Regarding the displayed varient

hi i have a requirement in which ,
as on parameter i have to pass any program/report name and it should display all the saved varient of that report in an alv,
plz help , if u have some code , post it.
thanks.

Hi Rahul.
I would like to suggest a few,
FI_LIST_VARIANTS_PREVIEW_ALV
/OSP/REPORT_GET_ALV_VARIANT - Fetch ALV Variants of a report
REUSE_ALV_VARIANT_SAVE - Save a display variant
REUSE_ALV_VARIANT_SELECT - Read a display variant
RS_ALL_VARIANTS_4_1_REPORT - Maintain All Variants for a Report
RM_GET_VARIANTS_4_REPORT_USER
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Similar Messages

Regarding the displaying the PO smart form in english

Hi Experts,
The problem is that the user had created the vendor master data and specified KOREAN language. After that user created the Purchase Order and checked the print preview displays the PO in KOREAN Language.
User went back and changed the Vendor master data from KOREAN Language to ENGLISH Language. Even after that output of the form in KOREAN Language.
The one solution what i think is that ask the user recreate the purchase order once more and the problem will be solved.
Please let me know is there any other alternate way to display the smartform in english language even after changing it from KOREAN language to ENGLISH in Vendor Master Data.
The system is 4.7.
Thanks in Advance.
Sunil Kumar.

Go to SE63 and change the korean text elements to english.
Manas M.

Complain regarding the display of my 13" macbookpro

hi,
I couldn't find another way to do this so i've decided to write here what happened to me. Two weeks ago i bought the new model of macbookpro 13" and after a week i've noticed spots and death pixels on my display. I went to the service store where they inspected my laptop and told me that hey are going to replace my laptop due to reported problems. I had to wait severals days for it to be replaced. When i took the other macbookpro 13", after a few days the same thing started happening to this one too. I am really disappointed and angry. I don't know why this is happening to me and what's wrong. I called the service store and i am still waiting for an answer.

I couldn't find another way to do this so i've decided to write here what happened to me.
Okay. And...? What do you want us to do or say about it? We're users here just like you and are in no position to help in this matter.

Regarding the display of adapter types in under run time work bench

hi all.
here in our company we had installed xi newly.
sap-xi server pi 7.0 .
but after one month sapag has done some changes in xi server.
and now when we are running xi server the runtime workbench is not showing list of adapters under adapter type and there were no new messages that we had sent newly in sxmb_moni.
so what are the changes that we have to done to make all correctly.
waiting for your response.
cheers.
seeta ram.
s

Try the follwing
1. Re-import SAP BASIS SWCV 7.0 into Integration repository
2. Refer SAP Note 764176.
3. /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Regards,
Prateek

Regarding the script of sales order(customer no. not displaying)

Hai all,
I have made a zcopy of sales order standard program(ZRVADOR01) and sales order standard script(ZRVORDER01). now my requirement is , in the displayed script there is info window. In that window customer number with field vbco3-kunde is displayed. but the requirement is they want this customer number in the address window. but when i run the transaction with debugging , it is not displaying this vbco3-kunde value in the address window.how to transer this value from this info window to address window . i have tried with set parameter but it is not working. i have tried by declaring a variable in the copied z-standard program and calling in z-standard script but still it is not displaying the value. please let me know the solution for this issue as soon as possible.
points will be awarded.
Thanking u in advance,
A.Srinivas

Hello,
Try with using VBDKA-KUNNR instead of the VBCO3-KUNDE.
Regards,
Naimesh Patel

How to Display Varient on selection screen?

Hi All,
the requirement is i need to display the varient on selection screen as Paramente.
Display Varient /STANDARD as a paramente on selection screen.
Please let me know how to do it.
Regards,
Kumar
Moderator message: very basic, please search for available information before asking.
locked by: Thomas Zloch on Aug 12, 2010 12:27 PM

Hi All,
the requirement is i need to display the varient on selection screen as Paramente.
Display Varient /STANDARD as a paramente on selection screen.
Please let me know how to do it.
Regards,
Kumar
Moderator message: very basic, please search for available information before asking.
locked by: Thomas Zloch on Aug 12, 2010 12:27 PM

Hey, I'm fixing up a Power Mac G5 for a friend, he gave me a Cinema HD 30' display to use with it. My problem is, the Power Mac G5 doesn't have a place where I can plug in one of the display's cords. the cord is called a "DC power (24.5 V)"

So the Cinema HD's DVI goes in fine, I don't remember what video card is in the computer, all I know is it's Nvideo, it's old, only like 256MB, but does have two DVI ports. Anyway, then the display's firewire and USB can go in. But there's this weird thing, had to do some research to figure out what the connector/cord is called. it's the size of a USB, rectangular with oval sides. It's called a "DC power (24.5 V)" I'm like, what the heck is this thing? it won't go into the computer anywhere, I'm assuming I need some sort of adapter?? Help please, if I need an adapter or video card, links would be extremely helpful.
Best regards,
Poly

I don't believe so, I have a DVI to ADC adapter I was messing with, my DVI from the display plugs into the adapter, then i grap the adapter's ADC connector, and it does not go into my Power mac G5's video card. So that confirms that the display is DVI, and works with my DVI video card perfectly. It's just the one wire/connector that apple calls the "DC power (24.5 V)" that won't go in anywhere. Basically the display has a DVI connector, firewire connector, and USB, which all go into my Power mac G5 fine. However, it has another wire with a connector that won't go in anywhere, from what I've read off the teach specs of my Cinema HD 30' that final connector/wire is listed as "DC power (24.5 V)"
So my problem is with that. I have NO idea what it does, or goes into. When I google "DC power (24.5 V) Apple" it comes up with weird images none of which have that connector. So I'm just so. Confused.

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

Question regarding the If-then-else function

Hi folks ,
I have been constantly putting threads on this subject for the past day, hope it doesn't annoy any one here.
My scenario is really simple, and i am almost close to the solution, but there is just 1 thing missing and i know that is a very small thing, could be the context too. Hope some one can help by pointing it out>
Mapping:
In my source i have a header(0-unbounded) & detail(0-unbounded). At a given instant either header / detail will occur in source, depending on that the target node "response" will occur(0-n times)
i have achieved this in the mapping.
the problem is this:
Both the Header/Detail have a field in it called Sequence# which is mandatory and can occur only once in the Header/Detail node.
Now depending on what occurs: ie Header/Detail i need to map that particular seq# into my Target Respone's SEQ_#.
I have done the mapping for this and have done a standalone testing.
Mapping: Check if HEADER EXISTS, if yes? then map the HEADER.Seq# to TARGET.Seq#
Here are my findings:
Scenario1: 3 header nodes(No Detaili) each with a seq # in it. Out put 3 Target node each with 3 seq # in it.
Scenario2: 2 Detail Nodes(No header) each with a seq # in it. Output fails to produce the 2nd Target Structure's Seq# and Fails
When i look into the Display Queue in the mapping , i examine the iF-Then-Else function:
Since HEADER doesn't exist i c 1 Suppress in my If-Condition hence the if condition becomes FALSE., now since its false its supposed to map the seq# from my detail. (This case i have 2 ).
But in the output of the IF-Then Else, i get out only 1 seq # which is the 1st one,
What i am thinking is that the exists condition is giving out only 1 FALSE instead of 2, If there were 2 false from the exists then i would have had both the seq # in my output,
I hope my question is clear, Would appreciate anysort of help . And i apologize if I seem to be brigning up the same question over again experts.
I don't wnt to create a UDF for this matter because i know there is something i am not doing right,
Hank

Sorry I could not give my udf in my last post.
Udf1:
Create a context udf and name it as RemoveSuppress. Take two input arguments a and b. Imports: java.*;
Add this code:
   //write your code here
boolean found = false;
for (int i=0;i<a.length;i++) {
     if (a<i>.equals(b[0])) {
     found = true;
     break;
if (found == true)
     result.addValue("true");
else
     result.addValue("false");
Then it should work.
Regards,
---Satish

ACD 30 Users: What is the height of the display w/o base? viewable height?

Apple does not list the display height or measurements without the base -
1. Can someone tell me what the size of the display is, including the the case/bezel, and
2, What is the viewable height of the screen?
I'm trying to determine how close in size my NEC 2090UXi is if I rotate it to use as a 'menus, palettes and mail' monitor in portrait mode next to an ACD 30.
Thanks in advance!
Sarge

Thanks. That's interesting, and surprising - it makes that the 'densest' monitor I've ever seen with regard to how tightly the pixels are stacked.
My 20" NEC LCD2090UXi 1600x1200 is, when rotated to portrait mode (i.e. 1200x1600)about 17.5" tall, vs. the ACD 30's 15" for the same 1600 pixels.
I suppose a 19" monitor in 1600x1200 would be a better choice for a 'portrait mode' 'partner' to the ACD30...
Though I don't yet know if I can rotate the second display anyway, when running it from my yet-to arrive re-flashed GeForce 7800GTX video card.
Thanks for the answer, though!

How can I display my bookmarks in a persistent column on the left of the display?

I like to have a permanent display of bookmarks i a column on the left of the display. Having restarted FF, this is no longer shown.
I see a View option to display the bookmarks toolbar - but I don't want a toolbar - I want to go back to having the list always shown on the left.
Regards
Dave Cope

Go to View|Sidebar| then select bookmarks.
davewdan

How do I adjust the display and sound with my Macbook Pro connected to my Sony Bravia?

I just bought the DVI - HDMI and then connected my Mac to my 46" Sony Bravia. It works obviously cause I'm typing right now, but it is so painful to try and read anything less than what appears to be 14 font or so. The display is set at 1080p obviously because that's the whole point of this, but is there a way to try and make things bigger? I don't want to sit super close to the TV and fry my eyeballs, that also defeats the purpose of this. Another question regarding sound. It seems I can only adjust the sound from my keyboard, but I would rather do it through my TV's volume control so I can make things louder. Any help would be awesome. Thanks.

mcfancher wrote:
Thanks for the reply. My dumbself forgot that right next to my new TV is my old TV, a 40" Samsung LCD. Now I put it on my desk and I have it in 1080p and everything is going good except for the fact that I can't see the top bar on my desktop and now the sound seems to be coming exclusively from my Mac instead of my TV, although I still have it hooked up with an HDMI cable. Any new thoughts?
EDIT: Ok fixed the display issue, but I'm still getting sound out of my Mac. Really confused on what to do. I don't see why I could get audio out of my Sony TV with an HDMI cable but not my Samsung. Doesn't the same principle apply? Xbox and PS3 work that way, so pretty confused unless I need to get a digital audio cable or something.
Message was edited by: mcfancher
If everything else is the same, that is strange. I have seen a post or two that reported only certain HDMI ports working with computer input, so if the Sammy has another HDMI input, give that a try.

How to change the display name for Gmail aliases?

I have a Gmail account with multiple aliases. They look like this:
Joe User <[email protected]> (Primary)
Support <[email protected]> (Alias)
Billing <[email protected]> (Alias)
Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
I have to imagine I can do this. Can someone help me out?
Regards,
Dave

Anyone came here, refer to this post.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

How to restrict the display of report variants

Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,

Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
      WHERE report = sy-repid
      and ename = sy-uname.
IF sy-subrc = 0.
    LOOP AT it_varid INTO wa_varid .
      CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
        EXPORTING
          report               = sy-repid
          variant              = wa_varid-variant
        EXCEPTIONS
          variant_not_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
ENDIF.

Regarding the displayed varient

Similar Messages

Maybe you are looking for