Regarding Timeline Index

How do i update the timeline index in fcpx?? I kind of deleted a keyword collection and added a new one in the Event library, but it is not showing in the timeline index...Could someone tell me how to do that???

The Time Line Index doesn't update when you change a keyworded clip (or clips) in the event.
You would need to replace the clips in the Timeline whose keywords were changed in order to see that reflected in the TL Index.
Russ

Similar Messages

Regarding sy-index and sy-tabix

Hi,
What is the major difference between sy-index and sy-tabix ,
can you give me one good example with code..
Regards,
Reddy.

Hi,
SY-TABIX - Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY_INDEX - In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
sy-tabix is the tab index - the index of the record in the internal table you are accessing,
sy-index is the loop counter.
If you use a condition in LOOP the sy-index will go from 1 to n, but sy-tabix will refer to the line in the internal table.
Hope this helps u.
Thanks,
Ruthra

Regarding Renaming INDEX Partitions

Hi All,
I have the following syntax for renaming table partitions/subpartitions :
ALTER TABLE SMTP_MSG_TRAFFIC_FCT RENAME PARTITION FOR (20100310) TO BASE_FACT_20100310;
ALTER TABLE SMTP_MSG_TRAFFIC_FCT RENAME SUBPARTITION FOR (20100310,19) TO BASE_FACT_20100310_MAILBOX;
I want to do the same thing for renaming the index partitions/subpartitions :
ALTER INDEX SMTP_MSG_TF_FX02_ARR_TM_DIM_ID RENAME PARTITION FOR (20100310) TO BASE_FACT_20100310;
ALTER TABLE SMTP_MSG_TF_FX02_ARR_TM_DIM_ID RENAME SUBPARTITION FOR (20100310,19) TO BASE_FACT_20100310_MAILBOX;
But I get the following error:
SQL> ALTER INDEX SMTP_MSG_TF_FX02_ARR_TM_DIM_ID RENAME PARTITION FOR (20100310) TO BASE_FACT_20100310;
ALTER INDEX SMTP_MSG_TF_FX02_ARR_TM_DIM_ID RENAME PARTITION FOR (20100310) TO BASE_FACT_20100310
ERROR at line 1:
ORA-14006: invalid partition name
Is it possible to rename the partition in this way? Or can I set any parameter that will ensure that when the base table partition name changes, it will also change the index partition name?
Thanks & Regards,
Aniket

yes its possible:
SQL>ALTER INDEX index_name RENAME PARTITION index_partiton_name TO new_index_partition;
You are getting error because :
a partition name is expected but not present as you typed,
enter an appropriate partition name, will solve the problem.
Edited by: adnanKaysar on Mar 18, 2010 12:32 PM

Regarding "Delete Index" process in the process chain.

Hi Gurus
In the process chain, I have Delete Index -> Load Info pacakge -> Create Index process in the above order.
I am loading few records, so no need to delete indexes everytime. Can i remove the "Delete Index" process from the Chain without deleting the Create Index process. Or do I have to delete both.
Could you please clarify my doubt if possible in detail.
Thanks,
Regards,
aarthi

With the numbers you provided, you probably don't need to have the steps. With Oracle (not sure about all the other DB flavors) there are some other considerations:
Not having the indexes when loading the data can improve the load time since the bitmap indexes are not very efficient with respect to inserts/updates. The more dimensions you have, the more indexes there will be and the more noticable the impact of having the indexes present when loading.
The drop index process only drops the F fact table indexes. If you compress your cubes regularly so that you don't have many uncompressed requests, the index rebuild time will remain small, but if you have many uncompressed requests in your cube, the index rebuild time can begin to exceed whatever time you might save on the load with indexes deleted.
With bitmap indexes present, you can also occasionally receive a ORA-0600 deadlock error during the load process, and that can be prevented by dropping the indexes before loading or chose the load option packet by packet so that two packets are not trying to update the same index block at the same time.
Another concern in shops where reporting on the cube might occur during the load process - if you drop indexes prior to a load, any one trying to run a query on teh cube could have poor query performance since all the indexes will be missing onthe F fact table, this agina becomes more apparent the more data you have in the uncompressed fact table.
So it really comes down to your environment, but certainly drop the indexes any time you have large loads.

Regarding Secondary Index in a Table

hi
if i create a secondary index in a table is it obligatory or optional to have first field as MANDT (Client field) if the table is client dependent & how many secondary indexes(MAXIMUM) can be created for a table.
Regards

Hi,
Check the below Link
How to transport a secondary index on P master data table?
Hope this helps you.
Regards,
Anki Reddy

Regarding LOB index

Hi,
I am having a SQL loader mapping where in I am loading data from a CSV file to Oracle target table.
My target table is having a CLOB column. Now, due to this a LOB index has also been created for this column.
My CSV is having 1 million records and when I execute the mapping it gets hang and doesnot load anything.
I think that due to that LOB index the execution is taking so long. Is there any way that I can disable this index during run-time. I tried but it gave me error: ORA-22864: cannot ALTER or DROP LOB indexes.
Can anyone of you suggest any alternate to this.
Thanks!!!!

Hey Fren,
We have Secondary index to shorten the search time and thus to increase the proficiency in selecting the accurate records from numerous fields available for the option...
That means, we can say that Secondary Index can act as an Extension to the Primary Key fields available to Shorten the Search time.....
But if you use 'OR' condition and give a SELECT Query in your report it will act as the reverse effect of Secondary index......
Instead you can create the Secondary Index including the key fields with some extension to the same...
Means For example,
Table 1:
Field1 [x] CHAR 10
Field2 [x] CHAR 10
Field3 [ ] NUMC 10
Field4 [ ] CHAR 10
Field5 [ ] CHAR 10
Field6 [ ] NUMC 10
Field7 [ ] CHAR 10
Field8 [ ] CHAR 10
Field9 [ ] NUMC 10
Field10 [ ] CHAR 10
Field11 [ ] CHAR 10
Field12 [ ] NUMC 10
Field13 [ ] CHAR 10
Field14 [ ] CHAR 10
Field15 [ ] NUMC 10
Field16 [ ] CHAR 10
Field17 [ ] CHAR 10
Field18 [ ] NUMC 10
Field19 [ ] CHAR 10
Field20 [ ] CHAR 10
Field21 [ ] NUMC 10
Field22 [ ] CHAR 10
Field23 [ ] CHAR 10
Field24 [ ] NUMC 10
So you can have Field 3 Field4 Field5 Field6 as your secondary index.....
Thats it,
Thank you,
Inspire If Needful,
Warm Regards,
Abhi

Regarding deleting index

Hi Friends,
If I delete the whole content of an Infocube and then do the reload,is it require to delete the index seperately.
If I don't delete the index how is it going to impact the load?
Regards,
Debjani...

It doesn't mean that Indexes will delete permanently .. Structure will remain same!
When you delete data from cube it also deletes the generated indexes which are existed .. there is no point of having indexes on deleted records .. it's logical
even it doesn't hold any data it allows you to create index and generate stats(ex. create a dummy cube and try to generate)
For the moment I don't have any document for it.. I will let know
For your 2nd ques.
Only for huge loads droping index will be usefull which will improve the loading performance!
For daily delta load with less volume of data you need not to drop Indexes .. if you do so it will take lot of time to rebuild the indexes(on whole data)

Regarding Condition Index

Hi All,
With regards to condition index I have made the required tick in the condition type now when I am going into the master data with regards to creating condition records selecting the condition index tab by giving the input as the condition type, the system says that there are no records found, eventhough I have created the sales order in the system, the access sequence consists of line item and sales order please advise if any other configuration needs to be done for condition index and how do I check if the configuration is complete.
Kind Regards
Atul

Hi Condition indes only Specifies whether the system updates one or more condition indices when maintaining condition records. It depends whether you had created the combination of condition recored to determin if you can find the existing one, please be sure you had created the condition record via vk11.

Regarding sy-index

Hi all,
I am trying to get loop count by using sy-index.
But I am not able get exact expected out put.
I am gettig all zeros instead of loop number.
I am sending my code here.
DATA: lv_diff(10) TYPE c,
        lv_erdat1 LIKE sy-datum,
        lv_erdat2 LIKE sy-datum,
        i(15) TYPE c VALUE '1'.
SORT t_ordno BY aufnr.
LOOP AT t_ordno INTO st_ordno.
    READ TABLE t_ordno INTO st_ordno INDEX i.
    lv_erdat1 = st_ordno-erdat.
    i = i + 1.
    READ TABLE t_ordno INTO st_ordno INDEX i.
    lv_erdat2 = st_ordno-erdat.
    i = i + 1.
    CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
         EXPORTING
              i_datum_bis = lv_erdat2
              i_datum_von = lv_erdat1
         IMPORTING
              e_tage      = lv_diff.
    WRITE:/ lv_diff,
          50 <u><b>sy-index.</b></u>
    CLEAR: lv_erdat1,lv_erdat2,lv_diff.

use this code
DATA: lv_diff(10) TYPE c      ,
      lv_erdat1 LIKE sy-datum ,
      lv_erdat2 LIKE sy-datum ,
      i(15) TYPE c VALUE '1' ,
      l_tabix type syst-tabix .
SORT t_ordno BY aufnr.
LOOP AT t_ordno INTO st_ordno.
l_tabix = sy-tabix .
READ TABLE t_ordno INTO st_ordno INDEX i.
lv_erdat1 = st_ordno-erdat.
i = i + 1.
READ TABLE t_ordno INTO st_ordno INDEX i.
lv_erdat2 = st_ordno-erdat.
i = i + 1.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
       EXPORTING
            i_datum_bis = lv_erdat2
            i_datum_von = lv_erdat1
       IMPORTING
            e_tage      = lv_diff.
WRITE:/ lv_diff,
       50 l_tabix.
CLEAR: lv_erdat1,lv_erdat2,lv_diff.

Regarding secondary index

how and when we create secondary indexes and what are the advantages and disadvantages of secondary indexes?

Hi
Index: Technical key of a database table.
Primary index: The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
Secondary index: Additional indexes could be created considering the most frequently accessed dimensions of the table.
Structure of an Index
An index can be used to speed up the selection of data records from a table.
An index can be considered to be a copy of a database table reduced to certain fields. The data is stored in sorted form in this copy. This sorting permits fast access to the records of the table (for example using a binary search). Not all of the fields of the table are contained in the index. The index also contains a pointer from the index entry to the corresponding table entry to permit all the field contents to be read.
When creating indexes, please note that:
An index can only be used up to the last specified field in the selection! The fields which are specified in the WHERE clause for a large number of selections should be in the first position.
Only those fields whose values significantly restrict the amount of data are meaningful in an index.
When you change a data record of a table, you must adjust the index sorting. Tables whose contents are frequently changed therefore should not have too many indexes.
Make sure that the indexes on a table are as disjunctive as possible.
(That is they should contain as few fields in common as possible. If two indexes on a table have a large number of common fields, this could make it more difficult for the optimizer to choose the most selective index.)
Accessing tables using Indexes
The database optimizer decides which index on the table should be used by the database to access data records.
You must distinguish between the primary index and secondary indexes of a table. The primary index contains the key fields of the table. The primary index is automatically created in the database when the table is activated. If a large table is frequently accessed such that it is not possible to apply primary index sorting, you should create secondary indexes for the table.
The indexes on a table have a three-character index ID. '0' is reserved for the primary index. Customers can create their own indexes on SAP tables; their IDs must begin with Y or Z.
If the index fields have key function, i.e. they already uniquely identify each record of the table, an index can be called a unique index. This ensures that there are no duplicate index fields in the database.
When you define a secondary index in the ABAP Dictionary, you can specify whether it should be created on the database when it is activated. Some indexes only result in a gain in performance for certain database systems. You can therefore specify a list of database systems when you define an index. The index is then only created on the specified database systems when activated
Regards

Conforming and Indexing Errors, Media Pending, Audio won't play in timeline

I'm working on a desktop PC which is running Windows 7 Professional 64-bit and Adobe Premiere Pro (version CS5.5). It's currently utilizing a second gen. 3.4Ghz i7 2600 processor, 16GB of 1600Mhz RAM, 64GB solid-state drive and a ASUS P8Z68-V Intel Z68 Motherboard with onboard audio (Realtek ALC892 chipset) and onboard video. My problem is this:
The conforming and indexing of all of my imported media never seems to finish regardless of how many times I reopen the project file and wait for it. On the lower right-hand portion of the screen, next to the conforming/indexing progress bar, is a little red "X". When clicked, it pops up with a list of errors that read: "An unexpected error occurred while performing a conform action on the following file...". As a result, my audio channels have no waveform and during playback there are no audible tones or levels. On some video clips there's just text that reads "Media Pending". This only appears to happen with project files that I saved on external hard drives, and I suspect it has something to do with the Media Cache Files folder and how Premiere Pro locates these conform/index files. I've also encountered this problem in CS3 and CS4.
I have a few questions:
1) How do I avoid error messages in regards to indexing and conforming
2) How do you know when indexing/conforming has completed itself? (there doesn't seem to be a progress log or a list of commands/executions)
3) Indexing and conforming appears to be an automatic process, but is there a way to do it manually?
4) What's the best way to setup your media cache files when you click EDIT > PREFERENCES > MEDIA?
5) If I have approximately 1 hour of footage, what's an average wait time for conforming/indexing? What about 5 hours of footage? 10?
6) Adobe recommends not editing until the conforming and indexing has completed itself-- how important is this?
7) Sometimes it appears as though the conforming and indexing has finished, but then I still have problems with playback. Do I have to reopen the project for it to continue with the conforming/indexing progress? I've already determined that the video file I'm working with is intact and free of any corruption.
I'm fine with having to wait for a project to conform and index, but it never seems to complete itself! Any help regarding this matter would be greatly appreciated.

Harm filled in pretty much all the salient details, but I'll do another pass here.
1) How do I avoid error messages in regards to indexing and conforming
Two parts here. One, conforming only happens for certain media files, ie the ones where performance is critical and we can't depend on extracting the audio fast enough for realtime playback. That's basically anything in an .mpeg wrapper, or AVCHD material. So if you edit XDCAM HD/EX or P2, or RED, or even AVIs or QT, those formats don't require audio conforming.
If you're stuck editing AVCHD or MPEG2, then it needs to conform. But, that being said, you shouldn't be getting errors in the first place. I think it's related to your external drives. More below...
2) How do you know when indexing/conforming has completed itself? (there doesn't seem to be a progress log or a list of commands/executions)
Nope, you have a progress status bar indicating which file it's working on. If there's an error, it shows up in the events panel.
3) Indexing and conforming appears to be an automatic process, but is there a way to do it manually?
No.
4) What's the best way to setup your media cache files when you click EDIT > PREFERENCES > MEDIA?
While some people like having the check box for having the conform files beside the media, I hate it. Yes, it means that if you move the project to a different system & reopen, it means that you potentially can avoid recreating CFA files, but I find the drive littering not worth it. I much prefer having setting the Media prefs to point to a specific media drive. Usually a raid, if available. Definitely not an external drive that you disconnect & walk away with. If you don't have a permanent raid on your system, then preferably a dedicated internal drive for media (think along the lines as your Photoshop 'scratch disk'). Failing that, leave it on your C: drive, although with a 64 Gig SSD, you probably don't have much room for transient temporaries.
5) If I have approximately 1 hour of footage, what's an average wait time for conforming/indexing? What about 5 hours of footage? 10?
Like Harm said. Totally dependant on the media container & the speed of your drive i/o. The conforming is iterating through the entire file & pulling audio data, so it's not CPU intensive, it's all i/o.
6) Adobe recommends not editing until the conforming and indexing has completed itself-- how important is this?
If you're trying to play/scrub while conforming, it's going to be pokey. Esp. if you're trying to access the file that's actively being conformd. As I just said, we're hitting the files for all the audio. The i/o is being saturated already, so unless you have a stellar raid, you don't have much headroom.
7) Sometimes it appears as though the conforming and indexing has finished, but then I still have problems with playback. Do I have to reopen the project for it to continue with the conforming/indexing progress? I've already determined that the video file I'm working with is intact and free of any corruption.
You should be good to go. Sounds like there's something else at play here.
Okay, back to what I think is wrong: you don't mention what kind of external drives you're using. You're making a bad assumption that blowing away conformed files & doing a reconform is buggy - I doubt it, as that's the same process that happened when you initially brought in the files. I've blown away my media cache folder multiple times and have never seen failures on reconform. So it's got to be one of two things: either a read error from the source when attempting to pull the audio, or a write error to the destination. Now I don't know where you currently are pointing the media cache directory, or what your source drive is, so I can only speculate.
My suggestion is to do some elimination. Copy one of the files that failed on you to your C drive, & target your media cache directory also to C:. Pick a new project, import your copied file, confirm that it conforms correctly & behaves. Then, try to use the same clip from your external drive, keeping the media cache to C:. If that's still good, then try targeting another (local/internal) drive as your media cache target; close/restart, then import the clip from C:, and then import the clip from your external drive. This troubleshooting should give us something.
PS, if you're trying to edit from external USB drives, good luck. I find it a major PITA that I avoid as much as possible. Firewire isn't much better. I know some people do it successfully, but I think it's a road fraught with peril. These devices are generally not designed for heavy duty I/O and a flaky connection or drive is nothing but pain.
Cheers

Is there a way in fcpx to keep timeline clean for just one scene at a time ?

It would be so wonderful if I could just see the scene I'm working on in the timeline rather than the whole project....
I tried to make a compound clip of all the material related to one scene and double clicked it ....it opened in a single timeline but I felt it behaves a little differently than the parent timeline when it comes to making tracks.....
To be impractically point blank....is there a way of making the project timeline empty when Im treating one particular scene such that I don't see anything else .....and can bring back everything when I want ?

You can't really make the clips "disappear" completely, but you can go a long way to making the workspace more pliable.
Open the Timeline index (2nd icon, bottom left of FCPX) and click the Roles tab. To the right of each role is a small icon.
["normal" timeline view... thumbnails, audio waveforms, etc..]
Clicking on those icons will "minimize" the onscreen information (turn off the thumbnails and audio waves, etc) creating "blank" placeholders.
[Video and Dialogue "minimized"]
You can go one step further and select the clips you want to turn off and type V to toggle their "visibility" (this will eliminate anything from those clips from showing up in the canvas -- it will just be "black" and silent until toggled back on — *and* it will dim the clips further [see next image]).
You can then Assign a custom Role (go to Modify > Edit Roles) and create new custom Video role (and possibly audio too, if you need to isolate waveforms and have them show in your workspace). For the clips you want to work with immediately, select them all and Assign Roles > whatever name you used. In the illustration below, I used "Under Construction". (You can also toggle the canvas visibility of the clips off by *unchecking* the role in the Roles inspector.)
At the right side of the image, you'll see a normal looking clip amongst the "blanked out" clips on the storyline — it was assigned the role "Under Contruction" and its setting overrides the default Video settings. This technique should help you adequately isolate your "working scenes". When you've done, you can either create another role ("finished") or revert the roles back to the plain Video and/or Audio (Dialogue) default roles. (Remember to select and type V again to turn their visibilities back on.)
HTH

Creation of index in BW

Hai Experts,
pls tell me what is the purpose of index and how can we create indexes in sap bw
when we are going to create indexes in real time projects(bw).
for best answers points will be rewarded.
Regards
djreddy

Hi,
Indexes are data structure sorted values containing pointer to records in table.
Indexes are use to improve data reading performance / query performance improvement but decreases data loading/writing performance .We delete/drop them during the data loading to data target and create again after loading finished. In BW normally we include this in process chain.In process chain before loading the data to cube use the delete index process and load the cibe and create index.
If you perform index creation for cube in the perforamence tab it is created automatically by the sysem.
What are indexes
what are the indexes of info cube and use
Infocube > Manage > Performance > Create(Repair) Index/Delete Index.
Database Indexes
With an increasing number of data records in the InfoCube, not only the load, but also the query performance can be reduced. This is attributed to the increasing demands on the system for maintaining indexes. The indexes that are created in the fact table for each dimension allow you to easily find and select the data. When initially loading data into the InfoCube, you should not create the indexes at the same time as constructing the InfoCube, rather only afterwards.
The indexes displayed are the secondary indexes of the F and E fact tables for the InfoCube. The primary indexes and those defined by the user are not displayed. The aggregates area deals with the associated indexes of the fact table for all aggregates of an InfoCube.
Checking Indexes
Using the Check Indexes button, you can check whether indexes already exist and whether these existing indexes are of the correct type (bitmap indexes).
Yellow status display: There are indexes of the wrong type
Red status display: No indexes exist, or one or more indexes are faulty
You can also list missing indexes using transaction DB02, pushbutton Missing Indexes. If a lot of indexes are missing, it can be useful to run the ABAP reports SAP_UPDATE_DBDIFF and SAP_INFOCUBE_INDEXES_REPAIR.
Deleting Indexes
For delta uploads with a large quantity of data (more than a million records), you should not align the database indexes of the InfoCube with every roll up, rather delete the indexes first, and then completely reconstruct them after rolling up.
Repairing Indexes
Using this function you can create missing indexes or regenerate deleted indexes. Faulty indexes are corrected.
Build Index
You can delete indexes before each data load and then rebuild them again afterwards. You can also set this automatic index build for delta uploads.
Thanks,
JituK

FCPX: In Event Library: how to know if a video was used in the timeline of Final Cut Pro X?

In Event Library: how to know if a video was used in the timeline of Final Cut Pro X?
An example: In Premiere Pro, the whole video is added to the timeline identified as used in their video library. Facilitating our work on a big project, not to repeat videos. You can do this in FCPX?

The way it works in FCP:
Working from the Timeline Index, you can see lists of all clips in the sequence and their location in the timeline.
You can also do a search (kevn) to narrow the results.
Russ
hth.
Russ

Indexing Schedule Manager on Server Failed!!!

Hi All,
Below is the error message from the ULS logs regarding the Indexing service. As a result of this, I'm unable to see the Content Sources and Crawl History on Central Admin. I further found out that one of the server in our farm is in Converging Status under
NLB (Network Load Balancer). Could this be the issue? But why would it say access denied. The search service account has not been modified or the permissions have never changed. Thanks in advance for any pointers.
Entering monitored scope (Timer Job Indexing Schedule Manager on WCRSPT02) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
executing job Indexing Schedule Manager on <Server> 8a76f83b-9c75-48d4-8764-61fb0d93ca49
CContentSourceCollection::ValidateTrigger in m_pScheduler -> Activate or NewWorkItem, Error is 0x80070005 [contentsource.cxx:1126] d:\office\source\search\native\gather\server\contentsource.cxx
<Exception><HR>0x80070005</HR><eip>000007FEE2929257</eip><module>d:\office\source\search\native\gather\server\contentsource.cxx</module><line>1127</line></Exception>
The Execute method of job definition Microsoft.Office.Server.Search.Administration.IndexingScheduleJobDefinition (ID 0141a0f4-9c0a-4aa3-901f-f0bd5bb7f51d) threw an exception. More information is included below. Access is denied. (Exception from HRESULT:
0x80070005 (E_ACCESSDENIED)) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
Exception stack trace:    at Microsoft.Office.Server.Search.Administration.SearchApi.RunOnServer[T](CodeToRun`1 remoteCode, CodeToRun`1 localCode, Boolean useCurrentSecurityContext, Int32 versionIn)     at Microsoft.Office.Server.Search.Administration.SearchApi.GetContentSources(Int32
versionIn)     at Microsoft.Office.Server.Search.Administration.ContentSourceCollection..ctor(Content parent)     at Microsoft.Office.Server.Search.Administration.Content.get_ContentSources()
at Microsoft.Office.Server.Search.Administration.IndexingScheduleJobDefinition.Execute(Guid targetInstanceId)     at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean
isTimerService, Int32& result) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
Leaving Monitored Scope (Timer Job Indexing Schedule Manager on WCRSPT02). Execution Time=50.1862666903196
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

Hi,
According to your post, my understanding is that Indexing Schedule Manager on Server Failed.
I recommend to reset Index and have a full Crawl. Please refer to:
Unable to view content sources or crawl history in Search server 2010 Central Administration: share point
You need to check whether you have an additional Search Service Application and is stuck in an error state. If so, please run the configuration wizard to remove the previously mentioned Search Service Application that was corrupted.
In addition, please follow the instructions to check whether it works:
stsadm -o osearch -action stop
stsadm -o osearch -action start -role index
Open Central Admin - select your SSP
Check / validate your search service configuration.
Here are some similar articles for your reference:
http://social.technet.microsoft.com/Forums/en-US/a2f749bf-5d8b-4c0e-8fdd-464bd21d0e0a/indexing-schedule-manager-failing?forum=sharepointadminprevious
http://bruteforcesharepoint.blogspot.com/2009/04/event-log-errors-6481-and-6398.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Regarding Timeline Index

Similar Messages

Maybe you are looking for