Regarding the extraction

Hi all,
I just started learning BW . I tried to extract data to 0COPC_C04 and 0SD_C03. The data was properly loaded to PSA and after that the cube is not loaded properly.
Can you please explain the about authorizations checks and master data loads of these cubes.
Thanks,
Krishna.

Krishna,
Want to make sure if your upload is completed?
What mesg is it giving in the monitor.
Try selecting the request and click on activate button. And then see if your data is avaiable for reporting.
Regards,
Rohini

Similar Messages

Regarding the Extract in alv report

Hi gurus,
please explain to me what is the Extract in ALV's.
i have an alv report in which they declaired avariable like disextract and assigned a radio button, if the radiobutton is check then the data is stored in extract.what is the use of the extract?

Hi,
Please check below thread;
Extract from ALV List
Regards
Jana

Guidelines required to analyze the extraction process for 2LIS_02_SCL.

Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.

Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy

How to analyze the extraction process for 2LIS_02_SCL both in R/3 & BW.

Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.

Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy

ERROR: Update mode C is not supported by the extraction API - R3 11

Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
Matteo

Hi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

How to find the extraction method of a datasource?

Hi,
On a review of some documents on SDN, regarding how to track where data is coming from to BW, there was this helpful quote.
Just knowing what is the extraction method of a datasource and our search of the origins achieves a vast improvement!
So, through se11, ROOSOURCE gave some details including the include ROEXTRACT.
from here, I am getting stuck, se16 and se11 are not helping.
How do I move from the information on this screen to see, for example, the extraction method for a datasource 2LIS_11_VAITM
Thanks

Hi,
I followed the instruction i.e. in ROOSURCE then Contents...
but when I enter the datasource 2LIS_11_VAITM in hoipes to see the corresponding Delta Process for this datasource, I get a message
"... No table entries found for specified key"
what does this mean, knowing that thie datasource exists.
Thanks

Urgent Entries for application 11 still exist in the extraction queue

Hi All,
In LBWE when i am trying to mainting structure its not allowing to add fields to ExtractStrucutre.
Following is the error iam getting.
Entries for application 11 still exist in the extraction queue ->
I have set the Update to inactive and trying to add fields to Extract strucutre .
Morover,
I have already deleted setuptable entries for this application Component 11 and i checked in rsa3, no records are there.
Regards,
C.V.
Message was edited by: P.C.V.

PCV,
Here are the steps. Make sure you do them when there is no posting going on.
1) Using transaction SA38, execute program RMBWV311. This will send the data from the extraction queue to delta queue for application 11.
2) Run your 2lis_11_***** info packages to bring the delta records into BW. Make sure to run these info packages twice because the delta is cleared on R/3 only if you run them twice. It is designed this way to accomodate the delta repetition functionality.
Just to make sure, verify that you don't see any data in RSA7, LBWQ and if you use RSA3, the system should not extract any data.
You should be able to change the extract structure now.
Abdul

The extraction program does not support object 0MAT_PLANT

Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

User-defined partners not coming in the extraction

Hi, the client where I'm working in has a user-defined partner in the Sales Documents, called Final User. This partner has the value ZA in the PARVW field in the VBPA table. We need to take the value of VBPA-KUNNR when its PARVW has value ZA, but we can't right now, because when the user modifies this field only (yes, only this field and nothing else) in VA02, it appears in the change log of the document, but it does not in the Delta Cockpit of the 2LIS_11_VAHDR.
I read notes 12682 and 520879 and I appended a field called PFINUSR to the MCPARTUSR calling the appending structure ZAMCPARTUS. I also added the following code to the RMCSUZ11 and RMCSUZ10 includes:
WHEN 'ZA'. MOVE UPE_VBPA-KUNNR TO UPE_PARTNER-PFINUSR.
I also modified the programs as described in the notes.
But when I go to LBWE and try to add the field to the extraction structure of 2LIS_11_VAHDR my field PFINUSR does not show in the right list. Am I missing something? Can anybody help me?
Edited by: Pedro Eguren on Aug 8, 2008 2:43 PM
The problem is that the notes are missing to lines. Two more tables need to be modified.
Edited by: Pedro Eguren on Dec 22, 2008 10:27 PM

Hi Raja,
Prior to trying Gordons option of unmarking and remarking them i would suggest you do a little more investigation as this can potentially change the field names in XL report and if you have any reports using them they may stop working (it can add a post fix of _1).
Firstly, what are the fields set as in the User Defined Fields window in XL reporter? Light Dimensions, Dimension Attribute or Measure? If its a Dimension Attribute for example on the Business Partner UDF, it will not be visible in the tab section but should be shown if you drag and drop the Business Partner dimension in the report, then right click and choose display more attributes (dimension attribute UDFs will be in this list). Light Dimensions and Measures should appear in the tabs.
If they are set as a light dimension or measure and are not in the tab section, has this only just started happening or have they never been visible? If its just started happening, having you recently upgraded to a new patch? If so, in future you need to run a script on the Company and Common database prior to the patch upgrade. If you did not run these scripts you will need to do Gordons solution but as I say, if any reports have UDFs in these may not work after and you will have to manually edit them.
Regards,
Adrian

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Need help in ABAP code to Enhance the Extract Structure ?????

Hi all,
 I want to enhance the extract structure to get KBETR & KBRUE fields of KONP table since it didnt allow me to add those fields while creating the generic extractor because of currency key problems. I want to read all KONP records into internal table with KNUMH (Key). Next, I want to fill them into ZZKBETR & ZZKBRUE of Extract Structure ZOXUR40065 in loop.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
TABLES: KONP.
Could you please help me in completing the ABAP code?
Thanks,
Venkat.

Hello Manga,
 I have included the following code in ZXRSAU01:
WHEN 'ZREBATE'.
PERFORM ZREBATE_EXIT TABLES C_T_DATA.
After Double click on ZREBATE_EXIT on perform statement, it created ZXRSAF01 include and the following code is added in it:
FORM ZREBATE_EXIT TABLES FP_C_T_DATA STRUCTURE ZOXUR40065.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
FIELD-SYMBOLS: <l_c_t_data> TYPE ZOXUR40065.
LOOP AT fp_c_t_data ASSIGNING <l_c_t_data>.
reb_tabix = sy-tabix.
select single KBETR KBRUE
into (<l_c_t_data>-ZZKBETR,
<l_c_t_data>-ZZKBRUE,
from KONP
where KNUMH eq <l_c_t_data>-KNUMH.
if sy-subrc eq 0.
MODIFY fp_c_t_data FROM <l_c_t_data> INDEX reb_tabix.
endif.
CLEAR:reb_tabix.
ENDLOOP.
ENDFORM.
When I tried to Activate this ZXRSAF01 include, it fails with 'The FORM "ZREBATE_EXIT" does not exist'.
Should it be FP_C_T or P_C_T? I found P_C_T in ZXRSAF01 include.
What is wrong with it, please ?
 Can't I add this whole code in main include ZXRSAU01itself?
The Extractor ZREBATE is based on KONA, KONH & KONP tables. This Extractor and KONA table have the same 4000 records and KONP has 13000 records. I want to extract KBERT & KBRUE from KONP.
 Thanks in advance.
Regards,
Venkat

Regarding the Delta Logic in the Report

Hi Abap gurus,
i have selection screen for 3 fields in one block called material, plant and extract date. if the user selects the extract date as todays date then data has to fetch the as per todays date.
i have two radio buttons on the selection screen for the second block. one is change material and second is all materials.
if user clicks on first radio button then only change material and aslo newly posted records for that date has to come.
how to build the logic for this? i have developed upto first part. data is coming fine. how to build the delta logic? i am working for the site receipts. guide me in this issue. if possible post the code.

Hi,
[here you find lots of sample reports, |http://help.sap.com/abapdocu_702/en/index.htm]
Hope it solves your question.
Regards,
Clemens

Regarding the extraction

Similar Messages

Maybe you are looking for