Regarding SNMP trap on Backup Unity connection failure

Hi,
if backup of Unity connection failed, would a backup failure produce an SNMP trap?
thanks,
Kamran

RTMT has alerts for DRF backup failures... and can be set to trigger emails, but I am not aware of any SNMP Traps generated by DRS Backup failing.
Kind regards,
Craig

Similar Messages

DRS Restore Backup Unity Connection 8.6 Fail Database Restore

Hi all
I'm trying to restore a backup from unity connection 8.6 to a fresh install platform but the database item fails every time at 50% or 60%, all the parameters, software version, and the license mac are the same, Any ideas what happened?
Thanks a lot.

One possible reason could be if there is a mismatch in the DNS config on the original cluster and the one on which the backup is being restored. Please ensure that DNS lookups are working on the new cluster. Else upload the DRS restore traces to see what could be going wrong.
HTH
Manish

Regarding SNMP Trap

Hi ,
After configuring and assigning Notification Rules to Notification Methods, we can successfully send a Test SNMP Trap to our Tivoli console, but "real" warnings and critical alerts are not getting through - have we missed any extra configuration step(s)?
with regards,
Dilip

Under Notification rules you need to add this extra "Advanced Notification Method".
So go to the notification rules, select each of the rules, click edit, click next, next, etc. on the 6th page you have the option to enable this new "Advanced Notification Method".
Once this is done and working, if you go the the db/host and click the alert, click the details you should see if firing off to this new advanced notification method.
For example we have:
1. E-mail sent to [email protected] (SYSMAN, Host Availability and Critical States)
2. The following notifications will be sent: 1 e-mail messages, 0 SNMP traps, 0 PL/SQL procedures, and 1 OS Commands.
3. Called /opt/app/oracle/oem10g_integration.sh (SYSMAN, Host Availability and Critical States)

2TB Iomega EZ Media and Backup NAS connection failure.

Hi,
Can someone please explain to me why my 2TB Iomega EZ Media and Backup with the newest firmware installed often suddenly cannot be approached anymore whatever I try. My desktop (W8.0) says “Cannot find networkpath “. Code: 0x80070035. IE. says “Cannot find server”. White and blue leds are on.
And after a few hours or sometimes days it reconnects again all by itself. What can I do, suggestions welcome.
Thanks,
Wil

Hi Andrew, Thank you for your response.
Does anybody else have access to the device that might be trying to log in? Have you enabled security on the device? If not, I would recommend enabling security and make sure that your device is secure by reading the following support article: Security Best Practices Guidelines
Nobody else has acces to the device. Security is enabled.
You might want to set up a static IP address as well: Configuring a static IP address
A static Ip address has been set up after installation, otherwise it won`t function.
If the problem persists, you can try to reset the network and user settings with the reset button on the back of the device. Press and hold the reset button for four seconds. Using the device reset button
This I will try.
OR
Reset the entire device using the Factory Reset from the web interface. This will erase all of your data, however.
This is only a last resort as the device is full with data.
You can also contact technical support to troubleshoot the issue further since you are still covered by the warranty.
This I will do if the problem persists.
Thanks a lot for your advice.
Wil

Unity IP Fax in Unity Connection

Hi Team,
we have recently migrated from Cisco Unity 4.0 to Unity Connection 8.6. What i found is Unity IP Fax is not supported in Unity Connection, is there any workaround for this?
Regards
MAC

The fax integration for Unity Connection requires a fax server.
Hailey

Connection between the CCMS sending a SNMP trap to the aplication NETIQ

Hello,
I have to configure a connection between the CCMS sending a SNMP trap to the aplication NETIQ.
Can someone help me? Is there a manual o tutorial to do this?
Best regards.
Pablo Mortera.

Thank you very much Todd.
But NETIQ needs some aditional information to know that is CCMS data from SAP that is receiving?
Is there a way to do a test before sending information?.
Best Regards.
Pablo Mortera.

Failure to upgrade Cisco Unity Connection 8.6.2 to 9.1.2

Hi everybody.
Has someone that can help me with follow problem?
I making a Cisco Unity Connection upgrade from version: 8.6.2.20000-76 to 9.1.2.10000-28. But unfortunately we can't sucessfull to make this process.
On the finish of this process, I can see this outup error:
11/23/2013 12:28:55 upgrade_manager.sh|Cleanup exiting - Cached Data: [Vendor= VMware, Inc.
HWModel=VMware
CPUCount=2
CPUType= Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
CPUSpeed=3300
MEMSize=6144
BIOSVer=PhoenixTechnologiesLTD 6.00 06/22/2012
ObjectId=1.3.6.1.4.1.9.1.1348
OSVersion=UCOS 5.0.0.0-2
SerialNumber= VMware-56 4d e0 4f 4d 85 87 7b-eb 22 0e 52 a7 73 1a 22
VendorOID=1.3.6.1.4.1.674]|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleaning up download...|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
11/23/2013 12:28:55 upgrade_install.sh|Removing /common/download/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Started auditd...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|IOWAIT monitor stopped|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|<LVL::Error>
11/23/2013 12:29:00 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 14477).|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 14477)|<LVL::Debug>
Best Regards,
Claudio Costa
A mensagem foi editada por: Claudio Costa

Tks Manish, I just perform a restart on the both nodes on my CUC cluster and after that I did can install this upgrade patch.
Also is very important install the upgrade patch on all servers of the cluster before perform a switch-version on the publisher and then on the others nodes.
Best Regards,
Claudio Costa

Prime Infrastructure 2.1 - Fan-Failure SNMP-Trap Issue

Hello,
I am facing the following Prime Infrastructure (v2.1) issue:
- A Fan-Failure SNMP-Trap from a Cisco 3650 switch doesn't appear on Prime, but a Link-Failure from the same switch does.
- The both events appears on Prime with Syslog.
- The command "snmp-server enable traps envmon fan shutdown supply temperature status" is set up.
- The switch is in "Managed" state in PI, I have checked the ACL at the "snmp-server community" command, it is okay.
- I have set up an SNMP-Trace for the switch on PI, but only "SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex" arrived. Please find the log below.
07/02/14 12:39:53.211 TRACE [presence-9] [] Adding attributes for object Fan3KStats[151206060_,1012]
07/02/14 12:39:53.211 TRACE [presence-9] [] Index name : fanIndex
07/02/14 12:39:53.211 TRACE [presence-9] [] Index Value : 1012
07/02/14 12:39:53.211 TRACE [presence-9] [] Device MIB table index: .1012
07/02/14 12:39:53.211 TRACE [presence-9] [] MIB table row index: .1012
07/02/14 12:39:53.211 TRACE [presence-9] []     OID for : fanIndex = 1.3.6.1.2.1.47.1.1.1.1.1.1012
07/02/14 12:39:53.211 TRACE [presence-9] []     OID for : fanOperStatus = 1.3.6.1.4.1.9.9.13.1.4.1.3.1012
07/02/14 12:39:53.211 TRACE [presence-9] [] Get fragment
07/02/14 12:39:53.211 TRACE [presence-9] [] Creating PDU: Get
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.2.1.47.1.1.1.1.1.1010
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.4.1.9.9.13.1.4.1.3.1010
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.2.1.47.1.1.1.1.1.1011
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.4.1.9.9.13.1.4.1.3.1011
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.2.1.47.1.1.1.1.1.1012
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.4.1.9.9.13.1.4.1.3.1012
07/02/14 12:39:53.218 TRACE [presence-9] [] Error Status: 0
07/02/14 12:39:53.218 TRACE [presence-9] [] Error index: 0
07/02/14 12:39:53.218 TRACE [presence-9] [] SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     Setting attribute: fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] []     SnmpInt Value : ?
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, storing result, class=com.cisco.server.managedobjects.bridge.Fan3KStats, attr=fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     Setting attribute: fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] []     SnmpInt Value : ?
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, storing result, class=com.cisco.server.managedobjects.bridge.Fan3KStats, attr=fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     Setting attribute: fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] []     SnmpInt Value : ?
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, storing result, class=com.cisco.server.managedobjects.bridge.Fan3KStats, attr=fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, assembling attributes
07/02/14 12:39:53.218 TRACE [presence-9] []     MIB lookup, OID for: powerSupplyIndex = 1.3.6.1.2.1.47.1.1.1.1.1
07/02/14 12:39:53.218 TRACE [presence-9] []     GetMultiAttributes needs class=com.cisco.server.managedobjects.bridge.PowerSupply3kStats, field=powerSupplyIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     MIB lookup, OID for: powerSupplyOperStatus = 1.3.6.1.4.1.9.9.13.1.5.1.3
07/02/14 12:39:53.218 TRACE [presence-9] []     GetMultiAttributes needs class=com.cisco.server.managedobjects.bridge.PowerSupply3kStats, field=powerSupplyOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes invoked
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes building OIDs for next PDU
07/02/14 12:39:53.218 TRACE [presence-9] [] Adding attributes for object PowerSupply3kStats[151206060_,1009]
- The switch sends the SNMP Trap, based on the followings:
Jul 7 13:38:30 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:30 UTC: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 1 removed
Jul 7 13:38:30 UTC: %PLATFORM_THERMAL-1-FRU_FAN_NOT_PRESENT: Switch 1: System fan 1 not present
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33202, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33203, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33204, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33205, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:45 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:51 UTC: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 1 inserted
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33206, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33207, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33208, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33209, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
It seems like PI and the switch doesn't understand each other concerning the fan...
Thanks for any ideas, comments and feedbacks,
Csaba

I have the very same problem.
The switch has a power supply error (one of the two is down). There is the syslog message in PI about it, but no event has created, so nor alarm is there as well.
When I check the status of the switch in the Device Work Center, and choose the Environment in Device Details I can see that PI has not realized the power supply error.
However when I click on the Sync for this very device the power supply status is updated, but still no event or alarm.
This is the case with the FANs as well.

Unity Connection 8.5.1 Backup was working before now it won't setup?

My Backups for my Unity Connection 8.5.1 have stopped working. I had set it up when I first installed both the CUCM and Unity Connection 8.5.1, then I had to make a change in the network addresses on the backup server. I was able to restart the backups on the CUCM no problem, however the Unity Connection server wont allow me to setup a new instance of the Backup Server. Before I even get started setting up with the device it says at the bottom of the screen :
The Backup Device which is associated with 1 or more schedule(s) cannot be deleted.
It will allow me to go through the entire process of setting things up but will fail every time. I have run traces on the network, and it never attempts to touch the SFTP server, Can someone shed some light on this?
Thanks, Mark

Hi Mark,
This particular error means that the Schedule has to be deleted before making changes to the backup device. You have to delete the schedule before trying to make IP address change on the existing backup device, or you could create a new backup device and schedule altogether.
Please rate useful posts.

3750 sw is not sending SSH login failure SNMP trap

Hi experts,
I want to make my switch send trap when failed SSH login is detected. I found the "login Enhancement" feature and enabled the trap and logging for the failed attempt.
3750# sh run | in login
aaa authentication login default local
login delay 1
login on-failure
3750# sh login
     A login delay of 1 seconds is applied.
     No Quiet-Mode access list has been configured.
     All failed login is logged and generate SNMP traps.
     Router NOT enabled to watch for login Attacks
Then I enabled all the traps except the one for the syslog (because I don't want all the log messages are sent as SNMP traps...)
(config)# snmp-server enable traps
(config)# no snmp-server enable traps syslog
(config)# snmp-server host 10.1.1.1 mysnmpkey
Now when I try to login with incorrect password I do see the log but I don't receive the trap...
Nov 23 12:39:27: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: admin] [Source: 10.1.1.1] [localport: 22] [Reason: Login Authentication Failed] at 12:39:27 EST Wed Nov 23 2011
Of course when I enable the "syslog" trap I see something but that's more just for this log message
Any idea why??
My 3750-24TS-E is running
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
Thanks!
Difan

Hey Smitesh thanks for the reply. However my switch doesn't support the aaa_server trap...
#snmp-server enable traps ?
auth-framework    Enable SNMP CISCO-AUTH-FRAMEWORK-MIB traps
bgp               Enable BGP traps
Mine is a 3750 switch. Is this command for routers?
Thanks,
Difan

ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

Hello All,
I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with IBM LOTUS Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC version is 8.x
I have attached the file that displays the error.
From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
"The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
where 10.0.0.152 is the IP-Address of my Unity Connection Server.
Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
A Quick Help will be much appreciated .......... :-)
Hasan Jafri

Hello Craig,
After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
But still I am NOT able to use Forward option to send the Voice Messages via VMN.
REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
This is error that I am getting
"Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
Its 7 MB Recording. I hope you can easily Download.
Also important point is that i don't see any previous error that was accuring during my earlier testing.
Thanks & Regards,
Hasan Jafri

SNMP Trap on AP Max associations reached

Hi all,
I want to be able to send snmp traps to my NMS alerting our NOC to when we reach our configured max-associations on an ap. We currently use both 1130 AG and 1140-2N in autonomous mode, no controller. I have found a debug command "debug dot11 station connection failure" and the output of a test AP shows us the fact that the maximum number was reached. I need to find if it is possible to trap on such information.
Any information on this would be greatly appreciated. Also please ask me for more information if you need...
Thanks,
Daniel

Daniel,
This is a shot in the dark, but try this configuration:
ap# snmp-server enable traps dot11-mibs
I'm curious about this one, too, so please let me know if this produces the information you're looking for.
Justin

SNMP traps to monitor the signal strength on wireless AP

What snmp notification type should I enable on wireless AP to monitor the signal strength of the connected devices to the AP. What is the associated MIB for this SNMP trap.

Hi karthikeya,
Here is the link which gives us the info regarding the available MIB for the respective Model..
http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=3469&PlatformSel=9&fsSel=1292
Please select the Device part number and then chose the MIB that you require.
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Installation CUCM 10.X & Unity Connection

Hello,
I have a question about the actual installation of both systems, so i'm not using a pre made file on the website of cisco which you convert to a floppy image.
When i installed CUCM, i made my lab switch the NTP server by giving it the following command:
- config#ntp master 1
The call manager saw all of this & the default gateway also and it al worked perfectly and the Call Manager installed. When i did the same installation for Cisco Unity it did not work, it would not reconise the NTP nor even the default gateway and the installation did not proceed. This strook me as very weird, as the installation of the call manager did succeed with no issues.
Rebooted the switch : Didn't work
Resetted it as NTP : Didn't work
Laptop as NTP: Didn't work (Registry in Windows 8), if someone knows a decent program it would be a plus
Cisco Unity Connection wasn't even able to contact the default gateway of the vlan, it was 1 switch. The vlan had an SVI and IP routing was enabled.
Does anyone have any suggestions to these kinds of problems, which approaches did work?
Kind Regards,

Hi,
So yes the virtual machines had the same network settings and were in the same IP subnet aswell.
In ESXi i configured both the network cards, 1 active & 1 backup so i didn't need to create a port channel. I put up 2 VLAN's one for the management of the ESXi and one for the UC applications, so tagging was enabled.
My switch configuration was extremely basic
Just 2 vlan's 100 for data & 200 for voice, this resembles the environment it will be later installed.
The vlan's were SVI's and ip routing was enabled, i was able to ping from one vlan to another.
It had the command:
NTP Master 1
I knew it worked because i forgot during the installation to correct the clock, it was still 1993 and i had an issue with uploading the licenses, i resolved this.
So call manager was getting all of the NTP information
But during the Unity installation it all didn't work/respond, still very weird. The ports to the ESXI were configured as Trunk

Unity Connection 8.6 Mailbox Store Issue

Hi,
I am seeing an alert in Unity Connection Mailbox Stores that" This mailbox store is at or over 90% of its capacity ".
Also i have set the Aging Policies, but still no results. Anyways to reduce the size by deleting any other unwanted files.
Pls suggest.

Hello Jagadish,
In regards to this warning message you can also reference:
https://supportforums.cisco.com/thread/2241790
If your aging policy is "not working" it may be due to the fact it is not working retroactive, meaning that it is not purging old messages.
For best practices it would be best to create another Mailbox Store rather than increasing the size of the current one due to the fact that backups might fail due to the size.
Best regards,
David Rojas Peck.

Regarding SNMP trap on Backup Unity connection failure

Similar Messages

Maybe you are looking for