Regarding SEEBURGER

Hi ALL,
Could you plz tell me ,
In IDOC to EDI SEEBURGER Scenario, We have to purchage the SEEBURGEREDI Adapter Software ?
Where to install the SEEBURGER Software ? In XI System or Non-SAP System ?
Any Configuration required in Non-SAp System ?
Thanks & Regards
Murali

Hi,
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Thoughts on EDI in an SAP XI Environment
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
The below links will answer your all questions
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Thanks
Swarup

Similar Messages

Regarding Seeburger Adpater

Hi can any one tell me what are seeburger adpaters and how actually is it used in EDI based intergrations

HI,
please look in to this links u will come to know about seeburger adapter.
HI,
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
Supported EDI formats include:
ANSI
EDIFACT
INHOUSE
IDOC
XML Schema
XML DTD
CSV
Delimited Data
positional data
SWIFT
EANCOM
and many more.
See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Seeburger thread:
Refer this forum which is replied by me which talka about the configuration which need to be done for AS2 adapter. This is very helpful:
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Re: Seeburger AS2 adapter...
Re: AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??
Seeburger info:
Re: seeburger adapter
Re: SEEBURGER's VAN Adapter
AS2 info:
Re: Regarding Seeburger AS2 Adapter
Thnx
Chirag Gohil

Regarding Seeburger AS2 Adapter

Hi,
Wheni go thru my adapters list i didn't find Seeburger AS2 adapter in the list, but my client wants to use the Seeburger AS2 adapter for their scenario's. What should i do in order use the Seeburger AS2 adapter. Is it a third party adapter? do we need to get any license from SAP to use this adapter. Or is there any equivalent adapter available in XI for seeburger AS2 adapter. Kindly suggest
Regards,
Venkat

Hi,
Yes your understanding is right. Normally for B2B the customer sends data over WAN or through Mailbox and ususally the data is encrypted using digital certificate for security reasons.
For B2B the data is send in EDI format (EDIFACT,TRADACOM,INHOUSE and many more) and the seeburger adapters like AS2,X400,OFTPS are used to convert the EDI format to XML and viceversa..
Thanks and Regards,
Chirag gohil

Regarding Seeburger Classifier Module

Dear Expert,
I am using Seeburger EDI Adapter to handle EDI plain file into SAP XI. As I just want to use the Seeburger build-in mappings start with "See_", I did not set the parameter classifierMappingID of Seeburger Classifier Module, but always get the output of Seeburger Functional Acknowlegement. How can I set the parameters to use the build-in mappings like "See_E2X_ANSIX12_810_V4010"?
Any suggestion or idea are appreciated!
Thanks and Regards,
Nick

Hi Nick,
you need to choose if you want to use classifier or predefined mapping name. The purpose of classifier is to classify your message (exp. ANSI 12, EDIFACT etc.) and than to find the mapping specified in Seeburger Message splitter (from http://<XI Host>:<J2EE port>/seeburger/index.html -> Message splitter).
In Message splitter you need to choose you sender agreement from XI, Mapping name and sender number (for ANSIX12 it's the value of ISA06 from inbound ANSI message).
Please check Seeburger manual SAPXI_FunctionalAck_en.pdf.
If you need your communication channel to process only ANSIX12_810_V4010 messages than you don't need classifier and you can hardcoded parameter mapping name "See_E2X_ANSIX12_810_V4010".
Regards
Naycho

Regarding seeburger adapter??

Hello guys
My client is going to implement EDI messages to SAP XI to SAP ERP .It would be great if you let me know the step by step proceedure ??
wht is the use seeburger BIC mapping tool here ??
wht is the configuration should be done at sender side(seeburger as2) adapter??

So this means your customer has purchased a Seeburger adapterlicense which will come with documentation for PI. Use that as first entry point. Such a general question you can not handle well in forum answer.
General first hints:
Seeburger delivers an EDI-adapter which will be deployed into PI. This adapter contains functionality to map between XML and EDIfact format. It also contains (normally) some standard mappings (e.g. for invoice). But be VERY careful with these standard mappings. Not all of them can be used without change. Make detailed tests and do not rely on them.
The BIC mapping designer is not used in PI, but you can see it as a kind of external development or debugging tool in case of problems. You will surely use it, because there are many pitfalls regarding EDIFact and XML/PI. The topic is quite complex.
CSY

Query regarding Seeburger Classifier

Hello,
We have a problem with Russian characters where these are cut by AS2 adapter.
In order to analyze this,I have changed the configuration to use Classifier instead of giving fixed mapping name.
Now,I can see the log as:
2009-09-17T09:58:27.144+0200 INFO starting conversion Edifact_XXX (id : 7281816071253174307119 ) at Thu Sep 17 09:58:27 CEST 2009
2009-09-17T09:58:27.172+0200 INFO starting conversion See_E2X_ORDERS_UN_D96A (id : 14608852671253174307172 ) at Thu Sep 17 09:58:27 CEST 2009
2009-09-17T09:58:27.664+0200 INFO Child Dest   Encoding : UTF-8
2009-09-17T09:58:27.664+0200 INFO Child Source Encoding :
2009-09-17T09:44:56.541+0200 INFO Child XML Encoding :
Problem still persists.
Child Source Encoding and Child XML Encoding are always blank in the log.
I have tried setting source encoding using BIC module ,CharsetConversion module, and setSourceEncodingFromClassifier module.
Still ,I cant see any value in thes fields in the log.
Can anybody please let me know how can I populate these values.
I suspect that the problem with special characters is because of incorrect source encoding.
Thanks.
Regards,
Shweta

This is some mapping code (as used in the SEEBURGER standard mappings) from the NewMapping program, which passes the encoding input parameters to the child mappings.
// Source Encoding
copy getInputValue("srcEncoding")        to srcEncoding$;
setInputValue("getChildSourceEncoding", srcEncoding$);
// Destination Encoding
copy getInputValue("destEncoding")       to destEncoding$;
setInputValue("getChildDestEncoding", destEncoding$);
In the child mapping we read the passed parameters and set the values (the if in the beginning results from a different handling for split messages):
copy getInputValue("SplittingMode") to splittingMode$;
copy splittingMode$ to Split%;
if Split% = 1
   modifyWarningLevel(2150,4);
   stopReadingOnError("off");
   copy getInputValue("getChildDestEncoding") to ChildDestEncoding$;
   if ChildDestEncoding$ != ""
      #javastart
      m_stdout.setEncoding(_StrVar_CHILDDESTENCODING.getString());
      #javaend
   else
      ChildDestEncoding$ = "UTF-8";
      #javastart
      m_stdout.setEncoding("UTF-8");
      #javaend
   endif
   traceln("Child Dest   Encoding : " & ChildDestEncoding$);
endif
// Getting Source Encoding Paramteter
copy getInputValue("getChildSourceEncoding") to ChildSrcEncoding$;
if ChildSrcEncoding$ != ""
    #javastart
    m_stdin.setEncoding(_StrVar_CHILDSRCENCODING.getString());
    #javaend
endif
traceln("Child Source Encoding : " & ChildSrcEncoding$);
// Getting XML Encoding Parameter
copy getInputValue("setXMLEncoding") to ChildXMLEncoding$;
if ChildXMLEncoding$ != ""
    #javastart
    m_stdout.setXMLEncoding(_StrVar_CHILDXMLENCODING.getString());
    #javaend
endif
I hope this helps, you may have a look at the standard mappings shipped by SEEBURGER in addition where this functionality is included !

Regarding Seeburger SFTP adapter

Hi experts,
can any one send me the seeburger SFTP end to end interface document?
Regards
MP Reddy

Hi ,
end to end scnearion not sure any one documented as a blog or wiki, but sure there are some discussions on the same topic , pls d search.,
SAP it self offering SFTP adapter these days, so customer point of view good idea to use SAP SFTP adapter.
Reagrds,
Raj

Regarding Seeburger Adapters

Hi Everyone.
First of all "Happy New Year to Everybody"
I want to know what are all the Adapters available in Seeburger and usage of each Adapter. I am aware of some Adapters like AS2,BIC adapters.
I need more Information of all the Adapters.
Thanks & Regards,
Varun

check below links :
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
XI 3 and EDIFACT
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Sandeep

Regarding Seeburger Inbound Mapping.

Hi Everyone,
I am doing an Inbound Mapping from ANSI to IDOC using Seeburger Mapping Tool.
My Source Structure has the following LIN Segment
LIN (Item Identification) has Multiple Qualifiers and ID's like
235 (Product/Service ID Qualifier)
234 (Product/Service ID)
235 #2(Product/Service ID Qualifier)
234 #2(Product/Service ID)
235 #3(Product/Service ID Qualifier)
234 #3(Product/Service ID)
235 #4(Product/Service ID Qualifier)
234 #4(Product/Service ID) ..... and so on.
my mapping requirement is
For every qualifier
235 = "MG",
235 #2 = "MG",
235 #3 = "MG",...... i need to map source field (MATNR) to ID's 234 , 234 #2, 234 #3....
similarly,
so for every qualifier
235 = "KJ",
235 #2 = "KJ",
235 #3 = "KJ",...... i need to map source field (INSMK) to 234, 234 #2, 234 #3....
Please suggest me, how should i proceed, I would Appreciate if anyone could help me.
Regards,
Varun Reddy.K

Hi,
what are your source and target structures?
Regards,
AKshay

Seeburger Mapping

Hi,
I am venkatesh , working on EAI mainly in EDI mapping with tools like GXS,Gentran...
I have knowledge on SAP XI.
I have gone through all the links/threads specified in the SDN regarding seeburger and I have also seen some material on configuration of seeburger adapter to XI but
I need training material (pdf,ppt)on Seeburger EDI mapping or seeburger BIC mapping guide or any document which tells how to use the BIC mapper in detail in seeburger with SAP XI.
Can anyone help me on this..Your help will be really appreciated..
My mail id is [email protected]
Thanks and Regards
Venkatesh

hi
Go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Thanks

SEEBURGER BIC

Hi All,
I have a question regarding Seeburger BIC, I have read thru one of the Blogs (/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact) which tells that Native EDIFACT is converted into XML EDIFACT and the actual mapping is done in SAP XI. When Seeburger BIC has the capability of coversion from ANY to ANY format why it is preffered to do the mapping in SAP XI.
Can anybody explain what are the pros and cons of using Seeburger BIC for any to any conversion.
Regards,
Bharani

I feel SAP XI is a middleware tool and doesn't have the capabilities for the EDI Mapping
Without Seeburger there is a possibility for developing of adapter or adapter module for this conversion. Seeburger however provides many other functionalities like monitoring and supporting various protocols.
mapping in SEEBURGER would be lot more easier in SEEBURGER when compared to SAP XI.
This is possible. It is not mandatory to use Seeburger with XI. However when you post question in XI forum you will get replies related to Seeburger linked with XI only
There is a conversion engine present if you purchase Seeburger alone and have no XI associated with it. The problem here is seeburger can change the structure of message but does not have vast support of adapters as XI does. Therefore Seeburger with XI provides the best solution. This would be of your interest
http://www.seeburger.com/any-to-any/
Regards,
Prateek

SEEBURGER Error (Outbound from XI): SSLHandshake Exception

Dear SAP experts,
Need your help regarding Seeburger error that i was encountering during our testing.
SAP have successfully triggered an IDoc from their system and was successfully sent to SAP XI for message translation. SAP XI have successfully translated the message and will be sending the output message via AS2 of XI to AS2 of the third party.
But, as looking the Seeburger (message monitor) of XI, there is an error logged:
Status Description: Could not deliver as2 message to partner: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # null
The AS2 of the third party is also their SSL certificate.
Can somebody help me what is the root cause of the error?
Thank you very much in advance.
Have a great day!
Godofredo

Hi Soumya,
Thank you for your information.
The XI certificate we are using wa not yet expired. (will be expired by Sept 2008).
The second link, i think, was not applicable, since, we are using AS2 adapter and not Soap adapter.
Im still checking what could be the root cause of the issue.
Hope you can help me with this one.
Thanks!

Seeburger AS2 - connectivity

Hello,
is it possible to have one single certificate for both AS2 and SSL, using HTTPS protocol.
if yes should we upload the certificates twice (AS2 & SSL)?
Also when we sent some messages via AS2, the seeburger AS2 server seems to be closing the connection abruptly. are there any logs generated on the seeburger side in order to check what actually happened?

Hi,
AS/2 details:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Seeburger thread:
Refer this forum which talk about the configuration which need to be done for AS2 adapter. This is very helpful:
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Re: Seeburger AS2 adapter...
Re: AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??
AS2 adpater-- Configuration details for both SND and RCV.
AS2 Sender Adapter -- Need few details.
Flow of data:
EDI-SEEberger-XI-IDOc-R/3
Seeburger info:
Re: seeburger adapter
Re: SEEBURGER's VAN Adapter
AS2 info:
Re: Regarding Seeburger AS2 Adapter
SEEBURGER EDI adapter
Wanna Party ?
Wanna Party ?
How to Set up an SAP XI Integration Directory Scenario with Party to Support EDI Partner Processing
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Here is the link for your reference:
EDIFACT to XML - Stylus Studio Solution
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Or
Using the Conversion agent
How to get started using Conversion Agent from Itemfield
Conversion Agent a Free Lunch?
Integrate SAP Conversion Agent by Itemfield with SAP XI
More on the SAP Conversion Agent by Itemfield
SAP XI supports EDIFACT
How to get started using Conversion Agent from Itemfield
More on the SAP Conversion Agent by Itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
SAP XI supports EDIFACT
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Regards,
Nithiyanandam

Seeburger High Tech Adapter Vs EDI INT AS2 adapter?

I have a couple of questions regarding Seeburger High Tech Adapters and EDI INT AS2 adapter.
1. My client wants to use EDI INT AS2 adapter for transmitting their EDI documents to their trading partner. Can we just buy the EDI INT AS2 adapter? If yes, will this include the other Seeburger modules like
Classifier, BIC, Splitter, and Functional Ack solution, and BIC Mapping Designer?
2. What is the difference in buying the Seeburger High Tech Adapters Vs EDI INT AS2 adapter?
Your help will be greatly appreciated.
Thanks.
Karma

You could buy only the AS2 adapter. As per my knowledge, the license changes according to the adapters you buy. If you opt to buy only the AS2 adapter, then it will not include the BIC, Mapping designer etc.

Seeburger adapter information

Hi All,
I need information about iWay Seeburger adatpeter.how to do mapping .pls send any sample weblogs or scenarios regarding Seeburger adapter.please send to me any documents of seeburger adapter.My mail Id is [email protected]
Thanks & Regards..
Ramesh

Hi,
>I need information about iWay Seeburger adatpeter.
SeeBurger and Iway are 2 separate vendors providing Adapters to Integrate XI with various applications!
SeeBurger Provides adapters for EDI and Iway provides adapters for PeopleSoft etc
SeeBurger~~
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a --> Good theorotical info!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33 --> Gives an overview of Installing the EDI adapters in the 3rd section and also leads you to the entire Installation guide!!
Iway~~
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
/people/vedavyas.cuntheepuram/blog/2005/04/02/publish-messages-in-tib-from-xi
Regards
Bhavesh

Regarding SEEBURGER

Similar Messages

Maybe you are looking for