Regarding the SAP Query

Hi I have an SAP query ZGIINOP.
Which i have created using the Transaction SQVI. It worked fine in development client.
Now, I have transported it to Quality client were no problems while transporting.
But when i Executed it in Quality system. It is not working exactly the way it should. It is giving wrong results and it is taking so
much time to execute and give output.
Could any one please help me in this issue.
Thanks and Regards,
Venki.
Edited by: Venky Naga on Jun 29, 2009 4:10 PM

Hi,
Using the FM : RSAQ_GENERATE_PROGRAM try to generate/activate the SAP Query in the Quality system.
If  you have access to the SAP Query, Try to adjust the query in SQ01
SQ01-Menu->Query->More functions->Adjust/Generate Program/Activate
Hope this helps
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Jun 29, 2009 7:47 PM

Similar Messages

  • How to find the report for the SAP query (Query exists in table AQLQCAT)

    Hello Experts,
    I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
    Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing  AQusergroupquery name*  in transaction SE38.
    But unfortunately the program does not exists for the given paramenter.
    Could you please let me know how to get the report name for the SAP Query.
    Secondly please suggest any other way of checking the tables used in the SAP Query.
    Also the table name from where i can download the SAP Queries.
    Thanks in advance.
    Regards,
    Rahul Sinha

    I suggest you a simple method.
    Execute the query. When the selection screen is showed,  go to menu and click to SYSTEM->STATUS.
    Check the program name and double click it to access the program code.
    Search for tables or functions into the source code in order to understand where data are taken.
    If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
    Best regards.

  • To Find the SAP Query from the tranaction code or the program name

    Hi,
    I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query.
    <b>Please let me know how to find the SAP query from the transaction code or the program name.</b>
    Thanks and Regards,
    Rupesh

    Hi Rupesh,
    1 use FM
      RSAQ_DECODE_REPORT_NAME
    2. This is one of the best and easiest way.
    3. It will provide u the following info.
       WORKSPACE
       USERGROUP
       QUERY    
       CLIENT   
    4. Thru TCode U must know the program name first.
       This can be discovered using SE93.
    Hope it helps.
    Regards,
    Amit M.

  • Re : The SAP Query

    Can any one mention the database table name where the SAP Query details are saved means details of the Infoset , infogroup etc

    Hi,
    Try AQ* IN SE11 as well (displays list of tables with queries and all that).
    Goto table DD03L and try field names from RS38R and that table displays list of tables got the field names you specified .
    Check table TRDIR. It stores with generated program name
    If query name is AGENCY1 the table stores with AQZZ==/SAPQUERY/AGENCY1

  • Error in the SAP query for Assets?

    Hi,
    I am trying to make 2 queries related to the assets but it is not selecting the data may I know why and where I am doing wrong.
    I have joined the tables ANLA, ANLC, ANLP and ANLB.
    Fields that have been selected are as follows:
    Asset Subnumber ANLA-ANLN2
    Asset Class ANLA-ANLKL
    Asset description ANLA-TXT50
    Company Code ANLA-BUKRS
    Serial number ANLA-SERNR
    Main Asset Number ANLA-ANLN1
    Asset Subnumber ANLA-ANLN2
    Asset Class ANLA-ANLKL
    Asset description ANLA-TXT50
    Company Code ANLA-BUKRS
    Serial number ANLA-SERNR
    Main Asset Number ANLA-ANLN1
    Fiscal Year ANLC-GJAHR
    Ordinary depreciation posted in the current year ANLC-NAFAG
    Planned ordinary depreciation for the year ANLC-NAFAP
    Accumulated ordinary depreciation ANLC-KNAFA
    Cumulative acquisition and production costs ANLC-KANSW
    Asset Subnumber ANLA-ANLN2
    Asset Class ANLA-ANLKL
    Asset description ANLA-TXT50
    Company Code ANLA-BUKRS
    Serial number ANLA-SERNR
    Main Asset Number ANLA-ANLN1
    Fiscal Year ANLC-GJAHR
    Ordinary depreciation posted in the current year ANLC-NAFAG
    Planned ordinary depreciation for the year ANLC-NAFAP
    Accumulated ordinary depreciation ANLC-KNAFA
    Cumulative acquisition and production costs ANLC-KANSW
    Transactions for the year affecting asset values ANLP-ANSWL
    Planned ordinary depreciation for the year ANLP-NAFAP
    Ordinary depreciation posted in the current year ANLP-NAFAG
    Ordinary depreciation to be posted ANLP-NAFAZ
    Asset acquisition year (currently not used) ANLP-ZUJHR
    Depreciation calculation period ANLP-PERAF
    Original useful life in years ANLB-NDURJ
    Depreciation key ANLB-AFASL
    Please tell me where SAP query is no working and what shall I do to make it work.
    Thanks and regards
    Nitin

    Thanks !!!!

  • Output Technical Field Names in the SAP query Output

    Hi Experts,
    I am new to SAP Query/ABAP Query or Quick Viewer. Just would like to know if there is a way whereby I can print the technical field names as opposed to the English field headers. For example I want to print BUKRS in the place of CoCode.
    I have a vague feeling this could be possible through custom coding in SQ02 but have no idea which code section to choose.Any inputs greatly appreciated.
    thanks in advance,

    Hi Sreegopalan,
    Open your infoset in SQ02, by default in the left hand side you'll be having the tables that you have selected, double click the field name which you want change the long text, it will open a attributes window below your field group. Change the header data text as you wish.
    Please find the query documentation in the below link.
    [http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf]
    Regards,
    Nandha

  • Regarding the SAP big tables in ECC 6.0

    Hi,
    We are having SAP ECC 6.0 running on Oracle 10.2g database. Please can anyone of you give fine details on the big tables as below. What are they? Where are they being used? Do they need to be so big? Can we clean them up?
    Table          Size
    TST03          220 GB
    COEP          125 GB
    SOFFCONT1      92 GB
    GLPCA          31 GB
    EDI40          18GB
    Thanks,
    Narendra

    Hello Narendra,
    TST03 merits special attention, certainly if it is the largest table in your database. TST03 contains the contents of spool requests and it often happens that at some time in the past there was a huge number of spool data in the system causing TST03 to inflate enormously. Even if this spool data was cleaned up later Oracle will not shrink the table automatically. It is perfectly possible that you have a 220 GB table containing virtually nothing.
    There are a lot of fancy scripts and procedures around to find out how much data is actually in the table, but personally I often use a quick-and-dirty check based on the current statistics.
    sqlplus /
    select (num_rows * avg_row_len)/(1024*1024) "MB IN USE" from dba_tables where table_name = 'TST03';
    This will produce a (rough) estimate of the amount of space actually taken up by rows in the table. If this is very far below 220 GB then the table is overinflated and you do best to reorganize it online with BRSPACE.
    As to the other tables: there are procedures for prevention, archiving and/or deletion for all of them. The best advice was given in an earlier response to your post, namely to use the SAP Database Management Guide.
    Regards,
    Mark

  • Regarding the SAP Business objects Server configuration

    Hi Experts ,
    I was newly entered in to SAP Business Objects .Kindly i am requesting can you please let me know the follwing details .
    1) Latest server configuration of the SAP Business Objects .
    2) Latest version of the Crystal reporting / Desktop Intelligance / Web Intelligance / Universe.
    3) And also if do you have any document releated to the server configuration of the SAP Business objects kindly can you aatch the mail.
    Thanks and Regards,
    Vijay.

    The latest available version of the BO Server/Web Intelliggence /Dekstop Intelligence is XI 3.1 SP3 with FP 3.4.
    The latest available version of CR is CR 2008 SP3 with FP 3.4.
    You can find the latest documentation for Business Objects here:
    http://help.sap.com
    Regards,
    Stratos

  • Regarding the SAP PI 7.1 ....installation...!

    Hi All,
    Can any one give me any links or Documents where i can find information about what all one needs to get the Access for the SAP PI and ESR to Run in the System ....! with an example scenario ...!
    Thanks ,
    Aziz khan

    Hi Aziz,
    please check given link maybe useful for you .
    http://service.sap.com/installNWPI71
    Regards,
    Amit

  • Regarding the SAP PI 7.0  and MDM 7.1 ....!

    Hi All,
    As i was going through the Documents on the SAP PI 7.1 ...where i came to know that we have a seperate MDM Adapter which is used to Exchange Data Between SAP PI 7.1 and MDM 7.1 ....then i was wondering that how can we use SAP PI 7.0 to connect with SAP MDM 7.1 ?    IF SO , then are what all we need to Do in SAP PI 7.0  ? and is there any restrections that we need to look for while connecting between  SAP PI 7.0  to MDM 7.1 ?
    I hope i may get some answers ....!
    Thanks in advace
    Aziz khan

    >
    Aziz khan wrote:
    > Hi All,
    >
    > As i was going through the Documents on the SAP PI 7.1 ...where i came to know that we have a seperate MDM Adapter which is used to Exchange Data Between SAP PI 7.1 and MDM 7.1 ....then i was wondering that how can we use SAP PI 7.0 to connect with SAP MDM 7.1 ?    IF SO , then are what all we need to Do in SAP PI 7.0  ? and is there any restrections that we need to look for while connecting between  SAP PI 7.0  to MDM 7.1 ?
    >
    > I hope i may get some answers ....!
    >
    > Thanks in advace
    > Aziz khan
    https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/604b3c0c-5b6c-2b10-cc83-a7af75c70eaf&overridelayout=true

  • " Query regarding the SAP BO "

    Dear  guys,
                    Can anyone tell me the  version of data integrator ,we are using now-a-days .
    waiting for ur result .

    What do you refer to as BO ? SAP Business One could be simplified as SBO or B1.  Only Business Object could be BO.  Post your question there if that is true.
    Thanks,
    Gordon

  • Regarding the select query

    Hi Experts,
    I have a select query as follows:
    select field1 field2  from db1 into table it1.
    Now suppose the it1-field1 contains values a,b and c.
    Now I want to select fields a,b and c from another db table db2.
    Instead of hard coding like this:
    select a b c from db2 into table it2.....
    How can I do this?
    Points will be awarded.
    Regards,
    Soumya.

    Hi Soumya ,
    Pleas use FOR ALL ENTRIES syntax , in this way you can select the records from db2 which are available or selected in db1.
    Like Header And Item table.
    You select records frm header table . then for corres ponding header records you select from detail table db2 .....
    Condition is the field containg a,b,c  is key field in both tables ...
    Reward points if it helps you .
    Regards
    Amber S

  • Experience regarding the "SAP Associate Enterprise Architect"certification

    Hi
    I would appreciate some input from someone who has taken the above mentioned certification.
    Is the Curriculum sufficient and (roughly) how much preparation is needed before besides the various courses before the certification?
    Kind regards
    Simon

    passing for this exam requires a broad and thorough understanding of various aspects of eSOA and SAP-products combined with essential architecture skills. it is a pretty new exam, first announced at TechEd 07. too many failed the exam here in the Netherlands, earlier this year. SAP gave those people a second chance.
    Edited by: Mendel Koerts on Apr 7, 2008 3:23 PM

  • Urgent Regarding the SAP Script

    Hi all,
    I am developing a SAP-Script in which there is table like
    Description Resuts Parameters
    uline
    values values values
    My doubt is using the driver program the values has to be printed. Can anybody provide the piece of code for these requirement.
    Another doubt is in this script there 2 pages . But in the print preview i can see only 1 page . In the page setting i have given the next page as page2 . But still i m facing the same problem. In page there is no main page only footer, page no, and some std descptn window is available.
    Depending on the 1 field i want to print the send field value i have change these things in the driver program so that the correct can be printed in the form.
    With Regards,
    Srinivas.

    hi,
    How to Upload graphics (IMAGE) to your Sapscript?
    Command in your Sapscript
    /: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
    These are the steps to be followed for uploading graphics in R/3 system
    1. First save the file as BMP
    2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
    make it Zoom as 100% and save as *.TIFF
    3. Open SE38 and execute program RSTXLDMC
    4. Give your TIFF file path name
    5. Select Bcol (for Color)
    6. TEXT ID will be ZHEX-MACRO-*.
    7. Inplace of * write your own logo name (ZCOMPANYLOGO)
    8. Execute the program
    9. Now Goto SE71 create your ZFORM
    10. Create logo window
    11. Goto text element of logo window
    or
    In 4.6x :-
    1. Goto SE71 Change the mode to GRAPHICAL
    2. Choose the Graph Tabstrips
    3. Now type in some name for the LOGO WINDOW
    4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
    5. The code will be written automatically. You just need to drag and drop wherever you want
    the graphics to be.
    /: INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
    Message Edited By ,
    Vani

  • Regarding the SAP way of LOGIN

    HI ,
    CAN anyone let me know how does a SAP SRM  login to my Catalog application. I have developed my application in PHP.
    to move further in my development i need to know this ,..
    Thanks
    Ajai

    Hi,
    You can find the Catalogs Call Structure within the SPRO customizing setttings if you were not sure of this:
    -> SPRO
    -> Supplier Relationship Management
    -> SRM Server
    -> Master Data
    -> Define External Web Services..
    Then in here you will see the list of catalogs. It will be either in the Standard Call Structure or the Integrated Call Structure.
    I hope this helps,
    Lisa

Maybe you are looking for