Regarding selction screen values

Hi ,
In my report there are two parameter
1. country
2.airport code
when i enetred country , then the airport will display the corresponding airports and description only,
there is a table where i get the country , airports and descriptions,
Please suggest how to solve this
regards,
krishna

Hi,
as per my understanding you have to provide the F4 help for airport based on the country code entered, if my guess is correct follow the below procedure.
write the code in "at selection-screen on value-request for airport"
1) use the function module "DYNP_VALUES_READ" function module to capture the country entered on the selection screen.
2) select the airports based on the country code entered.
3) us the function moduel "F4IF_INT_TABLE_VALUE_REQUEST" to display the airport list in list of possible window.
Refer the below code you will understand.
here i am taking material and material description, based on the entered material i am fetching the material description on F4 help.
TABLES: mara.
DATA:
     BEGIN OF x_matnr OCCURS 0,
           matnr LIKE mara-matnr,
           maktx like makt-maktx,
     END   OF x_matnr.
DATA:
     l_dynprofld      TYPE help_info-dynprofld,
     l_matnr(7) TYPE c VALUE 'P_MATNR',
     l_prog     TYPE sy-repid,
     l_dynnr    TYPE sy-dynnr.
PARAMETERS: p_matnr LIKE mara-matnr,
            p_maktx like makt-maktx.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_maktx.
   PERFORM f_get_values.
FORM f_get_values.
DATA: i_return LIKE ddshretval OCCURS 0,
      i_dynpfields like DYNPREAD occurs 0 with header line,
      l_repid like sy-repid.
      l_repid = sy-repid.
      i_dynpfields-fieldname = 'P_MATNR'.
      APPEND I_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname   = l_repid
      dynumb   = '1000'
    tables
      dynpfields = i_dynpfields .
IF sy-subrc = 0.
     READ TABLE I_DYNPfields INDEX 1.
     IF SY-SUBRC = 0.
        CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
          EXPORTING
            input    = I_DYNPfields-FIELDVALUE
         IMPORTING
           OUTPUT    = I_DYNPfields-FIELDVALUE.
        select matnr maktx from makt into table x_matnr
               where matnr = I_DYNPfields-FIELDVALUE.
     ENDIF.
ENDIF.
IF NOT X_MATNR[] IS INITIAL.
l_prog = sy-repid.
l_dynnr = sy-dynnr.
l_dynprofld = l_matnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
    retfield               = 'MAKTX'
   dynpprog               = l_prog
   dynpnr                 = l_dynnr
   dynprofield            = l_dynprofld
   value_org              = 'S'
TABLES
    value_tab              = x_matnr
   return_tab             = i_return.
IF sy-subrc NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM.                    " F_GET_VALUES
Reward if useful.
Thanks,
Sreeram.
Edited by: Sreeram Prasad on Jan 3, 2008 11:38 AM
Edited by: Sreeram Prasad on Jan 3, 2008 11:39 AM

Similar Messages

JOB_SUBMIT   with Selection Screen Value

I have a requirement :
with other select-options and parameters, i have two radio button, Foreground and Background:
when Background radio button will be selected program should be scheduled as a background job.
How i will pass selection screen value in JOB_SUBMIT ??
Cheers.
Srikanta

Hi ,
Try This
*& Report ZMMVB_PG_SL_CHANGE_BDC
REPORT zmmvb_pg_sl_change_bdc.
TABLES : mara,t133a,marc.
DATA i_t133a LIKE t133a OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
        matnr LIKE marc-matnr,
        werks LIKE marc-werks,
        ekgrp LIKE marc-ekgrp,
       END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
         matnr LIKE marc-matnr,
         werks LIKE marc-werks,
         dispo LIKE marc-dispo,
END OF itab1.
DATA : fname LIKE ibipparms-path ,
       ename TYPE string,
       mode.
DATA: BEGIN OF it_t133a OCCURS   0,
        bilds LIKE t133a-bilds,
        pstat LIKE t133a-pstat,
        guifu LIKE t133a-guifu,
        auswg LIKE t133a-auswg,
      END OF it_t133a.
DATA: ctr TYPE i,
       ctr_s(2) TYPE n,
       wrk(35),
       ch(1),
       viewno(2) TYPE n,
       guifu LIKE t133a-guifu.
DATA: BEGIN OF it_views OCCURS 30.
        INCLUDE STRUCTURE mbildtab.   " Selection Views
DATA: END OF it_views.
DATA bdc_data LIKE bdcdata OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-000.
PARAMETERS : ek RADIOBUTTON GROUP rg1 ,
             sl RADIOBUTTON GROUP rg1
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-001.
PARAMETERS : fg RADIOBUTTON GROUP rg2 DEFAULT 'X',
             bg RADIOBUTTON GROUP rg2.
SELECTION-SCREEN END OF BLOCK c.
START-OF-SELECTION.
IF fg = 'X'.
    mode = 'A'.
ELSEIF bg = 'X'.
    mode = 'E'.
ENDIF.
IF ek = 'X'.
    guifu = 'SP09'.
    PERFORM bdc_ekgrp_change.
ELSEIF sl = 'X'.
    guifu = 'SP12'.
    PERFORM bdc_mrpcontroller_change.
ENDIF.
*&      Form BDC_EKGRP_CHANGE
*       text
* --> p1        text
* <-- p2        text
FORM bdc_ekgrp_change .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = sy-repid
      dynpro_number = sy-dynnr
      field_name    = ' '
    IMPORTING
      file_name     = fname.
IF NOT ( fname IS INITIAL ) .
    ename = fname .
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = ename
      filetype                = 'DAT'
    TABLES
      data_tab                = itab
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab[] IS NOT INITIAL.
    LOOP AT itab.
      REFRESH bdc_data.
      IF itab-matnr NA sy-abcde AND itab-matnr NA '/*-_.'.
        UNPACK itab-matnr TO itab-matnr.
      ELSE.
        TRANSLATE itab-matnr TO UPPER CASE.
      ENDIF.
      SELECT SINGLE * FROM mara WHERE matnr = itab-matnr.
      IF sy-subrc NE 0.
        CONTINUE.
      ENDIF.
      PERFORM view_routine.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-MATNR'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'RMMG1-MATNR'
                                    itab-matnr.
      CONCATENATE 'MSICHTAUSW-DYTXT(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                      wrk.   "'MSICHTAUSW-DYTXT(08)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      CONCATENATE 'MSICHTAUSW-KZSEL(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_field       USING   wrk "'MSICHTAUSW-KZSEL(08)'
                                      'X'.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-WERKS'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_field       USING 'RMMG1-WERKS'
                                    itab-werks.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '4000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=BU'.
* PERFORM bdc_field       USING 'MAKT-MAKTX'
*                                '"HEX BOLT M16X1.5X100,B8.8,BP"'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'MARC-EKGRP'.
* PERFORM bdc_field       USING 'MARA-MEINS'
*                                'NOS'.
      PERFORM bdc_field       USING 'MARC-EKGRP'
                                    itab-ekgrp.
* PERFORM bdc_field       USING 'MARA-MATKL'
*                                '1702'.
* PERFORM bdc_field       USING 'MARC-USEQU'
*                                '3'.
* PERFORM bdc_field       USING 'MARC-KORDB'
*                                'X'.
      CALL TRANSACTION 'MM02' USING bdc_data MODE mode UPDATE 'S'.
    ENDLOOP.
ENDIF.
ENDFORM.                    " BDC_EKGRP_CHANGE
*&      Form BDC_MRPCONTROLLER_CHANGE
*       text
* --> p1        text
* <-- p2        text
FORM bdc_mrpcontroller_change .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = sy-repid
      dynpro_number = sy-dynnr
      field_name    = ' '
    IMPORTING
      file_name     = fname.
IF NOT ( fname IS INITIAL ) .
    ename = fname .
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = ename
      filetype                = 'DAT'
    TABLES
      data_tab                = itab1
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab1[] IS NOT INITIAL.
    LOOP AT itab1.
      REFRESH bdc_data.
      IF itab1-matnr NA sy-abcde AND itab1-matnr NA '/*-_.'.
        UNPACK itab1-matnr TO itab1-matnr.
      ELSE.
        TRANSLATE itab1-matnr TO UPPER CASE.
      ENDIF.
      SELECT SINGLE * FROM mara WHERE matnr = itab1-matnr.
      IF sy-subrc NE 0.
        CONTINUE.
      ENDIF.
      PERFORM view_routine.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-MATNR'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'RMMG1-MATNR'
                                    itab1-matnr.
      CONCATENATE 'MSICHTAUSW-DYTXT(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                       wrk.         "'MSICHTAUSW-DYTXT(11)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      CONCATENATE 'MSICHTAUSW-KZSEL(' viewno ')' INTO wrk.
      CONDENSE wrk NO-GAPS.
      PERFORM bdc_field       USING   wrk          "'MSICHTAUSW-KZSEL(11)'
                                    'X'.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-WERKS'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_field       USING 'RMMG1-WERKS'
                                    itab1-werks.
      PERFORM bdc_dynpro      USING 'SAPLMGMM' '4000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=BU'.
*      PERFORM bdc_field       USING 'MAKT-MAKTX'
*                                    '"HEX BOLT M16X1.5X100,B8.8,BP"'.
*      PERFORM bdc_field       USING 'MARA-MEINS'
*                                    'NOS'.
*      PERFORM bdc_field       USING 'MARC-DISGR'
*                                    '701'.
*      PERFORM bdc_field       USING 'MARC-EKGRP'
*                                    'A00'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'MARC-DISPO'.
*      PERFORM bdc_field       USING 'MARC-DISMM'
*                                    'PD'.
      PERFORM bdc_field       USING 'MARC-DISPO'
                                    itab1-dispo.
*      PERFORM bdc_field       USING 'MARC-DISLS'
*                                    'MB'.
      CALL TRANSACTION 'MM02' USING bdc_data MODE mode UPDATE 'S'.
    ENDLOOP.
ENDIF.
ENDFORM.                    " BDC_MRPCONTROLLER_CHANGE
*&      Form bdc_dynpro
*       text
*      -->PROGRAM    text
*      -->DYNPRO     text
FORM bdc_dynpro USING program dynpro.
CLEAR bdc_data.
bdc_data-program = program.
bdc_data-dynpro   = dynpro.
bdc_data-dynbegin = 'X'.
APPEND bdc_data.
ENDFORM.                        "BDC_DYNPRO
*        Insert field                                                  *
FORM bdc_field USING fnam fval.
CLEAR bdc_data.
bdc_data-fnam = fnam.
bdc_data-fval = fval.
APPEND bdc_data.
ENDFORM.                    "BDC_FIELD
*&      Form VIEW_ROUTINE
*       text
* --> p1        text
* <-- p2        text
FORM view_routine .
CLEAR viewno.
SELECT * FROM t133a INTO CORRESPONDING FIELDS OF TABLE i_t133a
                WHERE bilds = '21' AND guifu LIKE 'SP%' .
LOOP AT i_t133a .
    ch = i_t133a-pstat.
    IF mara-vpsta NA ch .
      DELETE i_t133a     .
      CONTINUE .
    ENDIF .
ENDLOOP.
SORT i_t133a BY guifu ASCENDING .
LOOP AT i_t133a .
    viewno = viewno + 1 .
    IF i_t133a-guifu = guifu .
      EXIT .
    ENDIF .
ENDLOOP .
ENDFORM.                    " VIEW_ROUTINE
Regards,

For new entries pass input screen values to PBO of maintenance view

For maintaining Z table using a customized program with selection screen and FM   'VIEW_MAINTENANCE_CALL' is called . Its working fine for selecting existing entries as per selection screen values. In case if there is no entry found as per input values the maintenance screen comes blank with "No entries found that match selection criteria".
Instead of this want to pass input screen values on maintenance view if no entry is found thru PBO selection screen. The total & extract tables are empty. No suitable event is found. How this can be done.
Thanks
pt

You could try in a first step to read database to check existence :
CALL FUNCTION 'VIEW_GET_DATA'
EXPORTING
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist
    data        = data
EXCEPTIONS
    OTHERS      = 1.
If data found, call the view maintenance
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    action      = 'U'
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist.
else create one new record providing required value in a work area
CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
    EXPORTING
      action               = 'INS'
      view_name            = 'ZXXXX'
      insert_key_not_fixed = ' ' " if full key provided
      no_transport         = 'X'
    TABLES
      dba_sellist          = it_sellist
    CHANGING
      entry                = wa_zxxxx
    EXCEPTIONS
      OTHERS               = 1.
Regards,
Raymond

Screen values are not retained in Tcode BP, onclick of SAVE button

Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
Regards,
Deepthi.

OSS Note 1254214 is applied and it is solved.

ABAP Query - Selection Screen Values Usage

Hi,
I have created an ABAP Query. For one of the selection-screen fields (CAUFV-FTRMI)
which is select-options, I want to use the values during coding (in the where clause of a select query)
in Extras section under the event "record processing". Please suggest how to make the the selection-screen values
available during record processing event. Thanks in advance.
Regards,
Tejas Savla

Hi Kartik,
I need to fetch data from some table KEKO depending on the values entered on the selection-screen for the field CAUFV-FTRMI. So, I need to find a way by which the selection-screen input values are available in the record processing event. The values are available in some variable SP$00002 of the automatically generated report program. But, this variable cannot be used in the Coding section of the ABAP QUERY. Please advise.
Thanks & Regards,
Tejas Savla

Display seletion screen values in alv grid output

Hi,
I am changing from alv list to alv grid. In ALV list after displaying output, in application tool bar one button is there that is "Display selections", when i click it, is giving all selection screen values in a popup. i want same funtionality in ALV grid.
By
jagan

Hi,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program     = l_repid
      i_callback_top_of_page = 'TOP_OF_PAGE'
FORM top_of_page .
PERFORM populate_top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = ig_header.
ENDFORM.                    " top_of_page
*&      Form populate_top_of_page
FORM populate_top_of_page .
REFRESH ig_header.
CLEAR wg_header .
wg_header-typ = c_h.
wg_header-info = 'Selection Criteria:'(004).
APPEND wg_header TO ig_header.
CLEAR: wg_header.
IF NOT s_lgort IS INITIAL.
    CONCATENATE s_lgort-low '-'(111) s_lgort-high
           INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Storage Location :'(005).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
IF NOT s_ekgrp IS INITIAL.
    CONCATENATE s_ekgrp-low '-'(111) s_ekgrp-high
           INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Purchasing Group :'(006).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
IF NOT s_werks IS INITIAL.
    CONCATENATE s_werks-low '-'(111) s_werks-high
           INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Plant :'(007).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
ENDFORM.                    " populate_top_of_page
Hope this is helpful...
Regards
Milan

ST06 Screen values are not showing as ecpected

Hi Experts,
ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
All fileds are showing "Zero Values" since last week and i just found tht today.
I Went to
SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
Compare recent days for server cambsvr13    Date/time 27.06.2008 13:40:31
Average values for peak workload
Date      Usr Sys Idl    Pages in/h             Pages out/h               Swap space              Lan packets/h          Lan errors/h
           avg avg avg         max        avg         max        avg    max size   min free         max        avg         max        avg
20080626    0    0    0           0          0           0          0           0          0           0          0           0          0
20080625    0    0    0           0          0           0          0           0          0           0          0           0          0
20080624    0    0    0           0          0           0          0           0          0           0          0           0          0
20080623    0    0    0           0          0           0          0           0          0           0          0           0          0
20080622    0    0    0           0          0           0          0           0          0           0          0           0          0
20080621    0    0    0           0          0           0          0           0          0           0          0           0          0
20080620    0    0    0           0          0           0          0           0          0           0          0           0          0
20080619    0    0    0           0          0           0          0           0          0           0          0           0          0
20080618    0    0    0           0          0           0          0           0          0           0          0           0          0
20080617    0    0   99      17,240      9,685      97,730     97,575   10485,760 9,023,492      22,430     21,205           0          0
20080616    0    0   99       7,260      3,978     101,340     97,418   10485,760 9,057,327      21,940     19,447           0          0
20080615    0    0   99       1,390      1,088     101,330
99,113   10485,760 9,162,058      16,199     15,970           0          0
Best Regards,
Vinod

Try stopping the SAPOSCOL NT service. Then, copy this folder (making a backup):
installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
Then, clear out everything inside of installdrive\usr\sap\prfclog
Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check.

Problem in passing selection screen values using CALL TRANSACTION.

Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
Harsh

Hi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params,
       gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey

Read Screen values in Select options

Hi Experts,
              I am using FM 'DYNP_VALUES_READ' for reading the Screen values. The problem is, this FM runs fine for parameters where single value is returned but in case of Select-options where i have ranges, How to use this FM?
Help will be appreciated
Regards
Sourabh

Hi ,
Thanks for your valuable inputs.
I have acheived my requirements with FM 'DYNP_VALUES_READ' itself.
Here is how i have acheived this. I have passed both LOW and HIGH in the internal table it_fieldvalues.As a result i got both the values of the ranges.
REFRESH it_fieldvalues.
it_fieldvalues-fieldname = 'S_AEDAT-LOW'.
APPEND it_fieldvalues.
CLEAR it_fieldvalues.
it_fieldvalues-fieldname = 'S_AEDAT-HIGH'.
APPEND it_fieldvalues.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname                         = sy-repid
      dynumb                         = sy-dynnr
    TRANSLATE_TO_UPPER             = 'X'
REQUEST                        = ' '
PERFORM_CONVERSION_EXITS       = ' '
PERFORM_INPUT_CONVERSION       = ' '
DETERMINE_LOOP_INDEX           = ' '
    TABLES
      dynpfields                     = it_fieldvalues
EXCEPTIONS
   invalid_abapworkarea           = 1
   invalid_dynprofield            = 2
   invalid_dynproname             = 3
   invalid_dynpronummer           = 4
   invalid_request                = 5
   no_fielddescription            = 6
   invalid_parameter              = 7
   undefind_error                 = 8
   double_conversion              = 9
   stepl_not_found                = 10
   OTHERS                         = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Sourabh

Screen value of table control in ME21N tcode condiions tab

Hi ALL,
I have a problem in ME21 Tcode .I want to read screen field value of net price of Screen ME21N tcode conditions tab.
when I change tax code in delivery tab then condition tab values changes according to price procedure.I want to read that conditions tab Net price value nothing but unit price (amount field in screen) and need to do validation .
i used the BADI but could not able to find the screen value using DYNP_VALUES_READ fm.
kindly sugest the solution.
regards,
padmaja.

Hi
In BADI ME_PROCESS_PO_CUST, method PROCESS_ITEM or in method CHECK, for interface IF_PURCHASE_ORDER_MM, use method GET_CONDITIONS.
For instance in method CHECK
include mm_messages_mac.
data: header       type mepoheader,
        items        type purchase_order_items,
        po_line      type mepoitem,
        line_item    type purchase_order_item,
        po_condition type mmpur_tkomv,
header = im_header->get_data( ).
items = im_header->get_items( ).
loop at items into line_item.
    po_line = line_item-item->get_data( ).
    call method line_item-item->get_conditions
      importing
        ex_conditions = po_condition.
endloop.
I hope don't forget anything.
I hope this helps you
Regards
Eduardo

Screen value not being captured in Report

Hi,
I have a designed a report program with multiple tabs. When i enter data into the selection fields, its not storing the values during the start of selection event. When i save the values as variant and then use it, the program works perfectly.
Can some one tel me what peice of code can be added to read the screen values during start of selection?
Regards,
Niyaz

Hi Masood,
Thanks for your reply.
Any ways thats solved by reading the value from the form_fields table in the
DO_HANDLE_DATA event of the view.
Masood,
I have a different question as
I have a requirement wherein I have to
get a field similar to NOTES field we see in the Web UI , I tried using the textbox but i dont think we can process data inside the textbox.Is there any other way by which I can achieve this requirement.
Any suggestions will be highly apprecited.
Regards,
Sijo

Selection screen value

can any one suggest, how to capture the selection screen value on the selection screen itself.
ex : i have parameter (plant) on the selection screen, based on the plant entered by user i need to display the F4 help for the another parameter(MRP controller).
if the user enters plant 3218 then when requests for F4 help for the parameter MRP controller, then controller values related to that plant need to be displayed as F4 help.
i had done everything explaned above, but one problem i am facing.
after entering the plant on the selection screen i need to press the enter key, then if i request for F4 for MRP controller then i am getting the apprpriate values.
after entering plant if i didnot use enter key and request for F4 help for MRP controller then it is displaying no values.

Hello Sippy
The ENTER causes the program flow to pass PAI followed by PBO of the selection-screen. This way the entered value becomes "known" to the report.
If you enter your plant, do NOT push ENTER and then call the next search help you have to read the entered value from the selection-screen yourself using fm DYNP_VALUES_READ.
For more details search the forums for this function module, e.g.:
[Regarding Custom F4 help|Regarding Custom F4 help;
Regards
Uwe

How to capture selection-screen values

Hi,
How to capture selection-screen values when user pressing F3 or Back button after the display of report.
Regards,
Bujji.

Hi Bujji,
select-option are actually ranges or more general internal tables with the structure:
SIGN:    'I'nclusive or 'E'xclusive
OPTION: 'EQ', 'BT', 'NE', 'GE', 'CP', ....
LOW:     low value of type of the curresponding "FOR table-field"
HIGH:     high value of type of the curresponding "FOR table-field"
You may just code:
TABLES: mara.
SELECT-OPTIONS s_matnr FOR mara-matnr.
LOOP AT s_matnr.
WRITE: / s_matnr-sign,
           s_matnr-option,
           s_matnr-low,
           s_matnr-high.
ENDLOOP.
If you find my answer useful, please don't forget the reward.
Regards,
Juergen

How to pass selection screen value to LDB dynamic field.

Hello everybody,
In my program, I am using standard LDB(PSJ) for getting data. And there is a requirement that I have to display some dynamic fields on my selection screen like plant , person responsible ( which are mandatory also ) etc. and inside the program I have to fill those dynamic fields for which the user has entered the value in selection screen.
Could you please tell me how to pass some of selection screen values to ldb dynamic fields before GET statement.
Thanks !!!
Regards,
Mitra

>
Pavan Bhamidipati wrote:
> Hi,
>
>
I have to fill those dynamic fields for which the user has entered the value in selection screen.
>
>
> This means that the user is going to enter the values in the selection screen for the dynamic field values so
>
> SET PARAMETERID 'XYZ' FIELD p_field.
>
> where p_field is a parameter on the selection screen
>
> Regards
> Pavan
You can capture the values selected through the dynamic selections using some of the functions modules below, just search the forum for the below FM's, perhaps you can find some sample code
FREE_SELECTIONS_EX_2_RANGE
FREE_SELECTIONS_EX_2_WHERE
FREE_SELECTIONS_RANGE_2_EX
FREE_SELECTIONS_RANGE_2_WHERE
FREE_SELECTIONS_WHERE_2_EX
FREE_SELECTIONS_WHERE_2_RANGE

At selection-screen value- help

Hi All,
I have a requirement that based on a radio button one at selection-screen value-help is triggered and on based on a different radio button another at selection-screen value-help should be triggered.
can it be achieved.
Regards,
Jeetu

AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
|   FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
      {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
    {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
      sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
    MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
    IF sy-ucomm = 'ONLI'.
      CALL SELECTION-SCREEN '0500'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
    IF s_conn IS INITIAL.
      MESSAGE 'Please enter values' TYPE 'W'.
    ELSE.
      SELECT *
             FROM sflight
             INTO TABLE sflight_tab
             WHERE carrid = p_carrid AND
                   connid IN s_conn.
      IF sy-subrc <> 0.
        MESSAGE 'No flights found' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.
Main program
START-OF-SELECTION.

Regarding selction screen values

Similar Messages

Maybe you are looking for