Regarding social networking services like gtalk an...

hi ,
i was also unable to find out gtalk and yahoo messenger in nokia C6 but Your brouchere mention that these social networking messengers are available in nokia c6?

Ditto here. I'm in India on C5 but the chat application from nokia doesen't let me connect
to any community other than ovi chat (no yahoo msngr/no gtalk).
The nokia messaging website and C5's pages on nokia.co.in all claim that support for
gtalk/yahoo msngr is provided with C5. Even the shop where I bought it said so.
But the fineprint in nokia's chat manual says the 'other communities' may be a premium
service in some regions.
I'm not the only one unhappy that advertisements don't match the reality :-(

Similar Messages

  • I am connected to wifi, i can surf the net using the browser but i can't open social networking apps

    whenever i am connected to wifi and then open social networking apps like facebook it always says that i am currently on a service plan that does not support this application, please connect to a wifi network or contact your service provider to upgrade your data plan...what can i do regarding this?whenever this occurs, i have to turn my phone off and turn it on to connect in a wifi...please help

    Duplicate:
    http://supportforums.blackberry.com/t5/Downloaded-applications-for/cannot-detect-wifi-for-applicatio...
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can i get a social networking plan with an iphone?

    i have the choice to get a new phone, iphone or blackberry. but i want twitter and facebook when i am not in a wifi area.
    can i get a social networking plan like i canw ith a blackberry?

    I live in New Zealand, so don't know.... but
    Data plans (and a social networking plan is essentially a data plan limited to a few services) are run by phone networks, not handset manufacturers.
    So there is no reason that there would not be a data plan, or social network plan that could be available.
    My phone company gives free data to facebook, so it may be possible.
    You shoudl contact the phone company who sells the iPhone.
    Or buy an unlocked iPhone (not sure if you can in Canada, here we can), and then choose a phone company seperatly.
    This is what I did.

  • Share Image,Link and Text to Social Networking App from My Windows Phone App

    Hi,
    I am developing windows phone 8.1 silverlight app where I want to share Images,Links and text to Social Networking App Like Facebook,Twitter,Whatsapp and Instragram.
    In Share content contains A Image of App Icon, A Link of App website and I invitation Text.
    There are Five buttons
    Share by Email
    Share by Facebook
    Share by Twitter
    Share by Whatsapp
    Share by Instragram
    Problems which I faced
    I can not attached image to Email. How it is Possible.?
    I can only open whatsapp from my App. But can not share to this
    I have used Share task but in list of app there is no whatsapp and instragram app ( I know there is no official app for instragram but it is Instragram Beta app)
    Please guide me how can I share my content to all above app

    Please see this sample application:
    https://code.msdn.microsoft.com/windowsapps/Sharing-Content-Source-App-d9bffd84
    You cannot control what appears in the share UI.  The Share UI Will show all applications that have registered to receive the type of content you are sharing.  So if a particular application is not appearing, then it is not registered as a Share
    target for that content type.
    I would run the sample on your phone for the various content types.  it should give you a good idea of which apps are registered for which content type.
    Bret Bentzinger (MSFT) @awehellyeah

  • Social networking in dreamweaver

    Hello all. I want to create a social network page like
    myspace & facebook for my company's website. Does Adobe have
    any such software or can anyone recommend one that they have used.
    (CS3)
    Thanks
    Why_atl

    "Dooza" <[email protected]> wrote in message
    news:g8jd46$ab6$[email protected]..
    > Why_ATL wrote:
    >> Hello all. I want to create a social network page
    like myspace &
    >> facebook for my company's website. Does Adobe have
    any such software or
    >> can anyone recommend one that they have used. (CS3)
    >
    > Its not something Dreamweaver can do for you. You need
    advanced server
    > side programming skills and database skills and security
    skills to even
    > consider taking on a project like this. You will also
    need a large time
    > frame to develop and test it.
    Definitely a very large project which normally would be
    handled by a team of
    experienced programmers.
    Patty Ayers | www.WebDevBiz.com
    Free Articles on the Business of Web Development
    Web Design Contract, Estimate Request Form, Estimate
    Worksheet

  • Social networking applications

    Hi,
    What do you use for social networking sites like facebook, twitter. I tried snaptu. But it says "connecting..." message for ever. It does work some times but not all the times.
    Appreciate for any apps for socialnetworking sites.
    Thanks,
    Chinni

    Thanks for reply. Is it possible to know which company developed particular application?  Some times I am having problem to trust application. I am more comfortable if I know who developed particular applicaiton.
    When I go to Settings->application manager->Installed apps, I see facebook and  facebook installer. It shows version but not who developed it.

  • Social network status app

    Hi, I was wondering if anyone can help me. I'm look for an app on the iPhone where I could update my social network 'status', and have it update on all my social networking sites like facebook, myspace, twitter etc...
    Does anyone know if there is anything like this availible? Just with no cut n paste this can get very tedious
    Thanks!!

    try Pinger Phone. It may not have all the functionality that you are looking for, but it should be better than having 3 different Apps for all those programs.

  • Where can I give feedback regarding Aperture? I'd love to see the ability to removes EXIF data when exporting, especially to social networks.

    Where can I give feedback regarding Aperture?
    I'd love to see the ability to removes EXIF data when exporting, especially to social networks.

    Robert,
    For any normal Export, simply cilick the list of option and further click on Edit.  There deselect to include Metadata, and there will be no EXIF data exported.  But no copyright info either.
    The option already exists to do what you want.  Once a normal Export has deselected that, I believe even exports via plugin for say FB will not have it either.  I tested with an export to SmugMug after deselecting in an earlier ordinary export, and EXIF info was not transmitted.
    Ernie

  • SharePoint adding, then removing Network Service to local groups

    After upgrading our two server farm to SharePoint 2010, SP2, April 2014 CU, we've noticed activity in our event log when the Timer Service restarts daily and when FIM syncs run.  It looks like SharePoint is adding the Network Service account to
    the local groups IIS_IUSRS and WSS_WPG, then removing it a little later on.
    Does anyone know why this happens?  Is it expected activity or a bug with the version we are running?
    Thanks in advance for your time- Rob

    Hi Rob,
    According to your description, my understanding is that you want to know why SharePoint adds and removes the Network Service account to local groups.
    Per the thread below, it seems like it is an internal SharePoint process and SharePoint adds this user as a test to validate whether it has the rights necessary to add users to local groups.
    More reference:
    http://social.technet.microsoft.com/Forums/en-US/1d451db9-fc73-4b1a-a532-7e89be2888ee/sharepoint-automatically-adding-network-service-account-to-the-iisusers-group?forum=sharepointadminprevious
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Social networking share widgets for iWeb... any solutions?

    I've been trying in vain for sometime to get one of the social networking share widgets (ShareThis, AddThis, TellaFriend) to work in iWeb 08 and am hoping someone might be able to help.
    With all i am pasting the code provided by these services into the HTML Snippet box. I am using the popup functions, since without doing so requires the HTML Snippet box to be resized unacceptably large obscuring other links on the page. The widgets are published fine, however the link they provide when posting to social networking site or included in an email add an additional extension on the URL that just links to an image of the widget. (i.e. http://web.me.com/fknott/CrystalCove_Properties_2//Home_files/widget1markup.html) the URL should end Home.html.
    Does anyone know how to fix this? the tech folks at each of these sites have been no help at all. Are there any other share widgets aside from these that will work seemlessly with iWeb?
    I really appreciate any help.
    Thank you,
    Troy

    Hello Marc,
    The code generated by ShareThis will not work with iWeb/insert HTML snippet.
    You'll have to put it inside the body tags of every HTML page at the location where you want it to show.
    Attention : the code is inserted after publishing = outside iWeb ! Every time you change a page in iWeb and publish it, you'll need to enter the code again.
    To automate this process you can use [TextWrangler|http://www.barebones.com/products/TextWrangler>
    _ in iWeb on every page you want ShareThis, create a new textbox and add something that is unique and easy to find afterwards when the page is published as a HTML page : ex. AAAAAA,
    _ move the textbox to the location where you want it to show, resize if needed,
    _ publish your website with iWeb,
    _ mount your iDisk in the Finder,
    _ open TextWrangler and the first thing you do is "start recording",
    _ open the first HTML file you see in your Site, ex. index.html (It's OK if that page doesn't have the AAAAAA) +(when you have the ShareThis on a specific Site or Blog only, locate that folder),
    _ in the Search field enter AAAAAA,
    _ in the Replace fiel enter the code provided by ShareThis,
    _ do a "replace in all files in this folder" where you select your Site or Blog folder,
    _ stop recording and save the script for later,
    _ unmount iDisk from the finder.
    Done.
    On my Blog entry about [Favicons|http://www.site49.eu/Leo/Tips4Mac/Entries/2009/2/15_Favicons.html|Add favicons to iWeb websites] you can find some screenshots on how to use TextWrangler as an automated search and mass replace tool.
    Kind regards,
    Leo

  • Apple's Social Network?

    Hello again,
    I am looking to leave Facebook, especially since it will be owned by or already is owned by microsoft. I am interested in locating Apple's own Social Network, I am aware of our very own "Ping" for music.
    Thank you again for any assistance in this area.
    Mohegan

    Thank you everyone for responding. To clarify my recent comment about Microsoft taking over or possible buying out Facebook or even helping FB. I read so many articles and misspoke myself and here is one article I read about this.
    http://www.zdnet.com/search?q=facebook+being+sued+
    I will clarify next time, for this is how I would like it to be, however I am still in favor of an Apple Social Network and will support any effort in this regard...
    Mohegan

  • Block or Quarantine e-mail from Social Networks

    Is there some option how can I block all e-mail messages from all knows Social Networks (facebook, google+, infoaxe, myspace...)
    Or at least all auto sended e-mail like
    Is [email protected] you friend...
    or
    [email protected] has indicated you're a frined. Accept?
    and so on
    I lower spam filter on Suspected Spam score 40 and it doesent catch them.
    How to block this kind of SPAM messages?
    Also how to block low volume SPAM messages from gmail that are selling things and self promotions?

    Hello Juraj,
    Have you tried to enable marketing mail?
    Marketing Email is a mode of promoting products and services via Email. Even though marketing messages are not considered spam, your organization or end-users may not want to receive them. Marketing messages are messages that are NOT Spam, do NOT contain Email transactions and does NOT reflect communication between parties. Example of a Marketing message is an Airline promoting their products and services via an Email but an Airline confirmation email to a user is not a marketing message.
    What is Marketing Detection and How it works?
    In AsyncOS 7.0.x for Email and above Cisco IronPort has introduced a new feature Unwanted Marketing Message Detection. When enabled along with IronPort Anti-Spam or IronPort Intelligent Multi-Scan this feature can distinguish between Spam and Unwanted Marketing Messages. Like spam, you have the option to deliver, drop or bounce unwanted marketing messages. You also have the option to tag unwanted marketing messages by adding text to the message’s subject to identify it as marketing.
    The Unwanted Marketing Message Detection feature in AsyncOS for Email can be configured via Per Recipient Policies for Anti-Spam. The Marketing Detection feature like Anti-Spam configuration allows you to drop, deliver or bounce after a message is detected as Marketing Email. For better detection and low False Positive rate it is highly recommended to use the "Tag and Deliver" action after a message is detected as Marketing Email by IronPort Anti-Spam or IronPort Intelligent Multi-Scan.
    Cisco IronPort highly recommends customers to take advantage of this new Marketing Detection feature to detect Unwanted Marketing Email and enhance the end user Email experience.
    How do you enable it?
        Go to Mail Policies -> Incoming Mail Policies
        Select the link under Anti-Spam for your Default mail policy
        Under 'Marketing Email Settings' select 'Yes' for 'Enable Marketing Email Scanning'
        Select the desired action under 'Apply This Action to Message'
        Submit your changes
        Repeat steps 2 to 5 for any other applicable mail policies.
        Commit your changes.

  • Navigation/BBM/Social network/ problem - How to contact BB ?

    Hey everyone,
    I have a BB curve 3G bought in France, but unlocked by my telephone operator there.
    I moved to Canada and get a internet cell phone plan (with Fido) but it seems that it doesn't work here... :-( I can call, send text message, but navigating, BBM or social networking don't work.
    They told me my french phone doesn't  "take care" the Fido network...
    Anyways, they asked me to contact blackberry for a reboot or something like that.
    The thing is I can't find a phone number or an email adress to contact technical support !
    If anyone experienced the same problem than I or knows how to contact BB, please let me know !
    Thanks for your help !

    Hello and Welcome to the Forums!
    Front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
    What you are attempting is actually a rather complicated thing. But, if you desire to ask other users for specific assistance about how to get the most use out of your BB, then this forum would indeed be the correct place for that.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Network service in solaris

    Am new to solaris and so I could not find a way to restart network service in solaris. Like in Linux u can use service network restart, similarly how do we restart the network in Solaris. I changed the route of the server and want the change to reflect without a server restart. Please help....I googled and came up with nothing regarding this...
    Edited by: rcmrulzz on Apr 17, 2008 2:52 AM

    I'm guessing that you update /etc/defaultrouter ?
    then, to restart network:
    svcadm restart svc:/milestone/network:default
    To get system to reread network config files:
    svcadm refresh svc:/milestone/network:default
    HTH
    John

  • [EXPLAINED] systemd wireless network service explanation

    In times before systemd was mandatory i was using a simple script to connect to internet via wireless upon boot that set up wlan0, associated it with wireless and when that was done did dhcpcd to get ip. When systemd kicked in i did a bit of a kludge to emulate rc.local. Today i decided to clean that mess up and to make a native systemd service. I found the folowing network.service on arch wiki.
    [Unit]
    Description=Network Connectivity
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-wlan0.device
    After=sys-subsystem-net-devices-wlan0.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    ExecStart=/sbin/ip link set dev wlan0 up
    ExecStart=/usr/sbin/wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf
    ExecStart=/sbin/dhcpcd wlan0
    [Install]
    WantedBy=multi-user.target
    This works perfectly. Now if someone is so nice to explain to me what happens here. Mainly where does it say that wpa_supplicant must be associated before dhcpcd starts? What exactly is network.target and what happens with this service when i suspend the computer?
    Best regards.
    Last edited by rokowsky (2013-03-29 12:12:09)

    Ok i'm sorry, now i see that network.target is under Before not After, which only means that this service delays netvork.target so that other units know when the network is up. This file actually defines what network.target means if i'm seeing this right. I have only one question, wpa_supplicant is started in background so that dhcpcd should start right after wpa_supplicant, perhaps before we are associated with a wireless network. In a script one would put something like "sleep 5" between them or pipe wpa_supplicant output to a file and check that file if we are associated and than start dhcpcd. Why does this service work?

Maybe you are looking for