Regarding the upgradations from the bw3.5 to bi7.0 reporting
Hi Experts,
Can any one help me how i have to upgrade the reporting tool from the sap-bw 3.5 to sap-bi7.0 . right now allready we are having the sap-bw 3.5 version right now i want to upgrade it to the sap-bi 7.0 .I need clearly with the help of the steps.
Bye.
Hi Vijay,
please check the following links:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6a19f233-0e01-0010-6593-c47af5a8df3b
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/90d58e76-e1b0-2a10-8b89-af8ceacf4b09
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/2082536#2082536 [original link is broken]
Regards
Erwin
Edited by: Erwin Buda on Feb 9, 2009 11:35 AM
Similar Messages
-
Why cannt i buy the upgrade from the icloud mermory on my iphone 6
why cannt i buy the upgrade from the icloud mermory on my iphone 6 im trying to get the 20gb but it wont let me buy it at all
If your contacts are not syncing with any external service, meaning that the contacts only exist on the iPhone, you may be able to take advantage of a particular iOS backup limitation. Your backup does not contain all of your contacts*, so if you restore your iPhone and reload your backup, that may skim off the contacts that were loaded, but that of course may contacts that you want to leave on the iPhone. You should use some sort of external contact manager eventually.
*Apple is not entirely clear about local contacts and backups, and there is some disagreement among users here. The article below states:
Your contacts are part of the backup to preserve recent calls and favorites lists. To avoid any potential contact data loss, back up your contacts to a supported personal information manager (PIM) or another cloud-based service (such as Gmail or Microsoft Exchange).
Contacts sync and backup on iPhone -
I am running windows xp and firefox 2.0 and when ever I go to upgrade to any version of firefox my book marks will quadruple and I have no idea as to why I have even tried to move my saved book marks onto a disk and it still will do the same thing. Any help with this would be greatly appreciated. cw
I went into the profile folder and found these files but it will not allow you to delete them so now what do you do. I am wondering if I go in and search the hard drive and delete everything that has to do with bookmarks then try to down load the up grade and then load my book marks from a disk would that work? cw
-
Major considerations for the Upgrade from R/3 4.6c to ECC on HR Part.
Hi Experts,
We are doing an upgrade from SAP R/3 4.6c to ECC 6.0
What would be the impact on Personnel Administration and Organizational Management submodules of HR? and the major worries abt ESS and MSS. Currently my client is using ESS and MSS in portal that can retrieve the data from the Backend 4.6c system. while doing upgrade is there any prerequisites i need to met or is there any post upgrade activities for HR or is there Any dependencies?
Because there is a complete architecutre difference for ESS and MSS in both versions, so how can i manage the things without data inconsistencies?
Responses would be heighly appreciated.
Regards,
SriniHi Experts,
We are doing an upgrade from SAP R/3 4.6c to ECC 6.0
What would be the impact on Personnel Administration and Organizational Management submodules of HR? and the major worries abt ESS and MSS. Currently my client is using ESS and MSS in portal that can retrieve the data from the Backend 4.6c system. while doing upgrade is there any prerequisites i need to met or is there any post upgrade activities for HR or is there Any dependencies?
Because there is a complete architecutre difference for ESS and MSS in both versions, so how can i manage the things without data inconsistencies?
Responses would be heighly appreciated.
Regards,
Srini -
How to migrate the Objects from 3.1c to BI7
Hi,
We are in Functional Upgradation.
How to Migrate the Objects( Infocubes,DSO,Datasources,Rules...etc...) from 3.1C to BI 7.0
Please help me to doing this....
regards,
anilBW Upgrade tasks (BW 3.1C to BI 7.0)
Prepare Phase:
Task How-To Who
Review BI 7.0 feature lists Review BI 7.0 feature lists for possible inclusion in developments. Basis/BW
Obtain the BI 7.0 upgrade guide Download the upgrade guide from http://service.sap.com/inst-guides -> SAP NetWeaver -> Upgrade
Basis/BW
Review all upgrade SAP notes In addition to the upgrade guide, check, download, and review all SAP notes for your upgrade
BI 7.0 Upgrade notes
SAP Web Application Server 6.40 upgrade notes
OS and DB specific upgrade notes
SAP BW Add-on upgrade notes
(e.g. SAP SEM, ST-PI, etc)
Plug-In upgrade SAP notes
Other notes identified in above notes and/or upgrade guides.
Basis/BW
Check DB and OS requirements for the target SAP BW release Check DB version/patch level and OS version/patch level required for upgrade
First check the most current information from the SAP BW homepage http://Service.sap.com/BW -> <SAP BW release> -> Availability
Additionally, the u201CPlatformsu201D link will take you to the main DB/OS page for BI 7.0 and SAP Web AS 6.40.
Note: In some cases there are differing requirements for SAP BW 3.0B/SAP BW 3.1 Content and BI 7.0
Basis
Check SAP BW Add-on upgrade requirements Do you have SAP BW add-ons installed that require additional handling (e.g. SAP SEM, Enterprise Portal Plug-in, etc)?
SAP SEM (SAP BW based components) requires SAP SEM 4.0 which is part of the mySAP ERP 2004 suite.
WP-PI release must be at 6.00 before the upgrade begins. As mentioned before this add-on is merged with PI_Basis after the upgrade.
Basis
Check SAP BW upgrade requirements Minimum Support Package and kernel levels for upgrade
SAP BW Frontend requirements for new SAPGUI, SAP BW BEx Frontend and SAP BW Web applications.
Source system Plug-In requirements Basis
Check compatibility requirements with 3rd party software 3rd Party Reporting tools (example: Crystal)
ETL Tools (example: Ascential, DataStage, etc)
Scheduling tools (example. Control-M, Maestro, etc)
Monitoring tools (example: HP OpenView, Patrol, etc)
Other OS or DB related tools Basis
Check new component requirements for BI 7.0 If SAP BW web reports were developed in SAP BW 2.x, a windows version of IGS 6.40 (Internet Graphics Service) is required for conversion and future rendering of web graphics (i.e. Charts and GIS Maps).
The IGS chart migration will also be required after the SAP BW web report conversion.
If you used or activated any SAP BW Web Applications in SAP BW 3.x, or if you have used charts in SAP BW 2.x web reports, you will need a windows version of IGS 6.40 (Internet Graphics Service) to execute the IGS chart migration after the upgrade.
If ESRI GIS software is in use, a different version of ESRI software maybe required for BI 7.0. (ArcView 8.2?).
If you plan to use Information Broadcasting, please review the requirement for additional infrastructure components such as EP, KMC, Workbook pre-calculation service, and Web AS connectivity to your mail servers.
Detailed information is available in the SAP NetWeaver u201904 master planning guide (http://service.sap.com/instguides -> SAP NetWeaver).
Basis
Test and distribute new SAP BW Frontend
Install and test the new BI 7.0 Frontend (including the new version of SAPGUI for Windows if applicable).
A detailed FAQ on the new BI 7.0 Frontend is available on the SAP service marketplace alias BWFAQ (http://service.sap.com/BWFAQ).
After successful testing, the new SAPGUI for Windows and SAP BW Frontend can be distributed to the BW teams and end users.
Basis
Alpha Conversion:
Ensure that your InfoObject data is consistent from a u201Cconversionu201D perspective (Alpha Converter tool) Check that you have executed the Alpha Converter tool to check the consistency of your InfoObject definitions and data for InfoObjects that utilize the ALPHA, NUMCV and GJAHR conversion exits.
Note: The Alpha conversion is not part of the SAP BW upgrade itself, but the upgrade simply checks to ensure you have successfully executed the check tool.
Transaction RSMDCNVEXIT
Check the system status:
u201CAll Characteristics Have Correct Internal Valuesu201D: The Alpha converter has been successful executed. The upgrade preparation can continue.
u201CNo Check yet/Inconsistent Internal Vales existu201D:
The Alpha converter check has not been executed.
u201CCharacteristics have Inconsistent Internal Valuesu201D:
The Alpha converter tool check has been executed and data problems have been detected. The InfoObject and data must be processed before the upgrade can be started.
BW
Upgrade SAP Note updates Check for newer versions of your SAP notes for the Upgrade.
Tip: The SAP service marketplace offers an option to subscribe to OSS notes so you can be notified of changes when you log on.
Basis/BW
Confirm SAP BW support package, kernel and DB/OS configuration Analyze current Support Package and DB/OS/Kernel configurations in your SAP BW landscape in relation to the SAP BW 3.x upgrade requirements.
Apply necessary support packages, kernel patches, and DB and OS patches to meet upgrade requirements
Basis
Alignment of SAP BW objects within your SAP BW system landscape Check and, where required, re-align SAP BW Objects and developments in your SAP BW system landscape (Development, Quality Assurance and Production).
SAP BW Object differences can impact the quality of testing in the Development and Test environment and can lead to change management issues.
This check is to minimize risk and ensure productive objects are being tested prior to the Production upgrade.
Where alignment issues exist and realignment is not possible, alternative testing plans should be devised.
Basis/BW
Confirm all developments are deployed. Ensure that all SAP BW developments are deployed or they are to be re-developed/tested after the upgrade.
In the DEV system, all SAP BW development transports should be released (i.e. transport created and released) and imported to all downstream systems (i.e. QAS and PRD systems).
For SAP BW developments not already collected in the transport collector, a decision must be made:
Deploy the developments or wait until the upgrade has completed to deploy.
o Development to be deployed should be collected, released, and imported into the QAS and PRD systems.
o Developments that should be deployed after the upgrade should be re-tested/re-developed after the upgrade.
In the QAS or PRD systems, ensure that all SAP BW development transports have been imported prior to the upgrade.
BW
Implement BI 7.0 Business Explorer Frontend Install, evaluate, test and distribute the new BI 7.0 Business Explorer Frontend.
Basis/BW
Pre-upgrade Process:
Download required BI 7.0 support package Stack for inclusion in the upgrade Determine the equivalent support package level of the source SAP BW release and the target SAP BW release.
There is a minimum requirement that you upgrade to at least the equivalent support package level on the target SAP BW release so that you do not lose functionality, corrections, and data.
It is recommended to upgrade to the latest version of all support packages during the upgrade via the upgradeu2019s support package binding functionality.
BI 7.0 Support Packages are delivered via SAP NetWeaver u201904 Support Package stacks (SP-Stacks). It is not recommended to partially apply some of the SP-Stacksu2019 individual support packages. You should apply all of the SP-Stacks support packages at once.
For more information on the SP-Stacks and SAP NetWeaver SP-Stacks, please see the SAP service marketplace alias SP-Stacks (http://service.sap.com/sp-stacks)
You should also review, download, and bind in support packages for all add-on components that are installed on SAP BW and will be upgraded during the SAP BW upgrade (e.g. SEM-BW, ST-PI, etc)
Basis
Apply latest Support Package tool patch Apply latest SPAM patch before executing PREPARE Basis
Validate the SAP BW (ABAP) Data Dictionary and the Database Data Dictionary for consistency Check Database consistency
Transaction DB02:
o Execute ABAP SAP_UPDATE_DBDIFF and re-execute DB02 check. This gives a truer view of the SAP BW objects in DB02.
o Check missing database objects (indices, tables, etc)
o Missing indices may identify erred data loads or process problems
Tip: Missing indices on InfoCubes can be restored by RSRV or ABAP SAP_INFOCUBE_INDEXES_REPAIR
Note: check for running data loads before executing a repair!
o Check DDIC/DB consistency
Verify database objects and consistency
(e.g. SAPDBA check for offline data files)
BW
Remove unnecessary SAP BW temporary database objects Delete all SAP BW temporary database objects:
Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
This reduces the numbers of database objects that need to be copied during the upgrade.
Note: take care not to delete objects that are in use as this will cause queries, compressions, etc to terminate.
BW
Validate your SAP BW Objects for correctness prior to your upgrade Using the SAP BW Analysis Tool (transaction RSRV), perform extensive tests on all important SAP BW Objects to ensure their correctness prior to the upgrade.
Note: this test should be repeatable so you can re-validate after the upgrade!
Ensure that any inconsistencies are identified and corrected
RSRV has a number of extensive tests and if all checks are executed will consume a large amount of time. Multiple tests can be performed in parallel.
Tip: Some corrections in development can be deployed to other systems via transport in advance of the next upgrade.
BW
Ensure DB Statistics are up to date prior to the upgrade Check DB statistics for all tables.
Tables without statistics, especially system tables, can seriously impact upgrade runtimes.
Check DB statistics for missing Indexes for InfoCubes and Aggregates
o User transaction RSRV to check BW
Check SAP BW Support Package status Check the status of all support packages (via transaction SPAM)
Ensure the Support Package queue is empty
Confirm all applied Support Packages Basis
Check all u2018Repairsu2019 Check for unreleased repair transports
Release all unreleased transports
In your QAS and PRD system, check if all repair transports have been imported (i.e. systems are aligned)
Import missing repair transports into down stream systems. This will avoid differing message and/or errors during the upgrade.
BW
Check InfoObject status Check for revised (modified) InfoObjects that have not been activated.
All InfoObjects should be active or saved (not activate):
o Check all inactive InfoObjects:
Transaction RSD1 (Edit InfoObjects),
click on u201CAll InfoObjectsu201D radio button and click the u201CDisplayu201D button.
Modified InfoObjects are denoted by yellow triangles!
o Determine if revision should be activated or removed.
'Reorgu2019 or u2018Repairu2019 all InfoObjects
This checks and repairs any discrepancies in the InfoObject definition and structures. It is common to have obsolete DDIC and table entries for InfoObjects after multiple upgrades and definition changes. These obsolete entries normally do not effect normal SAP BW operations.
Transaction RSD1 (Edit InfoObjects), Select u201CExecute Repairu201D or u201CExecute Reorgu201D Use expert mode for selective executions.
BW
All ODS data loads must be activated. Activate all inactivated ODS Object requests.
All ODS u2018Mu2019 tables must be emptied prior to the upgrade as a new activate process is implemented
o Inactivated ODS request can be located via the Admin workbench -> u2018Monitoringu201D button -> u2018ODS Status Overviewu201D
BW
All Transfer and Update rules should be active Check for inactive Update and Transfer Rules
o All update rules and transfer rules should be active or deleted.
o Look into the table RSUPDINFO for update rules and search for the version "not equal" to "A". Likewise use the table RSTS for Transfer rules/structure. BW
All InfoCubes should be active Check for inactive InfoCubes and Aggregates (Aggregates are InfoCubes too!)
o All InfoCubes should be activated or deleted.
o Execute ABAP RSUPGRCHECK to locate any inactive InfoCubes. See SAP note 449160.
BW
All Web Report objects should be consistent prior the upgrade. Check the consistency of your SAP BW web objects (web reports, web templates, URLs, roles, etc). All objects should be consistent prior to web object conversion after the upgrade. It is recommended to ensure consistency before the upgrade.
o For Original release SAP BW 3.x:
A SAP BW web reporting objects check can be executed via a new check in RSRV. This is provided via a SAP BW support package.
Please see SAP note 484519 for details.
BW
Backup your system before starting PREPARE Before execution PREPARE, perform a full database backup (including File system). Ensure you can recover to the point in time before PREPARE was executed.
Database admin
Address any instructions/errors generated by PREPARE Address any issues listed in log files Checks. Log generated by PREPARE.
o Repeat PREPARE until all checks are successful. Basis
Complete any Logistic V3 data extractions and suspend V3 collection processes Extract and empty Logistics V3 extractor queues on SAP R/3 source systems.
o The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss. V3 collector jobs should be suspended for the duration of the upgrade.
They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
Note: If you perform any data loads after executing PREPARE, re-check the status of all delta queues in SAP BW and the source systems(s).
BW
Complete any data mart data extractions and suspend any data mart extractors Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
o The SAP BW Service SAPI, which is used for internal and u2018BW to BWu2019 data mart extraction, is upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the upgrade to avoid any possibility of data loss.
Note: If you perform any data loads after executing PREPARE, re-check the status of all delta queues in SAP BW and the source systems(s).
BW
Check that your customer defined data class definitions conform to SAP standards Check all customer created Data classes used by SAP BW Objects (i.e. InfoCubes, ODS Objects, Aggregates, InfoObjects, and PSAs) to ensure they conform to SAP standards.
o Check your data class definitions as detailed in SAP Notes 46272 and 500252.
o Incorrect data classes could create activation errors during the upgrade.
BW
Remove unnecessary SAP BW temporary database objects Delete all SAP BW temporary database objects:
Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
For more information see SAP note 308533 (2.x) and 449891 (3.x).
This reduces the numbers of database objects that need to be copied during the upgrade.
Note: take care not to delete objects that are in use as this will cause queries, compressions, etc to terminate.
Basis/BW
Backups! Before executing the upgrade, ensure that you have a backup strategy in place so you can return to the point where loading was completed and the upgrade started.
Ensuring you can return to a consistent point in time (without having to handle rollback or repeats of data loads) is key to having a successful fallback plan.
Database Admin
Before Execution:
All SAP BW administration tasks should have ceased Cease all SAP BW administration tasks such as Object maintenance, query/web template maintenance, data loads, transports, etc at the beginning of the upgrade.
The Administrators Workbench and the Data Dictionary are locked in the early phases of the upgrade.
Reminder: Users can execute queries until the time that the upgrade determines that the SAP BW System should be closed*
- timing depends on the type of upgrade selected
Basis/Admin
Remove unnecessary SAP BW temporary database objects Repeat the deletion of all SAP BW temporary database objects after you have stopped using the SAP BW Admin workbench*
Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
For more information see SAP note 308533 (2.x) and 449891 (3.x).
- timing depends on the type of upgrade selected
BW
Check system parameters Check OS, DB, and Instance profile parameters.
Check System Instance parameters for new BI 7.0 specific parameters. See SAP note 192658 for details
Check for any DB specific parameters for BI 7.0
Check for any new OS parameters Basis
Check Database archiving mode Turn database archive log mode back on if it was disabled during the upgrade!
Database Admin
After Execution:
Check the systemu2019s installation consistency Execute Transaction SICK to check installation consistency
BW
Check the system logs Perform a technical systems check.
Example: Check system and all dispatcher logs (inc. ICM logs)
Basis
Apply latest executable binaries Apply the latest 6.40 Basis Kernel for all executables
Tip: use the SAP NetWeaver u201904 SP-Stack selection tool to find all binaries. (http://service.sap.com/swdc)
Basis
Review BI 7.0 Support Packages for follow-up actions. Review SAP Notes for all SAP BW Support packages applied during (bound into the upgrade) and applied after the upgrade:
o Search for Note with the keyword u201CBWu201D, u201CSAPBWNEWSu201D, and u201C<BW release>u201D
o Follow any required instructions identified in the SAP Notes
Basis
Apply latest patches Apply the latest SPAM patch
Apply any required support packages that were not bound into the upgrade.
Basis
Apply additional BI 7.0 Support Packages
(if required) SAP recommends that customer remain current on SAP Support Packages.
Review SAP Notes for all SAP BW Support packages applied in previous task.
o Search for Notes with the keyword u201CBWu201D, u201CSAPBWNEWSu201D, and u201C<BW release>u201D
o Follow any required instructions identified in the SAP Notes
Basis
Resolve any modified SAP delivered Role issues If SAP delivered Roles were modified, then these modifications may incorrectly appear in the upgrade modification adjustment tool (SPAU).
Review and implement SAP note 569128 as required Basis
Configuring Information Broadcasting EP/KMC Connections
If you plan to use the EP integration functionality of Information broadcasting (Broadcast to the EPu2019s PCD, Broadcast to KMC, or Broadcast to Collaboration Rooms):
Ensure the SAP EP is at the same SP-Stack level as your SAP BW system.
Follow the online help documentation to configure and connect the SAP BW system and the SAP EP system. (http://help.sap.com).
For broadcasting to KMC, ensure that KM has the u2018BEx Portfoliou2019 content available.
Basis
Re-check SAP BW Object and consistency Execute RSRV to check SAP BW Object consistency
Repeat tests that we executed prior to the upgrade.
Validate results BW
Check InfoCube views for consistency Check consistency of InfoCube fact table views
It is possible that fact table view /BIC/V<InfoCube>F is missing if a number of SAP BW upgrades have been performed before. See SAP Note 525988 for instructions for the check and repair program.
BW
Perform SAP BW Plug-in (SAPI) upgrade follow-up tasks If required, Re-activate the SAP BW u201CMyselfu201D source system in SAP BW.
The SAP BW internal plug-in (SAPI), which is used for internal data mart extraction and u2018BW to BWu2019 communication, is upgraded during the SAP BW upgrade. The source system is de-activated to prevent extractions and loading during the upgrade.
It may be required to replicate export DataSources and reactivate transfer structures/rules for internal data loads (i.e. ODS Object to InfoCube objects).
o Tip: It is advised to do this step for all export DataSources to avoid possible errors during execution of InfoPackages
Check that all other Source Systems are active.
o Activate as required. Basis/BW
Check SAP BW Personalization is implemented (SAP BW 2.X upgrades will have performed this in the previous task).
Validate that personalization has been activated in your SAP BW system.
Note: It has been observed that in some cases, BEx Personalization has to be re-activated after an upgrade from SAP BW 3.x to BI 7.0. It is advised to check the status of personalization after the upgrade.
Enter the IMG (transaction SPRO), select SAP Business Warehouse -> Reporting relevant settings -> General Reporting Settings -> Activate Personalization in BEx
Check the status of the Personalization settings. All entries should be active u2013 highlighted by an unchecked check box.
To activate highlighted Personalization, click Execute. BW
For SAP BW 2.0B/2.1C -> BI 7.0 Upgrades:
Convert ODS secondary indexes to new standard For SAP BW 2.0B/2.1C -> BI 7.0 Upgrades:
Convert any customer created ODS Object secondary indexes to the new ODS Object index maintenance process.
Re-create all indexes in the ODS Object definition screen in transaction RSA1.
ODS indexes must conform to the new naming convention
BW
Converting IGS chart settings
Convert you existing IGS chart settings (converts IGS chart settings from BLOB to new XML storage format)
Ensure you have the latest SAP Web AS 6.40 IGS (stand alone windows version) installed and working
o Test via transaction RSRT
Execute the conversion process as directed the BI 7.0 upgrade guide.
Note: This step is required for all BI 7.0 upgrades Basis
Backup your SAP BW system Perform a full database backup (including the File system)
Remember to adjust your backup scripts to include new components such as the J2EE engine, pre-calculation service, etc.
Database Admin -
Error Upgrading from the Evaluation Version of Microsoft Lync Server 2013
Hi,
I try to upgrade from Evaluation to full Version using:
http://technet.microsoft.com/en-us/library/gg521005.aspx
but after i run: msiexec.exe /fvomus server.msi EVALTOFULL=1 /qb
i get a popup:
"Another version of this product is already installed. installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel."
Get-CsServerVersion :-> Microsoft Lync Server 2013 (5.0.8308.0): Evaluation license key installed.
Any ideea?Hi Iulius
As your upgrading the Licence on the Lync 2013 FE it shouldn't care about the Lync 2010 Environment. As your moving from Eval to Full Licence on 2013. I have come across the below url that might help.
http://pei.com/2013/03/how-to-change-lync-license-from-evaluation-to-licensed/
http://jackstromberg.com/2013/02/how-to-activate-lync-evaluation-to-licensed-version/
I would personally go with from Lync Management Shell with Elevated Permission
cd /
cd /d: (Other what other drive letter)
cd /Setup\Amd64\Setup
msiexec.exe /fvomus Server.msi EVALTOFULL=1 /qb
But that's just me Id rather run the command from the directory than pointing to it.
Regards
Andrew Price -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.
Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg -
It´s possible to upgrade from the latest mavericks beta to the final version?
Hi all. I´m thinking in becoming a developper because I want to install mavericks beta on my macbook pro (I can´t wait for the battery and ram upgrades). But i have a question before that. It´s posible to upgrade from the latest mavericks beta to the final version? , or Ihave to restore to mavericks final version and then use a time machine Backup?
Thanks in advance.
Sorry for englishNo one who knows can say, because Mavericks is not released yet.
To get a Free copy that can be updated, you need to have a paid developer membership, at a minimum cost of at least US$100/ annually. (This may also include one Developer Tech Support incident and other benefits.)
Apple has lowered the cost of new versions of Mac OS X to about US$20. If Mavericks is released at about that price, buying a legitimate copy instead of depending on a quirky developer version that cannot be updated should not be a difficult decision. -
Regarding reading the data from the files without using Stremas
hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.RamakrishnaSimply put, you can't.
By why do you need to? -
I now use Google Chrome and recently the "Upgrade to the new Firefox has been showing up on my Yahoo email screen. I'd like to get rid of it as I don't expect I'll ever switch back to Firefox (though I used it for years and really did like it) as I'm now comfortable with Chrome.
sighs another person who got wrong information...
Mozilla did not get rid Brendan Eich, a man who co-founded the Mozilla project, the Mozilla Foundation and the Mozilla Corporation. He made the decision himself to leave as his way of trying to help Mozilla.
Mozilla lost users due to the misinterpretations of what really happened as many had hatred towards Mozilla for making Brendan as CEO and hate from those who did support Brendan as CEO and thought Mozilla caved in to the pressure of having him step down and thought they fired him.
All because of donation that he made back in 2008 and was public record due to a California law. Mozilla knew about this for years and he was accepted and supported by lgbt employees even. Yet many outsiders were sadly not supportive of him being promoted from CTO to CEO and those hateful people were even worse towards some lgbt employees who received death threats even for supporting Brendan as CEO. -
I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac????? Help
Return it.
The requirements are on the box and on the website:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download fromwww.itunes.com/download)
iTunes Store account
Internet access
http://www.apple.com/iphone/specs.html -
Where can i find the upgrade from logic pro 7.1.1 to 7.2?
Hello there.
Is the upgrade from logic pro 7.1.1 to 7.2 still available out there somewhere? I know I'm a bit behind the rest of the world but financially I'm taking the 'do the best with what you can' route!
Never used logic before, moving up from garageband and cubase sx cos everyone says it's a better program.
Many thanks,
GDxHi
If I remember correctly, the 7.2 update was a "Paid for" update, with a new dvd.... so you are most likely out of luck.
The good news is that Logic Pro is pretty cheap on the Appstore
CCT -
I have a software license certificate for the upgrade from CS5.5 to CS6, but I have lost the upgrade file due to a disk crash in my computer.
where can I get the upgrade file from ?
thanks,
OferDownloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
HT4972 This does not explain how to do the upgrade from IOS4 to 5. How do I do that?
This does not explain how to do the upgrade from IOS4 to 5. How do I do that?
I would be ideal to have a step by step approach I can follow.To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 2G can only go to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models
Maybe you are looking for
-
GL Account Balance Query Issue
Hi, I'm trying to extract GL Balances in the following format Company Segment(Segment2) || Account Number(Segment1) || Cost Center Segment4 || Account Descr || Actual Flag || Account Type || Activity || Activity in Period || Currency || Perio
-
Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please
-
Manual creation of planned order(PE) ??
hi , whenever i creating planned order manually for REm assembly(md11), system automatically taken PE order type. where configure setting is there for this automatic action????
-
Error message when Sync from itunes.
I have 2 TVs, both have the latest update, iTunes 8, using AE for WIFI and both streaming. Both units have been working great for over a year now. One of the unit is now freezing up after about 1hr of use... I get this error message from iTunes when
-
How to get my apps to show up on the desktop
How do I get my downloaded app to show up on the desktop on my iPad 4? Thanks in advance