Regarding TCODE version change..
Hi friends..
I need to list out all the obsolete tcodes.
for example
instead of ME21 now we r using ME21N
i want to list out all the tcodes like this.. where the informations are stored..
if anyone have anyidea.. send reply..
Thanks in advance
Gowrishankar
Hi
check this
Check this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Refer this link for more details:
Delta between 4.7 to ECC6.0
For functional differences please check out the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/
to know the differences in each release
Here is the link for the same
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
http://service.sap.com/releasenotes
Check this link ... this link will definitely explin u clearly the difference between the two versions...
http://www.stonewayinc.com/clients/sap/bestoftour/presentations/SAP_BOT_2_Furlan_IBM.ppt
See this weblog:
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
http://www.sapfans.com/forums/viewtopic.php?p=897186&sid=b1019a8384996953156f5a70692576b1
Regards
Anji
Similar Messages
-
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
Hi All,
Please let me know if there is any standard report which could fetch me the following details:
1. PO changes line item wise with old & new values
2. PO version numbers for the changed PO's.
Thanks,
Sourabh KothariHi,
Ask th ABAPER to develop a report or u can go to tables
T Code se16 and table name
CDHDR - Header Change
CDPOS - Item Change
EREV - Version Change
or use aut10 T code also
this may help u
Regards,
Pardeep Malik -
How to get the version changes programatically in ItemCheckedin event
Hi,
I am creating a custom version history page.
I have a requirement were I have to capture the changes after file check-in and display it in the custom page.
Is there anyway to get the version changes programatically after the file has been checked-in?
Is is possible to get the current version and previous version in ItemCheckedin event
and get the version changes?
Thanks in advance,
dhijitHi,
As Dimitri said, we can use ItemCheckingIn event to achieve it.
The following code snippet for your reference:
public override void ItemCheckingIn(SPItemEventProperties properties)
base.ItemCheckingIn(properties);
int beforeLevel = (int)properties.BeforeProperties["vti_level"];
int afterLevel= (int)properties.AfterProperties ["vti_level"];
if((beforeLevel==255) && (afterLevel==1))
// This is a major version that is being checked in . . .
int majorVer= properties.ListItem.File.MajorVersion+1;
Best Regards
Dennis Guo
TechNet Community Support -
Hi,
Is there any FM using which we can change the Version of Purchase Order in SUS.
Please advise.Hi,
Ask th ABAPER to develop a report or u can go to tables
T Code se16 and table name
CDHDR - Header Change
CDPOS - Item Change
EREV - Version Change
or use aut10 T code also
this may help u
Regards,
Pardeep Malik -
Version Change in User Exit , Customer Exit, Screen Exit
Hi All,
If Version change then whether the user exit, customer exit & screen exit will remain same? or what needs to be done for that?.
Regards,
AbhijitHi,
as per my knowledge there is no effect in the user exit ,in generally when version change the screens are chenges for particular transaction not the user exit .
Regards,
Madhu -
Regarding PO version to be created before output
Hi,
I have version managment active in my all document types for PO.
But the problem is user changes PO in ME22N, no version is created until output message is taken in ME9F. I wan that after the final release of PO, if any body changes PO using ME22N, new version should authomatically created. How can i do this?
Regards,
KalpeshHi
Version mangement is used for controlling document changes and recording them appropriately.
Unless you process the out put Version management will not be effective.
Thats the standard application for version management.
You cannot get the versions created unless the output is processed, no work around for this.
Thanks & Regards
KK -
Plz send me material for version change for 4.5 to ecc6.0
hi experts,
currently i am working in upgradiation project from 4.5 to ecc6.0,
i am new for this one plz send me some material for version change,
and give me suggestions what r the main changes from upgradiation from 4.5 to ecc6.0
regards
madhuHello Madhu,
I have started by our upgrade project with this links:
[Unicode Technology|http://service.sap.com/unicode@sap] (SAP Service Marketplace; PW necessary)
[ABAP Development in Unicode|http://help.sap.com/erp2005_ehp_03/helpdata/EN/79/c554dcb3dc11d5993800508b6b8b11/frameset.htm]
Peter -
hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date
Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
GLMAST01: Receiver exists , No filters , No conversion , No version change
Hello All,
I have explored forum for related messages and couldn't find the reason for IDOCs getting stuck in ECC with error as "GLMAST Receiver exists , No filters , No conversion , No version change" Status 30.
We executed program RBDSEGLM and 1900 IDOcs were selected, 1100 went successfully to SAP PI system with status code as 03 but 800 got stck. When I run these IDOCs using BD87, WE19 or report RSEOUT00, they are sent successfully.
Experts, please share views on reason behind IDOcs being stuck in ALE layer with status as 30 and the possible break-fix solution to avoid these.
Thanks!
Best Regards
PrashantHi Prashant,
Idoc Status 30 means--IDoc ready for dispatch
Also check in your partner profile under the outbound parameter for your message if the output mode is set as Transfer Idoc Immediately or Collect Idoc. your problem is certainly due to the fact that "collect idoc" option is set.
All the idocs will get collected and sent once the report (RSEOUT00) is scheduled or manually triggered by transaction BD87.
Change the option to "Transfer Idoc Immediately" or schedule the output program are your two solutions.
Best regards,
Laurent.
(Remind Points if helpfull.) -
ISSUE:regarding production version tab of MRP4 of data transfer using BD10
Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA -
How to handle version changes? Strategies?
We're struggling with version change issues. Most recently we tried to move from 8.5 to 8.6 and lost about a week of project time while we tried to make it run well. The problem was that the Development Environment would crash several times a day while doing block diagram edits, losing unsaved changes. We never found any clues as to why. It would be one thing to debug a VI that crashes, but when it is the LV editor itself that is crashing, how do we work on that?
Anyway, we have a policy here of freezing software updates for projects that are close to completion, because buggy updates so often delay project completions, and this triggered a return to 8.5, which is where we remain now on that project.
But now we can't install and use the VI Analyzer we just bought on any of the PCs tied to that project, as it demands 8.6. I do have one PC that is completely disconnected from this project, and it runs 8.6, so running the Analyzer there may be useful, but still messy.
How do you handle version changes? How often do you try to follow the updates? How often do you need to go back a version? Do you maintain different versions? Is it even possible to run multiple versions on an individual Win XP PC?
Thanks!I have installed several versions of LabVIEW on my system.
Most of the toolkits are only installed in the latest versions. There are ways to install toolkits on multiple versions.
And I think that toolkits as of LabVIEW version 8.6 can be installed on several LabVIEW verions.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
ALEAUDIT: No filters No conversion No version change
Hi,
I am getting following error while confirmation creation
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing of Response
-->
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_ALEAUDIT</SAP:Code>
<SAP:P1 />
<SAP:P2>No filters</SAP:P2>
<SAP:P3>No conversion</SAP:P3>
<SAP:P4>No version change</SAP:P4>
<SAP:AdditionalText>& &, &, &.</SAP:AdditionalText>
<SAP:Stack>ALEAUDIT: No filters No conversion No version change</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anyone help?
Thanks,
PMHi PM,
Check if this related to table locks, go to SM12 and give EDDIC and see if there are any lock entries, if so delete them and reprocess the idoc...
Thanks..
Karna.... -
Firefox versions change too fast.
Some development-tools refer to HTML/CSS features that work in certain version, but with 1 major-verions per 6 weeks we are at version 16 in one year.
No tool will provide glue what CSS level can be expected to work in which version.
For example "WeBuilder" assigns for CSS properties whether
it works with
CSS2 Css3 IE6 IE7 IE8 IE9 FF3 FF4
They will NOT maintain a list with 9 Version for FF per year !
Please use major version changes for major changes, but
not as rollout counter.drcouzelis wrote:
I don't know if this is related to your problem, but animated gifs play at different speeds in different web browsers. In Firefox, they play at the exact speed they were created with. In Chrome and Internet Explorer they are "capped" at 100ms per frame.
But, I don't think there is a difference between Firefox for Linux and Windows. (I mean, in the code)
Really? I was just wondering --> -
Using ReaderExtensions ES. I have enabled the ReviewAndCommenting option.
Before enabling the PDF Version was 1.3(Acrobat 4.x). After enabled the PDF Version changed to 1.6(Acrobat 7.x). I need the PDF Version not to be changed after enabled. Kindly advice me how to activate this.
Thanks,
PrabudassIs there any Option for making the orginal PDF Version Stable even after "Review and Commenting" through Reader Extensions ES.
Thanks,
Prabudass
Maybe you are looking for
-
HT1923 The program can't start because MSVCR80.dll is missing.
Is there a fix for this message which suddenly appeared after I installed the latest update to Itunes? The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then I get Itunes w
-
Connecting wirelessly to access windows shared network printer
Hi there: New macbook computer. HP 2605dn laser printer. I've connected to the windows network using lpd and other protocols, and everything seems to be going smoothly. The printer shows up on my screen. I push print. It says it's printing. But nothi
-
Windows on an External H.Drive
Is it possible (with the MacBook) to install windows on an external hard drive instead of to the internal one???
-
Qtwebengine's, 'filepicker' doesn't work.
Hi. I am just asking for Can anyone confirm and vote this? https://bugreports.qt.io/browse/QTBUG-46314 EDIT: I am asking one more:) Are any of you able to play local multimedia files via "WebEngineView"? Eg. ### test.qml ### import QtQuick 2.4
-
Http error 504:gateway timeout
Hi, I am convert from windows mobile to Blackberry ! I have software running on my server that I can access using my mobile. BUT since I changed to BB I am getting an error trying to log into my server. If I use the browser under wifi with the browse