Regarding TP tool in transports

Hello ppl,
I ve a question regarding transport tool TP. How mant tp tools will be present in the system?
Scenario is: in a project one basis admin receiving a transport request is importing the request and so in the back end tp wil be triggered and runnin.
in the same time if another person receiving a different transport request also tries to import it. if so at that time the same tp tool wil be triggered once again or a new tp tool wil be triggered to process this new transport request?
Can you please give a a clear explanation?
Bala

the transport tools in SAP are TP and R/3 trans.
r/3Trans is the tool, that does the real work for TP. TP controls the import and export of changes and r3trans does them using scripts, that were generated from TP. ans as explained by sunny TP is a process and runs on the concept of Multiple thread.

Similar Messages

Regarding Contivo tool?

Please anyone can help me out what is contivo tools ? I need some documents,explantion as well.
Regards,
Raja

Have u referred this link
http://www.contivo.com/builder/builder.html

Regarding EDI Tool

Hi All,
Is there Any Drawbacks With the EDI Tools ????
Regards
Vamsi

hi
Go through this may be use ful.
The Risks and Disadvantages involving in the use Of EDI
Trading Partners Involvement - Highly dependence on the participation of trading partners. It is extremely difficult to get a high level of supplier compliance. EDI will be a meaningless if your trading partner didn't get involve using EDI system effectively.
Costly for smaller companies - Many small companies are facing resources problems in getting starter with the initial implementation of EDI system. It is beyond the resources these companies to invest tens or hundreds of thousands of dollars in setting and implementation costs, as well as weeks of personnel training, to get an EDI system running.
Difficult to agreed on standard used - Even though there are widely-accepted and widely-used standards, there are no ways to force trading partners to accept these standards. Cooperation between trading partners is needed in order to develop a common rules to avoid differ in interpretation.
Although there are risks associated with the use of EDI, the benefits greatly outweigh these risks. EDI will lead to improvement in a companys overall performance.
Thanks

Regarding EMIGALL tool

Hi,
I have to load premise data into SAP IS-U using EMIGALL tool what is the procedure to load the data.
please reply.
Regards,

We can get the documentation of EMIGALL in SAP,
Go to Transaction EQ81
Some points about EMIGALL :
1. It Migrates data Business Object wise
2. It uses Direct Input Technique
3. It has more than 100 objects of IS-U
Steps
1)Create a user specially for migration which will have all the authorizations related to migration workbench, BASIS and IS-U
2)Create your own company in EMIGALL. There is a default company called SAP.
3)Company SAP contains all the Business Objects
4)Figure out what business objects u need and then u have to copy those business objects to ur company from Standard Company SAP
5)Each objects contains more than one structure and each structure can contain more than one fields. The relation goes like this
Object ---> Structure ---> Field
6)Define field rules for each required field of the object. You have to mark "Not required" for fields u don't need
7)After field rules for a given object is set u have to generate load report i.e. actual Direct Input Program which will migrate data. This program is generated on basis of field rules set by u.
8)After the load report is generated u have to prepare an input file (import File) for migration. The import file should be according to structure provided by SAP and must be in binary format. SAP Provides the structure of file according to your configurations. You have to write ur own Data conversion program(in any language) for this task.
9)Import file as input and migrate the data using generated load program
10)Finally check the Migration Statistics and Error Log
Kanagaraja L

Regarding ticketing tool

Hi
can any one tell me about 1 ticketing tool in detail, or pls send me the links.
i have 5 process chains running,they r taking long time how to improve the performance.
regards
subbu

Hi,
What all steps are included in your process chain? Is it taking long time to get completed?
Regarding process chain performance:
Normally its better to create process chain seperately for Staging layer(Upto DSO level) and the other for Reporting layer(To load Cube leve data).
Delete indexes before DTP execution for Cube and create index will improve loading into the Cube.
Any ABAP programs involved in your process chain with complex code. That might be also the reason for which process chain completion may take long time.
Hope it helps!!!
Thanks,
Lavanya

Regarding BR Tools Upgrade procedures

Hi Techies,
While Upgrading the BR Tools iam having the following doubts:
1.Kernel Upgrade from 640 to 700 includes BR Tools.exe also upgraded ,this is ok or
2.Any Other wat to upgrade BRTools separately.(from the current version to marketplace existing version)640 to 700
can any one suggest me the better soltuion in upgrading the BRTools with the procedures and prerequisites
solutions awarded for sure!
regards,
eksrKumar

Hi ESR Kumar
The BR*Tools 7.00 can be used for all SAP releases that run with an Oracle 10g database, or an Oracle 9.2 database after installing the Oracle Instant Client 10g on the Oracle 9.2 database server.
For more information, see Note 849483.
Best Wishes.
Kumar

Regarding BR * Tools/SAPDBA

Hi all,
I want to know what is the main difference between BR* tools and SAPDBA, are these 2 different or same? Is this dependent on WAS version? Can anyone explain me difference?
And i know path to down load BR tools:
Main path as starting point
--> SAP NetWeaver
    --> SAP NETWEAVER
      --> SAP NETWEAVER 2004S
        --> Entry by Component
          --> Application Server ABAP
            --> SAP KERNEL 7.00 32-BIT
              --> Linux/IA32 | Windows/IA32
                -->Oracle
                  --> DBATL700O10_nn
What about SAPDBA?

Kittu,
           Brtools, SAPDBA both are SAP's backup utility tools.From Web AS 640 onwards only Brtools are used/avilable. SAPDBA in ended with Was 620. i.e 4.7EE Extset 110 is the last product where you find SAPDBA.
           I hope you are clear now..., so down load as per your version as part of kernel patch.
Regards,
Hari.
PS: Points are welcome.

Regarding Client change for transport request

In 46C system, How to change client for transport request?
Before Upgrade, we have Trans Request-DEVK900002 for client XXX, and this client does not exists anymore. now How to delete this trans request or release it.
one of the way i think is to change client for transport request and release it. Please share your suggestions.
regards
Jaichan

Hi shlesa,
Thanks for your reply.
I tried now..it does not worked out.
i created request at 000 using DDIC and then logged with 001 client using DDIC.
then i executed SCC1, gave Source Client 000 and Request number and executed.
i checked in SE09, was still the Request appeared with 000 client.
Any other alternatives.
Jaichan

Regarding GUIXT Tools

Hi All,
GUIXT Tool is for modifyind standard screens. but how can we modify using this tool. fo example if we want to do some modifications in vk13. we have to go t vk13 and activate GUIXT Tool.
from where we can activate this tool.
explain me in details.'
Thanks in Advance,
Regards,
Ramana Prasad.T

Hi,
Please check these links perhaps they may help.
http://help.sap.com/saphelp_erp2004/helpdata/en/89/91b9d8194f11d5b3a30050dae02d7c/content.htm
http://www.synactive.com
http://www.synactive.com/docu_e/specials/guiscripting.html
http://service.sap.com/guixt
Regards,
Ferry Lianto

Regarding Performance tool

Hi Everyone,
I want to check the performance of my weblogic , which tool is good for performnce checking. I need open free software tool , can u guide to me ,which is good tool and there documentation .
Thanks
Rocky

HI iam trying to use jconsole for my weblogic to chwck the performance , iam getting the error as
Exception in thread "AWT-EventQueue-0" java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.**GraphicsEnvironment*.*checkHeadless(GraphicsEnvironment.java:159)
at java.awt.Window.<init>(Window.java:431)
at java.awt.Frame.<init>(Frame.java:403)
at javax.swing.JFrame.<init>(JFrame.java:207)
at sun.tools.jconsole.JConsole.<init>(JConsole.java:97)
at sun.tools.jconsole.JConsole$6.run(JConsole.java:770)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

Regarding Reporting Tool : Report Writter

Hi Experts,
I need to incorporate the below requirement in Report writter.
Please let me know where should I do setting or changes to meet this requirement.
Whenever I execute report writter I have an output displayed with rows and column.
First column is the description of line items.
When paging to the right, the left-hand column (which provides the line descriptions) should be retained.
Thanks,
Yogesh Chawane,
CAI:- YOGC.

Hi,
Go to report layout under formatting.
Go to lead column tab and check the box repeat lead column under miscellaneous.
Hope this helps.
Please assign points as a way to say thanks.
regards,

Please suggest regarding reproting tools

Hi
can any one tell which reporting tool is better to learn (i mean to learn quickly .) .My company people given these two reporting tools(Finacial &Financial) and said learn any one . i have little time to spend on reporting tools.
please suggest

Each tool has its strength with various types of data.
What is the data source? Relational or MultiDimensional
What does end result need to look like? Pixel Perfect reports or dashboards.
Wayne Van Sluys
TopDown Consulting

Regarding Pen Tool

how do i duplicate certain parts of a path? cuz i'm tryin to join curves together and they are not smooth is if i try to trace it again
[IMG]http://i40.photobucket.com/albums/e227/fusioniz/Adjoining.jpg[/IMG]

fusioniz,
When you have a path (a vector path as opposed to the pixels in a raster image that may look like one), you may click a segment of it between two Anchor Points with the Direct Selection Tool and then Ctrl/Cmd+C and Ctrl/Cmd+F/V to place a copy of that segment.
You may need to move it in the stacking order shown in the Layers palette/panel. If you want it at the very front, you may click Ctrl/Cmd+X+F to get it there easily (similarly for the very back).

Regarding SECATT Tool

Hi,
I have a issue related to SECATT Transaction.
Actual issue here is i need call SECATT TCODE From my program to execute my test scripts.
SECATT's program is SAPLECATT_MAIN which is of type function pool how can i do it.
I may not be able to use SUBMIT statement as it is not Executable program.
Can anybody solve my issue.
Thanks in advance.
Thanks & Regards,
Rayeez.

Can you try using Call transaction 'SECATT'.

Regarding Diagnostics Tool

hi guys
i have gone thru few Threads, suggesting us to follow below
steps needs to be done for EWA - Java.
basic steps for JAVA EWA:
1)configure solution manager diagnostics tool in solman
2)install wily interscope manager in solman
3)install SMD agents in satellite system
4)install wily agents in satellite system.
5)make sure about the sp level in satellite system.
The wily files depends on the SP - level
How to execute step 1 "configure solution manager diagnostics tool in solman".
any guide please. Step 1 indicates to execute Diagnostic Setup in NWA?
Appreciate your response.
regards

Hi Markus,
Thanks for your reply.
I am working on Solman7.0 SP16, trying to setup EWA for JAVA.
I could not find which document exactly to follow for this step 1 task.
Could you please be tell me which document is available now inside this link.
regards

Regarding TP tool in transports

Similar Messages

Maybe you are looking for