Regarding table T006 "Message: Unit CDM is not created in language EN"

Hello Experts,
There is an issue in the T006 table.
With the SE16 transaction if I list all the unit existing in the table T006, I found the unit CDM.
If I list only the unit CDM, I have the error message : "unit CDM is not created in language EN".
If I list all the unit with EN language in the table T006A, I found the CDM unit.
How could you do to avoid this error message.
Thanks & regards
Tushar.

Hello Tushar
Check with tcode CUNI for definition of UOM. You need to chek the said UOM defined under Dimensions, ISO or UOM for language EN.
Amol

Similar Messages

  • Unit ST is not created in language EN

    Dear all,
    we are using SRM 5.0 in the extended classical szenario.
    Here we are facing a problem in transaction BBP_POC (Process PO):
    When we try to add a new line to a PO we get the following error message "Unit ST is not created in language EN".
    Although the first line was created with ST in EN.
    Afterwards it is not possible at all to change the PO. We get the error message in every screen.
    Thanks and regards
    Achim

    Hi
    <b><u>See this pointer / links below -></u></b>
    <b>Note 781669: Correction of BBP_CND_CUSTOMIZING_CHECK</b>
    Please maintain your ISO Code for ST in Tcode CUNI, the ISO code for ST supposed PCE and tick the primary code. After you maintain the ISO Code, try to retransfer the PR again from SMQ1, and if there's still error, check to SRM--Tcode SLG1, and see what's the error.
    <b><u>Related link -></u></b>
    <u>Re: Incorrect status in pricing - SRM server 5.5</u>
    Re: PR transfer error to SRM " Measurement unit ST has no ISO code"
    Do let me know. Hope this will help.
    Regards
    - Atul

  • Error 'Unit ST is not created in language EN...' at conversion exit

    Hi
    When i try to load a flat file i have this error message :
    Error 'Unit ST is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field SALES_UNIT record 1, value ST)
    My source has unit field. in the field in have sometime PC or ST  --> ST is coming from BW
    But when i load the file it gives the error for ST value.
    In my datasource i have the correct CUNIT conversion routine apply on the unit field
    Thanks for your help
    Cyril

    Yes this value is not maintained in T006 table. that's why i have the problem.
    So how to solve it.
    I have an ETL tools which read my DSO tables and it extract ST so i need to convert it this value exist in BI (internal code of PC)
    Cyril

  • Unit JHR is not created in language EN

    Dear All,
    While creating billing document getting error 'Unit JHR is not created in language EN'. I checked all MM data, we did not update JHR unit for materials still we get error.
    I checked JHR unit by using Transaction code 'CUNI'. JHR is available under dimension 'TIME'. JHR is available in data base tables T006 and T006A still system throws above error. Particularly for UOM 'JHR' getting above error.
    Please provide the solution.
    Thanks and Regards
    Makarand

    hi Makrand,
    Go to CUNI. now in this follow the menu in first screen as
    GO TO --> Translations --> Unit of Measuremnts
    here select EN to EN

  • Error '' Unit IN2 is not created in language EN"

    Hi all, I have created new material using UoM as "2 (square Inch), when i am doing excise Invoice for the same material it is ginving me error that '' Unit IN2 is not created in language EN"  while it is allowing me to do GRN without Exc Invoice.
    i have tried to CUNI , there is no entry showing for  unit of measurement for "2 or IN2 . i tried to maintained is is giving message
    'Unit of measure IN2 already exists'  if i checked table t006A it is showing the Enrty in EN & DE both language,
    i have also teried
    Goto --> translation --> unit of Measurement  but not sure what to do there, i have save confirm translation for the "2 there but still same problem is appearing.
    Please Guide  Any helpful ans will be awarded full marks. thanks

    In what language did you create this new unit?
    when you start CUNI, in the initial screen choose from menu GOTO > Translation  to translate your unit into english language.

  • Unit KG is not Created in language EN-- Error in MMBE

    Dear Guru,
    When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.)
    After Executing the report, at header level when i am chaing Unit of Messasurement  ( Ex. to KG) system giving Error message
    <b>Unit KG is not Created in language EN</b>
    But when i am running mmbe by giving Unit of Messasurement KG and excuting ..its shows the report.
    Y i am getting error message after excuting report and changing the UoM.
    Plz guide me.
    Regards,
    Venkat

    Hi,
    As with most SAP messages it is always a good idea to trust what it is saying.
    The system is telling you that KG has not been created in the English language.
    Go to transaction CUNI to check the settings.
    Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
    KG should be there and should have an English description (the message said it was not there for EN)
    If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then  KG?)
    Steve B

  • Unit STD is not created in language EN

    Hi everyone,
    During uploading of AP transactions,we got this error:
    Unit STD is not created in language EN. I've checked tcode SE38 and tried to search for STD in language EN but it gives me the same warning/information. I also run RSDMD_CHECKPRG_ALL and it says that characteristic STD is not active and I need to activate that characteristic. How am I going to do that? Can somebody teach me how?
    Thank you,
    April

    Hi April,
    Actually, you need to create a STD UNIT, not a characteristic.
    You may see here how to do it:
    Re: 0Unit / se16 / CUNI
    Best regards,
    Eugene

  • Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSI

    Hi Experts,
    I'm loading Flat File data of 1.5 Lacks record in to Cube. I'm encountering this error in InfoPack monitor.
    Can anyone help to resolve this please.
    Error 'Unit 1 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 6628, value 1)
    Thanks

    It got resolved by checking the internal in the field selection tab of Datasource.

  • Unit *** is not created in language EN - POSDM in CAR 1.0

    Hi all,
    I am getting the error message "Unit *** is not created in language EN" (Message no. BM305), while creating POSDM transaction.
    I did set up and loaded data into BI components 0MATERIAL, 0PLANT, 0RPA_MEAN, 0MAT_PLANT & 0RPA_MARM.
    I have verified that tables T006 & T006A are having Unit of measure 'EA' with language English.
    When I used Tcode 'CUNI' and gave source and target language as EN. I am getting error message 'Could Not Save Target Text'. But this would not be an issue I guess, because I have verified a working system source/Target were not maintained there.
    Please let me know if any further setting to resolve the issue.
    Thanks,
    Venkatesan

    Thanks Vikrant for your reply.
    Actually I have used flat file upload, and ensured that the Infoobjects are mapped properly.
    When I use POSDM Workbench, I am getting error like 'Unit EA is not created in language EN'. T006/T006A are having UoM in language EN. Is any other common setting I am missing here?
    0RPA_MARM - has only attributes? Do I need to upload TEXT for this object?
    Thanks,
    Venkatesa

  • CUNI - Creation of new unit - error Unit is not created in language EN

    Dear BI community,
    We have created via transaction CUNI a new unit. Everything looks fine - it appears in the unit of measurement and the conversion works.
    The problem only occurs when we check it in table T006A by example. When looking for it we get the following error message
    "Unit is not created in language EN".
    We have tried the "translation" option of CUNI but when we select another from language than EN we get not value.
    Any idea?
    Thanks,
    Rodolphe

    Hi All
    We have the same issue.
    Please let us know how could you fix this issue.
    Thanks

  • Unit CS is not created in EN error

    Hi Gurus,
    After activating the datasource and trying to preview the data I got the ff error:
    Unit CS is not created in EN
    Can anyone pls help how to go round this issue.
    Also I would be grateful  if   someone can help me to create a routine to multiply two fields/infoobject
    and put the result in another InfoObject. Steps in creating the transformation and sample code will be very much appreciated.
    Thanks.

    hi anil,
    the message indicated you haven't that unit value in t006a. from your previous posting, you do prefer upload to 0unit via flat file rather than maintain with transaction CUNI. have you successfully upload these unit master data to 0unit ?
    hope this helps you. if it doesn't work go to in BI go to source systems tab. and select your source system -->Transfer Global Settings.
    coming to your another query multiplying the two infoobjects. what you have to do create another info object- in the transformations use formula for the newly created info object-  you have multpliplaction function available. multiply the objects you want to.
    example-  if you want to multiply netvalue and tax.
    create new infoobject in the target as 0GROSSAMT.
    Formula is 0GROSSAMT = NETVALUE*TAX.
    thanks = points
    get back to me if you are not clear
    regards
    vadlamudi

  • 'unit STD not created in language RO'

    Hi there everyone
    system outputs error message: 'unit STD not created in language RO' while loading the cube YSD_C03 (transaction SM37- in job log). (The loding process ends with error.) Why is that?
    the same message or the like appears in transaction 'Monito for qRFC' in source system, for Data Source : 2LIS_13_VDITM, on the bottom of the screen.
    Thanks for taking the trouble!

    Hi,
    Seems the unit is not maintained for the language Romanian in the source system.Nut you are getting some data in the R/3 transaction data for that.
    just check the table T006A and see if this unit STD is maitained against the Romanian language or not??
    May be you can ask your R/3 team to create it or change the document.
    Thanks
    Ajeet

  • Unit *** is not created in language

    Dear all,
    in SAP CRM WebUI when I'm trying to create ERP Sales order from ERP Quotation in a follow up process I get the error "Unit *** is not created in language EN".
    CUNI settings are OK in both ERP and CRM systems.
    In a web page dialog when I want to confirm/choose the items to get copied into ERP Sales order I get the item shown in as 1 *** (instead of 1 PC - piece). When I confirm, in the next step system raise the error message.
    Same scenario happens on all languages.
    Any idea how to solve this is most welcome.
    Best regards.
    Hrvoje

    CUNI setup (units of measures) in both systems is equal and seems OK.
    Creating ERP sales order from reference to ERP quotation in ERP itself is working with no problems.
    Best regards,
    Hrvoje

  • Unit *** is not created in language EN

    Hi,
           In ME22N when I tried to create a service line item directly (with out referring to any reference document) by providing the values I am getting an error message 'Unit *** is not created in language EN'. Even though I mention the correct UOM values for screen fields (MEPO1211-MEINS,MEPO1211-BPRME).
            I couldn't find where it is replacing the UOM value with '***' and then calling the conversion exit for Unit and triggering this message. Did anyone encountered this message. Once this message pops-up there is no option to get out of the screen (only by using /n). Please suggest me how we can fix this issue.
    Regards,
    Bhanu

    Hi,
    Go to transaction CUNI.
    Select the Unit of Measure from the drop down list and check the entries for UoM's.
    Check for the entry with an English description.
    If the above entry is available, then check for the case sensitivity of UoM.
    also,
    GO TO --> Translations --> Unit of Measuremnts
    here select EN to EN
    This may help u
    Regards,
    Rahul.

  • Unit not created in language EN

    Hello,
    When loading a flat file, I receive the following error:
    Error in conversion exit
    CONVERSION_EXIT_CUNIT_INPUT
    So then I checked the units of measure in my flat file against the T006A table via SE16 in BW.  When I looked up some of the units of measure, I get the following error:
    Unit is not created in language EN.
    Question:  How do I create the unit of measure in language EN?
    Thanks,
    George

    Neither of the suggested solutions worked. 
    I ran RSDMD_CHECKPRG_ALL from se38 for 0BASE_UOM and 0UNIT.
    I also removed CUNIT from the column CONVE which is next to the UNIT column.
    I am still receiving the same errors as before.
    Any other suggestions?

Maybe you are looking for

  • How get all components from form Jdev10.1.3.4

    hi I have a form on her field is not related to VO. Pagedef empty. each element has the id and Binding. <af:inputText label="#{r['questionnaire.surname']}"                               required="true" id="surname"                               bindi

  • The only wrong thing I see in my iPod. Can anybody help?.

    I love my fifth generation iPod, but I see it has an important fault: It can't remove pics and/or songs by itself. It has to be connected to iTunes to do it, Am I right?. I've got other mp3 players and they all allow to remove files directly from the

  • Want to Book bonds and Repos on a yield not price (ftr_create screen)

    I am implementing sap treasury in South africa and i see SAP TRM is based on the european markets which trade on the price but South Africa trades on the yield, how do i capture a bond on a yield not on the price." We want to do this on ftr_create or

  • Why do the colors of my display change when opening applications?

    Something is causing my display look like it has a blue cast whenever I open applications like photoshop, google chrome, preview, etc. It's really annoying and it looks like absolute garbage. I'm a photographer and I can't get any work done if my dis

  • Quicktime Movies Problem

    I just noticed that when I click on a Quicktime movie file in my hard drive, I get an alert that says - "Windows - No Disk. There is no disk in the drive. Please insert a disk into drive". I can't get rid of the alert, and when the Quicktime movie vi