Regarding the address to locate picture in jar deployed

Hi friends:
I deployed a jar which has a picture used for backgaroud(background="<root>common/banner.jpg">). but I don't know it absolute address, could you please give me your solution to find it to show the picture?
thank you very much
<TABLE id=layout-top-banner height=101 cellSpacing=0 cellPadding=0 width="100%"
border=1 background="<%root%>/../common/banner.jpg">

HI Sony,
Use the STYLE attribute to display the backgroung image.Hope it should wotk.
PFB the sample code:
<TABLE ID="layout-top-banner" HEIGHT="100" CELLSPACING="0" CELLPADDING="0" WIDTH="100%"
STYLE="<%root%>/../common/banner.jpg>"; BORDER=1 >
Regards,
Lavanya.G

Similar Messages

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.

In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

Question regarding the pen tool (w/ picture inside)

Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!

A couple of thoughts come to mind:
1. You could create the shape "face on", using guides, and the points will snap to guides with snap enabled. Then you could transform the whole thing together by selecting all the shape layers.
2. Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
3. There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually. I assume this is what you're trying to avoid.
-Noel

Worklist-ejbs-81x.jar Deployment Help

I did create WLI 10.3 domain and try to deploy the following jars located in wli_10.3/lib
worklist-ejbs-81x.jar =======(Got the follwoing Warning)
calender-ejbs-81x. jar ========Deployed
worklist-admin-81x.jar ===== Deployed
<Nov 19, 2009 11:17:52 AM EST> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RemoteWorklistManagerBean', class com.bea.wli.worklist.beans.session.Remo
teWorklistManagerHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavio
r in the future, make sure the class is not located in the server classpath.>
<Nov 19, 2009 11:17:52 AM EST> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RemoteWorklistManagerBean', class com.bea.wli.worklist.beans.session.Remo
teWorklistManager was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in
the future, make sure the class is not located in the server classpath.>
<Nov 19, 2009 11:17:54 AM EST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: MessageBufferTopicBean is unable to connect to the JMS destination: we
blogic.worklist-ejbs-81x.WlwRuntimeAppScopedJMS#MSG_BUFFER_TOPIC. The Error was:
Can not get distribute destination information. The destination JNDI name is weblogic.worklist-ejbs-81x.WlwRuntimeAppScopedJMS#MSG_BUFFER_TOPIC, the provid
er URL is null>
<Nov 19, 2009 11:17:54 AM EST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: MessageBufferBean is unable to connect to the JMS destination: weblogi
c.worklist-ejbs-81x.WlwRuntimeAppScopedJMS#MSG_BUFFER_QUEUE. The Error was:
Can not get distribute destination information. The destination JNDI name is weblogic.worklist-ejbs-81x.WlwRuntimeAppScopedJMS#MSG_BUFFER_QUEUE, the provid
er URL is null>
[WARN] WebLogicURLTemplateFactory - In webapp <Worklist 8.1.x Compatibility>, the url template <http://{url:domain}:{url:port}/{url:path}?{url:queryString}
uses the {url:port} token. The system may not pick up the correct ports if you are using a proxy server. Consider hardcoding the ports in a productionenvironment.
Any help will be appriciate
Thanks
Subba
Edited by: Subba R Kancharla on Nov 20, 2009 11:40 AM

need to create MSG_BUFFER_QUEUE AND TOPIC
Re: Weblogic Controls always looks for MSG_BUFFER_QUEUE and MSG_BUFFER_TOPI

TS1314 How do you change the default location address (in My Pictures) of the IPOD Photo Cache ?

How do you change the default location address (in my pictures) of the IPOD Photo Cache ?

You do no specifically. It sounds like you are syncing a folder to the iPod. In that case:
From a Folder on Mac OS X, Windows XP, Windows Vista, or Windows 7
The iPod Photo Cache will be located in the folder you selected to sync with.
Thus, you have to change the location of the folder you sync with.

Ship-To Address/Performance Location in the Shopping Card

Dear Experts
How can achieve the following requirement.
In SRM Web Browser there is a section -> Ship-To Address/Performance Location
I wolud like debug in order find out how they are getting populated.
Name,
Other Name,
c/o,
Telephone Number,
Fax,
E-Mail Address ,
E-Mail Address
Do you know which program, function group, function module is responsible for it.
Kind Regards
Marco M

Hi,
You may like to check the class /SAPSRM/CL_PDO_BO_SC method PARTNER_FILL to see how the partner and address are being retrieved.
If you need to know how the address is being pulled, please check the FM BUPA_ADDRESSES_GET since this FM will be called eventually.
Best regards.
YS

ATTENTION MOZILLA DEVELOPERS!!!! I have had numerous issues all occuring within 24-48 hours,The latest is location/address bar not working completely! Who has solutions and fixes that actually work???

Windows 7 32bit Firefox 3.6.1.1 .... I really liked Firefox until recently!!!!
I'm not even going to explain all the problems I have had in the last 2 days, but i will tell you i have read so many forums and have done A LOT of fixing, 8 hours worth!! So before someone suggests for me to try a common fix I have done almost all things like. 
Disable extensions 
Disabled/Remove add ons 
Tried all in safe mode 
Deleted files in Firefox Profile 
Renamed files in Firefox Profile 
I have done almost everything except remove Firefox and use a different browser. 
What gets me most is this site (Mozilla support) is the least helpful!! i have found solutions that worked off of Non Mozilla forums!! 
Ok here goes...... 1. Auto complete works in location/address bar, when I click ENTER on keyboard or click the blue arrow in address bar NOTHING HAPPENS!!! I can go to bookmarks click on one and it will go right to the page! It's like the address bar is dead! 2. I have NO search engines in the search bar located right next to address bar, the only solution I found for that called for typing commands in the address bar, which i can do but it wont do anything!!! 
Please keep in mind I did a full Google search on these problems and have found that a lot of people have the same issues regardless of Firefox versions or Operating systems!! 
This is my last attempt to get accurate and proven solutions/fixes to these problems before I wash my hands of Mozilla, I'm sure someone will tell me to just do it!!! 
I am hoping to get knowledgeable responses to this post!!
THANKS,
Robert
I just found out this: Posted November 3, 2010 8:12:18 PM PDT:
When I go to Firefox profiles folder i have 3 different profiles all with default at the end!!! Which one do i rename and wgich do I delete? See issues just keep getting stickier a more complicated!!!
Thanks,
Robert

You can locate the current [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] this way:
*Help > Troubleshooting Information > Profile Directory > Open Containing folder
If the 11.01 & 11.02 are empty backups then make sure that create a backup of the other .json backups elsewhere as soon as possible to avoid losing backups that may still work.
The other profiles appear to have older bookmarks. You can check the file compatibility.ini in a profile to see which version of Firefox last used that profile.
A possibility is to create a fourth profile to test each of the JSON backups and check which bookmarks they store. If you open that profile with the -no-remote switch then you can copy and paste bookmarks from one profile (instance) to another profile. Both profiles need to be open at the same time to do that.
See http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

I have added a location to an event in calendar the event has synced to my phone with the address but it doesn't give a preview or the option to direct to the location?

I have spent all morning trying to get locations to add to events on my iMac this now works and has synced with my phone but when I open the event in my phone it has the address but doesn't show a map and doesnt give an option to get directions. I have an interview in a city I've never been to before and will need my phone to direct me from the train station. I know I can just do a search when I arrive but surely there's a way to do it from the calander evernt without having to copy and paste the location from calander to maps?

Did you follow the instructions on that page exactly ? The instructions work for me e.g. selecting a free app in the App Store app and tapping on 'free', then 'install app' and 'create new apple id' - filling in my details then gave a 'none' option on the payment details :

When I click on a link the address does not display in the location bar in the new tab. Which makes the back/forward button and refresh buttons unable to be used

When opening a link any link from firefox address does not display in the location bar. Even when navigating forward from there the address does not show back/forward button and refresh all rendered unable to be used

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I'd like to change the dfault file location, C:My pictures, to another file location, eg E or G. What can I do to change it?

See above question.

Hi trshaner,
Thanks again for your complete reaction. I’ve looked at the video and the help-information. This made me decide to leave the file My pictures where it is (C) and move some of the other folders/files to the E-drive. Thanks for your help.
Met vriendelijke groet,
Aad Oudshoorn
Edelsteensingel 166
2719 RC Zoetermeer
06-22250606
Van: trshaner
Verzonden: dinsdag 22 juli 2014 20:09
Aan: Aad Oudshoorn
Onderwerp: I'd like to change the dfault file location, C:My pictures, to another file location, eg E or G. What can I do to change it?
I'd like to change the dfault file location, C:My pictures, to another file location, eg E or G. What can I do to change it?
created by trshaner <https://forums.adobe.com/people/trshaner> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/6573614#6573614>

How to maintain the address of storage location in 2 diff languages?

Hi ,
I have to maintain the address of storage location in 2 diff languages
how to achieve this?

do you mean international adress e.g. with chinese characters and western characters?
you have to activate international adress version first.
when you maintain the storage location adress (by clicking he envelope, you will find a button for international adress in the lower part of the pop-up for the adress .

Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks

Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/">iPhoto Library Manager</a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN.

I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN. What should I do now ????

To answer the second question first, the owners of the music (and that is not Apple) decide where their music can be sold. If they decide (for whatever reason) not to sell their music in a particular country, they will not let a music retailer (that is Apple this time) sell it in that country. So the "system" is beyond Apple's control.
As for your first post; (if I understand you correctly), the iTunes Store knows that you are in Russia, so using a credit card registered in Vietnam is simply going to look like you're trying to get round the system.
The credit card is tied to an address, and therefore to a country. Simply using a different country's address is not going to work.
By the way, this is a world-wide situation. It's not a matter of having to use a Russian card, whatever card you use has to be registered at an address in Russia.
Use the support link in the iTunes Store to contact Apple and see if you can straighten out whether you can buy songs, where ever you are and with whichever card you have.

I have lost my Iphone and never activated my Icloud on my phone. Is there anyway of locating it whereabouts??? Also Who ever has my phone has downloaded find my phone. Is there anyway Apple can find out the address that was downloaded from??

I have lost my Iphone and never activated my Icloud on my phone. Is there anyway of locating it whereabouts??? Also Who ever has my phone has downloaded find my phone. Is there anyway Apple can find out the address that was downloaded from??

Unfortuantely, you can only track the phone if you had set up iCloud and enabled Find My iPhone on it before it was lost or stolen. I don't believe there is anything that Apple can do to locate your phone either.

TCA API create_location creates locations irrespective of the address style

Hi All,
We are using Trading Community Architecture API for customer conversion. We have address styles setup for Canada and US and we have attached these address styles to the respective countries in the territories window.
But when we use create_location API for creating location and then a party site for it, it allows us to create the locations even when we dont pass in a value for the REQUIRED fields setup at the address style. We expected it to error out.
Does anyone have idea about how this works. We want the API to validate the addresses we enter for locations with the address styles we set up.
ketha

You can create a wrapper package on top of the API (hr_location_api.create_location)
In the wrapper package you set all the values dynamically based on your requirements(say the style and add_line columns are populated on your conditions) and then you call the API.
Does that not work ?

Regarding the address to locate picture in jar deployed

Similar Messages

Maybe you are looking for