Regarding Server Settings

Hi All,
After making changes in BDC in DEV Server, I released the request.But, the problem is Data is coming correctly in our system. But, Data is not coming correctly at customer side.Server and client are same.How can i resolve this problem?Is there any settings problem.Points will be awarded.

Hi
Just ask your client to try with the same data as u have used.
if this is not solving the problem, then ask them to use the user-master settings as being used by you. This because, some fields like DATE and PRICE WITH DECIMALS etc will depent on the user-settings.....
For details on user master settings, just have a look at transaction SU3.
Hope this helps u in solving the problem
Regards

Similar Messages

Can you upgrade from 1.3.0.20 small ovf to 2.1 without migrating to a new server? It sounds like you can just adjust the server settings now.

Can you upgrade from 1.3.0.20 small ovf to 2.1 without migrating to a new server? It sounds like you can just adjust the server settings now. I am currently running 1.3.0.20 and I have enough to do with also needing to upgrade my wlc to 7.4.121.0 and getting the MSE up to 7.4.121.0 without having to stand up a new server if I don't have to. Please share any information you have in regards to your experience with coming from a version 1.2-1.3 small ovf and going to 2.1.
Thanks,
Andrew

You are better off standing up a new server. It's cleaner and safer..... you can always try to upgrade if you wish, but if things don't work out well, then you just wasted a lot of time. Snapshot the VM and export the floor plans, just in case. The ova is built around the DB size, so I don't know how well the DB will perform if you try to expand memory or drive space after an upgrade.
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

Server settings for nokia 5800 xpress music

hiii,
can anyone tell me wat are the server settings for updating nokia 5800 xpressmusic via phone itself. whenevr i try to update it, it just shows define server settings noe and thats it doesn't work,.. this is a big problem. can anyone help please..
regards amit

xsb91 wrote:
What WLAN Wizard?
If you want to connect to WLAN, just go to the connections in settings, and choose WLAN. Refresh the list and connect to any which is available. If you see none, you're in a wireless-free area.
Near enough what i posted mate, so why bother
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Trying to create an account on eprintcenter but it gives me an error regarding server problem

I am trying to create an account on eprintcenter since one month but it gives me an error regarding server problem
"Lo lamentamos. ¡Se acaba de producir un problema en nuestro servidor! Hemos registrado el problema y lo corregiremos en cuanto sea posible. Disculpe la molestia."
"Sorry. There is problem on our server. He have registered the problem and solve as soon as possible. Sorry for the inconvinience"
How can I use eprint service without a user?

What browser are you using to access the site? I would start by trying to access the site from another browser. If that is not an option, I would clear the viewing history, cookies and cache for that browser under the settings. Then I would reboot the computer too. I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

ICloud mail server settings

IMAP information:
For the incoming mail server I wish to add the server name: imap.mail.me.com but the field containts other information and the field is grey so I cannot edit the field.
Where do I find the original field so that I will be able to change the server name?
Thanks in advance for any support regarding this matter!

http://support.apple.com/kb/ht4864
iCloud: Mail server settings for email clients

Bt server settings - heelllllllllllpppppppppppp!!...

I have had a Samsung Galaxy Ace for a few days. In that time I have spent ages on BT site and my email site checking and rechecking incoming and outgoing server details - I have telephoned my internet provider - no help - and I finally found this forum that seems to know what it is talking about regarding setting up email to receive and send from mobiles - hoorray!!
Only thing is, I tried the different server settings that others found successful and have still failed to get emails to send! I have two email sites and one of them is now working as I downloaded an app from Samsung app store and can now receive and send but with BT I can receive emails but still not send. The message usually says 'unable to connect to server'. I have also tried the different variations on security choices. Please can someone give me the correct settings before I throw this phone at the wall!!!
Solved!
Go to Solution.

agp1954 wrote:
I have had a Samsung Galaxy Ace for a few days. In that time I have spent ages on BT site and my email site checking and rechecking incoming and outgoing server details - I have telephoned my internet provider - no help - and I finally found this forum that seems to know what it is talking about regarding setting up email to receive and send from mobiles - hoorray!!
Only thing is, I tried the different server settings that others found successful and have still failed to get emails to send! I have two email sites and one of them is now working as I downloaded an app from Samsung app store and can now receive and send but with BT I can receive emails but still not send. The message usually says 'unable to connect to server'. I have also tried the different variations on security choices. Please can someone give me the correct settings before I throw this phone at the wall!!!
Hi. Welcome to the forums.
Can you give some details of the settings you've already tried with to sending (smtp) ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

WCS Administration = Settings = Server Settings FTP/TFTP??

Hi everyone
I'm just configure a new WCS (7.0) system with two WLC.
Everything is working fine but I have one thing I'm not sure about the
"Server Settings" under Administration => Settings.
I can enable or disable FTP, TFTP, HTTP and HTTPS but I don't know
what happens if I disable these settings.
Has anybody some experience with that?
Thanks
Regards,
Pascal

John....
This is per Cisco:
Set Up NTP on the WCS
The WCS relies on Windows or Linux for the correct time. The WCS checks the Windows Operating System or the Linux Operating System once every 24 hours for the system time. Therefore, it does not immediately know about system time changes unless you stop and restart the WCS server. Right-click on the clock and select Adjust Date/Time. Use an NTP time source to set the clock and manually set the offset for your time zone. This is typically already set.

Mail, Snow Leopard and iCloud mail server settings

If I use the iCloud suggested settings as per:
ENTERING iCLOUD MAIL SERVER SETTINGS IN SNOW LEOPARD
as per Roger Wilmut's suggestions - http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html,
will all my other incoming and outgoing mail accounts still work as usual?
Thanks

Whatever you enter in your settings for your iCloud mail account, they will not affect any other mail account you have set up in your mail application.

Can't override DNS Server settings - can only append!

See this thread for a similar question:
http://discussions.apple.com/thread.jspa?messageID=3555096
I have also filed this with Apple (Problem ID 5159216). Here is the text of the report (with a few bits removed - not crucial to understanding the report).
If anyone has suggestions/clues to resolve, please advise. Thanks!
Summary:
This problem concerns AirPort Extreme (802.11n) at revision 7.1. I will summarize with a comparison between AirPort and MacOS X.
MacOS X and Airport Extreme (referred herein as "AE") both permit editing of DNS server settings whether in DHCP or Manual mode.
When MacOS X DNS server settings are set manually by the end-user, the new server IPs are used (good). When AE's DNS server settings are overridden by the end-user, the new server IPs are NOT used (not good)! Rather, the DHCP-supplied DNS server always pre-empts whatever is given in the AE Configuration UI.
Steps to Reproduce:
1. Using AirPort Extreme (802.11n) at revision 7.1 and MacOS 10.4.9 on a MacBook Pro (Core 2 Duo). The AE has been previously configured for IPv4 using DHCP and the MacBook is successfully connected and resolving domain names through the AE.
2. Visit "Apple Menu > Location > Network Settings" and check the AirPort TCP/IP settings. For purposes of this test, make sure the "DNS Servers" field is EMPTY so MacOS X defaults to the AE's DNS settings, then close System Preferences.
3. Run "AirPort Utility" (the newer version, not "Airport Admin Utility") and configure the AE under test. Pick the "Internet" icon in the toolbar and note the Internet Connection settings.
4. In this test, Configure IPv4 is set to "DHCP" and the DNS Server(s) field contains two DNS IPs assigned by the Internet Service Provider. In my case that's Cablevision's Optimum Online service. You may or may not see IP addresses here, but in my case they are visible.
5. As the DNS Server(s) are editable, and they both show ISP-supplied addresses, they can be changed to whatever alternate IPs you wish. For instance, change them to these alternate DNS IPs from OpenDNS.com: 208.67.222.222 and 208.67.220.220. (You could use any alternate set of IPs but for the purpose of this test use the OpenDNS IPs.) Update the AE and restart.
(For additional reference, http://www.opendns.com/start/airport.php shows instructions for the older AirPort Admin Utility, but the concept is exactly the same.)
6. Normally you shouldn't have to restart the MacBook Pro since we're just using the AE settings, but go ahead and do that just to be consistent with this test.
Expected Results:
Now for the moment of truth! We want to verify that we're using the OpenDNS IPs for our DNS Servers. One nice feature OpenDNS has is automagic redirection for certain domain name typos.
Here's an example. Drop to shell (Applications > Utilities > Terminal) and try this command (excluding the $ prompt, natch):
$ dig craigslist.og
The "og" typo is deliberate. We really want to go to craigslist.org. If you're using the new OpenDNS IPs, you will STILL get an Address (A) record with an IP like so:
;; ANSWER SECTION:
craigslist.og. 0 IN A 208.69.32.130
If you had entered "craigslist.og" in Safari, you would end up at 208.69.32.130 (an OpenDNS server) and then redirected to craigslist.org.
Actual Results:
Alas, that's not what happens! Instead, you get NO IP address, like so:
;; QUESTION SECTION:
;craigslist.og. IN A
This means we're not actually using the OpenDNS IPs. What's happening?
To find out, I spoke with the AirPort support group (Case # xxx-xxx-xx). I learned that, despite being allowed to edit and override the IP addresses provided via DHCP, the AE still uses the DHCP-provided DNS server if available.
Again, the user interface suggests that I'm allowed to override the DHCP-provided DNS IPs as shown in the UI. Even though I can do this, the AirPort will still keep note of any DHCP-provided DNS Server IPs and use those first.
True, I can switch to Manual network settings (and then my own DNS Server IPs take effect). Of course this is problematic when the ISP renews my IP address (which it does from time to time).
Another workaround is to use the "DNS Servers" settings noted in step 2 (above). However this is also problematic if I want to keep my network settings simple. It requires a "Home Network" location and an "Office" location. Still not preferable, but it's a workaround.
Regression:
n/a
Notes:
I would like AirPort's DNS settings to be overridden in the same way OS X allows DNS settings to be overridden. The user interfaces suggest this is possible but it is not. It's only possible in the OS X case. Having the same flexibility on the AirPort would be most welcome.

Afraid of the answer...sheesh...you must be a child. This has nothing to do with masquerading anything. The issue being discussed here is that people want to manually assign a dns server address via the new AEBS, while maintaining DHCP for IP address assignments through their ISP. For example, I would like to have opendns.com take care of all dns addressing at the router level, even though I have "Configure IPv4" set to "Using DHCP". If you do not understand why one would want to use something like opendns.com, please visit their website and enlighten yourself. The fact that the dns server address fields are editable when set to "Using DHCP" leads one to believe that you can manually assign a dns server in this configuration; however, under firmware 7.1.1, you still cannot. The previous iteration of the airport hardware can do it, as can nearly any router you pull off the shelf. In addition, this is something that can easily be done at the individual-computer level in OS X; however, many people would prefer to administer their network at the router level. That is the issue being discussed here. Either you can't read or you are purposely derailing the thread.
iMac 24" Mac OS X (10.4.9)

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

I changed ISPs and had to change the server settings. Now one of my two email addresses crashes every time I try to read the emails.

At first Thunderbird downloaded every email from the problem account going back to 2011. I changed the server settings to only download emails from the last 15 days and to delete any messages older than 15 days.
I can send emails from this account and my other email account works fine for sending and reading mail. However, this problem account crashes Thunderbird every time I try to read the messages. There are now only 300 messages in the inbox and I've been able to have them marked as read. But I still can't read any of them.
What's the fix on this?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

Doubt regarding ALE SETTINGS in IDOC scenario.

Hi Friends,
        I have some doubts regarding ALE settings for IDOC scenarios, can anyone please clarify my doubts.
For exmaple take IDOC to FILE scenario
The knowledge i got from SDN is --
One need to do at the R3 side is --- RFC DESTINATION (SM59) for the XI system.
                                                   --- TRFC PORT for sending IDOC to the XI system
                                                   --- CREATING LOGICAL SYSTEM
                                                   --- CREATING PARTNER PROFILE
               at the XI side is --- RFC Destination ( For SAP sender system)
                                       --- CREATING PORT for receiving IDOC from the SAP sending system(IDX1).
1. Do we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself or in XI system or in both systems we create these logical systems? Is this a mandatory step in doing ALE configurations?
In IDOC to IDOC scenario-------
2. Do we craete two RFC destinations in XI system? One RFC DESTINATION for the Sender R3 system and another RFC DESTINATION for the Receiver R3 System? and do we create RFC DESTINATION for the XI system in receiver R3 system? If not.....y we don't create like this........Please give me some clarity on this.............
3. If we use IDOC adapter ,since IDOC adapter resides on the ABAP STACK ,we don't need sender communication channel ,for the similar reason----
y we r creating receiver communication channel in the case of FILE to IDOC scenario?
4. Can any one please provide me the ALE settings for IDOC to FILE scenario,
                                                                                FILE to IDOC scenario,
IDOC to IDOC scenario individually.
Thanks in advance.
Regards,
Ramana.

hi,
1. Yes, we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself and
it is a mandatory step in doing ALE configurations
2. We create 1 RFC destination each in R3 and XI.
    R3 RFC destination points to Xi and
    XI RFC destination points to R3
3 We need to create Communication Channel for Idoc receiver as the receiver channel is always required but sender may not be necessary
4. ALE settings for all IDOC scenarios are same as follows....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful
Prashant

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen

Regarding Server Settings

Similar Messages

Maybe you are looking for