Regarding the content conversion parameters in file adapter
Hi Experts,
i had a requirement where i am having a nested structure on fcc side.Ingeneral we can specify the keyfield parameter as
follows.For example Header.keyFileldNames
But how can i specify the nested structure.for example
my structure
Header
field1
fieldA
fieldB
Inthis case how can i specify the keyfield parameter.
Thanks
Giridhar
Hi,
Refer to the replyin your previous thread. it contains good blogs.
Go through this as well,
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
Bhavesh
Similar Messages
-
File Content Conversion Parameters in FIle Adapter
Hi
I am doing a scenario - XML file to Text file using File content conversion parameters in Receiver File Adapter Channel.
I given FCC Parameters like:
DATA.addHeaderLine - '0'
DATA.fieldSeparator - ,
DATA.endSeparator - 'nl'
But im getting error in Receiver File Adapter as - fieldSeparator not specified.
i would be greatful if any one help me.
Regards
RajeshHi Rajesh,
There are lot of blogs which explain File Content Conversion in different scenarios:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
I hope this helps.
Regards.
Praveen -
I need this file "How to Use the Content Conversion Module in JMS Adapter"
Can someone send me this file:
"How to Use the Content Conversion Module in JMS Adapter"
I am not able to find it.
Thanks
Antonellopls refer guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Regards,
Swetha. -
What are the content conversion parameters for this structure
Hi All,
The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
Schedule D - District/Port List (by District Code) [Produced13APR11]
District | Port | Name
Code | Code |
01 | | PORTLAND, ME
| 0101 | PORTLAND, ME
| 0102 | BANGOR, ME
| 0103 | EASTPORT, ME
| 0104 | JACKMAN, ME
| 0105 | VANCEBORO, ME
| 0106 | HOULTON, ME
| 0107 | FORT FAIRFIELD, ME
| 0108 | VAN BUREN, ME
| 0109 | MADAWASKA, ME
| 0110 | FORT KENT, ME
| 0111 | BATH, ME
| 0112 | BAR HARBOR, ME
| 0115 | CALAIS, ME
| 0118 | LIMESTONE, ME
| 0121 | ROCKLAND, ME
| 0122 | JONESPORT, ME
| 0127 | BRIDGEWATER, ME
| 0131 | PORTSMOUTH, NH
| 0132 | BELFAST, ME
| 0152 | SEARSPORT, ME
| 0181 | LEBANON AIRPORT
| 0182 | MANCHESTER USER FEE AIRPORT, NH
02 | | ST. ALBANS, VT
| 0201 | ST. ALBANS, VT
| 0203 | RICHFORD, VT
| 0206 | BEECHER FALLS, VT
| 0207 | BURLINGTON, VT
| 0209 | DERBY LINE, VT
| 0211 | NORTON, VT
| 0212 | HIGHGATE SPRINGS/ALBURGsince in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
Regards,
Ninu -
Problem with file content conversion in receiver file adapter
Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
ChandraPosted in Incorrect forum.
Posted again in Process Integration forum -
File Content Conversion in Sender File Adapter
Hi,
I am implementing a scenario, where I need to do Content conversion in My file Adapter.My input file is as follows
BGN00S-A200711281003ET4
REF38381012
DTP007D820071128
N1P5P5MicrosoftFI58-0612397
INSY18030XNAN
REFZZZZ666666666
DTP336D819970331
NM1ILIL1AdamsMarkE34666666666
PERIPIPHP770555-5555
N31470 Georgia Club Drive
N4StathamGA30666
DMGD819571022MM7
HD030HLTAE1D
My data type is as below.
<header>
<BGN>
<A></A>
<B></B>
<C></C>
<D></D>
</BGN>
<REF>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REF>
<DTP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DTP>
</header>
<Content>
<N1>
<A></A>
<B></B>
<C></C>
<D></D>
</N1>
<REFAR>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REFAR>
<DMP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DMP>
</Content>
My issue is, How do I set my parameter in Sender Comm channel for content conversion especially at record structure.
I have provided the value as Header,1,Content,*
But its not working.
If I do provide like
BGN_REC,,REF_REC,,DTP_REC,,N1_REC,,INS_REC,,NM1_REC,,PER_REC,,N3_REC,,N4_REC,,DMG_REC,,HD_REC,* then ,I am not getting above XML format. Please suggest or How can I modify my Data type which competes to configure in Channel
Thanks
ManmadhaHi All,
I am sorry for the Jumbled Content. I dont know what happened.
I should get the XML output as below.
header>
<BGN>
<A></A>
<B></B>
<C></C>
<D></D>
</BGN>
<REF>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REF>
<DTP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DTP>
</header>
<Content>
<N1>
<A></A>
<B></B>
<C></C>
<D></D>
</N1>
<REFAR>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REFAR>
<DMP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DMP>
</Content> -
What r the content conversion parameters
Hi All
This link contains the text file.
http://www.census.gov/foreign-trade/d/dist.txt
what are the content conversion parameters are required to convert that text to xml.Make it simple recordset structure as below ...
Details
----------->District code
----------->Port code
-----------> Name
Recordset structure Details, *
Details.fieldSeparator :
Details.endSeparator 'nl'
Details.fieldNames : District code, Port code, Name -
What are the content conversion parameters
Hi All
This link contains the text file.
http://www.census.gov/foreign-trade/schedules/d/dist.txt
what are the content conversion parameters are required to convert that text to xml.<sen_dt>
<prefix>
<heads>
<dc>
<pc>
<name>
<main>
<dcno>
<pcno>
<name1>
<rec_dt>
<prefix>
<District_code> District code optional
<port_code> port code 1
<name> name
<main>
<District_code_no>
<port_code_no>
<name1>
content conversion
document name:<sen_dt>
document namespace:http::----
document offset:--
recordset name:input
recordset structure:heads,1,main,*
recordset sequence:Ascending
recordset per message:----
keyfield name:---
prefix.fieldfixedlengths:---
prefix.endSeparator:---
prefix.fieldNames;---
prefix.keyFieldvalue:--
prefix.keyFieldlnStructure:---
main.fieldFixedLengths:9,
main.fieldSeparator:|
main.endSeparator:'nl'
main.fieldNames:district code,port code,name
main.keyFieldValue:
main.keyFieldlnStructure: -
REG: File content conversion in Receiver file adapter
HI Gurus,
I have the scenario like proxy to file with content conversion
my message type for the source like this
MT_SOURCE
-----||
|---ROW
------------||
|---LINE
target strucuture also same
MT_TARGET
-----||
|---ROW
------------||
|---LINE
i am using the following FCC parameters in receiver file adapter
LINE.fieldSeparator = ' '
LINE.fixedLineWidth = 90
LINE.lineSeparator = 'nl'
LINE.fieldFixedLengths = 200
LINE.endSeparator = 'nl'
the output file show the data differently in note pad when compare to word
word output
dgepvs 023456987
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
notepad out put
dgepvs 023456987 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01
word output is the correct output wat i am expect but same out put i want in note pad can any help me out for this how can i resolve this
Thanks in advanceThere is nothing wrong in your content conversion parameters. This is pure editors interpretation for the next line character.
I would do in java program to fix this issue using '\r\n' You might want to try and see how that helps for notepad editor. -
Content conversion in Reciever File Adapter
Hi Frens,
Iam doing A FCC in Reciever file adapter. My input structure is
DT_structure
->Record
->Row
Field1
Field2
Field3
I have donr the configuration as
Recordset Structure : Record,Row
Row.fieldSeparator : ,
Row.endSeparator : 'nl'
Record.fieldSeparator : 'nl'.
With this configuration Iam able to display only one record but I need to display multiple records in the file. Please do suggest me wha need to be done to achieve this.
Radhika.First check whether your datatype has the occurrence of records unbounded or not. Then goto content conversion. If both your Record and Row tags can occur multiple times, then use
Recordset Structure : Record,*,Row,*
Or if Record occurs only once and multiple Row nodes are required, then use
Recordset Structure : Record,1,Row,*
Regards,
Prateek -
File Content Conversion Problem: Sender File Adapter
Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified! -
Content Conversion Issue - sender File adapter..!!
Hi All ,
Input file:
GRP|HD|7001|7001A00443|012|
GRP-LN|DTL|1|ZTAS|3|002|209782010|0001|EN
GRP-LN|TXT|Customer: KR Test, Case 3
GRP-LN|TXT|Power : -2.25
GRP-LN|DTL|2|ZTAS|4|002|209782035|0001|EN
GRP-LN|TXT|Customer: CL Test, Case 4
GRP-LN|TXT|Sphere Power : -2.25
T 7
I have 4 segments (Header,Detail,Text,Trailer) with "|" as the field separator and HD,DTL,TXT,T are the Keyfields
I need to get the xml structure like below heirarchy. Text segment has to come under Detail structure. Header,Detail and Trailer has to be in the same position.
Recordset
--Header
--Detail
Text
--Trailer
After completion of content conversion, I am getting the XML structure in the below format. All the segments are coming in the same hierarchy.
Recordset
-Header
-Detail
-Text
-Trailer
Text segment has to come under Detail segment. I used the below parameters for FCC.
Recordset Structure: Header,1,Detail,,Text,,Trailer,1
Recordset Sequence: Variable
Header.fieldSeparator
Header.keyFieldValue
Header.fieldNames
Detail.fieldSeparator
Detail.keyFieldValue
Detail.fieldNames
Text.fieldSeparator
Text.keyFieldValue
Text.fieldNames
Trailer.fieldSeparator
Trailer.keyFieldValue
Trailer.fieldNames
Kindly suggest me wat went wrong and how to solve it by content conversion.?
Thanks
DeepthiHi All,
Thank you for your replies.
I thought of doing it in mapping . My map is like
DTL -
> E1EDP01
TXT----
> -
EIEDPT2
According to my scenario when ever DTL comes then E1EDP01 has to come and EIEDPT2 has to repeat untill next DTL comes.
Ex: 1DTL and 4TXT segments .So the output will be..
DTL -> E1EDP01
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
DTL -> E1EDP01
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
Right now I couldn't able to generate the above target XML. Everytime I am getting all the TXT segments under one DTL segment like below.
DTL -> E1EDP01
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
Any suggestions how we can get rid of in mapping?
Thanks
Deepthi -
Content conversion in sender file adapter problem
Hello,
I receive a flat file with the following structure:
HEADER;...fields;
ITEM;...fields;
ITEM;...fields...;
HEADER;...fields;
ITEM;...fields...;
...etc.
and I am converting it to xml with the same structure. The Problem by the conversion is that the result looks something like this:
HEADER;...fields;
ITEM;...fields;
ITEM;...fields;
ITEM;...fields;
HEADER;...fields
HEADER;...fields.
So, all the ITEM recordsets are ordered to one HEADER structure and the other HEADER structures have no ITEMs.
Do you have a suggestion how I can get this right?
Thanks!!
Best Regards,
MirceaHi,
Can you provide with the details of FCC parameters you have used ??
The problem might be there in the occurance..
Regards,
Chandra -
File Content Conversion in Receiver File Adapter
Hi Experts,
I got a requirement like "I have to read the below XML and convert into text file with '|' seperator".
Below is the XML structure.<Header> is 1..1 cardinality and <Item> is 0..n cardinality and <Response> is 0..1 cardinality.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Response xmlns:ns1="urn:test.com">
<Header>
<Header1>abc</Header1>
<Header2>def</Header2>
<Header3>ghi</Header3>
<Item>
<Item1>Item1Val1</Item1>
<Item2>Item1Val2</Item2>
</Item>
<Item>
<Item1>Item2Val1</Item1>
<Item2>Item2Val2</Item2>
</Item>
</Header>
<Response>
<Message>Some Values are Missing</Message>
<Status>E</Status>
</Response>
</ns1:Response>
I want to generate the file in the way that for every item one row should be generated and in every row the header(1..1) should get repeated.
And I don't want the response node in the file. I want to ignore it.The file structure should look like below:
abc | def | ghi | Item1Val1 | Item1Val2 |
abc | def | ghi | Item2Val1 | Item2Val2 |
Please let me know how the header should be repeated in every row. I need this very urgent.
Your help will be greatly appreciated.
Thanks,
SwapnikaHi Swapnika,
you have change your receiver message type as per your requirement.
for example
<Record>
</Header>
<item1>
<item2>
</Record>
in the mapping use OneAsMany node function to replicate the nodes.
http://****************/Tutorials/XI/NodeFunctions/Page5.htm
https://help.sap.com/saphelp_nw04/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm
Explain node functions - Process Integration - SCN Wiki
Then use FCC.
how do you want to convert
like this abc | def | ghi | Item1Val1 | Item1Val2 |
or like below
abc | Item1Val1 | Item1Val2 |
abc Item1Val1 | Item1Val2 |
abc | Item1Val1 | Item1Val2 |
Regards,
Muni. -
Content Conversion in Receiver File Adapter
Hi Guys,
I have a XML structure as shown below
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_REC xmlns:ns0="http://test.com">
- <TAG>
<NAME>XYZ</NAME>
</TAG>
- <RECORD>
<RECORD_DATA>line1</RECORD_DATA>
</RECORD>
- <RECORD>
<RECORD_DATA>line2</RECORD_DATA>
</RECORD>
- <RECORD>
<RECORD_DATA>line3</RECORD_DATA>
</RECORD>
</ns0:MT_REC>
<TAG> and <RECORD> are at the same level
I want to convert this to a flat file containing
line1
line2
line3
but i am getting the output file with below data
XYZ
line1
line2
line3
I Don't want XYZ in the output file
Could anyone tell me how to acheive this?
Thanks
KumarHi Kumar,
Using unix script to change or create filename is a burden like you have to maintain these scripts till your production system and it's a overhead to transport all these scripts with your scenario.
You can easily disable this node in final output which you don't require and at the same time use this node to create your filename, by using two additional parameters in the FCC:
Name.fieldFixedLengths = 0
Name.fixedLengthTooShortHandling = Cut.
This will remove the node from your final output.
Regards,
Shridhar.
Reward Points if this suggestion is helpful.
Message was edited by:
Shridhar
Maybe you are looking for
-
Where do I get an install disk for my imac.
Where can I get the install disks for my imac 4,1?
-
MSS General info - exclude values in filter?
Hi We have Employee Group as part of the columns in General data. It is possible to Filter, eg to set Reg* and get all "Regular employees". But is it possible to filter by excluding a value. Example: Given following emp.groups: Regular Employees Temp
-
Document attachment while generating PDF
Hi all, Is it poosible to attach documents in the pdf in adobe lifecycle designer like we attach other files to a pdf in adobe acrobat? thanks. regards, daz.
-
Labview : Communicat​ion série avec un périphériq​ue
Bonjour, Sous Labview, j'essaie de communiquer via un port série à un périphérique. En parallèle, j'essaie de recevoir et d'envoyer des données. Je voudrais me placer en mode écoute (Activer la réception sur ce port : Visa read) puis envoyer une comm
-
Out of memory error when sending messages
Hello! I have OS X 10.4.10 and I have an email account setup (IMAP)in mail. Lately when I go to send a message, I get an "Out of Memory" error that it says is coming from the mail server, but I know for a fact that it's not a server issue (mail accou