Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Direct connections are always best, but if you insist:
Get a Griffin iTrip or replace your radio with one that has AUX inputs and/or Bluetooth.

Similar Messages

The home and lock button on my ipod 4th generation are both jammed. Is there any way to fix this?

The home and lock button on my ipod 4th generation are both jammed. Is there any way to fix this? This makes the itouch difficult to use. Please help.

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

I have a question regarding the screen setting and an adjustment layer. It seems when I first tried this to lighten segments of a photo i.e. whites of eyes, it worked fine. I could go over it until I got the desired effect. Now when I do it, I get a li

Using blend modes with adjustment layers. I am having trouble getting the results I want by using a screen or multiply blend modes with adjustment layers. When I use the brush to reveal the hidden image, I am not gettting consistant darkness or lightness. I only have one photo open but it seems like I am getting data or colors from somewhere else. Anyone else have a problem like this?

A screen capture showing your document structure and problem in Photoshop may help get and answer.

I backed up my itunes library to an external drive.It's 119 gb.It took about an hour.When I looked at the files it list the artists and albums but then says the files are empty.On the C drive of my own computer it says they are empty.Why would this be ?

When I open up my itunes library on my hard drive it says it contains 119 gb.I tried to look up individual songs under each album and artist.Every time I open an album it says the folder is empty.I exported the library earlier to an external hard drive.It took over an hour.When I look on that library it also says the files are empty,yet when open itunes and play songs they are all still there.Why doesn't the library list each song since it says it contains 119gb?

bzq wrote:
Niel, I tried that several times but the Choose Library screen never appeared.
Then try again.
Make sure iTunes is not running.
Hold the Option key.
Click the iTunes icon in the dock.
Select Choose library...
Select the iTunes folder you copied to the external
ITunes would boot up like usual but the only songs listed were in the Cloud. None of my Apps, Playlists, etc. appeared.
Because you moved the library and have not yet told iTunes to Choose the library you moved.

Regarding the migration from mi 2.5 to Netweaver mobile

Dear All,
We need to migrate an mi 2.5 to netweaver mobile 7.1. I have read a white paper by SAP for the same which has six step approach. Even i have read certail documents which has certain clauses like if a filter has placed on two fields in mi 2.5, that rule cannot be migrated automatically, which need to be created manually.
So i need to understand the following things.
1. What are limitations/clauses in the modelling regarding the migration to netweaver mobile?
2. As there are data objects, associations, dependancies, distribution model, distribution rules in netweaver mobile, what are the corrosponding things in mi 2.5, to acheve the data distribution dynamically and depandancies between the syncbos?
3. What are all things i need to study regarding the current implementation of mi 2.5 in terms of data modelling and mobile application?
4. LImitations of mi 2.5/7.0 over Netweaver mobile 7.1
Can anyone please help me in this so that it will be great help for me.
Regards,
Kiran.

Thanks Ajith,
This is really good piece of input. Did you get any chance to gothorugh my word document. There are couple of clarifications what i have need is mentioned in that with the screen shots.
Clarifications are:
1. There are filters created for certain syncbos. They seems to be dynamic filters, so where can i see in the current mi 2.5 system where these values like ME-SYNC_USER is configured. This is the field that they have used for the dynamic filtration of data.
2. And there are no syncbos which have u201CFiltered by referencing Syncbosu201D enabled with the reference to excel and screenshot in the word document. Is this the way to look at related syncbos and if yes does it mean that there are no relations between the syncbos in the current mi 2.5 system?
3. Even though there are entries in merep_408 table for certain syncbos but i am unable to view the syncbo exits using the transaction merep_sbuilder. It shows the exits for ZEFACTIVITY but not for the others. What does that mean, is that mean exits are not maintained for the other syncbos.
4. Is S01 and T01 syncbos converted to Data Objects in Netweaver mobile. If they are converted, can you please explain clearly what is meaning of not supported and unable to use the capabilities of netweaver mobile 7.1, bacuse i am unable to understand.
5. Is the laptop client O/S dependant or if we install the respective jvm then does the same client run on all O/S.
6. While synchronization from the standard client it hits standard sync service provided by SAP, if the concurrency is more or overloaded, then what will be the alternative? In this i am not talking about load balancing. Can we do any routing to other server, is that the network configuration and any configuration done at DOE level?
I am really bombarding you with so many clarifications but can you please help in this so that it really helps me alot.
Regards,
Kiran.

Regarding the user menu

Hi Experts,
                    Can any one tell me in sap-bi i had created the role "zbcs_reports" under this role it is having the options for to execute the consolidations reports .this role consists of the folder's like consolidations under consolidations actual reports like that .here i created the one sigle user for that user i assigned this role for this role i have to assign the consolidations reports so that the user can execute the reports from the sap gui it means that the user menu .when i added this role the particular user when i am executing the user menu options giving that "no sufficient work books are found on server " this was the message it is giving .
1.first can any one tell me how i have to add the report to the user menu of the role .
2.this report should be able to add to the role like bex reports only i dont need to add like web report.
bye.

Hi ,
          As you told like that i had created the work book but here what happening means when i am assigning the report it is going to be add as an web item report .but here we required to add as an like bex analyser only means excel reports only we dont need the web items.
                      Apart from that when i am assiging the particular report to the particular user what evr the roles i am assiging to the particular user it is not availablr there .for ex here i had taken the user "madhu" for that madhu i had assigned the role "zbcs_reports" this role consists of the sub folders as you told me .but when i am trying to assigning the report to the particular user the role which i had assigned to the madhu it is not available over there .Once the role is available means i can assign the report to that the role .And that too it should be in bex format only i dont need in the web item report.
   bye.

HP LaserJet 2420 'Print on both sides (manually)' is missing from the current Windows 7 PCL6

Dear Support,
I have a HP LaserJet 2420 printer connected to my home network and I would like to use it from my desktop PC (connected with cable to the network) and from my notebook (connected with wifi to the network). I use Windows 7 Ultimate SP1 (EN) on both of them and I installed the current Win7 PCL6 (v5.7.0) driver downloaded from the official HP site.
I would like to print on both sides, but the 'print on both sides (manually)' option is missing from the 'Finishing' tab of the Printing preferences option.
If I turn to 'Installed' the 'Duplex Unit (for 2-Sided Printing)' under the 'Device Settings' tab of the Printer properties it doesn't work because this printer doesn't support the automatic print on both sides.
I don't want it work automatic only manual, but it is still missing. I have never experience it with much simple printer.
Please help to solve the problem! Thank you!
And what is the difference between the PCL5 and PCL6 and PostScript drivers?
Kind regards,
Szilárd Kurunczi

How do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

how do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

if you see all the different panel. I past the info in and have to manually expand the width of every panel. Is there a way of pasting the text in and the panel moves to the right with so that there is an even space on both sides of the blue panel?

There is a dead area in the center of the display. Display is normal on both sides. Cursor will cross it but disappears when going through it. Has anyone seen this?

I have a dead area in the center of the display in the form of a vertical line about 1/2 inch wide. The cursor disappears when passing through it but is visible on both sides. Display is normal on both sides. Anyone seen this before?

Might want to run the Apple Hardware Test just in case.
Intel-based Macs: Using Apple Hardware Test

Why doesn't the Belkin Thunderbolt Express Dock relay sound from it's audio out port?

Posted to Belkin Support community to no avail
=====================
Why can't my Belkin Thunderbolt Express Dock operate my desktop speakers?
Options
07-14-2014 01:48 PM
Bought a Belkin Thunderbolt Express Dock at the Apple Store to use with my new MacBook Pro.
When I connected it to my
-20" Mac Cinema display,
-Various USB connected hubs and devices,
-Various Firewire hubs and devices
-My ethernet network from my Cable Modem
Then made the last connection from the Dock to the Thunderbolt port on the MacBook Pro...
All was fine.
But when I made that one last connection - to my desktop speakers via the audio-out port on the dock (earphones icon) nothing happened. The dock did not pick up the audio from the laptop playng an iTunes song or send it to the desktop speakers. When I unplugged the audio cable from the Dock and plugged it in to the MacBook Pro directly, the desktop speakers kicked right in again.
Does Thunderbolt pick up audio-out from a MacBook Pro and carry it to the Dock for connection to my desktop speakers?
Of for some reason, can that signal not be carried by Thunderbolt?
Will I have to get used to the onerous task of unplugging 2 cables from my MacBook Pro when I want to more it to another location in stead of just 1 cable?
But stay with me. Here's the thing.
When this happened I called Belkin Customer Support to ask if they could help me. After taking me through their steps, they agreed that the unit must be defective and agreed to ship me a replacement Thunderbolt Express Dock.
The replacement arrived over the weekend and when I shut down my system and then plugged everything from Dock I purchased into the replacement Thunderbird Express Dock - - - - - the same thing happened!
No signal to the speakers from the dock. Perfect signal when the plug moved from the Dock to the computer itself.
Hence my question:
Does Thunderbolt pick up audio-out from a MacBook Pro and carry it to the Dock for connection to my desktop speakers?
Can it accomplish that function?
Am I really that unlucky to have received 2 defective new Belkin Thunderbolt Express Docks in a row?
Or is it simply a matter of the Dock not handling audio throughput in the manner I am expecting.
Then again, if this is the case, why did the Belkin techies not know this when I called them in the first place.
Yes, I'm going on and on here. But I really don't have time for this.
What's going on here?

OK. No reason to be playing games here. Just surprised that this issue hasn't been brought up here on the community boards as well. Here's the simple solution
Steve
========================================
Re: Why can't my Belkin Thunderbolt Express Dock operate my desktop speakers?
Options
07-17-2014 07:09 PM
After reaching a Level III technician in Belkin customer support today and having spent approximately 4-5 person hours on this issue, we figured out that the Sound/Output preferences in the Apple System Preferences should not be set to "Internal Speakers" but rather set to "USB PnP Sound Device".
Worked like a charm. Simple, elegant solution to a real problem, one likely to be encountered by 90% of the people who buy a Belkin Thunderbid Express Dock off the shelves of any Apple Store to use with a current generation Apple laptop or desktop computer.
But the Level III Belkin technician admmtted that this critical little piece of simple, straightforward information should have been readily available to their Level 1 techies who began helping me 5 person hours ago. Would even have saved Balkin loads of customer service support time.
And so the saga ends
Belkin owes me for helping them learn this precious lesson.
Steve

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Have you reported your problems to Apple?
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
And/Or
Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

Complaint regarding the Audio problem in handset

Dear Sir / Madam
I am having BlackBerry 8520 Curve and purchased it on May'10. After buying this BB handset I am facing the problem in audio and not able to listen the voice clearly. I had submitted my handset for 4th time at Redington India Limited Ahmedabad for the same issue, but the problem is yet not rectified.
I have submitted my handset again at Redington on 26th July 2012 and they have given me the estimate of Rs. 4200 to change the housing of the handset. Before that I have given my handset at Redington for the same audio problem on 14th Mar 2012, 16th Jan 2011 & also give while the handset was in warranty period, but the problem is still same.
Now my question is that, I have give mobile 4 times for same issue and still I am facing same problem than why should I pay for housing, as it is manufacturing fault of handset. Still my mobile is at Redington and I want the permanent resolution for the audio problem, and if you are not able to solve the problem than please keep the handset with you, as I don't want the defective handset.
I have purchased the Blackberry as it is the brand name and for the service but I am really disappointed by such kind of worst service.
Name: Nilesh
Contact No: ***
Work Order No: ***
Case ID: ***
Model: Blackberry Curve 8520
IMEI No: ***
Pin No: ***
Given at Redington on: 26th Jul 2012.
Please find the above details of handset and contact no, and I expect the positive response from your side. If the problem will not get rectified I will have to go for the legal action against the Blackberry and will also mention this issue on Facebook so another people also come to know about the services of Blackberry.
With Regards
Nilesh
Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever; this site is not a channel for any formal communications with RIM. Further, RIM provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user.
So, your escalation path is not here, in these forums. Rather, it is through the places you already are working with...even if they may have a poor reputation. You have no free path by which to bypass them.
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I use airplay if my receiver does not have the small audio jack?

I have a harmon kardon receiver for surround sound, but it does not have the small audio input jack to hook to my small apple airplay. Any ideas? should I just us the LAN plug from my receiver to airplay and try to connect itunes to it?
Or, can I just attach an old ipod to the stereo and leave it there as a hard drive for my itunes?
Thanks!

You will need a cable similar to the link below.
Mini Jack on one end and a pair of RCA jacks on the other.
http://store.apple.com/us/product/HA832ZM/A/belkin-rca-stereo-cable-2-m66-ft?fno de=72
These can be purchased at Wal-Mart etc. for about $6
If you have an Apple Airport Express, that is what you need.

Problem regarding the creation of Table using CSS.

Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
Madhavi

Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Similar Messages

Maybe you are looking for