Regarding the no sound in ear speakers while calling or receiving

My iPhone 5 is a 16GB white A1429 unit, which is Factory Unlocked from Apple canada.  It was working fine for 7 days then suddenly I started experiencing audio problems.
I do not get audio through the ear speaker when trying to make or receive calls.  I can hear audio fine though, when using the speakerphone or the included headset., i tacled that situation by using loud speakers for a few minutes  then after some times its started to work automaticaly
Please note that my phone is NOT stuck on headphone mode as others have experienced.  It's only during voice calls that the ear speaker does not work.
Today again i faced the same issue suddenly while i was on a call, searched in net for a solution, no where i couldnt find a solution, but nw i had a solution with me and the reason too......
just press on the side of the front camera little harder (not with too much pressure) dont break ur iphone, and now u can make a call, u may hear the sound clearly,
Now my Theory:-  i went throuh the infrastructure of iphone, then i came to a conclusion that the iphone 5 internal board less harder than i phone 4 or 4s. The flex cables used inside the iphone are fixed with out any movements (*not like sliding phones), in iphone 5 the mic is just fixxing on the two connecting nodes on the flex to recieve the signals , if there is any dust particles, fungus or any slight movements may create a loosecontact in the system, but it dosent harm the system but only affecting the ear speakers malfunctioning. while pressing on the sides(right side) of the front camera where exactly the speaker connection fixed u are making the speaker back to get in touch with the flex nodes
the above mentioned trick is not a permenent solution
After this i can make calls with out any issues, i dont kno for how many days more i can be with out any serious other issues
Hoping for some input from other out there and hopefully, some type of solution will be provided soon.
Very disappointed that this would happen to a brand new, iPhone.
Thanks
Message was edited by: jenukoshy
Message was edited by: jenukoshy

I bought 3 iPhone4 from Hong kong for my family.
of which 1 has the same problem (No sound from ear piece when making or receiving a call). when I try to make a call the Speaker sign gets enabled but both the parties are not able to hear anything. its the same for both incoming and outgoing calls.
since I live in India, I have to take it back to the seller in Hong kong to find a solution. Iam sure the seller wont refund my money back or replace it for a new phone. I bought each phone for $1,300.00USD. Dont Know what todo. Iam stuck. Any help Please. As they say it is the worst encounter with iPhone4. after spending somuch money.

Similar Messages

  • My iPad 3 iOS 8.3 suddenly stopped playing sound on its speakers while on Spotify. Volume max. Side switch not on mute. Tried rebooting thrice. Sounds won't work on other apps. Works with earpods.

    My iPad 3 iOS 8.3 suddenly stopped playing sound on its speakers while I was listening on Spotify. Volume was maxxed out. Side switch not on mute. Tried rebooting thrice. Sounds won't work on other apps (Soundcloud, NPR, Clash of Clans). There are sounds when I attached my earpods. I tried the switch to mono solution on the other threads, didn't help either.
    My iPad is generally muted because of classes, but when I un-mute it it works fine. It just stopped after one song, and now I can't get it to work. Any thoughts? Thanks.

    Hi!
    I've the same issue after updating to iOS 8.3. on iPad 3.
    sound is working properly only with headphones attached.
    when I tap on AirPlay button it says "Docking connector" while it should "iPad"
    when i play with sound settings and try to change e.g. some alert sounds, sound is played and volume slider in control center magically appears.
    any other app can't play sound.
    is there any fix for that?
    Thanks

  • The I4S is frequently hanging when a call is received after updating the Sw to version 8

    After updating the Phone Software to version 8 the Instrument I4S hangs frequently when a call is received. You can see who is calling but the touch screen does not respond and only way is to switch off and on.

    Make sure that you don't have the Do Not Disturb mode enabled in your device.
    Use Control Center and verify that the Moon icon is greyed (not white).
    Check as well in Settings > Do Not Disturb > Manual and Scheduled is turned off

  • Soft sound from rear speakers while playing mov

    Hi,?Gaming and music is done via all speakers (i'm using analogue connection) just fine, but when i play a movie (using powerdvd 6?deluxe) i get faint sounds from the rear speakers. I had contact with creative's help desk in my country and we ran thru all system settings (e.g. thnx console). Everything was configured correctly., tho still a weak sound from rear speakers. They could not help me further ?I'm using a x-fi fatality soundcard with a logitech z-5400 speakerset.
    When running a movie it shows a logo near the system tray : dolby digital. I am hoping one of u has a solution to this problem. Greetz,?Nask

    In most of the cases, movies with mutichannel soundtrack do not use constantly every speakers. I think your case is normal and that's only your DVD's mix (as many DVD) that concentrates more on the front. try some of the sample there: http://www.digital-digest.com/dvd/do...s/trailers.phpIf the first one sound at the same level for each speakers then it's alright.

  • How do I get the correct sound from auxiliary speakers with ipad2

    I cannot seem to get the sound correct when connecting my ipad2 to auxiliary speakers. Everything else works fine with the same speakers. Any ideas?

    If you are looking for EQ settings for the iPod app, go into the Settings app and select iPod>EQ and this will provide some presets. There is not an overall sound control mechanism though.

  • Question regarding the use of Built-in Bridge SIP call setup to recording device

    We have an application that uses Built-in Bridge (BiB) to setup a SIP call to our recording application. Recently the topology of our network was changed and for some reason the RTP for the call is not being sent. What appears to be happenning is that the SIP messages are sent from the UCCM and once the call is established we get an end call event.
    We are not sure how to troubleshoot our network to determine the root cause. Any pointers will be appreciated.
    Thanks.
    -Arun

    Hi
    Did you ever figure this out?  I am having an issue with recording calls to the PSTN from 9971 SIP phones.  Station to station calls seem fine, and 7945 phones running SCCP seem fine to the PSTN.
    Thanks,
    Aaron

  • Installing app via xcode to iphone 4s, cause iphone to freeze while calling or receiving

    i have bought recently an iphone 4s.
    i use it for development.
    everything seemed fine, install my app, test, all ok.
    BUT, if i shut down the phone, and restart it, i can't call:
    1) the screen seems calling but i can't hear the ring, the call however arrives and if someone answer doesn' hear anything, and i can't hear anything too
    2) if i click on terminate call, the screen remain freezed (button red becames grayed but nothing happens)
    3) if i send message, the message remain blocked at 90%, the message arrives, but hte phone says impossible to send
    4) if someone send me message, it doesnt arrive
    5) if someone call me, i not hear sound and nothing visible happens on iphone, but who call me says the line is free
    tyied with:
    1) change sim card
    2) repetly shutdown and restart
    3) call callcenter
    4) change the phone!!!!!!!
    the only thing i can do is restoration with itunes.......
    do someone has an idea?

    Hello, it seems that it really is not something i'm installation to make this defect:
    is happening to me again, this time I have not even installed anything but to sync the address book.
    it is possible to happen when I turn off the PC while the phone is stuck with itunes running?

  • Original I phone4 user facing problem while calling or receiving a call.

    I have an Iphone 4 which i purchased from HK. All of a sudden now, (after a year) I have started facing a problem when I talk on the phone. While talking (whether i received a call or made) I can hear the other person but the person on the other side cannot hear me. Further, when this happens, I need to restart my phone. It then works ok for a few mnutes and again during a call I face the same problem. Please advise what could be the possible cause and how can this be rectified? As I am based in India, there is no Apple Store to which I could turn to.
    Thank you,

    Warranty and support are only valid in the country of origin, in your case, that is Hong Kong.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    The fact that it seems to clear up after a restart leads me to believe it is not a hardware issue but rather a software issue or network problem.
    Have you contacted the carrier?

  • Call lag while calling and receiving calls in blackberry leap

    I am facing 3-4seconds call lag while receiving and calling and this is getting very irritating. Is this a bug or what, if yes then what is the resolution for this. Are we getting 10.3.2 for BlackBerry leap.

    Somewhat duplicated, at least as far as the update availability:http://supportforums.blackberry.com/t5/BlackBerry-Leap/When-we-will-get-10-3-2-update-in-india-for-blackberry-leap/m-p/3122959#nobanner As for your specific issue, if you don't reveal your OS level, it's impossible for anyone to determine if perhaps it is the OS version that is the issue for you...this issue is well documented, but seems to be specific version dependent. Refer:Article ID: KB23393 How to find the model number and OS version on a BlackBerry smartphoneIf I had to guess (and, without information from you, that's all I can do), I'd guess that indeed you are running an OS level that presents this issue, and should update to newer versions to see if it resolves your issue. Do note that once you go up to 10.3.2, you cannot go back to 10.3.1 or prior. Good luck!

  • Internal Error occurred while calling the ProcessDPCommands API

    We have installed Business Objects XI  with MySQL. We are getting following error when we click on view query on the WEBI Reports
    " Internal Error occurred while calling the ProcessDPCommands API  Error WIS 30270".
    When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
    Please hep to fix this problem
    Installation is on Solaris 10
    Edited by: AshishDatar on Nov 6, 2009 3:00 PM
    Installation is on Solaris 10

    did you check whether universe connection is pointing to the correct db?The following url might be helpful:
    [http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

  • Error while calling WebService inside ISchedulerTask.

    Hi,
    Env: NW 2004s
      I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
    I have varified the ear file which contains all the required class files and config files including property file.
    fyi:
    portalapp.xml file looks like this.
    +
    <?xml version="1.0" encoding="utf-8"?>
    <application>
      <application-config>
        <property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
      </application-config>
      <components/>
      <services>
        <service name="RFServiceWrapper">
          <service-config>
            <property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
            <property name="startup" value="true"/>
          </service-config>
        </service>
      </services>
    </application>
    +
    Any input will be highly appreciated.
    Thanks,
      Vinod

    Following is the error message:
    msg1:
    at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
    msg2:
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
    Reporting from Logs and Traces.
    Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
    input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
    loadProtocolsFromPropertyFile(input);
    protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
    FYI: All these files are present on ear file.

  • Error while calling BAPIs for DMS from Portal

    Hi everybody,
    We are developing a portal with Web Dynpro and trying to call from our java code BAPIs that deals with DMS:
    BAPI_DOCUMENT_CREATE2 - to create a new DMS document and checkin an original.
    CVAPI_DOC_CHECKIN - to checkin an original to an existing DMS document.
    CVAPI_DOC_CHECKOUT - to checkout an original from the DMS.
    While using other bapi's that deals with DMS but do not deals with originals (like creating a new document, retrieving metadata about documents and originals) we don't have any problem.
    Only when trying to checkin or checkout originals we get the following message (from the DMS?): RFC_START_PROGRAM
    the full message is: com.sap.aii.proxi.framework.core.BaseProxiException:RFC_START_PROGRAM error key:RFC_ERROR_PROGRAM.
    does anybody knows the meaning of this message?
    by the way - those BAPIs works well while called from the R/3. only when we call them from the portal we have this problem.
    thanks for any information, Adi.

    Hi Adi,
    Right now I have a similar problem. Did you find the cause/solution?

  • Error while calling BAPIs of DMS from Portal

    Hi everybody,
    We are developing a portal with Web Dynpro and trying to call from our java code BAPIs that deals with DMS:
    BAPI_DOCUMENT_CREATE2 - to create a new DMS document and checkin an original.
    CVAPI_DOC_CHECKIN - to checkin an original to an existing DMS document.
    CVAPI_DOC_CHECKOUT - to checkout an original from the DMS.
    While using other bapi's that deals with DMS but do not deals with originals (like creating a new document, retrieving metadata about documents and originals) we don't have any problem.
    Only when trying to checkin or checkout originals we get the following message (from the DMS?): RFC_START_PROGRAM
    the full message is: com.sap.aii.proxi.framework.core.BaseProxiException:RFC_START_PROGRAM error key:RFC_ERROR_PROGRAM.
    does anybody knows the meaning of this message?
    by the way - those BAPIs works well while called from the R/3. only when we call them from the portal we have this problem.
    thanks for any information, Adi.

    Hi Adi,
    Right now I have a similar problem. Did you find the cause/solution?

  • JDBC Exception while calling a web-service

    Hi all,
    We are getting the following JDBC Driver Timeout Exception while calling an external web-service..
    An exception occurred while executing a transaction. Details: An error occurred while accesing the database. Detail:SQL statement: ' SELECT INSTANCEDATA, PROCESSID, INSTID, THREADID, NAME, PARENTTHREAD, PRIORITY, CREATIONTIME, AUTHOR, PARTICIPANT, NEXTPARTICIPANT, PROCESSDEADLINE, ACTIVITYDEADLINE, RECEIVETIME, ACTIVITYNAME, NTHREADS, CTHREADS, FCTHREAD, TOTALTHREADS, STATE, SOURCEACTIVITYNAME, ROLEIN, PENDINGITEMID, LASTRESULT, ITEMDEADLINE, NCHANGES , NREMARKS, NATTACHMENTS, HASPARTFORROLE,MICROACTIVITYNAME FROM PPROCINSTANCE WHERE PROCESSID = 11AND INSTID = 10 AND THREADID = 0 FOR UPDATE' Caused by: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock fuego.transaction.DatabaseException:
    How do we resolve this exception?
    We have increased the JTA timeout to 120 seconds.. in the engine..
    Our process is deployed on Weblogic Server

    Looks like specific record for the Instance id 10 is locked in the Engine table. I am not quite sure, what kind of Business scenraio you executed to end up in this issue.
    But you can try restarting the BPM engine or check with the Oracle DBA to see any lock on the rows in Engine database and perform required unlocking operations.
    -Lovin.V

  • The sound was lost suddenly while listening to a pre-aired program on National Public Radio that I accessed from a link from an email from my sister. Everything sounded fine for the first 10 minutes then the sound from the 4S iphone speakers just stopped.

    I lost the speaker sound suddenly while listening to a previously aired radio program. Cannot hear any sounds on my Apple 4S iPhone since it happened. Cannot even hear Siri anymore. Can only hear any sound at all using my ear buds. No speaker sound whatsoever. Any suggestions? I've already restored the whole system using iCloud as my backup. I've also rebooted the phone several times. The sound functions well using headphones (which i was not using when the speaker sound all of a sudden stopped working in the middle of the program). I tried cleaning any debris from the speaker and other crevices using a toothbrush and have tried blowing any debris out too. I pressed up on the charging dock using a pen and tapped on the speaker side to dislodge any debris. I even stuck my phone in a plastic bag and put it in the freezer as someone suggested. Any other ideas? I even deleted an app to free up some space. Any other suggestions please?

    it's a hardware issue read more here
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    and here
    https://www.google.dk/search?q=iphone+stuck+in+headphone+mode&oq=iphone+stuck+in +&aqs=chrome.3.69i57j69i65j69i61j69i59j0l2.4192j0j7&sourceid=chrome&es_sm=93&ie= UTF-8

Maybe you are looking for