Regarding suggestions for Subject -- Message subject cannot exceed 100 characters.

Hi,
feedback or suggestions --
when characters exceeds more than 100 in subject area then error shows that "Message subject cannot exceed 100 characters."
my suggestions would be if there is any word count at bottom then that will be helpul to keep the subject within 100 characters. it should reduce from 100 as user type the characters in sybject.
please update which will be helpful.
bye,
siva

When you replied on a post, the message subject will have "Re: " added to the message subject, causing it to exceed 00 characters. You will have to edit the message subject by removing some characters so that it fits within 00 characters.

Similar Messages

  • The database name cannot exceed 50 characters

    I am trying to create an offline copy of my BCM database in Outlook 2013. I have connected to my remote server which LeadershipSBSE\BCM and the database name itself is just LS. (I have shortened it as much as I can.) Despite these efforts, whenever I try
    and create the offline copy, it tells me the "database name cannot exceed 50 characters."
    I quite literally CANNOT shorten anything else. How can I get this to work?
    Thank you in advance.
    Veronica

    As mentioned above, the INSTANCE name that I am typing in is "LeadershipSBSE\BCM" and the actual DATABASE name that I am selecting is "LS". I started with much longer names, but have actually created a second SQL instance with a shorter name (BCM) and a
    new database with the name "LS". I quite literally CANNOT make this any shorter.
    I am using Windows 8.1 and Outlook 2013.
    I think I may have figured something out with regard to the error, though. My profile name was crazy long, since I was using a Google apps profile. When I switched to a different Outlook profile named "Outlook", I no longer got that error message. Now, though
    I am getting a "Database creation was unsuccessful" and in the Windows event log, I'm getting an Application error 1000 with these details:
    Faulting application name: wmiprvse.exe, version: 6.3.9600.16384, time stamp: 0x521590bf
    Faulting module name: svrenumapi100.dll, version: 2009.100.1617.0, time stamp: 0x4db1edee
    Exception code: 0xc0000005
    Fault offset: 0x0003a05f
    Faulting process id: 0x441c
    Faulting application start time: 0x01cef050aed27518
    Faulting application path: C:\WINDOWS\sysWOW64\wbem\wmiprvse.exe
    Faulting module path: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\svrenumapi100.dll
    Report Id: eca67711-5c43-11e3-be6e-14dae951ed82
    Faulting package full name: 
    Thanks.
    Veronica.

  • ORA-20171: WM error: Trigger Names cannot exceed 27 characters

    Hi All,
    while executing the following script :
    "EXEC DBMS_WM.EnableVersioning ('clasec_menu_role_map', 'VIEW_WO_OVERWRITE');"
    i encountered following errors.
    ORA-20171: WM error: Trigger Names cannot exceed 27 characters
    ORA-06512: at "SYS.LTDDL", line 457
    ORA-06512: at "SYS.LTDDL", line 1123
    ORA-06512: at "SYS.LTDDL", line 1107
    ORA-06512: at "SYS.LT", line 9024
    i am working on oracle 10g, please help me out of this problem.
    Vikas

    i have changed the trigger name but now error is diffrent.
    SQL> EXEC DBMS_WM.EnableVersioning ('clasec_menu_role_map', 'VIEW_WO_OVERWRITE');
    BEGIN DBMS_WM.EnableVersioning ('clasec_menu_role_map', 'VIEW_WO_OVERWRITE'); END;
    ERROR at line 1:
    ORA-20230: table 'CLASSICSECURITY.CLASEC_MENU_ROLE_MAP' failed during
    UndoEnableVersioning/DisableVersioning. Error:
    ORA-01403: no data found
    ORA-01403: no data found
    ORA-06512: at "SYS.LTDDL", line 457
    ORA-06512: at "SYS.LTDDL", line 1123
    ORA-06512: at "SYS.LTDDL", line 1107
    ORA-06512: at "SYS.LT", line 9024
    ORA-06512: at line 1
    vikas

  • Charges for text messages that cannot be received

    Looking at my Xoom usage online today I noticed that there were 5 text messages sent to the phone number of the line my Xoom is using.  But, as discussed in other posts here, the Xoom cannot receive or send text messages.  I called Verizon to turn off the text messaging feature on this line and the rep told me that the text messaging feature is requried for the Xoom line, and it cannot be turned off or blocked.  
    So watch your first bill very carefully, you will probably be charged $0.20 for each text message even though you could not receive it.

    If you are billed for text messages on the Xoom you can contact us and we will credit the charges.
    Thanks

  • How to display - Message Length more than 100 characters

    Hi,
    I am displaying a message string which gets generated dynamically. Which means I donno theolength of that. It may go upto 200 characters also.
    However, In message display, the number of characters have some limit.
    Could you please let me know, How can I achieve this?
    MESSAGE E000 with lv_string.
    Thanks,
    Sandeep

    Hi Srini,
    I have already 4 place holders. And one of the place holder will be populated dynamically which I mentioned above. And more than 4 place holders, it is not accepting.
    Could you please help me.
    Thanks,
    Sandeep

  • HT3275 Any other suggestions for the message the backup volume is read only

    I keep getting the message Time machine is unable to complete the backup because it appears the backup volume is read only.  I've tried the suggested repairs from apple for this but keep getting the same problem.  Any suggestions?

    The Master of the Time Machine, Pondini has extensive documentation and he mentions your particular problem in the following link.
    http://pondini.org/TM/C6.html

  • Suggestion for Text Messaging

    I too rely on reading my sons text messages and feel that as long as I am paying the bill my son has no privacy.  Sometimes I just want to look at the messages at my convenience and not by the availability....

    Thanks to the community members for your contributions.
    Hello cgh,
    Although there’s not a way for you to view the text messaging content unless you’re viewing it directly from the device you do have the option of viewing the text messages details on My Verizon. From here you can select your son’s mobile number and view what number the message was sent to or received from as well as the date and time. 
    DaisyP_VZW
    Follow us on Twitter @VZWSupport

  • Seebuger AS2 adapter for XI as sender for multiple messages

    Hi all,
    Has anyone managed to configure the Seeburger AS2 adapter for XI successfully to process multiple inbound message types.
    We have an issue here with inbound messages being received by the AS2 adapter. We currently have it configured for inbound deliveries which is working fine. The issue is that we would now like to send other messages as well. It seems the AS2 adapter only looks at the sender/receiver party combination to determine the correct sender agreement, but does not look at the message type which is a limitation. I have heard mention of a splitter module which can be used to distinguish between different messages and pass them to the correct sender agreement for processing, information on this is thin on the ground to non existent. What is the name of the module? Is it specified in your sender AS2 adapter with parameters? Is it wrapped as an adapter? How do you configure the module to split and pass specific messages etc... Any help on this would be much appreciated.
    Thx,
    Pete

    Hi Rudy,
    the Classifier/BIC/Splitter - Solution is mainly designed for EDI-Messages that cannot be handled directly by XI.
    IF you use pure XML-messages you should be able to handle it with XI-basic-functionality since this is what XI can handle itself.
    Depending on how different your XML-Messages are, the effort will be very small or a little bit bigger.
    In the ReceiverDetermination it should be possible for you to check whether certain XML-TAGs are existing or what the content for certain TAGs is BAsed on this information you can route the messages in a correct way.
    (Of course you might have to create  your own XSD for this containing the important TAGs of each message, so you can setup your Conditions)
    Btw. the Seeburger BIC-Adapter can provide also this functionality, but this also needs to be customized)
    Greetings
    Stefan

  • Changing Subject: Header for bounced messages

    Our current version:
    imsimta version
    Sun Java(tm) System Messaging Server 7.0-3.01 64bit (built Dec 9 2008)
    libimta.so 7.0-3.01 64bit (built 09:24:13, Dec 9 2008)
    Using /opt/sun/comms/messaging64/config/imta.cnf
    SunOS mmp-nhm1.its.utas.edu.au 5.10 Generic_138889-06 i86pc i386 i86pc
    I am trying to alter the Subject: header for bounced messages, especially mail bounced from our gateway servers for "User unknown" errors. The current Subject: header for such bounces reads:
    Delivery Notification: Delivery has failed
    I would like this altered to be, say:
    Delivery Notification: Remote SMTP server has rejected address
    or something similar. Now, I've read the documentation on managing status notification messages, but there seems to be no correlation between the files in ..../config/locale/C and the text being placed in deliery failure messages. For instance, the return_failed.txt file contains the text:'
    Your message cannot be delivered to the following recipients:
    %R
    Yet I can't see this anywhere in the bounced message. Nor any other text from any of these files.
    There also seems to be a lack of information on header manipulation in these files.
    Thanks for any help,
    Dave.

    brett_ac wrote:
    There also seems to be a lack of information on header manipulation in these files.The manipulation of the notification messages is documented here:
    http://docs.sun.com/app/docs/doc/819-4428/bgakm?a=view
    Unfortunately the use of the Subject override "$T" flag isn't documented for the NOTIFICATION_LANGUAGE mapping table (although it is for the DISPOSITION_LANGUAGE mapping table -- http://docs.sun.com/app/docs/doc/819-4428/bgalb?a=view).
    To replace the header for the "Delivery Notification: Delivery has failed" bounce messages I added the following to the top of the NOTIFICATION_LANGUAGE mapping table in mappings.locale:
    NOTIFICATION_LANGUAGE
    ! Change the subject for "Delivery Notification: Delivery has failed" messages
      failed|*|en*|*|*  $T$IIMTA_TABLE:locale/C/|Delivery$ Notification:$ Remote$ SMTP$ server$ has$ rejected$ address
      failed|*||*|*     $T$IIMTA_TABLE:locale/C/|Delivery$ Notification:$ Remote$ SMTP$ server$ has$ rejected$ addressSee how that goes (make sure to run ./imsimta cnbuild;./imsimta restart before testing).
    Regards,
    Shane.

  • "Access not allowed for subject: principals=[]" Common Issue with no Repose

    Hi all,
    When upgrading from 8.1 to 8.1 SP4 (we have seen the issue as early as SP2), there is an exception thrown when trying to start the server where our application is deployed:
    <pre>weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
    </pre>
    Our application creates an InitialContext using properties from a standard properties file, and when the "java.naming.security.principal" and "java.naming.security.credentials" properties are omitted, the server will start and deploy the application, but it naturally will not work.
    I have noticed that this issue has been brought up by several others:
    http://forums.bea.com/bea/search.jspa?q=%22Access+not+allowed+for+subject%3A+principals%3D%5B%5D%22&objID=&dateRange=all&userID=&numResults=15
    http://forums.bea.com/bea/thread.jspa?forumID=2058&threadID=200027601&messageID=200619947#200619947
    http://forums.bea.com/bea/thread.jspa?forumID=2051&threadID=200021662&messageID=200590642#200590642
    http://forums.bea.com/bea/message.jspa?messageID=200590569&tstart=0
    But have seen nothing resembling even a hint of a cause.
    Any suggestions that even get me going in the right direction would be appreciated.
    <pre>
    weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
         at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.wlsRun(SecurityHelper.java:623)
         at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.run(SecurityHelper.java:510)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.management.internal.SecurityHelper.isAccessAllowed(SecurityHelper.java:398)
         at weblogic.management.internal.RemoteMBeanServerImpl.private_setAttribute(RemoteMBeanServerImpl.java:430)
         at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanServerImpl.java:387)
         at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:741)
         at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:475)
         at weblogic.management.configuration.ApplicationMBean_Stub.setDeployed(ApplicationMBean_Stub.java:408)
         at weblogic.management.mbeans.custom.ApplicationManager.setState(ApplicationManager.java:593)
         at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:740)
         at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:501)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
         at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
         at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
         at weblogic.management.configuration.ApplicationManagerMBean_Stub.start(ApplicationManagerMBean_Stub.java:677)
         at weblogic.management.Admin.startApplicationManager(Admin.java:2821)
         at weblogic.management.AdminServerAdmin.startApplicationManager(AdminServerAdmin.java:624)
         at weblogic.management.Admin.finish(Admin.java:2299)
         at weblogic.management.AdminServerAdmin.finish(AdminServerAdmin.java:458)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:971)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
         at weblogic.Server.main(Server.java:32)
    </pre>

    For others who have received this error, I'll post what I think has turned out to be the cause.
    Refer to
    http://e-docs.bea.com/wls/docs81/jndi/jndi.html#471919
    Which says:
    =====
    When you create a JNDI Context with a username and password, you associate a user with a thread. When the Context is created, the user is pushed onto the context stack associated with the thread. Before starting a new Context on the thread, you must close the first Context so that the first user is no longer associated with the thread. Otherwise, users are pushed down in the stack each time a new context created. This is not an efficient use of resources and may result in the incorrect user being returned by ctx.lookup() calls.
    =====
    Our application caches the Context created, and that Context is used by other objects to perform lookups. Prior to Sp2, this caused no issues when including the username and password as part of the properties passed to the InitialContext constructor.
    I presume that closing the Context after it has been used would be the proper fix for this, but right now this Context is used in too many places once it is created. I was able to combat the issue by removing the username and password properties (java.naming.security.principal & java.naming.security.credentials) from the properties file. It seems to work as expected.

  • Cannot see context menu for XML messages with Safari and Google Chrome

    Hi All,
    I am unable to see Context menu with the option of Create, Edit, Delete etc. for KM messages. This problem persists with Safari, Chrome and IE9 browsers. This thing works fine on IE7 and IE8 browesrs.
    On clicking  History and Options buttondoesn't perform any action i.e. we cannot see the list of options when clicking on those. This problem also persists with the above mentioned browsers.
    Also, with IE9 , I am unable to create New message when clicking on New button. The XML form doesnt open on the button click.
    The portal version I am using is EP 7.0.
    Can someone help me out with this?
    Thanks a lot in advance.
    Regards,
    Archana

    Hello Archana,
    You should check the PAM to see if your browser is supported with your current EP verison.
    http://service.sap.com/pam
    Regards,
    Lorcan.

  • Cleartune has updates available, but I keep getting a message saying "cannot connect to Itunes store"  all other updates work just fine?  The one app I paid for is the one that for some reason will not work.  How can I upgrade without buying it again?

    I loaded cleartune a while back, there are upgrades/updates available, which I'm trying to load.  When I choose update, it asks for my password, which I provide and I get a message saying "cannot connect to Itunes store"  I have many other apps I've loaded and upgraded just fine.  However this one, the one I actually wanted bad enough to pay for, is wanting me to delete it and buy another copy.  How can I update Cleartune without buying it again? 

    Hi all,
    This is a very interesting situation. I did try to update one of my apps within itunes as was suggested. That worked !!
    But then I noticed that I had 2 different logins that I must have created over the years. I almost forgot. I have a apple ID and an AOL ID. It seems that I purchased (actually they are all free) some apps with one ID and other apps with the other ID. I must have done this by accident.
    So when I log out of one of the IDs on my Touch and then log in with the other ID, I can update the apps.
    It seems that something changed on Apple's servers. It seems that until recently I was able to update free apps regardless of what ID I originally bought them with. Now it seems that's not the case. Apple must check this now.
    Now that I know what the issue is, I'll make sure I use one ID all the time.
    Thanks,
    Steve

  • I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions? Thanks

    I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
    Thanks

    email ituens at expresslane.apple.com and they will help you for nothing

  • How to get message Target value exceeded for value contract in consignment

    Hi Gurus,
    I have created a value contract in consignment process.
    When the TOTAL VALUE of the release orders exceed the TARGET value of the value contract, system is NOT alerting me with message "Target Value Exceedded".
    In normal value contracts, system throws error message while creating release order if target value is exceeded.
    How such message can be generated in case of consignment process?
    Is there is any configuration involved for item category 'K' for this requirement?
    Thanks in advance,
    Regards,
    Sastry

    Hi,
    Thanks for the reply.
    Those messages are already configured and they are working fine for my normal contracts.
    I need such messages for value contracts in consignment process (item category 'K').
    As there is  no net price in consignment PO, such messages are not generated even though required messages are already configured.
    Is there any other thing I need to do for CONSIGNMENT process
    Regards,
    Sastry

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

Maybe you are looking for