Regarding short dump ASSERTION_FAILED
Hi
I tried to delete info object characteristcs from Info object from transaction RSA1. it gives short dump.
pls advice how to avoid this.
"ASSERTION_FAILED" " "
"CL_RSAWBN_OBJ_IOBC_IOBJTREE===CP" or "CL_RSAWBN_OBJ_IOBC_IOBJTREE===CM002"
"GET_IOBC"
Termination occurred in the ABAP program "CL_RSAWBN_OBJ_IOBC_IOBJTREE===CP" -
in "GET_IOBC".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 34
of the (Include) program "CL_RSAWBN_OBJ_IOBC_IOBJTREE===CM002".
is it patch problem ?
Regards
Chandra
HI,
Did you saw this?
http://wiki.sdn.sap.com/wiki/display/BI/RuntimeErrorASSERTION_FAILEDinABAPProgramCL_RSAWBN_TREE_VIEW
Regards
Lucas
Similar Messages
-
Short Dump 'ASSERTION_FAILED' during updating partner Functions
Hi All,
I am updating the Partner Functions for the Customers using FM 'SD_CUSTOMER_MAINTAIN_ALL' and passing the partner functions and numbers to the XKNVP structure.
while running the program in am getting the short dump as ASSERTION_FAILED.
Detailed Description:
In the running application program, the ASSERT statement recognized a situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort" for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
The Dump is occuring in the method 'get_cvic_cust_to_bp1_line'.
We have searched for a relevant SAP note but could not find any.
can any one please help to solve this issue?
Helpful answer will surely be rewarded.
Thanks in Advance,
Asif Ali KhanWhen you are (absolutely) sure you are using this function module in the correct way, only then opening a message for SAP is liable. However, most of the times this happens because not all (or all) parameters are not provided for the FM to work properly, or what ever reason that may be.
It might be helpful to determine the checkpoint group and have a look at the log in transaction SAAB. This might give you a clue as to where the problems lies. -
Hi
The runtime error is DBIF_RSQL_INVALID_RSQL and the exception is CX_SY_OPEN_SQL_DB.can anyone explain me these errors.
At this select query it going to short dump.Could anyone help me.Its urgent.
Select aaufnr agstrp agsuzp biedd b~iedz into table i_uncount
from afko as a inner join afru as b on aaufnr = baufnr
for all entries in i_ordscp
where aaufnr = i_ordscp-aufnr and bgrund = 'ONS'
and b~stzhl = '0000000'.
Error Analysis:
The data read during a SELECT access could not be inserted into the target field.
Either the conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
The target field is all correct.I've checked it.
Could anyone please help me.Its really urgent.U'll definitely be given points.
Thanks
chandrika.Hi Sarath ,
Please look at the internal table decleration and the sequence of fields in select statement .
What is happening is that the select is tying to place the value of iedd into aufpl as a result of which this incompatibilty occurs.
So you can either user into corresponding-fields or modify the sequence of your internal table.
I would sugges the second option , as first can effect the performance.
So just declare the it as
TYPES:BEGIN OF t_uncont,
aufnr like afko-aufnr,
gstrp like afko-gstrp,
gsuzp like afko-gsuzp,
iedd like afru-iedd,
iedz like afru-iedz,
aufpl like afko-aufpl,
END OF t_uncont.
Regards
Arun -
Hi all,
whenever im trying to load the data it gives me the shortdump error
plzz sugest wat 2 do
regardsHi Akhilesh,
Try the below steps to sort out the short dump,
1. Goto Monitor --> Status Tab --> using wizard or menu path
--> Environment --> Short dump --> warehouse
2. Select the Error and double clk
Analyze the error message.
3. -->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
4. Refresh the Transactional RFC screen and go to the Data Target which failed and see the status of the Request -->Chk for it to be green.
5. If it does not work there may be bad request if it is that case go to the Data Targets and delete the bad requests and do the update again.
Regards,
Mani -
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
Regarding short dump in program SAPLCNDP with Raise_Exception
Hi all,
I am getting short dump "RAISE_EXCEPTION" in my system .
Exception condition "CNTL_ERROR" raised.
A RAISE statement in the program "SAPLCNDP " raised the exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLCNDP " in
"DP_SYNC_URLS".
The main program was "SAPLSMTR_NAVIGATION ".
The termination occurred in line 31
of the source code of program "LCNDPU40 " (when calling the editor 310).
Needed reply urgently.
Thanks in Advance,
NagamaniIn the shortdump, look for the value of the feature on which the error occurred.. ie the variable FEATURE_ID & try if you can activate that feature using Tcode PE03.
~Suresh -
Need help regarding short dumps in BW
hi all,
We have a problem in our production.Thousands of short dumps have been created in a day stating
"Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB"
=====================
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
===================
The RSRV check shows "Inconsistency: High value for table /BIC/B0000xxx000: 0002 ; PARTNO value in RSTSODS: 010."
When a repair was run on this table the short dumps stopped.Is there any other steps that should be taken to avoid such dumps in future/is there something that we have missed to maintainin in BW.
Please explain in detail, it will be of great help.
ThanksHi All,
Thanks a lot for the valuable messages.
So when all these stated notes are followed, and if in future if a simillar problem comes, the recovery step would be running the RSRV test and repair on the particular object?
Thanks once again.
Shailaja -
Regarding Short dump while data extraction
Hi All,
We are trying to extract data from DB Connect. When we try to pull the data by giving selections, we are getting short dump.
Name of Run time error.
PERFORM_CONFLICT_TAB_TYPE
Exception Name
CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for this error.Hi Jayanth,
Check these ...
Perform_conflict_tab_type error
Oracle to BW Load Runtime error CX_SY_DYN_CALL_ILLEGAL_TYPE
Raja -
Regarding short dump while loading data
Hi All,
I am loading data using 0FI_GL_4. This is a periodic load which was working fine till March. There are lot of postings that happened in April and period was open till 20th. Now when I am trying to load that for 12th period April. I am getting the following error "ABAP/4 processor: DBIF_RSQL_SQL_ERROR" in short dump.
This is the error analysis:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSEG_CPUDT_DATA" "(FUNCTION)"
I am tried to load data 5 times till now and every time I am getting the same error. I checked with Basis people for the DB space and it is fine.
Why I am suddenly getting this error???Hi,
it looks like an internal table overflow in your source system.
Try reducing the data_package size of your load or ask your basis guys to have a look on short dump and perhaps increase this memory.
Try RSA3 in the source system and see if it works with your data_package size values from BW and see if it works. If not reduce the number of records...
On which plugin release is your system running?
hope this helps,
Oliviier. -
Please help me regarding short dump
iam in lm. one of my process chain getting this this short dumpDBIF_RSQL_SQL_ERROR erroor.Extraction completed but bw side it getting the error showing 0 from XXX redords iam getting this
thanks in advanceHi
You will get this type of Error when you are not having sufficient memory in the Production Server or the Utilization Space is more than 95% you will get the these type of Error
GO to DB02>Space Statistics> Daily > Weekly> Monthly
and also get ST 22 ABAP Dump Analysis if you are facing SOL trace error
you have to inform to the basis people he will check and he add the data file
if it is useful please assign some good points
regards
madan -
RSA1 - Datasources ASSERTION_FAILED short dump
Hello,
We are getting a short dump (ASSERTION_FAILED) when clicking on Datasources tab in RSA1 -> Modeling. This was working fine till yesterday afternoon. The last action I performed was to activate all transfer structures in My self source system using RS_TRANSU_ACTIVATE_ALL. I searched on service marketplace but couldn't find any note relevant to our error.
Everything else works fine. Please advise.
We are on BI SP14.
This is the log from st22.
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_RSAWBN_TREE_VIEW===========CP" or "CL_RSAWBN_TREE_VIEW===========CM00K"
"EXPAND_NODE"
Best Regards
RT
nullHello Voodi,
998730 talks about the short dump when changing/activating transformations.
We got the short dump when trying to get into Datasources tab. Though we are on BI, as i mentioned earlier the last action i performed was to activate transfer structures (For 3.x statistical datasources).
Still, I checked the table contents as mentioned in the note. It was not of much help. Any other thoughts?
Thanks.
Message was edited by:
SAPBI IP -
Hi Gurus,
When there is short dump is there a systematic procedure to solve the short dump apart from checking in ST22 so that we specify this short dump is error due to BAsis or due to BW .
Is there any thing that?
Please share some knowledge regarding short dumps?For sure its not always R/3 or its not always due to data.
BW: Dump due to Transformation code.
BAsis: Dump due to less table space.But having said its always hard for to identify if its due to table space or due to transformation so if you know how to identify them ,i would appreciate ur help -
ASSERTION_FAILED, Short dump when activating Transformation in BI7.0
Hi All,
I have migrated 3.5 update rule to 7.0. And during transformation activation i am getting short dump giving following messges:
"ASSERTION_FAILED"
"CL_RSTRAN_GEN_STEP= = = = = CP"
"CL_RSTRAN_GEN_STEP= = = = = CM005"
"GET_CONTAINER"
My system support pack is 15. I searched many OSS Notes but i am not able to get the exact soln.
can anybody help me out with this problem?
Regards,
Harshthis error is generally due to inconsistency in metadata
refer OSS note: 1071255, 1094266, 998730, 829353, 926854
Try to implement this solution from OSS 998730:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space' or 'S'
REF_RULE <> 'space'
If there are inconsistent entries in the RSTRANRULE table such as:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space or GROUPTYPE 'S'
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Edited by: sam hennry on Feb 5, 2008 4:40 PM -
ASSERTION_FAILED short dump when Transporting Transformation from Dev to QA
Hi Experts,
I' am getting a short Dump when transporting the transformations, DSO & DTPs from Dev server to QA.
I got RC=12, Please have a look below....
Transport log...
BCQ System BCQ
Selection for Import 08.07.2010 15:28:59 (0) Successfully Completed
Import 08.07.2010 15:35:14 (0) Successfully Completed
Check Versions 08.07.2010 15:35:14 (0) Successfully Completed
Method Execution 08.07.2010 15:36:20 (12) Canceled
Import 08.07.2010 15:45:39 (0) Successfully Completed
Check Versions 08.07.2010 15:45:39 (0) Successfully Completed
Method Execution 08.07.2010 15:46:45 (12) Canceled
and the Log detalis.....
Date Time Message
08.07.2010 15:35:15 Job started
08.07.2010 15:35:15 Step 001 started (program RDDEXECL, variant , user ID DDIC)
08.07.2010 15:35:15 All DB buffers of application server sxcat136 were synchronized
08.07.2010 15:35:21 STDO: Log could not be written on output device T
08.07.2010 15:35:30 Replication completed successfully
08.07.2010 15:35:31 Struttura di comunicazione /BIC/CS8ZFIZIASA activated
08.07.2010 15:35:40 Regola(e) di trasm. 8ZFIZIASA_AA activated
08.07.2010 15:35:47 ABAP/4 processor: ASSERTION_FAILED
08.07.2010 15:35:47 Job cancelled
Even I've checked the entries on the table RSTRANRULE for those Transpormations but there I got...all the entries with...
RULEID = all numbers
GROUPID = '1' or '2'
GROUPTYPE = 'S' or 'T'
REF_RULE ='0'
we are in to SAP_BW Release 700, Level 0013, SP -SAPKW70013, SAP NetWeaver BI 7.0
Pls help if any one know's the solution for this.
Thanks in adv.
BR,
Ajay Kumar
Edited by: sap.ajaykumar on Jul 9, 2010 12:48 PMFollow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Also check the oSS note : Note 975675 - Transformation cannot be activated -
Regarding 2LIS_03_BF short dump
Hi Friends
Kindly help me in this regard, I got below short dump while executing "2LIS_03_BF" in RSA3 extract checker.
We wrote the customer exit for this data source, I put the debug point in my routine, but it not stopped. hope this error occuring before the routine. Please let me know the procedure what I should do here
Short dump:
Runtime Error IMPORT_ALIGNMENT_MISMATCH
Exception CX_SY_IMPORT_MISMATCH_ERROR
Occurred on 31.07.2007 at 09:06:01
Error when importing object "MC03BF0_TAB".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR
was neither
caught nor passed along using a RAISING clause, in the procedure
"MCEX_BW_LO_API" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When importing object "MC03BF0_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 174.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
The exception must either be prevented, caught within the procedure
"MCEX_BW_LO_API"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
There is a probably a new version of the program which does not
match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the ABAP/4 Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"IMPORT_ALIGNMENT_MISMATCH" CX_SY_IMPORT_MISMATCH_ERRORC
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
Information on where terminated
The termination occurred in the ABAP program "SAPLMCEX" in "MCEX_BW_LO_API".
The main program was "RSFHGEN2 ".
The termination occurred in line 226 of the source code of the (Include)
program "LMCEXU06"
of the source code of program "LMCEXU06" (when calling the editor 2260).
Processing was terminated because the exception "CX_SY_IMPORT_MISMATCH_ERROR"
occurred in the
procedure "MCEX_BW_LO_API" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLMCEX ". Its source code starts in line 5
of the (Include) program "LMCEX$06 ".
Thank & Regards
lasyaHi Fiends
One more question regarding above problem?
will it be problem in my code which I wrote in Routine, let me know?
CASE i_datasource.
WHEN '2LIS_03_BF'.
PERFORM 2lis_03_bf_exit
TABLES c_t_data.
endcase.
FORM 2lis_03_bf_exit TABLES p_c_t_data STRUCTURE mc03bf0.
Endform.
Thanks & Regards
lasya
Maybe you are looking for
-
RAM is not showing up, is slot broken?
I have a macbook pro mid 2009 running Lion (upgraded twice). Right now, there are two sticks of 4gb RAM in the computer, however, if I go to about this mac, system profiler, or activity moniter, they all show that I have only 4gb, while I should have
-
Must restart after installing firefox and kde...WHY????
Every time I set up an arch box, when I install firefox or kde (probably others) I must restart the computer before I can even execute them. This is mighty inconvenient and un-linux-like, I noticed that during the bootup, the Updating Shared Library
-
TS3638 Sign in window does not appear in Mac App Store.
I have been trying to work this out for a week or so. I already tried verifying and repairing disk permissions, as well as deleting the com.apple.appstore.plist file. Whenever I click the sign-in button (featured page or purchases page) nothing happe
-
hi friends, Can any one explain about actual cost (EK01) and caliculated cost (EK02). where we can use these condition types EK01 and EK02. In which scenario we can use EK01 and which scenario we can use EK02. Explain about Actual cost and
-
Keeping two computers files in sync?
I have two MAC's and a family version of iLife '08. I would like to create a website using iWeb on one and have the ability to edit that site via ether of the two MAC's. Is there anyway to sync the files created by iWeb so I can edit on either comput