Regarding Solman7.1 message type

Hi, Expert
We've build Solman7.1, but we will needed to change the existing message type in solman
to old message type SLFN.
If that is possible, could you kindly provide the step by step guide ?
Thank you !

Hi Takashi,
Yes instead of SIVA ..the standard delivered transaction type for VAR is SMIV in 7.1
please create a copy of SMIV to ZMIV or YMIV and then customize as per your requirement.
I would also recommend you to attend one EGI for this if possible. The EGI for this is really good and covers almost all the important queries w.r.t to this. Search SMP for EGI calendar.
In addtion, there is a new concept of business roles and sap delivered some out of box like SOLMANPRO and SOLMANREQU etc
kindly check my below blogs which might help you to customize/configure the interface as well.
Quick Tip : Customizing Business Role in Solution Manager 7.1 ITSM Part 1
Quick Tip : Customizing Business Role in Solution Manager 7.1 ITSM Part 2
hope this resolves ur doubt...All the best
Regards
Prakhar

Similar Messages

Regarding WHSORD message type in IDOC

Hi ALL,
Please let me know the following things if any one work on IDoc - DELVRY03 and Message Type - WHSORD.
Requirement is when you create a Outbound delivery in SAP if the delivery type is 'NL', Idoc has to create.
1) What are the Process code and message type ( In NACE, we called as output type ) for WHSORD in Partner profiles ( WE20 ).
2) At the time of creating deliveries in SAP, i have to check few conditions, if those are success then only i have to create IDOC else cancel the creation of IDoc. For this requirement what is the procedure.
3) Based on user requirements i have to change the 'Plant' ( E1EDL24-werks ) for this where i have to write the logic, means if it has to done throught user-exit please let me know the user-exit name.
Thanks & Regards
K. Naveen Kumar

Hi Naveen,
1) You can all the Process codes in WE42
2) You can do checks in BD64 (Filed level filtering)
3) you can write the conversion rules using BD55,BD79.
( else userexit)
Thanks
Eswar

Regarding the Message Type and IDOCS related to IS-Banking

Hi Gurus,
can any one provide me the Message Type and IDOCs related to IS-Banking.
Regards.
Kiran kumar.

Hi,
Refer this link,
http://www.stylusstudio.com/edifact/d04b/BANSTA.htm
Hope it helps you.

Reg Custom GR message type

This is regarding GR Message Type WE03
As part of Global template GR form for message we03 is already exists ..
we need to develop new form for current roll-out , initially we decided to have a our own GR custon message for this purpose
But when i see standard condition record combination for this message is Trans./Event Type-Print version-Print item, this combination will not allow us to have our own custom GR message ..
Is there any way to set up such away that for the specific plant or Purchase org this custom message is triggered?

>
sasibhushan334 wrote:
> Since both custom and standard message condition record exists in production system [We03 - Global Template, ZE03 - new custom message]
>
> u will end up having both messages in material document. this is what i am worrying more.
Its our requirement to have 2 messages printed right? So in your case, you attach normal report to WE01 and attach then new report to WE03, this way whenever users want normal report print, they just pull it with material document No. and if new report is required, they pull the material document by adding WE03 in output type.

Difference between message type and idoc type

Hi
difference between message type and idoc type
Regards
Rama

Hi,
Message Type:
A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterises the data sent across systems and relates to the structure of the data called an IDOC type.
Diff. with IDOC type
An IDoc type specifies the structure of the data.
A message type specifies the meaning of the data
Diff. b/w IDOC type and IDOC
An IDoc type is the definition of a specific data structure.
An IDoc is an actual instance of data based on an IDoc type. Therefore, there can be many IDocs created from a single IDoc type.
Example:
MATMAS is the message type and MATMAS05 is IDoc type for Material Master.
Thanks,
Shankar

Message Type inconsistent for Master Data Deltas

Hi All,
I have a question regarding the message types for the master data deltas. What I noticed on our server was that the message types (TCODE: BD52) is different for different severs for the same master data deltas (mostly they would begin with RS. If you do a wild card search RS*, you would find them for the different master data delta enabled extractors). Is this standard or is there something that we can do about it? I only ask because we modified the message types for one of the extractors to create a delta for the enhanced field on our extractor. This was done to create a delta when the enhanced field changes when nothing else changes on our standard extractor.
Please advise. Also let me know if you want me to clarify something above.
Regards,
Ashmith Roy

RSnnnn message type is created/assigned(in the source system) first time you initialize the delta for the master data. Hence it is normal to have different no assigned to different master data depending on when the particular master data was init (on that system).
When you say you enhanced the message type, what did you do?

Regarding Purchase order message Type

Hi
I am maintain purchase order type through MN04.
Now i want to message type with all condition which is maintained through MN04.
Is there these entries are stored in any tables?
If yes can any one provide me table name.
Thanks
DD

Hi,
Please check with acess sequence assigned to the output type, if the combination Purch. Organization and Vendor click F1 and find the table each access sequence assigned to the output type will define a new table
For example:
table -B025-Purchasing Output Determination: Doc.Type/Purch.Org/Vendor
          B026-Purchasing Output Determination: Document Type
          B987-Output Determination Training: EKO
           B027- Purchasing Output Determination: Purch. Org./Vendor for EDI
You can use like this
Regards,
Pramod

Regarding mandatory fields, Context Objects and Fault Message Types

Hi All,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
2) What is the purpose of Context Object and in which situation we will use this.
3) What is the purpose of Fault Message Types and in which situation we will use this.
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
Kindly look into the above points and respond point by point.
Thanks in advance.
Regards,
Prem.S

Hi prem,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
give occurence 1..unbounded. for the field name.
2) What is the purpose of Context Object and in which situation we will use this.
If u have multiple receiver system then to determine the reciever u can use context object.....
the alternative of context objetc is X-Path...
Check out these
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Here is a scenario where context objects were used for BPM
Technical Context Object in ccBPM
Get the details here:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
Technical Context Objects :
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
A list of the Technical Context Objects names can be found here:
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm
Difference between context object and x-path:
diff between context object and x path
3) What is the purpose of Fault Message Types and in which situation we will use this
whenever u want to catch some exception u can use fault message types.Just for a example u r sending some data to SAP system.But due to some reason the R/3 system is down.so in this case if u have implemented fault message ..u can get a error message specifying r/3 is down....
Fault message implementation.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
How to Guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
there are two transport protocol for File adapter
1)FTP(File transfer protocol)
to know abt FTP check here
http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/content.htm
2)NFS(Network File System)
in server :Enter the host name or IP address of the FTP server.
in PORT:Specify the port number of the FTP server.
The default is the standard port for the FTP server (21)
check here
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
BILL
***reward with points if ity helps u!!

Urgent information required regarding message type and process code

Hi All
We am working on EDI895 transaction (Delivery/Return acknowledgment) and we are using TXTRAW01 Idoc type for the mapping. Can anyone please let me know what the message type and the process code for the IDoc type is???
thanks

Hi,
Welcome to SDN.
Please go to transaction WE64 to find out all process codes available for IDoc type TXTRAW01 with message type TXTRAW.
There are four process codes for message type TXTRAW.
- ED00
- ED00_XML
- ED08
- TXT1
Regards,
Ferry Lianto

Regarding Message Type in ALE

hi guys,
i was involved in Master data distribution using Message Types MATMAS, DEBMAS and CREMAS but never created a customer specific Message Type that is why, i just want to know in what cases do we have to create our own message type's using we31, we30 and we81 and we82.
can any one out here help me out by sharing giving some real time scenario's in what cases do we exactly have to create our own message type.
thanks
Pavan

Hi Pavan,
There is no hard and fast rule that you use standard or custom message types...
SAP has provided messages for almost all scenarios. If you don't have enough fields in standard messgae type, you can enhance it to accumulate your requirement.
But if the organization has completetly custom defined system (involving many Z-tables) , we create custom message types...
As far as my knowledge, we should try to go ahead with standard message types by suppressing unnecessary segments and enhancing existing segments just to avoid Z-objects.
Regards,
Audy

Regarding message type SEQJIT

Hi all
please tell me the equilant ANSI x12 txn number for message type SEQJIT .
Thanks

Hi Pavan,
There is no hard and fast rule that you use standard or custom message types...
SAP has provided messages for almost all scenarios. If you don't have enough fields in standard messgae type, you can enhance it to accumulate your requirement.
But if the organization has completetly custom defined system (involving many Z-tables) , we create custom message types...
As far as my knowledge, we should try to go ahead with standard message types by suppressing unnecessary segments and enhancing existing segments just to avoid Z-objects.
Regards,
Audy

Regarding Idocs and their corresponding message types

Hi,
Being am a trainee can u plz help in providing a list of Idocs and corresponding Message types that are using
in real time..
Thanks & Regards
Guna

Go to "jdk/include" on your drive and take a look at "jini.h". Note, mapping of C type to java types may be different for 16,32 or 64 bit machines. Using jinit, jboolean and others is recommended. On the other hand, if you are sure you won't use your C code in 64 bit or 16 bit environment just forget about it and assume int is java int, long is java long, signed char is java byte and so on. Pointers are more tricky - read carefully jini tutorials.

Regarding Custom defined message types

hi guys,
i never got to work with custom defined message types but got to work with already defined message types and i just want to know why exactly do u need this and can any one please share their experience, why they have to design a custom defined message types especially in SD and MM with an example.
thanks very much,
pavan.

What do you mean by custom message TYPE? We create custom messages all the time at my company, by never a custom message TYPE. Not sure what you mean here.
Regards,
Rich Heilman

Regarding Message Type Structures

Dear XIers,
Is it mandatory to have exact message structures for both outbound and inbound message types in Interface Mapping (only JAVA/XSLT mapping).
Thanks,
jangili

Hi,
Is it mandatory to have exact message structures for both outbound and inbound message types in Interface Mapping (only JAVA/XSLT mapping).
No.
Firslty during the mapping of message types we specify how the data is to be transformed from the source structure to the target structure.This takes care of the structure of message types.
While in interface mapping we just speicfy which mapping program is to be used by the interfaces.
Cheers,
*RAJ*

Idoc and message type not getting replicated in the receiver system

Hi
i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys B

Hi Tarang,
at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
Just look at standard IDocs and do as they do.
Regards,
Clemens

Regarding Solman7.1 message type

Similar Messages

Maybe you are looking for