Regarding the process flow of project system

Dear Sapgurus,
I am working new ps project in our client place . The process which i mentioned for a ps flow is sales enquiry,
design approval, procurement, production, deliveryetc apart from this anything i mention so i request anybody to suggest the business process while starting a customer project and new project development.
regards,
muralidhar.t

Dear Murali,
Welcome to PS World.
See link which is given by Venkat Sir.(It shows process)
Its very tough to explain whole process.
Plz refer this link.
Deffntly it will help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
PS cycle
Re: Enterprise structure for PS
Re: Why we use Project system?
Regards
Chandra

Similar Messages

  • Regarding the process flow

    Hi All,
    My client is asking the process flow for the following scenarios can any one help me by providing the procees flow
    1.Depot Import Material Return Process
    2. Depot FOC process.
    3.Depot purchase return process.
    4. High sea Sales Config (if anything in SAP).
    Regards
    sunil

    Dear Murali,
    Welcome to PS World.
    See link which is given by Venkat Sir.(It shows process)
    Its very tough to explain whole process.
    Plz refer this link.
    Deffntly it will help you.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
    PS cycle
    Re: Enterprise structure for PS
    Re: Why we use Project system?
    Regards
    Chandra

  • How to specify the Process Flow Module with SQLPLUS_EXEC_TEMPLATE.SQL ?

    Hi, we have a couple of process flow modules that have PF Packages and Process Flows with the same name.
    E.g
    PFMOD1 (Module)
    FILELOAD (Package)
    PF1 (Pf)
    PFMOD2 (Module)
    FILELOAD (Package)
    PF1 (Pf)
    Normally we can specify "FILELOAD/PF1" as a paramater to the procedure SQLPLUS_EXEC_TEMPLATE.SQL in order to initiate the running of an OWB process flow but how can the system distinguish between modules ?
    Anyone done this ?
    Thanks
    Paul

    If you deployed the packages to the same location then the second deployment replaced the result of the first one (actually a new version of the process flow was created). You can execute only the latest version...
    Regards,
    Robert

  • Can anyone give me the process flow for MTBF report?

    hi all
        can anyone give me the process flow of MTBF Report?
    regards
    asha

    And Full form of MTBF is ???
    Regards
    Amitava

  • How to integrate the Process flow design into Workflow?

    Hi Guys,
    I created a process flow design in OWB. Now I need to integrate this design into Oracle workflow. How can I implement it? Process flow design is saved as an Jpeg or SVG file. Pls suggest the steps how can I do this? Im new to workflow and owb. Im using OWB 10g.
    Regards
    Kishan

    If you deployed the packages to the same location then the second deployment replaced the result of the first one (actually a new version of the process flow was created). You can execute only the latest version...
    Regards,
    Robert

  • Scheduling the Process Flows in Oracle Warehouse Builder

    Hi,
    Can you please let me know how to schedule the process flows.I mean to make the process flow to run on a daily, weekly basis etc.Where exactly we need to schedule the process flows.
    It would be great if you can help me out.
    Thanks
    Vinay

    You can schedule process flows the same way as you schedule mappings. See the following viewlet regarding the scheduling of OWB activities in Oracle Enterprise Manager (OEM):
    http://otn.oracle.com/products/warehouse/htdocs/oem_scheduling_viewlet_swf.html
    Regards:
    Igor

  • Deployment error during deployment of the process flow...

    i have made a program using OMB to deploy an OWB process flow. i have used tcl programming to run it on UNIX.
    when i run the program it gives me a strange error saying:
    an unknown error has occured during deployment .
    when i open the OWB design center to check the status i find the the process folw is stuck during the generation part and it continues but the generation never takes place.. for that i wrote an OMBALTER to alter the generation language of the mappings used in the process flow ,but it does not help...
    also after the error in the program when i see the mapping through the desibn center i do not see the original mapping when i open the mapping editor.
    then if I run the again program again i get the process flow deployed successfully ,obviously with the incorrect mappings.
    can anybody plz help me out with it???

    Hello!
    I searched metalink on error RTC-5161 and found a reference in note 392263.1
    It is a bug but there is a patch available ( bug 5504848, patch number 5525337).
    Read the note on metalink to check if you really hit this bug and apply the patch.
    Regards,
    Robert

  • What is the process of supporting project?

    what is the process of supporting project?

    Hello,
    Please check the following article:
    http://support.microsoft.com/kb/317789
    Microsoft does not provide support for the Crystal Reports products that are included in Visual Studio because Crystal Reports are SAP products. Support is only available from the SAP-provided free forum.
    For more information, visit the following website:
    SAP Community Network Forums
    http://forums.sdn.sap.com/index.jspa?categoryID=1
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What is the process for rollout projects and upgradation projects

    Hi All,
    Hope you all are doing well.
    I am a new bee in oracle apps. Just would like to understand  what is the process for rollout projects and upgradation projects and difference between them.
    Please help me. Thanks in advance.
    Regards,
    MM

    Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
    Where Technology Meets Talent

  • Where we can find the Rev rules in Project system

    Hi Team,
              Please tell me wher we can see Rev rec rules in Project systems.
    Thanks in advance
    Hemanth kumar
    9963554699

    Hello Hemanth,
    Perhaps if my guess is right hope you are looking for the below.
    Transaction OKG8 or the below path.
    Project System => Revenues and Earnings => Automatic and Periodic allocations => Results analysis => Edit Results analysis keys and version => Define posting rules for settlement to accounting.
    Regards,
    Ravi

  • Error in using External Process in the Process Flow

    I Created a Process Flow with an external process to Move the file from one location to another location,
    I gave the below parameters for the External Process
    COMMAND: move
    PARAMETER_LIST: ?F:\\FlatFiles\\in\\company.txt?F:\\FlatFiles\\error\\company.err
    SUCCESS_THRESHOLD: 0
    SCRIPT:
    The environment is
    Windows 2003
    OWB 9.2.0.8
    OWF Builder 2.6
    When I deploy and execute using Deployment Manager, it gave me the below error
    Starting Execution TEST
    Starting Task TEST
    Starting Task TEST:EXTERNALPROCESS
    CreateProcess: move move F:\FlatFiles\in\company.txt F:\FlatFiles\error\company.err error=2
    Completing Task TEST:EXTERNALPROCESS
    Completing Task TEST
    Completing Execution TEST
    What am I missing something here?
    Is my Parameters correct?
    GIve me the link where I can find more on using External process.
    Please...please...help me..
    Shree

    Nikolai,
    I have created a simple process flow which only calls the external process. The script is on the same host as the process flow is deployed to.
    I have used two diffent values for the command parameter.
    1. I placed the full path of the file in the command parameter and left the script parameter blank:
    COMMAND: /edwftp/ppas/scripts/ClearPPAS.sh
    PARAMETER_LIST:
    SUCCESS_THRESHOLD: 0
    SCRIPT:
    2.I placed the bash command in the command parameter and the full path in the script parameter.
    COMMAND: /usr/bin/sh
    PARAMETER_LIST:
    SUCCESS_THRESHOLD: 0
    SCRIPT: /edwftp/ppas/scripts/ClearPPAS.sh
    Both of these appear to work as they print out the statements inside the script but the files that are supposed to be removed still remain.
    Starting Execution EXTER_FILE
    Starting Task EXTER_FILE
    Starting Task EXTER_FILE:EXTERNALPROCESS
    Removing ActivatedAudit.dat...
    Removing ActivatedCustomers.dat...
    Removing ActiveAudit.dat...
    Removing ActiveCustomers.dat...
    Done!
    Create the Activated Customers data file...
    Create the Active Customers data file...
    Done!
    WARNING: Log file truncated - see RAB for further information.
    /edwftp/ppas/scripts/ActivatedCustomers.sh: /edwftp/ppas/log/ActivatedCustomers.log: cannot create
    /edwftp/ppas/scripts/ActiveCustomers.sh: /edwftp/ppas/log/ActiveCustomers.log: cannot create
    WARNING: Log file truncated - see RAB for further information.
    Completing Task EXTER_FILE:EXTERNALPROCESS
    Completing Task EXTER_FILE
    Completing Execution EXTER_FILE
    The permissions on the /log direcotry are 775. The user I register the file location with owns this directory.
    Can't think of anything else I have missed. I really appreciate your help :)
    Ryan

  • Getting an process-flow audit id in the process flow itself

    Hi,
    I am using OWB 11gR2 and want to capture the audit_id of the process flow itself at the process-flow level.
    I want to use this to pass it tru to the mappings in the process flow.
    I know how to get audit_id when you're in the mapping (get_audit_id), but i want the audit_id of the process flow when i am "inside" the process flow.
    When i have this i can let all of my mappings in the flow receive the same id.
    When i setup a parameter at the process flow and specify get_audit_id there it errors on me.
    Does anybody what to specify here ?

    ok,
    i figured it out myself and answered myself in another thread.
    Basically it goes like this:
    In the master flow you have sub-processflow objects which you want to pass along the audit_id of the master flow.
    So that you can pass along the same audit-id to every mapping in all of the flows.
    But it would be nice to be able to run sub flows independently from the master flows (for testing etc.)but still feed the same id(whatever that is) to the mappings in that process flow.
    And on the lowest level this applies to mappings as well: be able to run a mapping and get a id to store in a field.
    The same applies to feeding a process date to all the mappings in your flows(used for dwh purposes)
    How does this work on the mappings ?
    Create a mapping input parameter, put 2 params in it.
    One date, one number. The date part is easy: just put SYSDATE in it.
    The number part would ideally hold get_audit_id as default value. Unfortunately this generates an error.
    So put default value of 1 here. Create a constant on the mapping with value get_audit_id in it.
    Create expression that tests if input_param has something else than 1 as the value ; if so then there was no audit_id fed into the mapping by a process flow. Make the expression use the constant then. Use the output of the expression in your mapping.
    How does this work in process flows ?
    You'll have two different parts here:
    -feeding from flow to a sub-flow
    -feeding from flow to mapping
    Flow to subflow:
    You can not bind a flowparameter to subprocess paramter so you'll need to create 2 variables.(process date / audit id)
    Create two parameters, one date with sysdate as default, one number with 1 as default.
    Use assign operator to bind audit_id parameter to the audit id variable.
    Use another one to bind to the same variable, but specify parent_audit_id as value instead of binding it to the paramter.
    Use conditonal routing on these two assign operators to have one of these be executed.
    This will ensure that the variabel either gets parent_audit or the value of the input parameter of the flow.
    Use another assign op. to bind the date input to the date variabel.
    Bind the parameters of the sub flows to the variables.
    Flow to mapping:
    Use the same procedure as descibed above. Only difference here is that you can bind a mapping parameter to a parameter.
    This means that you'll don't need the assign stuff for the date parameter since you can bind the date parameter of the mapping to the input parameter of the flow.
    Hope this helps someone ...

  • OWB | Passing input to mapping in the process flow

    Hi,
    I have a process flow which calls a stored procedure which returns 2 values.
    I want to use the values returned from this procedure as an input in my mapping. My mapping has Mapping_Input_Parameters definined for these two inputs.
    These values are going to be load_date and the batch it belongs.
    I have created new params in the process flow edit under the mapping. The process flow executes successfully if I give the input params as a constant. When I do a binding with the out variable of the stored procedure I get a deployment error as "Internal error: OUT_D_LOAD_DATE cannot be converted to a constant value. Please correct the value. If the problem persists then please contact Oracle Support with the stack trace and details on how to reproduce it."
    Please let me know how to resolve this and if there is way to get the load_date in the mapping without actually having to call the procedure in the mapping. The load_date will change everyday and I need to read it from a table.
    Thanks!

    Hi
    If you have resolved the error please guide me also Since I am also facing the same error. (RPE-02040: Internal error: MYRAND cannot be converted to a constant value. Please correct the value. )
    I am using 10gR2, Here my test process flow is
    Start - > MyRand -> FindOddEven->end
    Here MyRand function will return a value, the function findOddEven will just do a mod of 2 and return 1 for odd numbers and 0 for even numbers. When I bind the OUT parameter of the MyRand to the IN parameter of the FindOddEven it is throwing the same error.
    Thanks in advance

  • What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?

    What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
    Can someone point me to a document that states the official policy stating their maximum review time?  This info used to be in the WLK1.6 FAQ but I don't see it for the HCK2.1 suite.
    Thanks!
    Al

    Ian,
    Thanks for your reply. Yes, I'm sure LabVIEW uses the (default) Windows timer. And yes, 1 mS is not guaranteed due to the preemptive nature of Windows (and even "RTOSs" to varying degrees), which is why I see about plus or minus 2 mS. 
    Apparently the Windows timer can be set by API calls. See: http://www.lucashale.com/timer-resolution/. Here's a screen shot of his TimerResolution.exe on a Windows 7 PC:
    Here it is on my Windows XP PC after I set it to "Maximum" (initially it was 15.625 mS):
    Notice that it sets the Maximum to less than 1 mS, which is supposed to be the max, so there are some bugs. Plus the Default button does not reset it in XP, but does work on Windows 7 or 8. (I know this is not the place to "debug" non-LabVIEW applications!)
    I'll bet LabVIEW sets it, too. The only caveat, as I said, is it looks like another application can change it, since the hardware timer is a "global" timer. I have not seen this issue in my LabVIEW applications, have you?
    I guess I need to do some more digging to see the code to set the timer, but it looks like the developers of LabVIEW have it figured it out.
    (FYI, I did notice that running my LabVIEW app (which gives about 2 mS resolution) or a C# app, which gives 15.625 mS resolution, does not affect what TimerResolution.exe reports, so I'm not sure if it's really working correctly. If I figure it out I'll post the results.)
    Ed

  • Describe the process flow in MM

    hi i m new to MM,
    can u pls describe the process flow in MM
    thanks

    Hi Sudeep,
    The MM flow is as follow:
    1) Purchasing Requsition -> sent by inventory dept to purcharsing dept
    2) Request for Quotation(RFQ)-> Purchasing Dept shall ask the vendors to give the quotation for the requested materials by inventory.
    3) Quotation -> Quotation is sent by vendors to the company
    4) Purchase order-> Based on all paramers of a quotation sent by vendors. Vendors are selected from whom the material has to be obtained. The company gives purchase order to the vendor.
    5) Good's receipt -> vendors sends the goods to the company with goods receipt
    6) Invoice verification -> this done based on good's receipt. this means that the ordered goods have reached or not.
    7) Payment -> payment is done based on invoice verification. this is (FI/CO) *-- Santosh Kumaar.M
    Full MM Transaction Codes Flow with table
    Purchase Requisition ME51N (Table - EBAN)
    RFQ to Vendor - ME41 (EKPO, EKKO)
    Raising Quotation - ME47 (EKPO, EKKP)
    Comparison of Price - ME49 (EKPO, EKKO)
    Creation of PO - ME21N (EKPO, EKKO, EKBE, EKPN, EKKN, EKPV)
    Goods Receipt - MIGO (MSEG)
    Invoice (Bill PAssing) - MIRO (BSEG)
    Goods Issue - MIGO (MSEG)
    Physical Inventory - MI01( Create doc) (ISEG)
    MI04 (Enter Count) (ISEG)
    MI07 (Post) (ISEG)
    Hope this helps.
    Reward if useful
    Shawn

Maybe you are looking for

  • How to fix error message; Mozilla Firefox unresponsive, script is not working - continue or cancel?

    While playing games especially in Facebook with the Farms and very little on other games. The message pops up like not in script not in sync (with FB-Zynga) and it pauses everything until click an options. I use continue and it takes a few seconds to

  • I can't fix the 'connection was reset' error.

    I've used this website for months without issue and suddenly it has stopped working in Firefox. I tried clearing cookies and history. I tried checking my proxy and firewall settings. I made sure the website was functioning for others. Help? == URL of

  • Replace drive with SSD

    Hi All I have a late 2008 Aluminium macbook. I was wondering about replacing the current har drive with an ssd drive. I know I should get fatser boot time etc but does anyone know what sort of extra battery life I would get by using 1. Thanks

  • Deleting all tra

    how do i delete all the tacks on my zen micro? i was using napster then stopped, , the songs that i got from there say "no license to play this track" so i cant use them anymore. i dont feel like deleting them song by song, so is there any ay i can r

  • 1st gen ipod touch to ipad 2 purchases?

    I have tv shows and movies on my first generation iPod touch and want to transfer all purchases to my iPad 2? Can someone please help me? I don't want to have to pay again for the movie and shows I already have paid for.