Regarding the budget release and assignemnt of budget.

Hi,
I have created investment profile and distibuted the budget.(IM01,IM11,IM22 & IM52)
Partial release of budget is done through (IMCBR3)
Project is created and investment position ID is assigned (CJ01)
WBS element is created under the above project- CJ02
Budget is distributed to the respective project -CJ30
Partial release of budget is done against the project - CJ32.
problem:
1. Budget can be distributed above the released amounts for the projects assigned with investment positions
2. Assinment of budget happens above the released amount i.e., I am able to create PO above the release amount against the WBS element.
Quiries:
I want to how the release part controls the budget assignment?
Is any configuration need?
How the availability control acts?
Please explain.
Best Regards
M Kishore

Hi koshor,
Please check for GL used for Material / Service procurement secondary cost element is created.
In OBYC entries are maintained in GBB and BSX.
Budget check will happen for only thos GL for what secondary cost lements is creaed. If for any GL cost lements are not created then budget check will not happen.
Also check in Budget tolerence limit you maintained the setting for all transaction ++ or for some specific transactions. If you skipped PR PO here then system will not check for the budget.
If your requirement is budget check for all transaction then maintain ++.
Please check try and revert back.

Similar Messages

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

Update to the new release and firefox hangs and becomes unresponsive each time I try to open it. I have tried removing firefox from my pc, restarted my pc. went to Google Chrome and downloaded it again. Still hanging. Please help

Update to the new release and firefox hangs and becomes unresponsive each time I try to open it. I have tried removing firefox from my pc, restarted my pc. went to Google Chrome and downloaded it again. Still hanging. Please help
I can open Google Chrome and IE without any problems. My new version of Thunderbird won't let me see messages.

So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
Could you walk us through what happened when you tried to do the download, please?

How to find the version, release and sub release of HFM

Dear
Need to check what exactly is the version, release and sub release of HFM.
I have only the information that is 11.1.2.1. xxxxx
I want to find out x
How can I get?
thank you

I got it to run using Celvin method (using the JRE not the JDK). The JDK method threw back the following(E:\Oracle\Middleware\EPMSystem11R1\OPatch>opatch lsinventory -oh E:\Oracle\Middleware\EPMSystem11r1 -jdk E:\"Program Files (x86)"\Java\jdk1.7.0_17\bin
Files was unexpected at this time)
The method below worked:
E:\Oracle\Middleware\EPMSystem11R1\OPatch>opatch.bat lsinventory -jdk E:\Oracle\
Middleware\jdk160_35
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : E:\Oracle\MIDDLE~1\EPMSYS~1
Central Inventory : E:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.1.0.9.9
OUI version       : 11.1.0.9.0
Log file location : E:\Oracle\MIDDLE~1\EPMSYS~1\cfgtoollogs\opatch\opatch2013-09
-24_15-03-36PM_1.log
OPatch detects the Middleware Home as "E:\Oracle\Middleware"
Lsinventory Output file location : E:\Oracle\MIDDLE~1\EPMSYS~1\cfgtoollogs\opatc
h\lsinv\lsinventory2013-09-24_15-03-36PM.txt
Installed Top-level Products (2):
Oracle EPM System                                                    11.1.2.3.0
Oracle WebTier and Utilities CD                                      11.1.1.7.0
There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
E:\Oracle\Middleware\EPMSystem11R1\OPatch>
**This is the actual file contents. **
--------------------------------------------------------------------------------Installed Top-level Products (2):
Oracle EPM System                                                    11.1.2.3.0Oracle WebTier and Utilities CD                                      11.1.1.7.0There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.--------------------------------------------------------------------------------

Are there dependences between the OCI-releases and SRM-releases?

Hello at all,
could anybody tell me, if there is a dependence between the different OCI-releases and the SRM-releases. For example is the release OCI 3.0 compatible to SRM 5.0?
Thanks in advance!
Regards,
Boris

Hi
Yes. it is compatible.
Refer to few links which might help.
1. Catalog Content Management: Configuration Guide Release SAP CCM 2.0 on Basis 640
The guide is located in SAP Service Marketplace under quick link /ibc-srm Catalog Content Management
2. SAP NetWeaver 04 Installation Guide Search and Classification (TREX) 6.1
The guide is located in SAP Service Marketplace under quick link /instguides SAP NetWeaver
Release 04 Installation Cross-NW
3. service.sap.com/instguides SAP NetWeaver Release 04 Installation SAP XI Configuration Guide SAP XI 3.0
4. http://help.sap.com/saphelp_nw04/helpdata/en/start.htm
5. http://service.sap.com/ibc-srm
Self-Service Procurement link: If you are using SRM 4.0 with SAP
Catalog Content Management 2.0
Open the CCM 1.0 Business Scenario Description (English)
https://websmp102.sap-ag.de/~sapidb/011000358700000216232004E/BSDCatalog.pdf
Open the CCM 2.0 Business Scenario Description (English)
https://websmp102.sap-ag.de/~sapidb/011000358700003992162005E/BSD_CCM200.pdf
Master Guide
https://websmp102.sap-ag.de/~sapidb/011000358700002817082004E
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Regarding the Logical Path and file name

Hi all ,
I am using LSMW for creating the BOM of a material .
I am getting problem at step 7 , saying the logical path is pointing to physical directory .
Then i did some R & D . I created the logical path and logical file name using transaction FILE . Then i got the physical path using FM file_get_name.
But when i give those logical path and logical file names , still i am getting prob.... at step 7 of lsmw.
Pls let me know . I did my best unti l now ....
Regards

Hi Raj,
Can you send the Error which you got at Step 7??
It would be of great help if you can send the File Path and the file names you have used.
Regards,
-Syed.

Regarding the Post Installation and SP Level

Hi All,
We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system.
As our EP system is on SP 11and NWDI system on sp 9,Do we need get EP and NWDI Patch level in Sync? as there would be developers working from EP and BW as well on this NWDI server.
Here My doubt is:-
Do the Nwdi System needs to be in the same patch level as our EP system (as it is installed on EP itself.)
Do we need to run the Template for the Newly installed NWDI only after the Patch Upgradation?
Kindly Advice
Regards
Santosh.N.G

the patch level of EP and NWDI should be same

Regarding the xif adapter and ascii adapter

Dear experts
I have a requirement where i have to connect the crm system to non sap systems using the xif adapter and ascii adapter could you tell me what are the configurations steps to be followed for this.
Thanks & Regards
Rao

1) Don't use the ASCII adapter
2) Use the LSMW with the XIF adapter instead
As the previous posters said, it depends on what you want to convert, which will determine how to use this. A quick example of the XIF adapter with the LSMW is located in my blog here:
/people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter
Plus do a search on this forum for more information on using the XIF adapter.
Take care,
Stephen

Regarding the business object and configuration

Hi,
i have new scenario for Down Payment Request. Tcode is F-47.
I want to trigger WF when Down Payment Request is created.
please let me know the business object for F-47.
JMB,
i have already searched this scenario in SDN , i understand that you have faced same issue,please let me know whether you have solved your issue if yes please let me know the steps.
Points will be rewarded.
Thanks,
ram

Hello Everbody,
i have done the configuration settings for payment release, the transcation are OBWA,OBWE, and OBWJ..
i have used BOR BSEG for the transcation F-47, so whenever user post the document worklfow will trigger.. and i have used standard subworklfow WS00400011for the Single level payment release and it's working perfectly..
just i want to share..
Thanks,
ram

Regarding the Message Type and IDOCS related to IS-Banking

Hi Gurus,
can any one provide me the Message Type and IDOCs related to IS-Banking.
Regards.
Kiran kumar.

Hi,
Refer this link,
http://www.stylusstudio.com/edifact/d04b/BANSTA.htm
Hope it helps you.

Regarding the thunderbolts release date

Moved for greater exposure

silver6055 wrote:
dirkbonn wrote:
chefjeff wrote:
now isn't that interesting?
Hey, come on!   The empty post contains exactly the same amount of useful, accurate information on the Thunderbolt release as any other post on this topic on the internet! (And is much quicker to read and digest).   Now, why it belongs in the iPhone forum is another question, but be appreciative.
Ahh, so what, I had my fun with it.... (Darn, still no red smilies yet...)(and GREAT point about why it was here....)
BTW: for those lucky enough NOT to be following this discussion! On just one site (droidforums.net) you can find
" When Will the ThunderBolt Be Available for Purchase" with 1,478 posts,  HTC Thunderbolt Release Date, with 4,609 posts and  NEW: When Will the ThunderBolt be Available for Purchase? with 1,602 posts.
I gotta admit, I follow that site, as well as Droid-Life and, I hate to admit, Boy Genius, and that keeps popping up, along with the anger and wailing and knashing of teeth over its non-appearance.
All of them give dates that the poster was told be a reliable source (someone in a Verizon store, a pal at HTC, that guy at Best Buy, something they saw on a forum that they cannot remember etc), followed by others giving different dates.   And those are just the major threads on this topic on one forum.....It was certainly going to come out Jan 31, Feb 4, Feb 10, Feb 24, Feb 28, Mar 4, Mar 10 and now Mar 17.
And it's astounding that they are all getting unbelieveably torqued at Verizon for RUMORS that Verizon didn't even start. I am at a loss of words over that one (as well as waiting for the Droid X2 or the Bionic!).
Geri O

Regarding the inbuilt log and audit tables for APEX 4.1

Hi,
When we acces the Administrator login then we can view various logs like the sql commands that have been recently fired,user list for a workspace,access to each application.Where are these data stored and fetched.Also could we get the inbuilt audit and log table for APEX 4.1 ?
Thanks and Regards

>
Please update your forum profile with a real handle instead of "935203".
When we acces the Administrator login then we can view various logs like the sql commands that have been recently fired,user list for a workspace,access to each application.Where are these data stored and fetched.Also could we get the inbuilt audit and log table for APEX 4.1 ? This information is available through APEX views. See:
<li>APEX views: Home > Application Builder > Application > Utilities > Application Express Views
<li>Monitoring Activity Within a Workspace
<li>Creating Custom Activity Reports Using APEX_ACTIVITY_LOG
Note that the underlying logs are purged on a regular basis, so for the long term you need to copy the data to your own tables, as Martin handily suggests here.

For a good book regarding the network security and management

i am not a newbie to networking. i have done ccna successfully. now i want to do gain some knowledge regarding the security of the networks.
i want to know which book i prefer?? or any other good advice..
Regards

You don't get books dealing with ASP and MySQL but you can get books that deals with PHP and MySQL. For example I have used this book (click on it to go to Amazon):
There are other books as well but this one gets you started quickly and then you can develop your skills buying something more advanced.
Good luck.

Regarding the Master Data and the MRP maintained.

Hi,
i have one query,my client has 4 plant,for manufacturing a product there are 10 operation.The 4 operation is taking on Plant A.The 5th and 5th operation is is in Plant B.The 7th operation is at Sub-contractor to vendor and return back to Plant A,and the remining operation is at Plant A.
So what are the Master Data and MRP we have mainted for that?
Please revert back.
Thanks,
Mohit

Dear,
Sub-contracting is carried out for 2 types-
1) Operation SubContracting & 2) Material SubContracting
You need to activate SubCon key (30) in MRP2 for the material which you want to send.
When you run MRP, it will check the system, if you have the stock as per requirement in the system. If the adequate stock is unavailable it will create PR, which you will need to convert in SubCon Purchase Order.
Operation SubContracting
You have to activate External Processing
"X" (T Code OPJ8) in PP01 Control key for that operation which u want to do externally
In the routing for the externally processed operation enter the control key as PP02
In the operation details screen in the External Processing tab enable the check box subcontracting
Enter thr info rec no and other details and save.
Thru ME58 Convert purchase requisition to purchase order Thru ME2O Send the material to subcontractor. .Migo receive the material from subcontractor (check theMovement type-541)
Hope it will help you.
Regards,
R.Brahmankar

I have a question regarding the iPod Touch and iPhone batteries.

Hello,
I started asking myself questions lately about my iPod Touch 5th generation battery. A few months ago, when a friend of mine asked me to plug her iPhone 5S in the wall (the battery depleted), I noticed that her phone was at 1% of battery power. Then I compared my iPod Touch battery with her phone's battery, and discovered that my iPod Touch stops working when the battery is close to 10% battery power. This is concerning to me because I feel like I only have about 85-90% of battery power available when I use my iPod Touch, while my friend has over 99% of battery available. It's a huge gap, I can't use this 10% that I wish i had. I'm wondering why iPods can't stop functioning when the battery is close to 1% instead of 10%? Can you imagine not being able to use 10% of your battery! And it was like this since iOS 6.1.3. My iPod Touch would shut down automatically when the battery would be depleted, but in reality, it still had 10, maybe 15% left. Why is that?
Thank you.

Hey Lil'fighter, First, stop comparing an iPod with an iPhone. They may look a like on the outside, share the same iOS, and some of the components, but that is as far as it goes! The biggest reason your friends iPhone out last the iPod is a bigger battery, greater capacity. Secondly, the phone is configured a bit differently and uses power a little more effectively. Third, it is impossible to completely drain the battery in either device. A safety circuit prevents you from doing that. With Li-ion batteries if you completely drain one, it will de-ionize and become useless; never charge again. I suspect the threshold is set higher for an iPod then on an iPhone. But if you feel your iPod is not performing as it should, and a reset or restore does not improve function, then by all means take it to Apple and have it evaluated. Hope this helps. Cheers.

Regarding the budget release and assignemnt of budget.

Similar Messages

Maybe you are looking for