Regarding the patch level..

Hi All,
This is krishna, I created two types of add-ons.. One is, In the exiting form only i created some more fields.. Another one is, newly created user defined forms and in which some fileds.. It is working fine.. Later i upgraded the patch level 5 to 40 for client requirement. When ever i upgrade that patch level, my second type of add-on are not working.. That is its not opening forms.. What happend i don't know..
If anybody knows the solution.. Plz let me know...
Regards,
krishna.v

Your question is more related to SDK for your own add-on. Please post it there.
Thanks.
Gordon

Similar Messages

RFC monitoring in CCMS if the patch level    R/3 release 4.6C ?

Hi all,
FOr RFC monitoring is possible in CCMS if the patch level   R/3 release 4.6C ?
    ST-PI 2005_1_46C
    ST-A/PI 01M_R3_46C
    SAP_NOTES 46C
    SAP_HR 46C
    SAP_BASIS 46C
    SAP_APPL 46C
    SAP_ABA 46C
Please let me know the requirements for configuration?
Regards,
Neni

Hello Neni,
It certainly seems possible to Monitor RFCs in relearse R/3 4.6C for tRRCs and qRFCs.
Check your CCMS setup guide
You can
1. Start TX RZ20.
2. Open monitor collection SAP CCMS Monitor Templates.
3. Open the Communications monitor.
4. Choose Extras -> Maintenance functions on.
5. Mark the MTE 'Transactional RFC and Queued RFC'.
There you can edit your hosts.
You can restart the Monitor immdiately with transaction RZ2.
Hope this is helpful.
Regards,
Paul

How to find the patch level of a BI 7 system.

Hi Experts,
I am not able to add navigation attributes to an info cube in BI 7 system ....does the patch level applied to the system effect this functionality ? if so how can we upgrade the system?
How can we find the patch level details of a SAP BI 7 system ? The release notes doesnt give any information in regard to the patches. Is there any direct way of getting this information by ourselves without contacting the basis team.
Kindly let me know your valuable suggestions.
Thank you and much appreciated.
Regards,
Sharanya.

Hi Bala and Teja,
Part of my question was answered , Thank you for your help.
I see that the patch level is 17 on our BI 7 system..........but does it effect the functionality to add a navigational attribute to an info cube?
Can you suggest me any possible reasons for this issue, and also any solutions if you have please.
Thank you and much appreciated.
Regards,
Sharanya.

Regarding the first level navigation par file customization

Hi
i require the help on the first level navigation par file customization.
i downloaded the rthe required par file from the server for changes.
the name of the par file is <b>com.sap.portal.navigation.toplevelsingle.</b>.
my requirement on this par file is i want to add an image file (.gif) to the first level navigaton at the end of the header.
can u guide me how to do the chages to add an image in the top level navigation
header file for this in the par file.
reply ASAP
Regards
sunil

Hi Sunil,
Do you really want to place the image at the right side of the TLN - or at the header (which is different)?
In the first case, there is a mixture of JavaScript and JSPs (containing JS) which build up the TLN, and this is quite complicated to understand (at least too complicate for a SDN thread). You would have to work through the code and try to modify it carefully.
In the secondd case, you are touching the wrong PAR, but you would know the right one (as you opened a different thread about such a modification).
Alternatively, you could try to use the light framework page, using the navigation tag library. This way, it is more easy to design your own UI, including the nav functionality.
Hope it helps
Detlev

Clarification regarding the patch 16213642

Hi All,
We upgraded our instance to R12.1.3 and applying the RPC patch 16213642. As per the readme,
B) If you are Non Federals customers:
If You are applying RPC on 12.1.1 instance then please apply     1. 12359561:R12.PSA.B
     Note: AP patches 11930938:R12.AP.B/11651946:R12.AP.B mentioned in
readme of this patch are included in this RPC, hence no need to apply
them manually
     2. 9461290:R12.AR.B
3. 9756446:R12.IBY.B
As we are non-federal and on 12.1.3. Should we skip the patches? Could anyone confirm. as its not clear from the readme.
Thanks

B) If you are Non Federals customers:
If You are applying RPC on 12.1.1 instance then please apply     1. 12359561:R12.PSA.B
     Note: AP patches 11930938:R12.AP.B/11651946:R12.AP.B mentioned in
readme of this patch are included in this RPC, hence no need to apply
them manually
     2. 9461290:R12.AR.B
3. 9756446:R12.IBY.B
As we are non-federal and on 12.1.3. Should we skip the patches? Could anyone confirm. as its not clear from the readme.According to MOS search, those patches are not included in 12.1.3, however you will need to query AD_BUGS table to verify if any of those patches is applied or not.
If the patches are already applied then you can skip them, but if they are not then you need to apply them.
Please note that some of those patches have been superseded, so make sure you apply the latest ones.
Thanks,
Hussein

Regarding the detailed level navigation theme change

Dear Experts,
I am using Light Detailed Level Navigation iview .And in the theme if I make change for the backgrond color of the theme related to DLN its not reflecting for the entire tray .For some part of the dln the changed color is reflecting(where and all links appears) in the other parts its showing the default color.
Can someone help me in this regard.
Thanks,
Regards,
Rudradev

Hi Sunil,
Do you really want to place the image at the right side of the TLN - or at the header (which is different)?
In the first case, there is a mixture of JavaScript and JSPs (containing JS) which build up the TLN, and this is quite complicated to understand (at least too complicate for a SDN thread). You would have to work through the code and try to modify it carefully.
In the secondd case, you are touching the wrong PAR, but you would know the right one (as you opened a different thread about such a modification).
Alternatively, you could try to use the light framework page, using the navigation tag library. This way, it is more easy to design your own UI, including the nav functionality.
Hope it helps
Detlev

How do I see the Kernel patch level in Java ONLY instance?

Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor

Where is the information about "Patch Level" of a particular version

Hi all,
Where I can see what is the latest "Patch level" of a particular version of tuxedo. For example, what is the latest patch level of tuxedo 9.1, where I can find it out?. This information is public ? We need a oracle contacts?
thanks in advanced

MBriz,
The number at the start of last line in $TUXDIR/udataobj/patchlev is the Tuxedo patch level. (If there is no $TUXDIR/udataobj/patchlev file, then you are running the General Availability version of Tuxedo.)
This information is also available by executing "tmadmin -v".
A third way to get the information is to look at the first line printed by the BBL in the userlog on a particular day, which will be something like "09-30-2010: Tuxedo Version 10.3.0.0, 32-bit, Patch Level 041". (Other processes' first ULOG message of the day will indicate the Tuxedo Version, but will not include the patch level.)
Regards,
Ed

Should we follow the sequence while upgrading to latest patch level?

Hello,
While applying patches in any module say HR,if my current level is SAPKE60028,Can I dirrectly download SAPKE60034
& upgrade it or should I follow the sequence?
SAPKE60028,SAPKE60029,SAPKE60030,SAPKE60031,SAPKE60032,SAPKE60033,SAPKE60034.
Regards,
Rachel.

Hi Rachel,
You cannot directly upgrade from a lower level SP level to higher SP level directly for ABAP stack by skipping the ones in between.You will have to follow the sequence and it will also not let you to proceed say from SAPKE60028 to SAPKE60030 unless you have the SAPKE60029 in between.The prior level is checked as a prerequisite in order to advance to the next level.
However, for JAVA statck upgrade it is possible because in Java whatever patch level u choose it is consolidated.For instance, if you are at patch leve 12 at present and want to upgrade to level 17 then the patch level 17 is a consolidated package consisting of all the levels from 1 to 17.While upgrading it removes all the existing previous SP and deploys SP level 17 right from the beginning i.e level 1 to 17.
Thanks,
Saby..

SAP patch level to change the Gratuity Tax ceiling

Dear friends,
What is the patch level to change the Gratuity Tax Ceiling.

HI
There are not many changes reported in Gratuity from long back since year 2008. There is a new note on Superannuation and ESOPs(Note 1396661 - New Perquisite Rules in Budget 2009-Superannuation & ESOP's) but no new note on gratuity. The last note on gratuity i.e. Note 1115073 is valid from 16.01.2008 and from patch level 27.
The latest patch available is SAPKE60056 but you can have gratuity calculation in as low as SAPKE60027.
Regards
Vikas K Sharma

How to determine 640/J2EE Startup Framework Binary Patch Level?

Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
Greg

Hi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release                700
kernel make variant           700_REL
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              UNICODE
compile time                  Jan 23 2008 20:42:28
update level                  0
patch number                  128                         <<< Here is the patch number>>
source id                     0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
   Support Packages and Patches ->
   Entry by Application Group "
   SAP NetWeaver and complementary products"
   SAP NETWEAVER" SAP NETWEAVER 7.0"
   Entry by Component"
   Application Server Java
   ===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder

Patch Level not reflecting in Support Package Levels after applying

Hello,
MDM_TECH 555_700 patch 01 are applied to A65. But the patch is not
getting reflected in the package level.
We are still unable to view the component in OCS queue, even after
uploading the component. Still the MDM_TECH 555_700 is showing
the patch level 0.
Please provide any solution to make the patch level reflect.
Thanks & Regards
Vijay

Hi Chaitanya,
I'm facing the same issue. We are upgrading Solution Manager 7.0 to EHP1. I cannot implement the Notes 791984 , 1015068 and 1022755 since the OCS is locked with the error in DDIC_Activation. Could you please let me know how did you implement the corrections?
Cheers,
Savitha

Kernel Patch level in JAVA Engin

Hello All,
I have planned to upgrade the kernel for JAVA engine (Version 640) and checked for the patch level. It appears as release 640 and i am not able to find the patch of the kernel(tried in system info page and jalunch -v option). Later I came through a thread in this forum which stated there is no patch level for Java Kernel. Is this right? If this is right then how do we upgrade the kernel for Java engine
Kindly clarify
Regards,
Anand

Hi,
In Java, kernel are identified in SPS not in terms of patch level like in ABAP systems. so whatever will your SP stack level of your portal, the same will be the kernel level of your portal.
So if you want to upgrade your portal kernel alone, you cant. You have to upgrade your whole Portal SPS to take your portal on new kernel and SP stack level. Latest SPS Available in the market place is 24 as of today.
With Regards,
Saurabh

Patch level

Hi All
I have upgraded from Sap 2005B Pl 34 to 2005B Pl 46 ... Now again i want to go back to 2005B Pl 34
can any body please tell me what is the safe way of doing it..
warm regards
anand

Hi Anand,
there is no recommended way for downgrading B1. So if you did a backup before updating your patch level, you can do it like this :
1. Backup your existing B1 installation
2. Uninstall your B1 complete
3. Install B1 in the patch level you need / backup level
4. Restore your backup
You also need to uninstall the clients and reinstall the older patch level.
Regards Steffen

Patch Level Info

Hi All,
Currently we are on SPS 14 (Patch #7) for Java and Patch #3 for KMC. How to look for this info from portal? Now we are planning to apply SP stack 16. This will push up the current patch levels. Is there any way we can find the patch level info for SPS16?
Please suggest.
Regards,
Subashini.

Hi Subhasini,
If you are using the EP in Netweaver 2004s or later, The portal version page under System Administration -> Support does not exist anymore.
Solution:
For finding out the version of installed products, launch the default page of the Web AS (http://<host>:<port>) and navigate to the "System Information" page. This page shows a table called "Software Components". For displaying the versions of all installed software and development components, click on the link "all components" in the upper right corner of this table.
With Regards,
Laksh.

Regarding the patch level..

Similar Messages

Maybe you are looking for