Regarding table update

Hi all,
I am doing updation of knvv by a report program.
I have entered 50 customers .
i ran it in background.
for the 1st time 8 customers are processed.
again without changing anything, i executed the program with the same 50 customers.
now the remaining 42 customers are processed.
i dont understand , why this is hapening.
please hep me in this.
thanks.

The Problem it seems may be arise due to logic... it will be quite helpful if u pass the code..
or the other possible are is urr inactive prog.. u may have changed the prog but have nt activeated .. it.. so when u run the prog tru Tcode it ran the previous active version. but when u press F8 or right click and execute then the temp active version is created and executed..
No Rewards Plz...

Similar Messages

  • Problem Regarding TABLE updation for Scheduling Agreement

    Dear Experts,
    We have noticed that whenever we are releasing any Delivery Schedule for a line item against a Scheduling Agreement the table field ABART(Scheduling Agreement Release Type) in table EKET is not getting updated,but the same field or column in TABLE EKEH or EKEK is getting updated.
    Please advice what is the problem and how to resolve the same.
    Regards,
    Soumick

    Hi,
    The scheduling agreement schedule line is not firmed physically:The fixing indicator (EKET-FIXKZ) is empty for this schedule line.
    This can be checked in Transaction ME39 or with Transaction SE16 for table EKET for the corresponding schedule line.
    In the MRP group of the corresponding material, it is set that only transferred scheduling agreement schedule lines should be regarded as firmed (Transaction OPPR, firming scheduling agreement, Firm transmSLines [Field XFAT1]).
    In this case, only such scheduling agreement schedule lines are firmed which were transferred by message transmission through purchasing to the vendor. (see also the F1 help for the field).
    However, the system displays all scheduling agreement schedule lines as fixed in Transaction MD04 within the release period and assigns them with a star ('*'), that is, this applies also scheduling agreement schedule lines with a transmitted quantity of 0.
    In contrast to the above, these schedule lines are not displayed as fixed in Transaction MD05 or in the planning with 'Display result'.
    Note 354164 explains this system behavior.
    For the planning, the transmitted quantity is considered as fixed if this is correspondingly set in the MRP group of the material.
    If the transmitted quantity was updated correctly, it should be contained in field AMENG of table EKET.
    By using Transaction SE16 for this table and the corresponding schedule line (scheduling agreement number EBELN, item EBELP, schedule line ETENR), you should be able to find out....
    transmitted quantity was written to the database and a fixing can be carried out correspondingly in amount of the transmitted quantity or whether no update of the transmitted quantity occurred (see below Notes 82169, 117093, 134356).
    Solution
    First, the system behaves as intended.
    It should be checked whether the function, which is controlled by this indicator, is actually wanted this way (to firm only scheduling agreement schedule lines which actually have been transferred).
    In addition, problems can occur in purchasing when the printed quantity is updated (AMENG).This symptom can especially occur after you have upgraded from a release < Release 4.0A to a release > Release 4.0B.
    In this regard, see the related Notes 82169, 117093 and 134356.
    Regards,
    Udaya.

  • Regarding table updating

    hello friends.
    Is their any table where we can find the list of transactions which were navigated by the user.
    I know that we can see the list of Tcodes entered only when the user enters the Tcode and saves the data.
    but know my requirement is i wanna get the data of the user and the list of Tcodes entered by the user even if they have not saved the data.
    please help me

    Hi Vamshi
    try this links, it will be helpful to u.
    Check this link for creating a transaction code for a TM
    http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
    Please go throught below link ..... it was given with screen shots of the T.code Creating for the table after the maintaince view had been created ......
    http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    reward if help.

  • Query regarding COSP updation

    Hi,
    Can anyone suggest what would be the best way to know when a table (standard) is getting updated . Upon searching the where-used list of the table i found large number of programs using the table which would be dificult to pinpoint any program .
    The table is COSP (Cost Totals for External Postings)
    Answers will be rewarded.
    Regards,
    Rajesh.

    Hi,
    You can do that by going to tcode ST05.
    Select the check box "QL TRACE ".
    Then Click "ACTIVATE TRACE".
    Then run your program.
    Then come back to ST05.
    Click " DEACTIVATE TRACE".
    Then click "DISPLAY TRACE".
    It will give you a thorough analysis of all your select query and other SQL statements. and inturn you will be able to find the various tables updated as well.
    Reward Me Points
    By
    Pari

  • Problem in MSEG Table updation

    Hello All,
    The problem is related to MSEG table updation after Stock Transport Order  (STO) is done between Manufacturing plant & Depot. The problem is described below with an example.
    In case of STO the Supplying Plant or vendor is SP02 and the Receiving Plant or the customer is RP15.in the STO under the shipping tab for Customer the system is showing RP15 and under the Delivery address tab for Vendor the system is showing SP02.
    While during PGI when the material document is generated when we check the MSEG table two line items have been generated where  we found that the field WERKS contained SP02 & RP15 against which the feld XAUTO is showing blank space & X symbol respectively.But in case of both LIFNR & KUNNR fields it is showing blank space, which indicates that both the vendor & customer  fields are not getting updated in the MSEG table.
    Now I want the system to pick up the data for KUNNR field (in case of XAUTO is X) also in the MSEG table i.e. RP15 should also be displayed in the MSEG table.
    Is there any configuration to attain my requirement?
    Looking forward to some valuable suggestions.
    Thanks & Regards
    Priyanka Mitra

    the ADRx tables are central tables that are used from various transactions in SAP.
    e.g. from customizing, master data maintenance, transactional data, such as purchase orders and sales orders.
    use the ADRNR from ADR6 table and then lookup an entry in table ADRC to find and hint to its origin  field ADDR_GROUP

  • Calling Batch input from Web Dynpro - any alternatives for table updates?

    Hi!
    I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
    My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
    I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ?  We are not supposed to do direct table updates.  
    Anyone who have struggled with the same issues and found a solution??
    regards, Tine

    Hi,
    as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
    Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
    Thanks,
    Chandra

  • Tables updating for atransaction

    Hi All,
       i wnat to know is there any transaction code or program to know the tables updated for a transaction.
    we have a transaction called PPOM and FS00 ,i want to know which tables are updated when i create new records for these transaction codes.
    With regards,
    kiran I

    Hi,
      You can check tables CDHDR and CDPOS tables.
    You can check the modified tables, values, by which transaction does this modification has been done.
    Give current date to check. As these are cluster tables, it may take some time for retrieving data.
    CDHDR - header details
    CDPOS - item details
    Regards,
    Sailaja.
    Dont forget to reward points, if answer helps you.
    Message was edited by: Sailaja N.L.

  • Tables updated while creating order, before saving

    hi friends,
    Please provide list of tables updated while creating the order, before saving it.
    regards,
    vandana arora

    Hi
    The following tables get updated
    VBBE - Sales Requirement
    VBLB - Release Order Data
    VBAK - Sales Document Header
    VBPA - Partner Table
    VEPVG - Delivery Due Index
    VBAP - Sales Document Item Data
    VKDFS - SD Index: Billing initiator
    VAPMA - SD Index: Order Item by Material
    VAKPA - SD Index: Order Item by Partner Function
    VBEP - Schedule Line
    VBKD - Sales Doc: Business Data
    VBEH - Schedule Line History

  • How downtime can be reduced for setup table update.

    Hi;
    Can anyone tell me various ways to reduced system downtime for setup table updates.
    thanks
    Warm Regards
    Sharebw

    Hi,
    You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
    try Early Delta Initialization
    With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
    Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
    You cannot run an initialization simulation together with an early delta initialization.
    hope this link may make you clear about early delta init
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
    thanks,
    JituK

  • Which are the tables updated in SRM and R/3 System for SC created?

    Hi,
    I want to know which are the tables updated in SRM system and also in R/3 system, when a Shopping Cart is created. Also how do i get the PO number for the Shopping Cart created.
    Thanks.
    Regards.
    Rahul

    Hello Rahul,
    All list of tables for eg. SC You can find in transaction BBP_PD on SRM side.
    These tables are (SRM):
    - CRMD_ORDERADM_H - for Header (Business Transactions Header)
    - BBP_PDHGP - Business Transaction Purchasing Information
    - CRMD_ORDERADM_I - for Item - Business Transaction Item
    - BBP_PDIGP - Business transaction item-Purchasing information
    - BBP_PDBEI - Backend Specific Item Data
    On R/3 side:
    EBAN - purchase requisition
    EBKN - purch. req. account assignment
    Regards,
    Marcin Gajewski
    please reward points for helpful answer

  • RAISING AN EVENT WHEN DATABASE TABLE UPDATES

    hi all,
             i want to raise an event when database table updates.For eg : if a price of a material has been changed then i have to raise an event and run the abap program in back ground.i know transaction SM62 to create event, i dont know about transaction SM64. please give me the procedure how to solve this problem. i dont know work flow. please give me a sample code how to raise event.
    thanka and regards
    suresh

    Hi Suresh
    It is important to understand that the SAP architecture abstracts the database from the application.
    I think that you should look for ways that the application triggers an event when an update has taken place, rather than the DB.
    Two ways of doing this that spring to mind are change pointers (for the ALE interface, see menu SALE) and Business Transaction Events (various things including CRM integration, see menu FIBF).
    The latter works very well for sending prices to CRM when they change. I am more familiar with this than ALE so I will discuss it.
    If you go to menu FIBF and then follow menu path Environment -> Info System (P/S), and then run the report for event 00503301, you can find documentation and a sample function module that you can copy.
    Once you register your new function module in the event tables then it will be called when prices are changed.
    Cheers
    Dom

  • Wrong VBAP table updation

    Hi
    Facing a problem with wrong VBAP table updation.
    Sales order shows Business Area" A " at both header and Item Level but in VBAP table the business area updated is " B ". can't understand why it is happening.
    Changelog doesn't indicate anything
    Thanks and regards
    Nikhil

    Hi,
    Can you check how the business rule that is assigned at SPRO-> Sales and distribution -> basic functions -> Account assignment/Costing -> Business area account assignment?
    Regards

  • Table Updation through Workflow

    Hi All,
              I have a scenario in my project in which a workflow is to be triggered when an entry is made in a table.
    Now this workflow has to read some data from some tables and then update some other tables.
    My doubt is it possible through workflows to update the tables? If yes is it advisable.Also how will the
    updation happen? Should methods for updation will be written in BO methods? Or should a task be called
    which does the same.
    Please suggest,
    Saket.

    Hi Saket,
    Yes it is possible!
    To trigger workflow from table updates you can use table level events. Refer to
    Re: WorkFlow when Data is changed in Table or program
    Also you can update a table from a workflow. To do this, create an Activity step in workflow. In this, you can call a BO method. This BO method would store the code to update the database table required.
    Just take care of the bindings between the method -> task -> workflow container.
    Hope this helps!
    Regards,
    Saumya

  • Table updation through Visual Basic

    We are not able to update employee master table which has 73 columns. The problem is it is not allowing to update after certain number of columns say 50 columns. This is occuring only thru VB and not in SQL (i.e thru instert syntax).
    Can anyone tell what is the solution?

    Hi Saket,
    Yes it is possible!
    To trigger workflow from table updates you can use table level events. Refer to
    Re: WorkFlow when Data is changed in Table or program
    Also you can update a table from a workflow. To do this, create an Activity step in workflow. In this, you can call a BO method. This BO method would store the code to update the database table required.
    Just take care of the bindings between the method -> task -> workflow container.
    Hope this helps!
    Regards,
    Saumya

  • BCALV_EDIT_03 - Need the table update function

    I am fairly new to OO programming and have worked through the various sample programs. I am currently using BCALV_EDIT_03 and _04 to write a table maintenance program.
    I kind of have figured out how the delete and insert function works but unfortunately in sample program _03 the final table update function is missing.
    What I am after is that I get all the changed records from the grid and update the external table just with those records.
    Could somebody post some sample update code that I could check out?
    Thanks in advance.
    Gerd

    Table update as in, database table update or ALV table update ?
    ALV Table update will be done automatically, in case you have used the method : set_table_for_first_display
    As you also quote that you are checking out BCALV_<b>EDIT</b>_03, I will just clarify this point, all changes made to the table are triggered by the EVENT DATA_CHANGED and this event has the necessary fields, from which you can come to know which rows and what values have changed. You need to use this DATA_CHANGED event and update your internal table. This is then shown in SET_TABLE_FOR_FIRST_DISPLAY in PBO.
    In case you are talking about database update and if it is a custom table, then you have to use the direct update.
    In case it is a SAP table, you might let us know which table it is, and probably some of the experts here can let you know the Function Module, BAPI or any method of a class to use.
    In case you need a good tutorial help, you can find it in Serdar Simsekler's
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/an easy reference for alv grid control.pdf
    Let me know if I am way tangent here or I could be of help to you.
    Regards,
    Subramanian V.

Maybe you are looking for