Regarding structure of abap program

hi,
can any one exaplain to me what is the structure of the abap program.
thank&regards,
ramnaresh

Hi..
This is the Structure of ABAP program.
REPORT <NAME>.
**Global Data definitions
TYPES:
DATA:
**Selection Screen Definition
SELECT-OPTIONS
PARAMETERS
**Event Blocks
INITIALIZATION .
 perform X.
START-OF-SELECTION.
 perform Y.
****Form routines definition
FORM X.
ENDFORM.
FORM Y.
ENDFORM.
<REMOVED BY MODERATOR>
Message was edited by:
 Alvaro Tejada Galindo

Similar Messages

Structure of ABAP program

hi SDNs,
           what is the typical structure of an ABAP program?
           thanks and regards,
               aravind.

hi
plz check the structure of ABAP Program under..
http://help.sap.com/saphelp_47x200/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
below the typical structure...
1.data declaration
2.selection-screen declartion
3.data validation
4.output.
Cheers
Abdul Hakim

How to use structure in ABAP program

I developing a report in smartforms but i want some fields to be display on the report but unable to find the relvent table as the field is show in structure.i can not find the actual table . is there any specfic way to find the table .or is there any way to use the fields defind in structure in my ABAP program.

Hi,
May be iam not clear with the question. But why you want to use structure. In report you can define your own structure, also you can declare your fields directly using standard datatypes.
Hope this will help!!!
Amol

Regarding Conversion Of ABAP program from non unicode to uni code

Hi Can you please let me know the procedure for converssion of non unicode to unicode?
Thanks in advance,
zubera

Hi
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji

Updating A Structure using ABAP Program

Hi,
V r using a structure...IOOPCOMP, in COOIS Transaction.
its fetching data from MARA, and other tables too. V want a new Field included in IOOPCOMP, from MARA, and get it Updated.
There's no user exit available for COOIS.
Its urgent.
Pls Do let us know How to proceed.
Regards,
Ajaz

Hi Ajaz
There is an Append Structure ZRESB. Try inserting your new field with the same name as in MARA to it. However, I am not sure whether it wil be filled.
Hope this solves your problem.
Kind Regards
*--Serdar
[email protected]

Abap program standards

hi all,
 i need to design flow chart for checking for a program whether it satifies the abap coding standards or not. who to do it. if possible send me graphical representations [flow charts] or links to find programming standards.
some of my requirements in that folw chart are
1. how to recognize a blank space in a given program,
2. how to recognize a comment,
3. how to check wheteher a keyword is used or not,
4. how to identify the ' :' symbol
thanks & regards,
suresh babu aluri.

plz go through this documementaion,
i think its helpful.
ABAP Programming StandardsContents
1. Objective 5
2. Naming Conventions 5
2.1 Codes for naming conventions 5
2.1.1 Module Codes 5
2.1.2 Free text 6
2.2 Naming Convention of Development Objects 6
2.2.1 Package 6
2.2.2 Executable Program 6
2.2.3 BSP Application 7
2.2.4 Logical Database 8
2.2.5 SAP Scripts /Smartforms 9
2.2.6 Idocs 9
2.2.7 Transaction Code 10
2.2.8 Function Groups 10
2.2.9 Dictionary Objects 11
2.2.10 Message Class 11
2.2.11 Enhancement Projects (User Exits) 11
2.2.12 LSMW Objects 12
2.2.13 Classes 12
2.2.14 BOR Object Types 13
2.2.15 Screen / Transaction Variants 13
2.2.16 Area Menu 13
2.3 Naming of Sub-Objects 13
2.3.1 Program Sub-Objects 13
2.3.2 SAP Script /Smartform sub-objects 14
3. General Programming Guidelines 14
3.1 Modification Logs 14
3.2 Program Organization 15
3.2.1 Executable Programs 15
3.2.2 Dialog Programs 15
3.3 Package 15
3.3.1 Adding Components to existing objects 15
3.3.2 Creation of New Objects 15
3.4 Program Messages 15
3.4.1 Adding Messages to existing landscapes 15
3.4.2 Creation of New Objects 16
3.5 Dictionary Objects 16
4. Structure of ABAP Programs 16
4.1 Type 16
4.2 Status 18
4.3 Authority Check 18
4.4 Program Structure 19
4.4.1 Declaration data for global data, classes and selection screens 19
4.4.2 Container for Processing Blocks 19
4.4.3 Calling Processing Blocks 20
4.5 Screen Flow Logic (Dialog Programs) 20
4.5.1 Place the AT EXIT COMMAND at the beginning of the flow logic. 20
4.5.2 Use FIELD and CHAIN statements to keep fields in error open for correction. 20
4.6 Main Program 20
4.6.1 Events 20
5. General Coding Standards 21
5.1 One command per line 21
5.2 Indented Source Code 21
5.3 Extended Syntax Check 21
5.4 Reusability and Modularity 21
5.5 Text Handling 21
5.6 Usage of System Variables 22
5.7 Chaining Statements 22
5.8 Common Routines 22
5.9 Dialog Messages 22
5.10 Function Keys 23
5.11 Enqueuing and Dequeuing Data Objects 23
5.12 Error Handling (SY-SUBRC) 23
5.13 General Conventions and Hints 24
5.14 Parameters in Sub-Routines 24
6. Performance Standards 25
6.1 General Tips on Performance Tuning 25
6.1.1 Avoid Redundant code 25
6.1.2 Subroutine Usage 25
6.1.3 Case vs. Nested IF 25
6.1.4 Using the MOVE Statement 25
6.1.5 SELECT Queries 25
6.1.6 Using the READ statement 27
6.1.7 Hashed table 27
6.1.8 Transporting 28
6.1.9 Using LDB 28
6.1.10 Append Lines of 28
6.1.11 Use WHILE 28
6.1.12 DELETE <itab> WHERE 28
6.1.13 Using WHERE clause in LOOP.ENDLOOP 28
1. Objective
The objective of this document is to describe general programming guidelines, methodologies, Naming conventions and performance guidelines for all the programs developed for SAP Project.
2. Naming Conventions
This chapter describes the naming conventions to be followed for naming the programming objects for SAP project.
2.1 Codes for naming conventions
The variable portion of naming convention is given with Code ID given in angle brackets(<>). Use the following tables for replacing code IDs with codes in the object naming.
2.1.1 Module Codes
Code ID: mm
Code Description
FI Finance
CO Controlling Module
MM Materials Management
PP Production Planning
SD Sales & Distribution
QM Quality Management
PM Plant Maintenance
IM Inventory Management
WM Warehouse Management
BC Basis Module
BW Business Warehouse
WF Workflows (Master Data Management)
HR Human Resources
EBP EBP
PS Project Systems
PCP Synpro: Product Costing
PAP Synpro: COPA
DP APO : Demand Planning
SP APO : Supply Network Planning
DS APO : Production Planning & Detailed Scheduling
AT APO : Global ATP
TP APO : Transportation Planning/Vehicle Scheduling
CI Core Interface
LC Live Cache
2.1.2 Free text
Code ID: ffff
Developer should replace ffff with meaningful text. The text can be multiple words separated by underscore.
2.2 Naming Convention of Development Objects
2.2.1 Package
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with Module codes given in section 2.1.1 above.
2. Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3. The maximum permissible length for development class is 30 characters
Examples:
Dev. Class Description
ZFI_AR FI: Account Receivables
ZCO_CCA CO: Cost Center Accounting
2.2.2 Executable Program
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
3. The maximum permissible length for program name is 30 characters. However, the name should be restricted to 25 characters to accommodate appropriate Include naming as described in 2.2.2.
Examples:
Program Name Description
ZFI_VAT_RET FI: Report for VAT Return
ZMM_AUTO_GR MM: Automated Goods Receipt
ZSD_XX_STCK_SHORTAGE SD: Stock shortage report for stock allocation
2.2.2.1 Includes for executable programs
Naming Convention: Z<mm>_<ffff>_<Inn>.
Notes:
1. All includes of executable program will be prefixed by Z, followed by the same program name as described in 2.2.2 above.
2. Replace <Inn> with include type and sequence number. Use the following table for includes.
Include Type ID Description
TOP Top Include.
Fnn Subroutine pool (Forms)
Inn PAI Modules
Onn PBO Modules
Xnn Other Includes
The maximum permissible length for Include name is 30 characters.
Examples:
Include Name Main Program Name Description
ZFI_VAT_RET_TOP ZFI_VAT_RET FI: Report for VAT Return Top Include
ZFI_VAT_RET_F01 ZFI_VAT_RET FI: Report for VAT Return Forms
ZMM_AUTO_GR_TOP ZMM_FR_AUTO_GR MM: Automated Goods Receipt Top include
ZMM_AUTO_GR_F01 ZMM_FR_AUTO_GR MM: Automated Goods Receipt Forms
2.2.3 BSP Application
2.2.3.1 Main Application
Naming Convention: BSP Applications shall follow the same Naming Convention as Executable Programs i.e. Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
2.2.3.2 Pages & Controllers
Naming Convention: <ffff>
Notes:
1. Replace <ffff> with meaningful text, that adequately describes the function of the page/controller
2.2.3.3 Theme
Naming Convention: Z_<ffff>.
Notes:
1. Replace <ffff> with meaningful text
2.2.3.4 Mime Objects:
Naming Convention: <ffff>
1. A MIME Object can be logo for the company.
2. Replace <ffff> with meaningful text, that adequately describes the function of the MIME objects
2.2.3.5 Controller and Handler Classes:
See section Classes (Section 2.2.133)
2.2.3.6 BSP Extension
Naming Convention: Z_<ffff>
Notes:
1. Replace <ffff> with meaningful text
2.2.3.7 BSP Layout elements id
Label: lb_fffff
Input field: if_fffff
Button: b_fffff
Text Edit: te_fffff
Text View: tv_fffff
Radio button Group: rbg_fffff
Radio button: rb_fffff
Check Box Group: cbg_fffff
Check Box cb_fffff
Tray tr_fffff
Tabstrip ts_fffff
Tableview tab_fffff
1. Replace <fffff> with meaningful text
2.2.4 Logical Database
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text
3. The maximum permissible length for LDB name is 20 characters. However, the name should be restricted to 15 characters to accommodate appropriate Include naming
4. LDB Program and LDB Program Includes shall follow the naming convention Auto-Generated by SAP
2.2.5 SAP Scripts /Smartforms
Naming Convention: ZF<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
Examples:
Form Name Description
ZFFI_EMP_CONF Employee Confirmation Letter
ZFFI_ANN_TO Annual Turnover Letter To Customers and Vendors
2.2.6 Idocs
2.2.6.1 Idoc Types
Basic Type :
Naming Convention : ZB<FFFF>NN
Notes:
1.Replace <NN> with sequence number.
3. Replace <ffff> with meaningful text.
Extension Type : ZX<Basic type name>_NN
Notes:
1. Replace <NN> with sequence number .
2.2.6.2 Message Types
Naming Convention : ZM<mm><ffff>.
Notes :
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text .
2.2.6.3 Process Code
Naming Convention : Z<ffff>.
Notes :
1. Replace <ffff> with meaningful text ..
2.2.6.4 IDOC Segments
Naming Convention : Z1<ffff>.
Notes :
1.Replace <ffff> with meaningful text as illustrated in examples below.
2.2.7 Transaction Code
Notes:
1. The tcode name is provided by SAP TIN The Developer must write a mail to SAP Tin asking for the T-Code name with a filled form.
The form can be found at :
2.2.8 Function Groups
Naming Convention: Z<mm><ffff>
Notes:
1. Replace <mm> with relevant module code as given above
2. Replace <ffff> with meaningful text.
2.2.8.1 Function Group Include Programs
Naming Convention: LZ<Function Group><Inn>.
Notes:
1. All includes of Function Group program will be prefixed by LZ, followed by the Function Group name
2. Replace <Inn> with include type and sequence number. Use the values from the table given in 2.2.2.1
Examples:
Include Name Function Group Name Description
SAPLZMMPURCHASING ZMMPURCHASING F.Group-Purchasing: Main Program
LZMMPURCHASINGO01 ZMMPURCHASING F.Group-Purchasing: PBO
LZMMPURCHASINGI01 ZMMPURCHASING F.Group-Purchasing: PAI
LZMMPURCHASINGF01 ZMMPURCHASING F.Group-Purchasing: Forms
LZMMPURCHASINGTOP ZMMPURCHASING F.Group-Purchasing: Data Declarations
2.2.8.2 Function Modules
2.2.8.2.1 Normal Function Modules
Convention: Z_<mm>_<ffff>.
Notes:
1. Replace <mm> with relevant module code as given above.
2. Replace <ffff> with meaningful text.
2.2.8.2.2 IDOC Function Modules
Convention: Z_IDOC_<mode>_<msg type>.
Notes:
1. Replace <mode> with INPUT or OUTPUT depending on whether the function processes incoming or outgoing IDOC.
2. Replace <msg type> with the IDOC message type.
2.2.9 Dictionary Objects
Tables: Z<mm><ffff>
Structures: ZS<mm><ffff>
Views: ZV<mm><ffff>
Data Element: ZDE<mm><ffff>
Domain: ZDO<mm><ffff>
Table Type: ZTT<mm><ffff>
Type Group: Z<ffff>
Search Help: ZSH<mm><ffff>
Lock Object: EZ<mm><ffff>
Notes:
1. Replace <mm> with module code given above.
2. Replace <ffff> with meaningful text.
2.2.10 Message Class
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with Module codes given in section 2.1.1 above.
2. Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3. The maximum permissible length for development class is 30 characters
Examples:
Msg. Class Description
ZFI_AR FI: Account Receivables
ZCO_CCA CO: Cost Center Accounting
2.2.11 Enhancement Projects (User Exits)
Convention: Z<XX><nn>.
Notes:
1. XX is the application area code e.g. for sales it is SD etc.
2. 'nn' is one up number for one application area. It starts with 001.
3. Maximum length of the Project name is 8.
Example: The name of the SD enhancement project can be ZSD001.
2.2.12 LSMW Objects
2.2.12.1 Project
Naming Convention: ZM_<ffff>.
Notes:
1. 1. Replace <ffff> with meaningful text
2. The maximum permissible length for Project name is 16 characters. But please limit it to 12.
Example : ZM_VENDOR
2.2.12.2 SubProject
Naming Convention: ZM_<ffff>_<n>.
Notes:
 Suffix Project name with a running sequence no.
Example : ZM_VENDOR_1
2.2.12.3 Object
Naming Convention: ZM_<ffff>_<n><n>.
Notes:
 Suffix Subproject name with a running sequence no.
Example : ZM_VENDOR_11
2.2.13 Classes
Naming Convention: ZCL_[IM/DF/BSPCO/BSPHN/BADI]_<ffff>.
1. IM: Implementation Class;
DF: Definition Class
BSPCO: BSP Controller class
BSPHN: BSP Handler class
BADI : BADI implementation
2. Replace <ffff> with meaningful text: In case of Implementation classes, it should preferably be the same as that of the Definition Class
3. Example:
IMPLEMENTATION Class: ZCL_IM_REBATE_SETTL
DEFINITION: ZCL_DF_REBATE_SETTL
2.2.14 BOR Object Types
Object Convention Example
Supertype Z<ffff> ZLVAPPL
SubType Z<SuperType><nn> ZZLVAPPL01
Program <Subtype> ZZLVAPPL01
1. Replace <nn> with a running 2 digit serial Number
2. Replace <ffff> with meaningful text
2.2.15 Screen / Transaction Variants
Naming Convention: <tcode>_<ffff>
Where:
1. Replace <tcode> with the t-code that will be assigned to this Variant
2. Replace ffff with a meaningful text
E.g.:
For an SE16 variant for table KONA that will be used by T-Code Z_CH_SD_001:
Z_CH_SD_001_KONA
2.2.16 Area Menu
Naming Convention: Z<mm>_<Main Menu>_<ffff>
Where:
1. Replace <mm> with the Module code
2. Followed by the hierarchical position of the immediate parent of this Area Menu
3. Followed by a Meaningful text for this Menu
E.g.:
ZSD
ZSD_TAB
ZSD_TAB_VIEW
ZSD_TAB_UPDT
Notes:
1. Clusters of Transactions should be introduced as Sub-Menus rather than as Folders
2. As a gradual process, the current Clusters that exist as Folders should also be replaced with Sub-Menus
2.3 Naming of Sub-Objects
2.3.1 Program Sub-Objects
Naming of all the internal components of a program will be consistent across the project.
Naming Convention: <Prefix>ffff.
Notes:
1. Replace <Prefix> with the component prefix values given in the table below.
Program Component Prefixed by
Program Constants C_
Global Variables W_
Types Definition T_
Global Structures WA_
Global Internal Tables I_
Select-Options SO_
Parameters PO_
Table Type TT_
Field Symbols FS_
Ranges R_
Local Constants LC_
Local Variables L_
Local Static Variables LS_
Local Internal Tables LI_
Local Work Area LWA_
Local Range LR_
Field Groups FG_
Container CO_
Macro MA_
Important: The Same sequence as above must be followed in the Data declaration part of all the ABAP/4 programs.
2.3.2 SAP Script /Smartform sub-objects
Naming of all the internal components of a SAPScript/SmartForm shall follow the same convention as for Programs (2.2.2), with the addition of the Field Label on the FRS. E.g. if the FRS has labeled a field for Sales Order Number as Field 27 on the Layout, the variable name should be W_27_VBELN.
3. General Programming Guidelines
3.1 Modification Logs
At the top of every ABAP Object Modified by a Developer, there should be a Modification Log Every Line Created/Changed by the developer should be Identifiable by the TR Number.
ABAP Patterns: Following Patterns should be used for Uniform ModLogs:
Nature of Change Pattern to Use
New Development ZZNEWPROG
In-Line Logs ZZLINE
Modification Logs at the Top of Object ZZMODLOG
3.2 Program Organization
All the programs will be organized as described below.
3.2.1 Executable Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
3.2.2 Dialog Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
PBO Include: Include for PBO Modules
PAI Include: Include for PAI Modules
3.3 Package
All the related objects within a sub-module of SAP will be developed under a single Package.
3.3.1 Adding Components to existing objects
When adding new workbench components to existing Objects, the same Package will be used as has been used for the existing Components
3.3.2 Creation of New Objects
When creating new Objects or new Sub-lanscapes, Packages used should have the Naming convention as in Section 2 Above
3.4 Program Messages
All the messages within a sub-module of SAP will be grouped under a single Message Class.
3.4.1 Adding Messages to existing landscapes
When adding new messages for existing Objects, the same Message Class will be used as has been used for the existing Objects
3.4.2 Creation of New Objects
When creating new Objects or new Sub-landscapes, Message classes used should have the Naming convention as in Section 2 Above
3.5 Dictionary Objects
Whenever you create a Z table in system always include MANDT field as the first field, except when the table contains client independent data. Also create the table with attribute Data Class as USER.
4. Structure of ABAP Programs
4.1 Type
 When an ABAP program is run, its processing blocks are called. ABAP programs are controlled from outside the program itself by the processors in the current work process. For the purposes of program flow, we can summarize the screen processor and ABAP processor into the ABAP runtime environment. The runtime environment controls screens and ABAP processing blocks. It contains a range of special control patterns that call screens and processing blocks in certain orders. These sections are also called processors. When a ABAP program is run, the control passes between various processors.
 In the R/3 System, there are various types of ABAP program. The program type determines the basic technical attributes of the program, and must be set when created. The main difference between the different program types is the way in which the runtime environment calls its processing blocks.
 When an application program is run, it must at least call the first processing block from outside the program, that is, from the runtime environment. This processing block can then either call further processing blocks or return control to the runtime environment. When an ABAP program is started, the runtime environment starts a processor (dependent on the program type), which calls the first ABAP processing block.
 The following program types are relevant to application programming:
Type 1
 Type 1 programs have the important characteristic that they do not have to be controlled using user-defined screens. Instead, they are controlled by the runtime environment, which calls a series of processing blocks (and selection screens and lists where necessary) in a fixed sequence. User actions on screens can then trigger further processing blocks.
Type M
 The most important technical attribute of a type M program is that it can only be controlled using screen flow logic and run via a transaction code which is linked to the program and one of its screens (initial screen).
 ABAP programs with type M contain the dialog modules belonging to the various screens. They are therefore known as module pools.
Type F
 Type F programs are containers for function modules, and cannot be started using a transaction code or by entering their name directly.
 Type F programs are known as function groups. Function modules may only be programmed in function groups. The Function Builder is a tool in the ABAP Workbench that is used to create function groups and function modules. Apart from function modules, function groups can contain global data declarations and subroutines. These are visible to all function modules in the group. They can also contain event blocks for screens in function modules.
Type K
 Type K programs are containers for global classes in ABAP Objects. Type K programs are known as class definitions. The Class Builder is a tool in the ABAP Workbench that can be used to create class definitions.
Type J
 Type J programs are containers for global interface in ABAP Objects. Type J programs are known as interface definitions and are created in the Class Builder.
Type I
 Type I programs - called includes - are a means of dividing up program code into smaller, more manageable units. The coding of an include program can be inserted at any point in another ABAP program using the INCLUDE statement. There is no technical relationship between include programs and processing blocks. Includes are more suitable for logical programming units, such as data declarations, or sets of similar processing blocks. The ABAP Workbench has a mechanism for automatically dividing up module pools and function groups into include programs.
4.2 Status
P = SAP standard production program
K = Customer production program
S = System program
T = Test program
Application
 Categorize the program according to the purpose it fulfills.
4.3 Authority Check
Authority checks will be carried out as given in the respective FRSs.
4.4 Program Structure
ABAP programs are responsible for data processing within the individual dialog steps (ie. events) of an application program. This means that the program cannot be constructed as a single sequential unit, but must be divided into sections that can be assigned to the individual dialog steps. To meet this requirement, ABAP programs should have a modular structure. Each module is called a processing block. A processing block consists of a set of ABAP statements. When a program is run, effectively a series of processing blocks is called. Therefore, they should not be nested but modularized.
 Each ABAP program consists of the following two parts:
4.4.1 Declaration data for global data, classes and selection screens
 The first part of an ABAP program is the declaration part for global data, classes, and selection screens. This consists of:
 All declaration statements for global data. Global data is visible in all internal processing blocks and should be defined using declarative statements that appear before the first processing block, in dialog modules, or in event blocks. Local data should not be declared in dialog modules or event blocks.
 All selection screen definitions.
 All local class definitions (CLASS DEFINITION statement). Local classes are part of ABAP Objects, the object-oriented extension of ABAP.
 Declaration statements which occur in procedures (methods, subroutines, function modules) form the declaration part for local data in those processing blocks. This data is only visible within the procedure in which it is declared.
4.4.2 Container for Processing Blocks
 The second part of an ABAP program contains all of the processing blocks for the program. The following types of processing blocks are allowed:
1. Dialog modules (no local data area)
2. Event blocks (no local data area)
3. Procedures (methods, subroutines and function modules with their own local data area).
 Whereas dialog modules and procedures are enclosed in the ABAP keywords which define them, event blocks are introduced with event keywords and concluded implicitly by the beginning of the next processing block.
 All ABAP statements (except declarative statements in the declaration part of the program) are part of a processing block. Non-declarative ABAP statements, which occur between the declaration of global data and a processing block are automatically assigned to the START-OF-SELECTION processing block.
4.4.3 Calling Processing Blocks
 Processing blocks can be called from either the ABAP program or using ABAP commands which are themselves part of a processing block. Dialog modules and event blocks are called from outside the ABAP program. Procedures are called using ABAP statements in ABAP programs.
 Calling event blocks is different from calling other processing blocks for the following reasons:
 An event block call is triggered by an event. User actions on selection screens and lists, and the runtime environment trigger events that can be processed in ABAP programs. Define event blocks for the events that the program needs to react to (whereas a subroutine call, for example, must have a corresponding subroutine). This ensures that while an ABAP program may react to a particular event, it is not forced to do so.
4.5 Screen Flow Logic (Dialog Programs)
4.5.1 Place the AT EXIT COMMAND at the beginning of the flow logic.
Example:
PROCESS AFTER INPUT
 MODULE EXIT_1170 AT EXIT-COMMAND.
 MODULE PAINT_1170.
4.5.2 Use FIELD and CHAIN statements to keep fields in error open for correction.
Example:
 PROCESS AFTER INPUT.
 MODULE EXIT_1170 AT EXIT-COMMAND.
 CHAIN.
 FIELD BTCH1170-JOBNAME.
 FIELD BTCH1170-USERNAME.
 FIELD BTCH1170-FROM_DATE.
 FIELD BTCH1170-FROM_TIME.
 MODULE PAINT_1170.
 ENDCHAIN.
4.6 Main Program
4.6.1 Events
The Program MUST NOT be coded without the use of Proper Coding blocks
 Initializations
 Top-of-page during line-selection
 At Selection-Screen
 At Line-Selection
 At User-Command
 At Pfn
 Start-Of-Selection
 Top-Of-Page
 Get
 End-Of-Page
 End-Of-Selection
NOTE: The coding for each event should be logically split into forms (subroutines). That is to say, each event will comprise mostly of PERFORM statements.
5. General Coding Standards
5.1 One command per line
Each ABAP/4 command consists of a sentence ending with a period. Multiple commands can be on one line; however, as a standard start each new command on a new line. This will allow for easier deleting, commenting, and debugging.
5.2 Indented Source Code
The ABAP/4 editor has a "Pretty Printer" command to indent by 2 positions specific lines of code and add subroutine comments. Event keywords are typically not indented.
5.3 Extended Syntax Check
Extended Program Check (EPC) to be done on each object to make sure the code is Syntactically correct. There should be no Error/warning messages in the code.
5.4 Reusability and Modularity
If a block of code is executed more than once, it should be placed in a subroutine at the bottom of the code. This makes the code more readable, requires less indentation, and is easier to debug since the debugger can jump through an entire subroutine via a PF key. Also, when possible parameters should be passed to and from subroutines to make the purpose easier to understand and reduce the need for global variables. Always document the purpose of each parameter.
5.5 Text Handling
Text elements must be used to display any text messages.
5.6 Usage of System Variables
The system variables should be used wherever possible. The SY-SUBRC is to be checked after any function call, selection operation, etc.
5.7 Chaining Statements
 Consecutive sentences with an identical beginning shall be combined into a chained statement.
Example:
Instead of the statements
MOVE SY-MANDT TO D00001-MANDT.
MOVE SY-LANGU TO D00001-SPRAS.
A chained statement shall be used
MOVE:
 SY-MANDT TO D00001-MANDT,
 SY-LANGU TO D00001-SPRAS,
 SY-UNAME TO D00001-BNAME.
5.8 Common Routines
 Standard sub-routines should be implemented as FUNCTION's rather than a FORM (ie. SUBROUTINE). A FUNCTION is easier to maintain and can be easily tested without a calling program. Standard SAP function modules are also available and the function library should be used to check if function modules already exist for a function that needs to be performed i.e.POPUP_TO_CONFIRM_LOSS_OF_DATA etc.
 Includes can also be created for re-usable or common code e.g. common data declaration statements.
5.9 Dialog Messages
Dialogue messages are stored in table T100. Programmers shall check to see if an appropriate message exists before adding a new message. Programs shall use the message-id which corresponds to the SAP module that the program most relates to.
5.10 Function Keys
PF-keys should be programmed to execute functions where required. SAP Standard function keys should be used where appropriate. The most commonly used buttons should be displayed as pushbuttons in the application toolbar.
5.11 Enqueuing and Dequeuing Data Objects
 All database objects being processed by a program, for purposes other than for display, shall be enqueued before such processing is executed. If the enqueue is unsuccessful, then a message shall be returned stating why the enqueue was unsuccessful.
 Enqueue and Dequeue objects should be created via the data dictionary.
5.12 Error Handling (SY-SUBRC)
 Return codes shall always be checked immediately after an event which returns a code.
Eg. Function calls, Select statements, Updates etc.
 The value of SY-SUBRC is 0 when successful and generally produces a value of 4 when unsuccessful (there are a few exceptions).
Therefore, rather check SY-SUBRC with:
 IF SY-SUBRC <> 0
than with
 IF SY-SUBRC = 4 (which is redundant and makes the system do a double check)
 Error messages displayed to the user must be clear and descriptive.
 Remember to group related / dependant steps together and to Rollback all changes for steps in that group should any one of them fail, thus maintaining the integrity of the system.
 Check whether an Error Log, (file), must be produced by your program and if so check on the format of the file.
 If any Error Logging is done to a custom table in the database then make sure this table is maintained and monitored correctly. (Dev. Note)
 Transaction SE91 provides the facility to create and utilize messages in their appropriate message class. Elaborate on the message if necessary, using the long text documentation for that message number.
5.13 General Conventions and Hints
 There should be NO hard coding of values in programs easy maintainability
 For amounts, use the CURRENCY command in write statements to automatically convert fields into their correct decimal format. The currency specified in the write statement is treated as a key for the table TCURX. If no entry exists for the currency specified, the system assumes two decimal places.
 For quantities, use the UNIT command in write statements to automatically convert fields into their correct decimal format. The contents of the unit specified are used on table T006. If no entry exists for the unit specified, the formatting has no effect.
 Use the LIKE statement as often as possible to declare DATA variables instead of an explicit TYPE declarations.
 Try to use the INCLUDE statement with standard SAP structures and tables for your structures and internal tables where possible. If you use the include statement to include other program components in your code then document what those components are, what they do and how to use them.
 Try to make use of standard SAP Function Modules wherever possible rather than building your own. Use the pull down functionality in transaction SE37 to find suitable standard function modules.
 Make use of the SAP PATTERN tool to automatically insert the standard code for:
 CALL FUNCTION
 MESSAGE ID
 SELECT*FROM
 PERFORM
 AUTHORITY-CHECK
 WRITE
 CASE
 CALL DIALOG
 The standard date format to use is DD/MM/YYYY. (Dev. Note)
The standard time format to use is HH:MM:SS.
5.14 Parameters in Sub-Routines
Naming convention for Parameters in subroutine is P_
6. Performance Standards
6.1 General Tips on Performance Tuning
6.1.1 Avoid Redundant code
Avoid leaving "dead" code in the program. Comment out variables that are not referenced and code that is not executed. To analyze the program, use the Program Analysis function in SE38 -> Utilities -> Program Analysis.
6.1.2 Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called.
Example:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
6.1.3 Case vs. Nested IF
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
6.1.4 Using the MOVE Statement
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
6.1.5 SELECT Queries
The performance of any ABAP program mainly depends on the ABAP Queries used in it. More optimum the queries , better the performance. Take care of the points mentioned nin the following sections while writing any ABAP queries.
6.1.5.1 Using all the keys in SELECT statement
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. The SELECT * command is to be avoided everywhere.
6.1.5.2 Fetching Single Record
If the entire key can be qualified, code a SELECT SINGLE not just a SELECT. If all the keys are not available, we should use SELECT UPTO 1 ROWS if we are interested only in the first record.
6.1.5.3 Avoid SELECT-ENDSELECT
Selecting data into an internal table using an array fetch versus a SELECT-ENDELECT loop will give at least a 2x performance improvement. After the data has been put into the internal data, then row-level processing can be done.
Example:
select ... from table <..>
 into <itab>
 where ...
loop at <itab>
<do the row-level processing here>
endloop.
6.1.5.4 Using Indexs
Use indexes wherever possible. Tune the Query so that optimum Indexing will happen.
6.1.5.5 Provide all the keys
Give as many keys as possible in the WHERE clause to optimize the database fetching. Use the Index fields in the first position to optimize performance.
6.1.5.6 Avoid INTO CORRESPONDING
Avoid using INTO CORESPONDING FIELDS of Table. Instead, explicitly mention the fields. Else, The Table Fields should be in the same sequence as the selection
6.1.5.7 SELECT statement inside LOOP
Do not write SELECT statements inside the loop. Instead, use the FOR ALL ENTRIES Command
Before using FOR ALL ENTRIES command, check that the
1. Corresponding Internal table is not empty. If the Internal table is empty, the statement will select ALL the entries in the Database
2. The Internal table is sorted by the Filed used in the Where Clause: This makes selection faster
6.1.5.8 Nested SELECT statement
Avoid Using nested SELECT statements. Instead, make use of different internal tables to fetch the data, and Use Nested LOOPS to read them.
6.1.5.9 Select Distinct
Whenever its possible avoid SELECT DISTINCT, instead select data into internal table, sort and use DELETE ADJACENT DUPLICATES
6.1.5.10 Use of OR in Where Clause
Do not use OR when selecting data from DB table using an index because The optimizer generally stops if the WHERE condition contains an OR expression.
e.g.
Instead of
 SELECT * FROM spfli WHERE carrid = LH
 AND (cityfrom = FRANKFURT OR
 city from = NEWYORK)
Use
 SELECT * FROM spfli WHERE (carrid = LH AND cityfrom = FRANKFURT)
 OR (carrid = LH AND cityfrom = NEWYORK).
6.1.5.11 Order By
ORDER BY will Bypass buffer. So, performance will decrease. If you want to sort data, it is efficient to SORT them in INTERNAL TABLE rather than using ORDER BY. Only use an ORDER BY in your SELECT if the order matches the index, which should be used.
6.1.6 Using the READ statement
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. The table needs to be sorted by the Key fields and the command READ TABLE WITH KEY BINARY SEARCH is to be used.
6.1.7 Hashed table
If the number of entries in the Internal Table is high then use Hashed Table with Keys to access the table.
6.1.8 Transporting
With READ or MODIFY Statements use TRANSPORTING
6.1.9 Using LDB
In order to improve performance in case of an LDB, individual tables can be excluded from selection. Under the section Table Selection in the Documentation of LDB the fields with proper description has been given those fields can be set in the application report at the time of INITIALIZATION or at the START OF SELECTION. This can enhance the performance.
6.1.10 Append Lines of
Whenever it is possible use APPEND LINES OF to append the internal Tables instead of using loop and then APPEND Statement.
6.1.11 Use WHILE
Use WHILE instead of a DO+EXIT-construction, as WHILE is easier to understand and faster to execute
6.1.12 DELETE <itab> WHERE
Use DELETE <itab> WHEREfor deleting records from an internal table.
e.g.
Instead of
LOOP AT <itab> WHERE <field> = 0001
 DELETE <itab>.
ENDLOOP.
Use
DELETE <itab> WHERE <field> = 0001.
6.1.13 Using WHERE clause in LOOP.ENDLOOP
Use:
Sort ITAB by NAME.
Loop at itab where name EQ SY-UNAME
Endloop.
Instead Of:
Read itab with key name = SY-UNAME.
L_tabix = sy-tabix.
Loop at itab from l_tabix.
If name eq bijoy
Endif.
Endloop.

Issue regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

Regarding text attachment in Email in ABAP program

Hello...
Need your expertise in one of the issues. Requirement is seems to be simple
but i am stuck up at this moment. i have refereed SDN with Several code but
some point its not giving the proper solution. So its a request to you please
do not provide any SDN link for reference as i am very much tried all of them.
please share piece of code.
Requirement : Need to develope one ABAP program, Email text attachment with Header line.thought its
very simple but still facing difficulties.
i have tried many code either its showing Data in single line without new line , in one of the Codes
data is coming in successive line but there is lot of spacing within Words means all alphabates are tab
separated. coud you please provide ,me the proper solution for this.
in one of the codes is working fine for excel but when Txt extension done data is not coming in successive line all
data is coming in single line.
Ex. Text file should contain 1 head and 4 colunns and Data size 50..
Thanks
Nishi

Hi,
Another option....
Some sample code using cl_bcs .
Note the use of cl_abap_char_utilities=>cr_lf .
FORM mail_1_prep_10
USING
    it_data         TYPE table
CHANGING
    ob_document_bcs TYPE REF TO cl_document_bcs .
DATA: txt_line TYPE string .
DATA: txt_data TYPE string .
* Create some text data .
DO 20 TIMES .
    txt_line = '' .
    DO 10 TIMES .
      CONCATENATE txt_line '|' 'some data 01' '|'   INTO txt_line .
    ENDDO .
    CONCATENATE txt_line cl_abap_char_utilities=>cr_lf INTO txt_line .
    CONCATENATE txt_data txt_line INTO txt_data .
ENDDO .
* Mail stuf....
DATA: it_solix TYPE solix_tab .
CALL METHOD cl_bcs_convert=>string_to_solix
    EXPORTING
      iv_string = txt_data
    IMPORTING
      et_solix = it_solix.
DATA: attachment_subject TYPE so_obj_des .
DATA: attachment_type TYPE so_obj_tp .
attachment_subject = 'Some text data' .
attachment_type = 'txt' .
TRY.
      CALL METHOD ob_document_bcs->add_attachment
        EXPORTING
          i_attachment_type    = attachment_type
          i_attachment_subject = attachment_subject
          i_att_content_hex    = it_solix.
    CATCH cx_document_bcs .
ENDTRY.
ENDFORM .                    "mail_1_prep_10
regards.
This is how I see it in my mail :

Creating abap program to develop and activate a global table type and global structure.

Hi friends,
I want to create and activate a global structure and global table type by coding in ABAP editor only. so can I do that anyhow.
Please help me.
Thanks in advance.

Thanks guys for your fruitful replies, as most of you asked the main purpose of my question, the answer is as follows:
in fact my purpose to do so is to create a function module that can fetch data dynamically from different database tables based on the codings in different abap program.
for example: in one abap program i am coding as follows:
tables: kna1.
types: begin of itab,
          kunnr type kna1-kunnr,
          name1 type kna1-name1,
          end of itab.
data: it_tab type standard table of itab,
         wa_tab type itab.
similarly in other program i am coding as follows:
tables: vbrp.
types: begin of itab,
          posnr type vbrp-posnr,
          matnr type vbrp-matnr,
          arktx type vbrp-arktx,
          end of itab.
data: it_tab type standard table of itab,
         wa_tab type itab.
so now for both programs i want to call the same function module and fetch data as required in relative programs as mentioned above. in that case how to create that function module?

ABAP program to make a Hierarchy flatfile structure?

Hi,
Is there any ABAP program by which we can make a flat file structure in the conventional format ? ( Nodeid,Infoobject,Nodename etc---)
Because here i just cannot make the flat file manually as the document i have is huge one, having somany nodes and levels that it is almost impossible to write down on a paper too!
Any suggestions?
Thanks,
Ravi

Hi,
I have used the following function modules to breakdown the hierarchy. You can write a simple abap program and download the heirarchy breakdown.
CLAF_CLASSIFICATION_OF_OBJECTS - this function module will return the class information for the hierarchy.
Use the internal table i_class (filled by the above function module) and pass the relevant fields to the FM CC_LS_GET_CLASS_HIER_STRUCTURE.
The entire hierarchy then becomes available in the table 'class_structure'. Use appropriate methods to download to the presentation ( FM WS_DOWNLOAD GUI_DOWNLOAD) / application servers (OPEN Dataset/Transfer Dataset/CLose dataset).

Regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

Regarding ABAP program to read and manipulate data from Excel file....

Hi,
I want to write a ABAP program which will read Excel file which has three columns viz: Col A, Col B and Col C.
If there is no data in Col B and Col C for a given record in Column A, then progam should print all those records on screen with write statement.
Regards,
Rajesh.

Hi
Check
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
begcol TYPE i DEFAULT 1 NO-DISPLAY,
begrow TYPE i DEFAULT 1 NO-DISPLAY,
endcol TYPE i DEFAULT 100 NO-DISPLAY,
endrow TYPE i DEFAULT 32000 NO-DISPLAY.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = filename
i_begin_col = begcol
i_begin_row = begrow
i_end_col = endcol
i_end_row = endrow
TABLES
intern = intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
After getting Records in INTERN TABLE You can loop it to check where columns B & C are empty and store them in another table .
LOOP AT intern.
IF INTERN B and C has value .
CONTINUE
ELSE .
MOVE THEM INTO ANOTHER TABLE ITAB .
ENDIF .
ENDLOOP.
THEN LOOP ITAB .
WRITE : ' '
ENDLOP .
Hope this Helps .
Praveen

Regarding Matchcode object in ABAP programs

hi experts,
we have Addon abap programs using Matchcode objects in R3 4.6C with OS unix.
1-I Would like to know whether the Sorting order of Match code values will change if we change OS from UNIX to solaris.
I heard that due to Locales, Sorting order for match code likely to get affected due to OS dependencies.
Please suggest me if its true how to solve this prob
Thanks.
Baasha.

Who tells you that??? The OS has nothing to do with the sort of match code values....Maybe but don't think so....Different DB Engines could make that.....But in my experience....That never happened...
Greetings,
Blag.

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

How do we call smartforms in abap program or web services

how do we call smartforms in abap program or web services
How many types of smartforms are there?
points will be rewarded

Hi
See this sample program
Using the fun module smartform is called from the program
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Reward points for useful Answers
Regards
Anji

Regarding structure of abap program

Similar Messages

Maybe you are looking for