Regarding seeburger adapter??

Hello guys
My client is going to implement EDI messages to SAP XI to SAP ERP .It would be great if you let me know the step by step proceedure ??
wht is the use seeburger  BIC mapping tool here ??
wht is the configuration should be done at sender side(seeburger as2) adapter??

So this means your customer has purchased a Seeburger adapterlicense which will come with documentation for PI. Use that as first entry point. Such a general question you can not handle well in forum answer.
General first hints:
Seeburger delivers an EDI-adapter which will be deployed into PI. This adapter contains functionality to map between XML and EDIfact format. It also contains (normally) some standard mappings (e.g. for invoice). But be VERY careful with these standard mappings. Not all of them can be used without change. Make detailed tests and do not rely on them.
The BIC mapping designer is not used in PI, but you can see it as a kind of external development or debugging tool in case of problems. You will surely use it, because there are many pitfalls regarding EDIFact and XML/PI. The topic is quite complex.
CSY

Similar Messages

  • Seeburger adapter information

    Hi All,
             I need information about iWay Seeburger adatpeter.how to do mapping .pls send any sample weblogs or scenarios regarding Seeburger adapter.please send to me any documents of seeburger adapter.My mail Id is [email protected]
    Thanks & Regards..
    Ramesh

    Hi,
    ><i>I need information about iWay Seeburger adatpeter.</i>
    SeeBurger and Iway are 2 separate vendors providing Adapters to Integrate XI with various applications!
    SeeBurger Provides adapters for EDI and Iway provides adapters for PeopleSoft etc
    SeeBurger~~
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a --> Good theorotical info!
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33 --> Gives an overview of Installing the EDI adapters in the 3rd section and also leads you to the entire Installation guide!!
    Iway~~
    /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
    /people/vedavyas.cuntheepuram/blog/2005/04/02/publish-messages-in-tib-from-xi
    Regards
    Bhavesh

  • Forum for SEEBURGER Adapter

    Hi ALL,
               I have been posting quiet a few questions on SDN regarding SEEBURGER Adapter, But I don't seem to be getting much help in SDN. I understand there is not much information avaiable on net about SEEBURGER Adapter. Is anyone aware of any forum dedicated for SEEBURGER Adapter?
    Regards,
    XIer

    Hi Xler
    <b>pls go through these links for more information on SEEBURGER Adapter</b>
    http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
    Need Material on Seeburger Adapters.
    Seeburger Adapter
    Installing seeburger adapter
    http://www.seeburger.com/xi-adapters/
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
    Please see this threads for some more information on this:
    Seeburger AS2 Adapter
    Seeburger
    have a look also on these URl's
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    Thanks
    Pls reward if useful

  • Bsi mapping in seeburger adapter

    hi experts,
    i want to know about bic mapping in idoc to edi scenarios in which i am using seeburger adapter.please help me and provide me some documentation.

    Hi,
    BIC is mapping tool which converts EDIFACT to EDI_XML.
    You will be accepting EDI flat file i.e. csv file and using BIC you will map it 1:1 mapping ....this flat file will be converted into EDI_XML after mapping.
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    Regards,
    Akshay Jamgaonkar.
    Don't forget to reward points.
    Message was edited by:
            Akshay Jamgaonkar

  • EDI SEEBurger Adapter

    We are evaluating  XI for ANSI X12 EDI , Have some  EDI Quesitions using SEEBurger Adapter.
    1) Does SEEBurger Adpater has ANSI X12 Enveloping and De-Enveloping capabilities ???  If Yes,how this is configured /Developed.
    2) Does SEEBurger Adapter has capability of generating sequential ISA control numbers by Trading Partner ??? If Yes,how this is configured /Developed.
    3) Can It perform  EDI Structure validation based on the  EDI standard  rules (For eg: Looping structures, Element qualifier restriction list .....)

    Hi,
    Seeburger is a tool which will conver any type of standard EDI format into XML.
    All standard EDi mappings are predefined in seburger,we have to install in XI Server and use that standard mappings.
    Check this links
    SEEBURGER
    http://www.seeburger.com
    Please see the below blogs
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.com
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Regards,
    Phani
    Reward Points if Helpful

  • EDI TRADACOM through Seeburger Adapter into PI

    Has anybody configured communication channel in PI using Seeburger Adapter to convert EDI TRADACOM into xml ?
    Is there a useful tutorial to have a look at ?

    >>Has anybody configured communication channel in PI using Seeburger Adapter to convert EDI TRADACOM into xml ?
    Yes
    >>Is there a useful tutorial to have a look at ?
    Well, there is nothing specific avauilable for TRADACOM. TRADACOM is just a type of format as we have EDIFACT OR X12. You can search for EDIFACT related articles/blogs on SCN (there are many). The only thing you then need is to use TRADACOM related mapping name in BIC module wherever you see EDIFACT mapping name.
    One more thing, for using TRADACOM, there is a separate licence where Seeburger provides the TRADACOM related SWC with all the formats. So talk to Seeburger about this as well.
    Regards,
    Prateek Raj Srivastava

  • How do we do File content conversion using SFTP SEEBURGER Adapter

    HI All,
              Can we do FCC using SFTP SEEBURGER adapter. If yes how?
    XIer

    Dynamic attributes are part of the XI message. They provide options for dynamical configuration of SFTP receiver channels (Outbound direction) using parameters that have been dynamically added or set by modules and mappings before the SFTP adapter. These attributes can be set using the Attribute Mapper module for example. Besides, the SFTP adapter dynamically adds specific parameters to the XI message on Inbound case, which can be used by the modules and mappings after SFTP adapter.
    Check also
    /people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
    /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
    Regards
    Naycho

  • How to configure SFTP seeburger adapter

    Hi All,
               Has anyone worked with Seeburger adapter? Could someone tell me how to configure it in XI ?
    XIer

    Hi XIer,
    Check out the following links
    http://www.seeburger.com/sftp_xi/
    http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
    Best Regards,
    Guza
    Message was edited by:
            liad aharoni

  • Integration of Seeburger Adapter in Solution Manager for Monitoring

    Hi Experts ,
    Can we Integrate the  monitoring of Seeburger adapter into the Solution Manager dashboard under central PI Monitoring ?
    We are using   AS2, FTP and sSFTP seeburger adapters here.
    Regards,
    Kamal
    Edited by: KAMAL KUMAR on Jan 11, 2012 2:33 PM

    Hi,
    check  [this.|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/408e1501-fb8c-2e10-edba-f51f13cde64e?QuickLink=index&overridelayout=true]
    Page 29 has useful information on adapter/channel monitoring.
    -santosh.

  • Sender / Receiver ID mapping for EDI interfaces and Type of seeburger adapt

    We need to set up a interface using Seeburger adapter for Purchase order IDOC to 850 EDI mapping.. After reading from SDN,
    1) We can use the standard mapping in BIC MD to do E2X and X2E mapping..
    2) We can use any of the AS2, EDI generic adapter, Seeburger FTP adapter or Seeburger SFTP adapter...
    How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security...
    Also how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID
    Also the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping.

    Hi Kris,
    I had worked in the somehow same scenario, It was IDOC to EDIFACT file.
    I can give you few clues which might be helpful
    In BIC MD you have to create your own mapping if the standard mapping is not available (First check all the standard mappings in BIC). For your reference you need X2E mapping, as your scenario is IDOC to 850 EDI.
    "the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping."
    In graphical mapping i created my own mapping, Seeburger has given some sample mappings you can check those for your reference (SEEBURGER_GENERIC_EDI software component). Mostly you have to create your own. You need a document from your functional consultant so that you are able to map correct fields and constants.
    "how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID"
    This has been generally hardcoded in message mapping (In my case i hardcoded). If any of ur IDOC field contains that data you can map that field. But better Idea is ask your functional expert.
    "How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security... "
    You can choose adapter according to your requirement. In my case i used File adapter as i have to create file in PI server only. My suggestion you can use SFTP for seeburger
    Hope these points are helpfu for u
    Regards,
    Shradha

  • How to import seeburger adapter and mdm adapter in sap pi 7.3

    Hi all,
    how to import seeburger adapter and mdm adapter in sap pi 7.3

    Hello
    To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
    Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
    Regards
    Mark

  • Seeburger adapter monitoring

    We are running Seeburger AS2 adapter with XI3.0.
    All inbound messages that the adapter can handle are passed to XI and we have access to those from XI message monitoring.
    From there we have alerting setup.
    Whenever an external party presents a message with a bad certificate the AS2 adapter refuses the message.
    We can see trace of that in the adapter monitor. But there is no message in error passed to XI. So nothing we could get in message monitoring.
    We saw we have a logfile containing those errors on the server. We could setup a logfile monitor on this file and get errors in CCMS. And from there, we could trigger alerts. But that does not look very elegant.
    Is there a best way to get Seeburger adapter error generating alerts ?

    Hi,
    If the check is happening in the Adapter then the Alerts needs to be raised by Adapter framework.
    So you have to set up Alert rule for the Adapter framework.
    The message goes to message montioring only if the adapter sends the date to the Adapter engine and then you can see the message in the message monitoring.
    If the rejection is at AF levelt hen you need to check in the Communication Channel if you are getting the Error?
    Regards
    Vijaya

  • Seeburger Adapter

    Hi all,
    I have installed a generic seeburger FTP adapter, but I dont have any VAN connectivity at present. Can I convert the EDI ANSI X12 format to xml with this installation or it requires VAN connectivity to do this.
    In this case do we require the BIC mapper? if so how to work with BIC mapper?
    In the communication channel, I am able to see the installed Seeburger FTP adapter but it does not show the transport and message protocol. Is this related to the Installation/setup of VAN connection.
    Regards,
    Nithiyanandam

    Hello..
    SeeBurger is a leading provider of global business integration solutions.
    Market launch of the most successful EDI solution for the automotive industry in 1986.
    the company today serves more than 7,000 customers in 42 countries and more than 15 industries through its flagship B2B Gateway and related products and services.
    First company worldwide to receive certification for SAP R/3
    Building a closer partnership with SAP.
    Extended any-to-any-conversion.
    The SEEBURGER Business Integration Converter (BIC) is an Any-To-Any Format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex,high performance XML-to-XML mappings or to interface to existing JDBC Data Sources.
    Supported EDI formats include: ANSI, EDIFACT, INHOUSE, IDOC, XML Schema, XML DTD, CSV,Delimited Data, positional data, SWIFT, EANCOM and many more.
    Mapping Designer, a graphical tool, easily defines data format conversions via drag and drop functionality, enabling easy integration between source and destination files. A central mapping reposiu00ADtory enables comprehensive support of versioning and deployment support, such as self-testing and auditing.
    The SAP Exchange Infrastructure message format is based on XML, but it also can work with non-XML data using attachments. In some cases it may be necessary to convert the main XML document in a message, into a non-XML document. The use of BIC is very common in Business-to-Business scenarios where EDI standards are in use.
    The Business Integration Converter (BIC) of Seeburger is based on Java JIT Technology and can be used for small real-time messages, as well as very large master data (i.e.Catalogs) batches.
    BIC can convert outbound invoices from XML format (used in SAP XI) to an EDIFACT invoice. The conversion can be executed before the message is transmitted to the business partner. The other way around, once an EDIFACT message has been received from the business partner, it must first be converted to XML format, which is the format SAP XI supports.
    The most direct way of using the Seeburger adapters is to configure the BIC as a module. BIC will allow you to do the following
    Once you install BIC, you need to do Import the Generator Mappings into the Project Explorer of BIC MappingDesigner.
    You can find Generator Mappings as a ZIP file in the following location <BICMappingDesignerInstallationDirectory>\user\bicmd\Exchange and select the file prj_GeneratorMappings.zip.bicmd.
    In MappingDesigner select File Import Generator Mappings Zip File prj_GeneratorMappings.zip.bicmd Clik on “Add” and “OK”.
    Once Import is done you can see “Generator Mappings” in BIC Mapping Designer.
    The SEEBURGER Adapter runs on the SAP WEB AS (J2EE Engine)
    The SEEBURGER Adapter is integrated into the SAP Exchange Infrastructure over JCA (Java Connector Architecture)
    Consequence :
    Supply of the complete SEEBURGER EDI/B-to-B-Technology-Suite within SAP NetWeaver
    Central File of Business Content (mappings, integration processes) in the Integration Repository of SAP XI
    Central configuration and design by using the Tools of XI in the configuration
    Central monitoring and alerting over SAP XI
    Seeburger Solutions Overview
    BIC Mapping Module
    Functional Acknowledgement Solution
    Operational Dashboard / Archiving
    Invoice Solutions
    Communication
    The Business Integration Converter (BIC) from SEEBURGER is a converter for the implementation of data formats.
    Following formats are available:
    ANSI X.12 (American National Standards Institute)
    CSV (Comma Separated Variable formats)
    EDIFACT (all subsets)
    INHOUSE (VDA, flatfiles, e. g. SAP IDoc)
    SWIFT (banks)
    TRADACOM (Trading Data Communications Standard)
    XML (DTD‘s and SCHEMATA)
    Able to classify messages into the following message types:
    XML
    EDIFACT
    Ansi X 12
    Tradacom
    VDA
    IDOC
    Swift
    Inhouse
    XML Ansi X 12
    XML EDIFACT
    XML Tradacom
    XML VDA
    XML IDOC
    Go through this links..
    Some more..
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Reward Points if it is really useful to you.....
    Thanks,
    Satya Kumar..

  • Issue in receiver SFTP seeburger adapter

    Dear all,
    We have a proxy to sFTP scenario.
    The target message is being delivered to a sFTP system using a receiver sFTP Seeburger adapter.
    I have this error being shown in the receiver channel.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true.
    The Seeburger WorkBench monitoring has a 2 error entries which says
    1. PUT command for file <TEMP_20110406_115127.TXT> is in progress.
    2. "Error on send, will be retried"
    Finally, the .txt file is partially written in the receiver system.
    If anyone has any inputs/pointers to resolve this issue. Pls share the details.
    regards,
    Jack.

    Hi Jack,
    We are also facing the same problem with the seeburger SFTP adapter. If you find the solution , Plz let us know.
    Thanks,
    Soumya.

  • SFTP Seeburger adapter - Could not find channel for report handling between

    Hello Friends ,
    We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
    Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
    Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
    Could experts help me ...
    Thanks for your time .
    Regards,
    Laxman Nayak .

    Hi,
    I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
    I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
    Any help would be greatly appreciated.
    Thanks,
    Alan

Maybe you are looking for

  • Just to say thanks! also 1 question.

    I was amazed to get a phone call from Apple a few days back regarding a problem I encountered with my iMac saying they read this forum and wanted to study my iMac to help improve production and troubleshoot. As they wanted to take my old iMac they ar

  • HT203200 i get a -50 error message when trying to sync my iphone. Why?

    i get error message -50 when trying to sync my iphone. Does anyone know why?

  • 5th Generation - can't update to i Pod ver 1.2 and can't restore ??!!#*

    Hope somebody can help ? Uploaded iTunes Vers 7. In summary page selected update for vers 1.2 iPod but got message saying that couldn't due to ".... file in use by another application". After reviewing help tried to restore and got same message as ab

  • Updating Serial numbers coming from third party at PGI

    Hi all,       I have an requirement such that I need to update the serial numbers for a line item that are coming from third party system and these serial # needs to updated in the PGI processing of delivery. I have searched  in the SDN , but could n

  • Drag layers moving sluggish in firefox

    Hi, I'm working on a web site here: http://www.cssdreams.com/sites/searchinfo/homepage.html And (haven't tested in IE6, but IE7 mind you) for some reason you can drag the maginfying glass around just fine in IE, but it moves rather sluggish and chopp