Regarding sound issue

productnumber:B8NO1PA#ACJ,windows-7 64-bit operating system

Hi,
Please use the following instructions to check and fix:
   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Pavilion dv7-6c95dx Sound issues

    HP Pavilion dv7-6c95dx   laptop 
    I am receiving the following error when trying to add mp3 music to a visual tour program.  Was told it is a computer issue with my audio driver
    MediaException: The driver cannot recognize the specified command parameter.    at MCIMedia.MediaFile.Open(String file)
       at MCIMedia.MediaFile..ctor(String file, Boolean EnforceFileExists, IWin32Window owner)
    Used to work the suddenly quit working.... can anyone advise??

    Please download and install the driver from the following weblink to resolve the sound issue:
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58830.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Pair of sound issues

    I have two very weird and frustrating problems regarding sound on my iMac G5.
    First, certain Flash content will not generate sound at all. The computer has no problem playing sound from movies embedded in websites or mp3s, etc but for some reason embedded Flash content will not play sound. This problem has cropped up before and then went away and seems to have returned. Several uninstalls and reinstalls of both Flash and Shockwave have proven fruitless. No sound is produced whether speakers are plugged in or not. So it seems to be a software issue. My PowerBook with 10.4.2 handles the content without issue.
    Second, the optical portion of my audio-out port seems to be shot. For a while I was successfully using a miniTOSLink adapter to connect some Klipsch ProMedia speakers to my iMac. One day they decided to emit nothing but a loud and annoying static when connected via optical. Connection via analog headphone jack yields normal operation (barring the above problem with Flash).
    And of course my 90 days was up in June.

    I too have had sound issues. I haven't tried the flash and shockwave things you have. I basically don't use them. I have had sound problems with the headphone jack/optical audio out port. I have had my G5 iMac 20" about 1 week and right from the start the sound would jump from external speakers to internal speakers. Most of the time the sound comes from the internal speakers. I opened System Preferences/Sound and I can watch the output jump back and forth between internal and line out. I called Apple Support and they got me to zap the PRAM and reset the Open Firmware. It didn't help. They told me it looks like a short in the port and to take it in to a authorized dealer for repair. Before I do that I have ordered a Xpress Digital Optical Cable from Griffin Technologies hoping this can solve the problem because you and others here have said Digital Optical cables help. There is another thread here about external speakers not recognized and one person says what worked was a combination of digital optical cable and certain adapters. I do have sound from my externals though because I happen to have a iMic. It is an external sound card that connects from USB. That is working fine. I would like to have the digital optical output though.

  • Sound issues; slow response; usb ports unreliable and sd reader not working

    The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
    About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
    I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
    PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
    Help!!!
    Alfriston

    Hi again Alfriston,
    Thank you for the clarification!
    To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link. 
    If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
    In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
    To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
    To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
    If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Equium A300D Sound Issue on Vista

    Hi, I am currently having sound issues with my Toshiba laptop.
    I am running Windows Vista (32 bit). The problem first occured after a windows update, I can't remember what exactly I did but after searching the net for some solutions I quickly found numerous threads regarding the same issue. I followed the instructions for the 'quick-fixs' that people stated throughout the forums. After numerous attempts with messing with regedit and such programmes and hours of searching the net I decided to try here. After messing around with the sound dependencies I now get a differernt issue.
    When I hover my mouse pointer over the sound icon in the bottem right screen it states:
    Volume: 0
    Speakers
    Conexant High Definition Smartaudio221
    When I attempt to higher the volume by right clicking the icon and clicking sound I get 3 tabs:
    Playback, recording & sounds.
    Under Playback I get 3 sound devices:
    Speakers (Conexant High Definition Smartaudio 221) - Working *A green tic beside it
    SPDIF Interface (Conexant High Definition Smartaudio 221) - Working
    Digital Output Device (High Definition Audio Device) - Working
    I tried uninstalling the drivers and installing again from [here|http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action=search&selCategory=2&selFamily=382&selSerie s=173&selProduct=798&selShortMod=727&selOS=26&selT ype=42&country=17&language=13&useDate=1&dayupload= 6&monthupload=12&yearupload=1999&search=]
    I am sure I installed it correctly but I am still having the same problem: When I go into my Speakers properties and click the tab Levels, nothing comes up, it's just blank.
    Any ideas would be helpful
    Regards

    Hello
    I believe that Windows updates can be responsible for this sound issue. Because of that I have disabled automatic updates. Before I install updates I use option View Available updates to see what is listed exactly. I have removed all checkmarks in front of optional updates. Maybe you should do the same and avoid installation of some updates that can have negative influence on well working sound, mouse or other hardware components.
    If you are sure it is because of Microsoft update the first step you can try is to roll back OS to earlier time before you have installed all those updates.
    Have you used TEST option for speakers? Any result?
    Can you hear Windows sounds?
    It is really stupid situation. At the end you must install OS again using recovery image. :(

  • HP Envy 4-1215dx Sound Issues

    Hi, I own an HP Envy 4-1215dx. It's a great unit overall, but I am having problems with the audio on it. From the day I took it out of the box it will randomly spew out quick bursts of buzzing/crackling/digital noise whenever I try and play some sort of media, it will appear to have stopped for a while but then start doing it again, it is quite intermitten. It does it with sound from the internet such as youtube, playing MP3's, and even in Games. It is extremely irritating and I need to find a solution. I have already uninstalled and reinstalled the audio drivers and have had no luck. Doing a quick google search, I found out that there are several other people with the same problem, yet the only answer they get back is to reinstall the drivers. I have done this already and it does not fix the problem. Any help would be appreciated.
    Thanks!

    Hello Livingedge,
    I understand that the driver is an older version. This is the version that is available for your specific product on the HP Driver & Software page. I have been able to locate a driver that is also IDT, but the release date is 2013-09-30. I have included that driver here for you 'IDT High-Definition (HD) Audio Driver'.
    If this driver fails to resolve the sound issue, I would keep an eye on the 'HP Driver & Software' page. This is where if and any updates are available, will be provided here.
    Thank you.
    I worked on behalf of HP

  • Strange sound issue on iPad2

    my mom is having odd sound issues on her iPad 2 that i was able to somewhat fix. and it goes from fixed back to broken o.O
    i thought it was interesting and worth mentioning, in case this happens to anyone else.
    her iPad 2 is up to date on the latest iOS (5.0.1) and the issue occured while she was watching a video in YouTube. sound is totally off in all apps. in Settings>General under 'use side switch to' it is set to 'mute'. when going to Settings>General>Sounds the volume control for ringers will work and cause the ringtone to play, so it seems the speaker itself is fine. however it will only work there and for that short time. afterward sound will continue to remain off. the volume control on the side of the unit will bring up the on screen speaker icon, except it doesnt show the bar that usually goes up and down with the volume. and sometimes at the top of the grey box it will say 'sound effects'. ive also tried switching the mute on and off which changes nothing.
    the one thing ive found that changes anything is the multi tasking bar volume control (double clicking the home button and then sliding all the way to the left, where it shows a screen orientation lock, brightness slider and a volume control bar). now the volume control bar is unfilled and doesnt show the dot that you can slide up and down to change the volume. however when i plug the iPad 2 into a computer (any computer seems to cause this) the volume control bar will suddenly fill and the dot will appear. now suddenly sound works in all apps and will change with the side control again as normal.
    now heres where it gets even weirder!!!
    sometimes when unplugging the iPad 2, after a short while volume will slowly fade out and be unresponsive again. the side buttons stop working and the volume control in the multi tasking bar will be unfilled and unresponsive. repeatedly plugging it in, going back to the multi tasking bar volume control and unplugging will eventually bring volume back. a couple times ive gotten volume to stay on and the volume bar to stay responsive by unplugging it while im in the multi tasking bar. but sometimes this is not the case.
    for the record, ive tried 'turning it off and on again' and resetting all settings and erasing all content and settings (both with starting up from a back up on iCloud and PC, and starting up as a new iPad). ive used two different laptops, one with Windows Vista and one with Windows 7. the iPad is synced with one laptop but aside from using iTunes to back it up and for charging, ive not made any changes to the iPad using these devices. during the entire duration of my attempts to fix it, the iPad has been on no lower than 80% power. ive also called Apple and discussed this with an Apple Care representative. who suggested all the same things id already done, and walked me through all the fixes to make sure i didnt skip anything.
    hopefully and most probable is that its just an issue with iOS 5.0.1. i also have an iPad 2 thats up to date with 5.0.1 and ive not had this issue, YET.
    i just thought it would be beneficial to the community to share this issue and get word out that this is happening. i would like to hear everyones thoughts on this issue and if this has happened to anyone else. the Apple Representative that i spoke to had not heard of or had to deal with this issue so it sounds like its rather new or rare. though she did mention that this is not normal behavior for the device and might be a software issue.
    id like to conclude with my love for Apple, and how user friendly iDevices are in general. ive had iPods from the very first generation and all of them still work (though the older ones cant be updated past a certain iOS). the few issues ive ever had were easily fixed with a visit to the Apple Store or searching on the Apple Support Communities. so as with before, i will remain positive and look forward to a bug fix in the next update.
    -thanks in advanced for reading, and any comments
    Paper_Dragon

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

    Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
    If it does, which one should I change?  A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
    their New OC using whatever name it has.
    On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating.  The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
    unusable.
    However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
    On one of them I noticed the difference in the case of the letters used in the computer name and the license name.  On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem.  Whatever
    it is, it gets extremely annoying.  Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
    Searching Google I have found too many  possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution.   This has only started happening since we switched to Office 365 and only
    seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing  and has 5 available licenses of which only one is in use.
    In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

    Hi Questorfla,
    For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
    http://community.office365.com/en-us/f/148.aspx
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Sound issue on iphone 4 - 7.1.1

    My mom has an iphone 4 that was handed down to her from my sister.  After one of the ios updates...can't remember which one...the phone stopped giving audible notifications for text messages.  As I have tried to troubleshoot this issue I have discovered the other following problems:
    The phone will not play music on any speaker.  I was trying to connect the phone via bluetooth to a speaker bar and when I tried to play pandora, I got nothing.  I then disconnected the bluetooth to see if I would get sound out of the phone's speaker and got nothing.  I attempted to play a downloaded song and got nothing.
    I then tried to see if I could find other issues and I did.  When I go into settings>sounds>ringtones I can switch ringtones and hear the ringtone sample.  When I go into settings>sounds>text tone, I can select any tone in the list and all I get is a vibration, no sound at all from any of them.
    I also found that when pressing the volume up and down buttons on the side of the phone do not produce the pop up box that shows volume going up and down
    I believe these three problems to be related as some kind of systematic software bug.  Can anyone confirm this or offer a possible solution. Keep in mind the phone does make sounds when someone calls also from the speaker phone.  The only non-sound issues are text notifications and playing music.  I find this to be a rather important problem because the phone can really no longer be used as a phone since my mom continually misses text messages because she does not get an audible notification.

    Hello hiknmt06,
    You may need to restart or reset the device.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Should the behavior continue, it may be necessary to restore your iPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • Windows Vista major sound issues

    On my 2 month old Unibody Macbook, I'm experiencing severe sound issues with bootcamp 2.1 in windows vista. While playing games such as Halo 2 or Fallout 3, which the macbook graphically handles exceptionally well for a laptop, the sound crackles and often disappears! To get the sound back I have to reboot my macbook. Help, this is extremely annoying, and apple won't do a thing about it!!! Please help!

    try what I posted here and report back
    http://discussions.apple.com/thread.jspa?messageID=9071165&#9071165

  • Sound issues with MacBook Pro

    I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • Sound issues in iOS6

    I'm having random sound issues since upgrading iPhone to iOS6. For instance, after using iMessage I will sleep the phone without exiting iMessage. 5 mins later I will have messages sent to me but there were no sound notifications indicating such. Only if I exit iMessage prior to sleeping the phone will I hear notifications of new texts or iMessages.   Also, random sounds like the swoosh when sending an email will mute randomly. I have to shut the phone off and restart before it works again.    Why is this happening?

    If you have a iMessage open and into a message, normally it will not sound.  I think it is because you already have it open and in it.  That is what I have noticed.

  • What is a packet problem? I'm having sound issues.

    I'm at my wit's end. I am having sound issues. I've run diagnostic tests and everything comes back as OK, but it's not OK! Something somewhere is messed up and I can't figure it out.
    I have been to the help rooms on paltlak and opened up support tickets and everything they told me to try has not helped. They suggested I change the sound tuning on my chat program, change exceptions on my firewall, uninstall and reinstall chat program, uninstall and install earlier version, download drivers for sound card, and etc. Nothing is helping this problem.
    Someone mentioned that it may be router problems or packet problems. I'm not sure what that means, and that is why I'm on this forum asking for help. I have no other sound problems on my computer. My music and videos play fine. It's just when I'm in a voice enabled chat, do I experience these problems, or if I'm on a website that has videos, the video will not load all the way, so I only get 30 seconds of a video. Does anyone know what could be causing this?
    I have used this chat service for over 5 years and up until a week or so ago, it worked fine. I did a complete reformat of my computer in hopes that it would help, but I'm still having the same problems. I lose sound within 5 seconds of entering the chat room. Then it takes between 3-5 minutes before I hear sound again, but then I only hear it for a few seconds. Then it goes away for another few minutes. Repeat. Over and over again.
    I'm running Windows Vista on an Acer Aspire 380 with wireless cable modem. I keep losing sound in any voice/sound enabled chat and on any site that has videos. I have 1gig of ram, 300 gb hard drive, 32 bit operating system, 2 processor cores, directx version 9, realtek sound card. Everything is up to date, and firmware is up to date. My speed test is: download: 6.162 mbps and upload: 926 kbps.
    When I do the ipconfig/all, it shows
    Tunnel adapter local aera connection* 6: Media State: Media disconnected
    description: teredo tunneling pseudo-interface
    dhcp enabled: no
    autoconfiguration enabled: yes
    I don't know if this has anything to do with my sound issues on the chat program or not. ??
    Also shows:
    node type: hybrid
    dhcp enabled: yes
    autoconfiguration enabled: yes
    default gateway: 192.168.1.1
    dhcp server: 192.168.1.1
    netbios over tcpip: enabled
    If by chance it is a packet problem, how do I fix that?

    Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
    Message Edited by nightrider7000 on 01-22-2008 12:44 PM

  • Regarding Consignment Issue

    Hi Friends,
             I have a question regarding consignment issue. During the consignment fill up I have entered a material (machine) that is configurable and also assigned a serial number to it. Now when I try to create an order (consignment issue) and enter the corresponding serial number tied up to the machine in Consignment fillup, the system is taking just the higher level item of the BOM. The BOM is not getting exploded in the order. Can anyone please suggest where I can control. Any help is greatly appreciated. Thanks in advance.
    Sunny.

    Hi
    I don't think it will b exploded in Consignment Issue as it has already exploded in Consignment fill up. Consignment issue means what selling the stock which is at consignee's place so it dose not have to b exploded. u carr on like that and see what is the flow if it is ok then go on otherwise u let me know the problem.
    Thanks
    Mastan

  • Regarding Performance Issue in MI Application

    Hii All,
    We have made a SmartSync MI Application.Everything thing is working fine.But the scenario is this that when we try to navigate through the application from one page to another ,for example if i click on one link to get details corresponding to that link(i.e) we are retreiving the data from the local database, but this is taking a lot of time and according to our buisness need we have to reduce this time to fetch the data.
    Can anyone help me regarding this issue what can be done either in coding part, what parameters & standards to follow to improve the performance.
    Thanks,
    Devendra Phate

    hello deven,
    if you are only focusing on your application's performance
    on the aspect of usability i.e. less waiting time, fast
    response UI, i would personally suggest you to use AJAX.
    put some processing part on the browser side and making
    data retrieval from MI asynchronous... this way, your user
    don't have to wait for all data to be presented, but rather
    could work on the data presented in pieces (i.e. asynchronously).
    anyway try googling for AJAX...
    regards
    jo

Maybe you are looking for