Regarding the Source systems

Hi,
Can anyone plz let me know what are the source systems that provide various master data....
and their Versions also...
For eg: Customer master -- CRM systems
Thanks & Regards
Guna

Hi Guna,
I not understood the background of the question however some of source systems with their masters...
SRM - Suppliers (Vendors)
CRM - Customers
ECC or R/3 - All (HCM - Employees, MM - Materials ....)
BI - All
Retail - Products
Legacy - Anything !
+ An

Similar Messages

Data Source Z*** is not defined in the source system

Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?

Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error occurred in the source system

Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
    The sequence for creating time series in LiveCache is:
    1. Characteristic value combinations are created which in turn create
        planning object in the system
    2. The combination of version, planning area, and planning object is
        initialized, creating time series in LiveCache. This combination is
        so to speak the LiveCache anchor.
    This error occurs if
    o   New characteristic value combinatons have been created for the
        master palnning object structure that is assigned to the planning
        area, but the time series objects were not created.
System response
     Processing cannot continue.
Procedure
     There are two methods of creating time series objects for individual
     characteristic value combinations:
         a) Re-initialize the version without deleting the time series
             objects beforehand.
         b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
     In general SAP recommend that when you generate new characteristic value
     combinations, you set the Create time series objects indicator. This
     prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
Tyson

Hi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang

How to change the source system for just a datasource

Hi,
Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
Any idea about how to proceed ?
Regards,
Joan

Hi,
If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
Any idea about how to proceed ?
Regards,
Joan

InfoSource is not defined in the source system

Hi,
We are getting error 'InfoSource is not defined in the source system' while extracting data from Planning book to Cube in APO.
Data is coming up to Extrack checker ( RSA3 ) but not comming to PSA.
Please help me.
Thanks
Subba Rao

Hello Subba,
Have you replicated the datasource on the BW side? If you use the 3.x data flow then you also need to assign the datasource to and infosource.
Best Regards,
Des

Processing error occured in the source system

Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
In the source system apllication log the following warning message displyed.
<u>No assignment of payroll data to BW month for country grouping 99</u>.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
If any one come accross this , please provide good inputs....
Thanks & Regards
Kumar

I have the same problem.
The following text is ment to help me.
Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
best regards
Ingrid
Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
Diagnosis
No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
System Response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.

Finding messages sent through ABAP proxy in the source system

Hi All,
I have a Proxy to HTTP scenario, wherein the messages are landing up in error at reciever for some value in the payload.
I tried to look for the messages in XI, hwever they have been successful thru it and are deleted now.
Also I tried to look for the messages in the sender R/3 system in SXI_MONITOR, hwever i dont have the access to this tcode there.
Is there any other way these messages can be looked for in the R/3 system?
Regards,
Diptee

Hi All,
I could not find the messages in the source system, they seem to have got deleted (as they are old).
Also i was trying to achieve the requried in the production environment, and so needed to know if the messages can be looked for by any means other than the report 'Monitor for Processes XML messages'.
Thanks a lot.
regards,
Diptee

How to Identify the Source System in a Transformation Rule?

Hi,
   In a 3.x system if I needed to identify the source system, the interface had a parameter SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS. I do not see the same in a Transformation Rule. Can anyone tell me how can I make a decision in my transformation rule depending on the Source System?
    Say for instance I want to change the following Update Rule from a 3.x System to a Transformation in BI7:
IF SOURCE_SYSTEM = 'ABC'.
   RESULT = 1.
ELSEIF SOURCE_SYSTEM = 'A11'.
   RESULT = 2.
ELSEIF SOURCE_SYSTEM = 'AZ1'.
   RESULT = 3.
ELSE.
   RESULT = 0.
ENDIF.
Can anyone help? Points will be rewarded.
Regards,
Kazmi.

Hi Siggi,
   But how would I know the Request ID within a transformation ? REQUID is the key of the table rsbkrequest ? The interface of the transformation method has the following parameters:
IMPORTING
    request     type rsrequest
    datapackid type rsdatapid
    SOURCE_FIELDS
   EXPORTING
     RESULT
So all I can be aware of is the Request Name and the Data Packet Number. For instance when I took your approach, I got the Request Name as "DTPR_8E3VKVN0RJPDNXAKMP0PZJ99B" now I cannot look up with this against the key of the table because REQUID is a number field. Now, if I look up against the field "Data Transfer Process ID (DTP)" I do not find any entry in this table.
   Any more info?
Regards,
Thanks.

Identify the Source System in CRM BADI

Hi,
I need to write the code in ORDER_SAVE BADI in CRM based on the source system. For example, When i create the quotation in PCUI i need to validate few fields. Suppose i have created quotaton in R/3 and it gets transfer to CRM and i need validate few more fields.
How do i findout in BADI whether the source system is PCUI or R/3? I have checked the SYST table but no difference in both the case. Anyother way to findout this.
Thanks in advance.
Regards,
Bala.c

Hello Bala,
In the ORDERADM_H structure of the CRM_ORDER_READ or in the CRMD_ORDERADM_H table you find a field called LOGICAL_SYSTEM. In that field the RFC destination of the source system (source system = where the order/transaction was created) will be stored.
For PCUI this field will have the RFC destination of the CRM server itself.
For R/3 it will have the RFC destination of the R/3 system.
Hope this helps,
Reward points if useful!
Regards,
Joost

CLIENT of the source system in the Transfer Rules

Hi,
Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
Thanks in advance for your help.
Regards,
Melwyn

hi,
i think if your bw dev and prod client is different you can try in transfer rules
if sy-mandt = xxx. ( bw dev client number)
result = 'yyy'. (source system dev)
else.
result = 'zzz'. (source system prod)
endif.
or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
hope this helps.

An error occurred in the source system, DBIF_RSQL_SQL_ERROR

Dear All,
last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
the error i found
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"BWFIR_READ_BSID_CPUDT_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU10"
"BWFIR_READ_BSID_CPUDT_DATA"
please any one help on this issue
Advance in thanks
Regards
Priya

Hi,
Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
Can you please let me know if it got fixed.
Thanks & Regards,
VR

No Idocs arrived from the source system.

Dear All,
Please read this issue carefully.
Error Message is that
"No Idocs arrived from the source system."
In the Details Tab:
Trasnfer( IDOCS &TRFC):Missing Messages or warinings.
Request IDOC:Application Documnet posted from BW side and it is green..There is a request BW IDOC number sent to R3.
Where as an InfoIdocs 1:Sent not arrived :Data passes to the Port is ok.
Here i can see there is one idoc frm OLTP R3 side ansd no incomming idoc for BW side
I went to r3 side bd87 and found that idoc is posted well with status 53.
This is happing in Bw for each iinfopcakage is running?

Hi,
go through this link...
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=noidocsarrivedfromsource+system&adv=false&sortby=cm_rnd_rankvalue]
System.-> Check RFC connection and clear/process stuck IDOCs.
Idocs Missing or No Idocs arrived from source
For this check the TRFC que(SM58).If any Idocs r strucked up there execute them manually.checkin sm58 transactions, you can check the status of your Idocs using BD87 in R/3. Idocs may not be processed because of load on system. You can process them manually from context menu.
And go to BD87 to process the idoc's ..
check which idoc has to process...select the idoc and click process ..Then It will push the data into the data targtes,
Hope it will help you;
regards,
NR

Restoring the source system connection in BW

Hi all,
Ive been trying to upload data for 2 of my infocubes, and the extractions are bouncing. The message in R/3 is told me to check the connection. The RFC are fine. But when I tried to restore the source system connection (RSA1 in BW), it sent me the following error messages:
1.- Basic type ZS 118 does not exist.
2.- The following error in the source system:
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
The description in each error is:
Error #1:
Diagnosis
    IDoc type ZS 118 could not be found.
System response
Procedure
   Please enter an IDoc type that exists.
Error #3:
Diagnosis
    Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
System response
    Error when sending data to BW.
Procedure
    Enter IDoc type ZS 118 .
They told me this IDocs are created automatically by the connection. Is that true?
How can I fix this, so that I can restore my connection and do the data extraction?
Thanks a lot
Regards,
Vic

Hi Victor Tostado
1.- Basic type ZS 118 does not exist.
Type Transaction WE30. Check iDoc types Obj. Name : RSSEND -> press F7
a.) Enter 'RSSEND' in the Obj. Name field. You will see an entry similar to the one below:
          RSSEND                          Data transfer from the source system (template)
                [-] E1RSSH               Data transfer IDoc: Header information
                         [+] E1RSHIE    Data transfer Idoc: Hierarchy header information
                                E1RSTXT   Data transfer IDoc: Texts
     b.) Enter RSREQUST in the Obj. Name field. You will see an entry similar to the one below:
            RSREQUST                    Data request to the source system
                 [-] E1RSRH               Data request IDoc: Header segment
                         [+] E1RSRHI     Data request IDoc: Hierarchy
                         [+] E1RSRTX    Data request IDoc: Texts
                         [+] E1RSRMD   Data request IDoc: Master data
                         [+] E1RSRIS      Data request IDoc: InfoSource
     c.) Enter RSINFO in the Obj. Name field. You will see an entry similar to the one below:
            RSINFO                         Info IDoc
                [-] E1RSHIN             InfoIDoc: Status segment
                        E1RSPIN            InfoIDoc: Data packet segment
                        E1RSEIN            InfoIDoc: Error segment
d.) If any of the above do not exist, contact your BASIS Team.
2.- The following error in the source system:
Type Transaction SM59. Maintain RFC destinations
a.)     Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding your source system d.) Logon Information should contain source system client and name & password for you remote logon.
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system
Type Transaction WE21. iDoc Processing Ports.
receivers port is not available go to WE21 -> create port
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 versiond. RFC Destination should be one created in SM59. If non-existent then create one.
I) Type Transaction SE16. Data browser (for R/3 -> BW Connections)
Enter RSBASIDOC Print out copy of all entries in table.
II) Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOC table for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missing entries.
Regards
Sangram Sutar

Job terminated in the source system

Hi BW ens,
when i try to load data i am getting error as below.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
**when i tried to see in the source system it is showing like :Extrapolation cannot be carried out because no inst. has been allocated"and "ABAP/4 processor: CONVT_NO_NUMBER:**
**pls let me know how to overcome this problem in loading.**
regards
Ravi

Hi Ravi,
U can check the Job logs in SM37 !!!!!
Apart from that i think there is a lock that has occured ,goto SM12 and unlock the objects.
Reload the data at the point where the error has occured ,It should be fine.
Rgds
SVU123

Regarding the Source systems

Similar Messages

Maybe you are looking for