Regarding the scheduling of F110 upto proposal

Hi all
Is it possible to schedule F110 upto the proposal. After that the AP manager will edit the proposal & block / unblock the transaction & execute the final run.
Kindly let me knwo what is the setting to be done in F110S T-code.
Regards
R.Karthigayan

Hi Karthigayan ,
Yes it possible ,You can shedule the payment not for proposal.
create the proposal ,block,unblock the transaction and payment run execution those are  doing through authorisation .So check with basis person for individual task authorisation.
Regards
Surya

Similar Messages

  • Like ot change the View of F110 (Payment proposal)

    Hi
    The veiw of the payment proposal using Tcode F110 is stamdatd as attached. and i would like to change this like as  ALV Grid ..Please suggest how can i change the same.

    Hello,
    In O7FB you can define the fields that can be used to sort the payment proposal payment.
    You can define a default layout to be used in the Display/Edit Payment Proposal, and then in F110 specify the sort sequence once thelist is displayed.
    FAKP > Periodic Processing > Payment autom.pmnts > Line Layout
    FAKP > Periodic Processing > Payment autom.pmnts > Default values >
    and for transaction FBZ0 select the defined Layout
    From release 5.0 the payment proposal processing was changed to the ALV. With this tool the line structure is determined - as in all ALV lists -within the application. During the use of the ALV the "old" Customizing settings are obsolete. Hence in your case with ALV option, the Proposal -> edit -> Settings -> Line Layout is greyed out. The note number 617492 is useful to understand this new funcionality.
    As an alternative also I would suggest you to use proposal list , program RFZALI20.
    I hope this helps.
    Oscar

  • How Does the scheduler works with ODI engine

    Hi All,
    I am new to the ODI and I was going through the documents over the web regarding the scheduling.
    Can anyone please let me know how does the Scheduler in ODI is coupled with the ODI engine.
    How does the internal scheduler works and how does the external one works. What are the processes the it calls while invoking the scheduler.
    Your help will be highly appreciated.
    Thanks,
    Sumit

    Scheduling in ODI is controlled by a special type of ODI agent, strangley called the ODI scheduling agent. This agent is installed as a service and as well as being responsible for all tasks associated with a normal agent is also responsible for managing ODI jobs based on any scheduling information associated with an ODI scenario. All scheduling information is stored in the ODI repository and the scheduler agent reads from this to determine which jobs/scenarios need to be executed and when.

  • Ristrict the payments in F110

    Hi Experts,
    As per my client requirement,
    If i run the F110 by taking posting upto date in the parameters screen as today i.e.08/12/2011. And i run the proposal and i will got the open items which are due upto now. But as per my client in this list payments has to be clear upto 31.06.2011.
    Is there any solution on this issue.
    Regards
    Podapala

    Thanks for your reply.
    My questionn is if i enterd 08.12.2011. system will bring all open items upto know.
    For ex. 1 invoice is due on 01.06.2011         amount 10000
                 2nd invoice is due on 30.06.2011                  20000 
                 3rd invoice is due on 01.07.2011                  15000
    If i run the payment run from those proposal documents which are due upto 30.06.2011 means 30000 has to be paid. and 15000 has not to be paid.
    Regards

  • Planned delivery cost for the scheduling agreement

    Hi Experts
    1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
    I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent.  Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
    Appreciate if you can suggest something in this case Urgently .
    2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post.  Please suggest if any alternate solution is available.
    Regards
    Arvind

    Hi,
    As you know if the delivery cost document is not posted during GR the
    delivery cost is not proposed during invoice (MIRO). Planned delivery
    cost will be proposed in invoice only when there are records in EKBZ
    table. The EKBZ table will be updated when delivery cost is posted
    during GR itself.
    Please ensure in the PO itself thatr the conditions have been defined
    properly with the relevant amounts and values.
    During GR when planned delivery cost conditions are present in PO,
    system checks for values in amount field. Then only appropriate
    calculations will be done for delivery cost and planned delivery cost
    document will posted during GR and hence updates EKBZ table.
    Solution to this issue is described in below steps,
    1) reverse the invoice document
    2) reverse GR document.
    3) You have to give values in amount field in relevant conditions ZGDS
       in the PO.
       If you face any issues changing the values, delete above conditions
       and put it again manually and give values in amount field also.
    4) Post GR once again, delivery cost document will also be posted.
       You can check it in PO history.
    5) During invoice select Item + planned delivery cost and post the
       invoice. If you need planned delivery cost to be posted separately,
       then you can post individual invoice for item and delivery cost.
    Please note it is not possible to post delivery costs for documents with
    multiple accountassignments. 
    For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
    Best Regards,
    Arminda Jack

  • Reasons for not creating a DME file in the payment program (F110)?

    Hi,
    I am using the payment program F110 for customer payments.
    A payment run was carried out:
    Parameters have been entered. Payment proposal has been created. Payment run has been carried out. Posting orders: 17 generated, 17 completed.
    However, the DME file was not created.
    What could be the reason?
    Thank you.
    Kind regards,
    Linda

    Solved. 
    Someone has changed the variant of the payment program.
    The DME file name had disappeared.

  • Firming the Schedule Lines in Sch.Agreement

    Hi , I have done the  following to firm the schedule lines in Scheduling agreement.
    1. Firm Zone as 30 days
    2.Tradeoff zone days as 60 days
    3.Binding MRP indicator as NULL(Lines not changeable within Zones)
    4.In OMIN , Firm Schedule lines enabled for the MRP group
    When i run the MRP, schedule lines are getting created with Firm Indicator (*) for the requirements lying within these zones. After transmitting the schedule lines to vendor , if i change the requirement again, the schedule  lines within Firm Zone are getting adjusted as per the new requirment. I dont know whats the purpose behind maintaining these Firm Zone and Trade off Zone.
    Pointers are much appreciated.
    Thanks and regards,
    Milton Isaac

    Hi,
    Rolling delivery schedules issued under scheduling agreements are divided into different time zones indicating the degree to which lines of the schedule are binding.
    Firm zone (zone 1) (go-ahead for production).
    The schedule lines within this zone count as firm and thus as fully binding. If you cancel a schedule line that falls within the firm zone, the vendor is entitled to charge you with both production costs and the costs of procuring input materials incurred by him as a result of the cancellation.
    Trade-off zone (zone 2) (go-ahead for procurement of input materials)
    This is the "semi-firm" zone, giving the vendor the go-ahead to procure necessary input materials for the manufacture of the item ordered. If you cancel a schedule line within this semi-firm zone, the vendor is only entitled to charge you the material costs. Schedule lines falling within this time zone are thus less binding that those falling within the firm zone.

  • Delivery before the schedule line date in scheduling agreement.

    Hi All,
    I have a situation where in I am using JIT delivery schedule for processing the delivery requirement from customer. In this, lets say, I have a schedule as 08/05/2009 for material A to deliver 1000 qty and the material is made available to me after production as of 07/05/2009 and I want to despatch the material on 7th only and not on 8th. The system does not allow me to do this.It allows me to make a delivery only on 08/05/2009.
    Is there any alternative to this and is this SAP standard behaviour.

    I think you can change the schedule line date in scheduling agreement itself and do the delivery.
    regards,
    Sudhir

  • BAPI for VA02 to check availability & update the Schedule lines

    Hi Experts,
    Is there a BAPI which can 'check item availability' & update the Schedule lines for the same order?
    I have checked 'RV_AVAILABILITY_CHECK' 'BAPI_MATERIAL_AVAILABILITY' 'SD_BACKORDER_UPDATE'
    but it is not solving the purpose.
    Kindly give your suggestion for the same.
    Thanks.

    Hi,
    Please let me know if you were able to achieve this functionality. I have a similar requirement wherein I need to check for the material availability and update the schedule lines in the scheduling agreement. I checked the FM SD_BACKORDER_UPDATE, but it doesn't seem to be helpful.
    Regards,
    Dawood

  • Regarding multiple schedule lines in sales order with same date

    Hi All,
    we create the Orders from RFC and the orders are going to Multiple Schedule lines for the same date.
    period       delivery date          ordered quan       confirmed quantity
    D     10/11/2007                10                    0
    D     10/11/2007                 0                     10
    here for the same date in first line it is not confirming and in the second line it is confirming the quantity for the same date.
    On what conditions it is possible??????
    Any one have the solution for this Please send it to me [email protected]
    Regards,
    Prasad

    Just check the schedule line details i.e go to schedule line---shipping. You will find that although the del. date is same in both the case but the timings were different e.g material availability time etc will be different in both these lines. So though the dates may be same its time difference that's causing the second schedule line.
    Reward points if useful

  • How to change  delivery  block for all item in the schedule lines via va32

    dear sap expert:
    i onle can  change delivery block for one  sales order item in the schedule line  every times via va32,it will take so many time because there are hundreds of item  in a sceduling agrrement. how to change all the item  one times.
    please give me a way to resovle the problem.
    best regards.

    dear:
      the fast change function cann't resovle the problem,i first double click the item of schedule agreement  ,then select the schedule lines option, finally in the delivery block input the reason of bolck.
    best regards.

  • Link between the Schedule Lines and the GR document

    Hi
    I would like to find the link between the Schedule Lines (of Scheduling Agreement) and the GR document. i.e. which GR has been made against which Schedule Line. I have checked the tables EKET, EKBE, MSEG but there is no link with the Schedule Line, I found the link only with the item number there.
    Thanks
    Prashanth

    Hi
    At the time of posting the GR for a SA you will be not posting this with reference to the Schedule line of the SA item. So system will always update the GR document against the SA item and update qty on the schedule line.
    May be this is the reason we donot have any direct relation ship to material document and Scheclue line
    Thanks & Regards
    Kishore

  • Firming the schedule lines from MRP

    Hi All,
    I have a scenario where I generate the scheule lines from the total planning run for the material with the help of schedule line indiator = 3.
    I want these schedule lines should get automatically firmed. Which are the various ways by which I can do this?
    Regards,
    MHP

    Dear
    Using MRP Type with Firiming like P1 , P2 etc is the best way to deal with this situation .
    However , there is option in Schedule Line itself that u can give firming period and in that period schedule lines r firmed. Go to ME32L enter ur Scheduling Agreement Then select ur material and click on Additional Data (Shift+F5). There under Scheduling Control 'Firm Zone' field is there, try with this option and see what is sresult?
    If the date of a schedule line lies within the firm zone, the vendor has the go-ahead to produce the relevant quantity with the assurance that the orderer will bear any and all material and production costs associated with the scheduled quantity in the event of subsequent cancellation by the latter.
    1. Another way of handling your issue is by using the manual firming .
    2. In mdo4 in the Edit menu u will find a Set firming date.
    3. Now you can select this and this will give u a popup for entering a date.
    4.When u give a date in this and hit enter.
    Also please note delivery schedule lines in ME38 (even it is created automatically), in Planning time fence, will get affected by MRP run.
    Hope clear to you.
    Regards
    JH

  • Firming of the schedule lines

    Hi,
    in MD04 we can see the firm indicator for some of the schedule lines. We aware of that this indicator is set based on the firm zone period and the schedule release date.
    Apart from firm zone is there any other parameter makes the schedule line firm ( except manual change) Please clarify.
    This is the very urgrent req from business so your immediate repsponse is really appreciated.
    Thanks
    Raj

    Hi
    You can firm all schedule lines which are printed or transmitted to vendor by customizing in OMIN for your plant and material group.
    Or if you create schedule line manually.
    Regards
    Antony

  • Delivery date determination in the schedule lines

    Hi,
           I have a question on the delivery date determination in the schedule lines of the sales order. If the goods issue date in the schedule line has been determined as 17th Aug 2009, and the transit time is 3 days. What should be the delivery date that will be proposed? Should it be 10 + 3 equal 20th Aug 2009, or it will be 21st Aug, which is the the following day of 10 + 3 ? I simulated in the sales order and it gave me 21st, my understanding was it should be just 17 + 3 = 20th Aug.
    hope anyone can shed some light on the above. TQ
    krt

    Hi ,
    This is what F1 help says
    Rounding-up period for delivery scheduling (in days)
        The amount of time that the system automatically adds as a safety margin
        to the estimated time required for processing a delivery.
    Use
        The system adds the rounding-up margin to the time estimates for a
        delivery, regardless of whether the system
        o   Calculates the times from data in the master records, or
        o   Simply uses the default times that apply to the relevant shipping
            point.
    This is F1 Help of rounding days and not my words..... you can also check in OVXD t-code.
    Thanks,
    Raja

Maybe you are looking for