Regarding Stock transport order price

Hi All
In case of stock transport order at the time of Goods Issue system takes material price from PO because of the condition type P101 has the value 'Internal price'.Is there any way to change this like,at the time of GI system will adopt the PO price(We are giving price manually in stock transport PO) & what is the effect of any price difference occur between material price & PO price.
Thanks & Regards
SC1AC1

This price is picked from material master MAP price...

Similar Messages

Regarding STOCK TRANSPORT ORDER - (351 to 101)

Dear Freinds,
Stock transport order (STO) is created by user for 100 eas in plant 2000.
supplying plant 1000
receiving plant 2000
now goods issue against this STO has been done by supplying plant 1000 with movemen type 351 for 100 eas
but actually only 50 eas are shifted from supplyng plant 1000 to receiving plant 2000, so goods receipt document with movement type 101 for only 50 eas has been posted in plant 2000.
further recieving plant dont want to recieve the remaining 50 eas.
here the situation is that STO is in open status for 50 eas. we need to close this STO.
recieving plant dont want to recieve more quantities where as supplying plant cannot cancel the good issue document-351 for 100 eas.
how to close this STO please assist in this regards..
Thanks and Regards
Vijay Moundekar

Hi,
In this case first you have to cancel the material document created for movement type 101 for 50 no's. and cancel the material document created for movement type 351 for 100 no's.
Now you can do the 351 movement for 50 no's and do the 101 for 50 no's.
Regards,
Manish

Regarding Stock transport order.

Hi All,
I have created PO 4700990101, then I created delivery 89548389, made picking and goods issue.
After this I entered again the same PO and added line 850 with G11735 qty 16 with ticked return box. Saved - it was ok, system permitted it.
After that I created delivery 84434973 and decided to post GR, but system created an error:
"@5C\QError@ E M7 021 10 Deficit of PU GR quantity 16 SU : G11735 RU10 L001 @35\QLong text exists@ G11735 TASKI Tapi Shampoo 2x5L NL+ 16,000 SU"
Could you pleas expalin that what setting need o be done.
Awaiting for your kind reply.
With Regards,
Preeti.

>
Preeti Ramgirwar wrote:
> Hi All,
>
> I have created PO 4700990101, then I created delivery 89548389, made picking and goods issue.
> After this I entered again the same PO and added line 850 with G11735 qty 16 with ticked return box. Saved - it was ok, system permitted it.
> After that I created delivery 84434973 and decided to post GR, but system created an error:
> "@5C\QError@ E M7 021 10 Deficit of PU GR quantity 16 SU : G11735 RU10 L001 @35\QLong text exists@ G11735 TASKI Tapi Shampoo 2x5L NL+ 16,000 SU"
>
> Could you pleas expalin that what setting need o be done.
>
> Awaiting for your kind reply.
>
> With Regards,
> Preeti.
you try to send goods back to your vendor, but you have never received the goods from your vendor, hence you have a deficit of goods receipt quantity for the purchase order. And this is not allowed by SAP.
Do the goods receipt to your delivery first, then you can create a delivery for the return item

Intercompany billing: can price date be taken from stock transport order UB

Hi,
I have an issue and I think that I'm not the first person who has this problem.
We are working with stock transport orders (UB) to relocate goods from one plant to the other (different company codes). We have some troubles with different prices in the purchase order and in the intercompany invoice because of different pricing dates.
Example:
1. the stock transport order is created on 15.02.2012 --> here the price date is 15.02.2012
2. the delivery is created on 25.02.2012 (PGI date 25.02.2012)
3. the intercompany invoice is created. On item level is placed the pricing date 25.02.2012
This situation may lead to a price difference, as already happened several times.
Do I have any chance to take out the pricing date from the stock transport order into the IC invoice?
thanks for help.
Chris

In the copy control settings (t.code VTFL), go to item level and check what value assigned in the field price source. Assign value A and test by creating new documents. If this solution does not resolve your issue, then check the routine assingned in the field Data VBRK/VBRP. In t.code VOFM, copy this routine and create a new routine with additional code for VBRP-PRSDT to have STO pricing date and then add this route in field VBRK/VBRP.
Regards,

Freight accrual - Stock Transport Order - Moving Average Price.

Hi all
   I am trying to add delivery costs (freight accrual) to Stock transport order, where the material in receiving plant is valuated at Moving Average Price (MAP). So, the freight cost is getting rolled over into the material price in the receving plant because of MAP valuation.
    But my client doesnot want that. Instead we want the freight accrual to post to a expense or COGS freight account. Is there way to control this when material is valuated at MAP in receiving plant?
Thanks
Vamsi

Currently, with the outbound delivery for STO and PGI, the following the accouting document is generated.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10200
Cr Freight Clearing Account                       200
Where as I want the accounting document as follows when outbound delivery is created.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10000
Dr COGS Freight Account                          200
Cr Freight Clearing Account                       200
Edited by: VamsiM on Sep 14, 2011 12:17 AM

Proforma Invoice (F8) for Stock Transport Order

With regard to intra-company STO, we have a specific requirement:
Referencing delivery document generated using Xn: VL10B (delivery from Stock Transport Order), we create proforma invoice type F8. Subsequently, excise invoice is created referencing the proforma invoice.We need to capture the material cost plus 10 % of material cost as PR00 value in the invoice.
Problem:
However, here comes the problem: condition type PR00 does not come automaticcally in the proforma invoice, though pricing procedure has PR00 condition type. We have to manually entere the PR00 condition type for every line item (a routine calculates 110% of the value once value is enetered in the manually entered condition)
Is it the standard system behaviour ? Any way out?
with kind regards
Muraleedharan.R

Hi,
Have you maintained the condition records for PR00 , if not than you have to enter it manually at the item level .
If your price is same for all the items than maintain use header condition or else at item level you have to enter PR00 item by item.
Regards,
Krishna O

Delivery costs in stock transport order

Dear SAP experts,
We want to add certain delivery cost in the stock transport order.
We create a new pricing schema with 3 delivery cost conditions "Z" conditions. The new pricing schema is assigned to the stock transport order doc type.
In transaction code me27, when the try tp enter the delivery cost conditions by clicking on the conditions icon, system given an error message saying that "Function not possible for this item". Message No. 06096.
Pricing is as follows -
STKP - Stock transfer price
Z001    10% on STKP
Z002     2% on STKP
Z003     1% on STKP
Kindly help.
Thanks & Regards,

Hi,
Check the following things
1. Make sure manual entry is allowed for Delivery Costs Condition
2. Make sure PO is not yet processed or no subsequent documents exists for the PO so that you can manually edit the PO using ME22N.
Thanks & Regards,

Problem in stock transport order

Hi all,
In stock transport order in item condition tab is not updating .will it updates are not .If it updates what are conditions are to be maintained
Thanks & regards
vr

hi
plz check configuration as follows
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)

Incorrect value for condition type P101 in Stock Transport order

Hello Friends,
We have a scenario where in transfering material from one plant to another using the STO way , the excise duty from the sending plant should be loadded on the inventory of the receiving plant.
In this scenario the excise duty X% is calculated on the condition type P101 (which is the standard price or the moving average price from the material master accounting view)
Giving below a sample cas e for the error occuring:-
- Suppose a material M1 has stock of 5,00,000 EA of total value 2,03,707.16 inr , thus the moving average price calculated by the system is 0.41 inr per unit.
- When i try to create the Stock transport order for this material the P101 condition value now appears as 2,05,000 inr for same 5,00,000 Quantity
If we check the difference between the material master value and condition value their is a difference of 1292.84
As mentioned the excise duty(X%) is now getting calcuated on 2,05,000 . When we do post goods issue against the delivery created for the stock transport order the inventory value posted is from the material master i.e 2,03,707.16 , but the excise value are calculated on 2,05,000 in the Purchase.
This difference in value between the condition P101 in PO and the actual inventory posting value is resulting in incorrect calcuation of the excise duty.
can some help me regarding this issue.
regards,

Dear Gundam,
This might accured due to the rounding off problem, so please chek the rounding off condition type is available in the invoice or not.
If not plaese maintain the rounding off condition type sames as in the sales order then try.
I hope this will help you,
Regards,
Murali.

Proforma Invoice & Excise Invoice in Stock Transport Order

Hi,
What is the business logic for creating a Proforma Invoice & Excise Invoice in Stock Transport Order?
My apologies for putting down the basis question before you.
Regards,
PK

Hi
1. In VF01 from where the net price will come.
you have to maintain in VK11
2. On what value basis, the excise is going to be calculated in J1IIN.
It will calculate on your condition of excise in VK11 and value of VF01
3. What are FI entries in VF01 & J1IIN in the case of Stock Transfer.
check with SD consultant he will clear you
Regards
Kailas Ugale

OCTROI POSTING DURING STOCK TRANSPORT ORDER

Hi,
We have the following scenario.
Octroi has to be paid during goods transfer from one plant to other. I'll be having an octroi agent who'll be paying the octroi for on my behalf. and the actroi agent will get this amount reimbursed once in a month.
We dont want to load this component to inventory. Ideally we look for a posting like the following during STO delivery.
Cost =100
Octroi=10
accounting entry during goods transfer:
Debit receiving plant - 100
Credit issuing plant - 100
debit octroi Expense -10
credit octroi payable -10
Accounting Entry during Octroi agent payment:
Debit octroi Payable -10
Credit Octroi agent - 10
Is this entry possible in SAP.
If not is there any logical reason why it is not possible.
If possible how?
Regards,
Prasad.

Hi,
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions for Octroi Charges in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Octroi Clearing A/c - Cr - 10 INR (Supplying Plant)

Account Postings in case Subscontarcting and Stock Transport Order.

Hi All,
Please help in understanding what account keys(G/L Accounts ) will be hit in the follwoing scenerios:
1. Standard Subscontarcting Process during GR.
2. Stock Transport Order , Delivery Type NL
    Movement Type , 641 and 101.
3. Stock Transport Order , Delivery Type NLCC
    Movement Type , 643 and 101.

Hi
1. Standard Subscontarcting Process during GR:
For eg) You are giving Components A & B to the SC-Vendor....and Getting back the Finished Product "C" from the SC-Vendor....
Now during GR...If you have activated Price Diff. account for SC Materials for your Plant in OLMB -
> GR -
> Activate Price Diff. Acc. for SC Material for your Plant....then foll. posting lines will be created..
Stock Acc. of F/G Product "C".... ..      BSX          Debited
GR/IR Clearing Acc.              .......       WRX         Credited
SC-Vendor service Charges .........       FRL          Debited
Stock Acc.of Components A & B..........BSX          Credited
Change in Stock Acc. of Comp. A&B....GBB-VBO Debited(+)
Change in Stock acc.of F/G Product "C".....BSV    Credited(-)
Price Diff Acc......................................PRD   As per situation
2. Stock Transport Order , Delivery Type NL
Movement Type , 641 and 101:
At Supplying Plant( During movement type:641)
Stock Account of Supp.Plant.....BSX Credited
Stock Acc. ofb Rec. Plant ........BSX Debited
If you maintain Std. Price for the material at Receiving Plant and if there is any Price difference...then Price Diff.Acc. will be triggered....ie) AUM....
At receiving Plant( for M.type:101) there will not be any acc.documents gennerated...
3. Stock Transport Order , Delivery Type NLCC
Movement Type , 643 and 101.
At Supplying Plant(M.Type:643):
Stock Acc.......................................BSX Credited(-)
Cost of Goods Sold Acc...................VAX debited(+)
At Receiving plant( M.Type:101):
Stock Acc.......................................BSX Debited
GR/IR Clearing Acc..........................WRX Credited(-)
Reward if useful
Regards
S.Baskaran

Intercompany stock transport order : MM pricing = SD pricing

hi all,
Intercompany stock transport order process :
ME21N <-- MM pricing
VL10
VF01 <-- SD pricing
MIGO
MIRO
Is there a standard (!!!) or a known method to get in any case : SD pricing = MM pricing ?
Using the standard customizing we have to maintain an identical price on both sides purchasing and sales. It could be better !
Thanks for help

Hi Alain,
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant, Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO> define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM> Purchasing > Purchase Order > Set up STO> define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM> Purchasing > Purchase Order > Set up STO> assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO>Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Also check this link.
http://www.sap-img.com/sap-sd/configure-intercompany-stock-transport-order.htm
Regards,
Rahul.

Cross Sales & User exits & stock transport orders

Hi all,
<b>
Can anyone tell me about Cross Sales & User exits ?
Also what is stock transport orders ? Can i get some config. steps for that ?</b>
My id : [email protected]
Rajarshi

Hi,
Mail order catalog retailers frequently use cross selling to increase sales. When a customer orders an article over the phone, the order taker can suggest additional articles that the customer might buy. For example, if the customer orders a VCR, you might suggest purchasing some blank tapes; for a cellular phone, a leather carrying case.
The sales transaction takes place as normal: The customer chooses an article and the order taker enters it on the sales order screen. The order taker can press Enter after each article, or wait until the customer has finished selecting the article he or she wants.
If the order taker presses Enter after entering the data for one article, then a dialog box appears automatically, displaying a list of articles to be suggested to the customer. These cross selling articles are ones that pertain specifically to the purchased article.
If the order taker waits to press Enter until the customer has finished ordering, then the dialog box appears automatically, this time showing all of the articles in the sales order, along with their corresponding cross selling articles.
The articles that appear in the cross selling dialog box always depend on which articles are in the sales order. If you want to have the system suggest articles based on the customer's past purchasing history or other factors, see Dynamic Product Proposal in the standard SD documentation.
The cross selling dialog box displays the following information:
Article number
Description
Sales unit of measure (each, 3-pack, etc.)
Price per unit of measure (calculated either by the standard R/3 pricing scheme or by a custom pricing scheme you have defined)
Availability check
Delivery flag (that is, whether the cross selling articles can be delivered independently of their corresponding main articles in the sales order, or whether the cross selling articles can only be shipped either together with or after the main articles have been shipped)
To set up cross selling, you must make the following settings in Customizing:
Create the conditions tables, access sequence, and calculation schemes for determining cross selling articles, since the cross selling function relies on the conditions technique. (Alternatively, you can use the analysis discussed in "Activities" below to create the data automatically.)
Create a cross selling profile with the following attributes:
Determination of cross selling articles via function module
Price calculation scheme
Scheme using conditions technique
Flag indicating how the cross selling dialog is to appear
Flag indicating whether an availability check is to be performed
Assign the cross selling profile to a sales area, document scheme, and customer scheme.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
Reward ipoints if useful
Regards,
Amrish Purohit

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Regarding Stock transport order price

Similar Messages

Maybe you are looking for