions.

Hello All,
I have created a screen variant for a specific requirement from the client in transaction SHD0.
However I am unable to select this new screen variant in all ENJOY transactions.
When I try to select the screen variant in FB50-Post GL through>EDIT>Screen Variant, Select,Reset and Create Screen variants are greyyed out.
I have checked the setting in SU3, as well as FB00 for the Parameters, it appears to be correct.
Kindly help at the earliest!!
Regards
Shrutika

Hi,
Shrutika.
Try this I hope this may help you.
Go to FB50 at above left hand side will see Tree On option button. Click on that you will see Screen vairants for items option with drop down object. Simply click on that now select your desired screen variant by double clicking applied.
I hope this may help you to solve your issue. If you have any doubts feel free to ask.
Regards,
Pankaj A Bhalerao.

T-Code MIRO with assigned screen variants

Dear Experts,
We are using a BDC recording to call MIRO and send it to an agent via workflow using a z-table.
The customer wants the baseline date on this recording grey'ed out and the business area field required.
The baseline date is on the "PAYMENT" tab of MIRO and Business Area on the "DETAILS" tab.
I assigned three screen variants to a transaction variant and activated it. When I post via MIRO outside the BDC recording, everything works perfect.
However, with the BDC a SAP standard transaction with assigned screen variants doesnu2019t work?
How can I do it via BDC?
Transnet Freight Rail

Hi Suresh,
FI user tell me, when she entry the incoming ivoice by T-Code MIRO,
she typed $1882 (TWD) amount in "Basic datea Tab", and typed Item amount $1882(TWD) (System Default Where User Entry Delivery Note),
but when she clicked clisimulate button,
the system procedure FI Document as below :
Debit : Accrued Accounts Payable : $1883 (TWD) <-- GR/IR Account
Credit : AP - Vendor 1 : $1882 (TWD)
Credit : Price difference-direct material $1 (TWD)
I have already checked that invoice data. The invoice amount is $1882(TWD),
but when user post fi document, the GR/IR Account Amount is $1883(TWD),
How did I know the GR/IR Account $1883(TWD) is how to produce?
Best regards,

Screen Variants in Webdynpro

Hi @ all,
just a simple question. Is their a possibility for using screen variants in WD4A like know out of R/3 selection screens?
Thnx
Matt

Hi Matthias,
This is feature is not available for SelectOptions in WDA. Nonetheless, it can be emulated by providing save/load buttons and saving/loading the data to/from some place.
Best regards,
Thomas

Selection screen variant...

Hi Gurus,
My requirement is I need to call a prepare a selection screen and create a variant of that screen..
Then user will put the name of the variant as selection id in "Production Planning run " screen...I neeed to fetch all product ids based on the sejection screen variant and store that internal table of user exit
APOCDPS1....The internal table name is "E_SEL_PEGID_TAB". It is there in the FM Exit_SAPLCDPSUSER_02 ....
Please help,,,how to do??
I also need to write a query in the user exit on a table to fetch what are stored in the variants where the variant name is selection id given by the user...Which table and which fields are maintaining that in APO..

You should go to transaction /SAPAPO/CDPSB0. create the screen variant there and then you can call this varient in transaction CDPS1.
Regards.
Nitin Thatte

Regarding Screen Variants

Similar Messages

Maybe you are looking for