Regarding transfer structure

hi experts,
what is the use of 'opening BAL '

Hi,
Opening balance is used to determine the year to date balance. For e.g. the year end closing balance for 2006 is 300K USD, it will become the opening balance for year 2007 and the year to date balance will be determined by opeing balance + actual line item postings.
Hope it helps
Thanks
Soumya

Similar Messages

Transfer structure

Hi All
i have to create a transfer structure.
in dso and cube i have 27 fields.
but in tranfer structure it is showing 50 fields.
i have to select the 27 fields out of 50 or i have to activate 50 fields in transfer structure.
Thanks & Regards
krishna

Hi,
Basically when creating the transfer structure you need to map the transfer structure fields with the ODS/Cube fields that are present in the communication structure.
You just need to Transfer the fields, that you have identified in Data source to the transfer structure and map the relevant fields in the Transfer structure.
Once the mapping is done. Just activate the Transfer structure.
Most importatnt would be to decide on the mapping between data source and Communication structure fields.
Hope it helps!!!
Regards,

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Transfer Structure Status - Clock Symbol

I have data in my ODS and have moved that data to the cube. I have lost some of that data in the cube because of a delete of overlapping conditions. I need to get that data back into the cube from the ODS. I was going to load it from the ODS, but when I did, it only loaded a small portion of the packages from the ODS. The reason is because after our ERP upgrade, we had to activate the InfoSource. Now when you look at the Reconstruct tab in the ODS, the normal double green check marks have now been replaced with one check mark and a clock symbol. It appears this data cannot be recovered. Does anyone know if it is possible to recover this data and be able to move it to the cube.
Thanks, Keith J

Hi Keith,
When ever there is change to transfer structure in re construction tab we will get that clock symbol. In your case as you are loading data from ODS to CUBE , from your first load from ODS to recent load there is change in your ODS object structure,that is the reason u are seeing clock symbol.if u are trying to reconstruct your requests it will pop up a message stating that to ignore the request click no,I think it will upload that request again,if not do an init load from ODS again and schedule your deltas regularly
Regards
KK

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer Structure Creation

Hi,
I am trying to develop a tool to automate the transfer structure/info source creation. Does anyone know the table or function modules that create these?
Thanks in advance.
Alex.

Hi:
In transaction BAPI,
check the BAPI BAPI_ISOURCE_MD_T_CREATE in the Data Warehousing BAPIs (Under InfoSourceMasterXfer).
Thanks for any points you choose to assign.
Best Regards -
Ron Silberstein
SAP

Transfer structure have two different tech names?

Hi BW experts,
we got issue in transfer structure which have two different technical names:
ZCUSTOMER_DC and
ZCUSTOMER_PS
where zcustomer is the info source name.
The impact: PSA data can't be accessed ...
Any help and feedback is highly appreciated!
Regards,
Lilly

Hi Dinesh,
Thanks for your feedback.
Unfortunately, this issue is thru our system landscape incl. production. If I try to delete the DS assignment I will lose data in the PSA, right?
However, I did try to delete the DS assignment and delete the info source (the one which is available on dev only), failed, the message I get is info object xyz still being used in communication structure (I believe it must the TS with old prefix), deletion not possible.
The problem is I am not able to delete the TS with old prefix , because it is not visible in system (AWB).
Any further feedback appreciated

Transfer structure copied into another structure ?

Hello ,
Iam trying to transport an transfer structure and iam getting an error and when i looked into the SE09 log i noticed somethng strange .
I am not understanding why a transfer structure is copied into another structure as shown below in Bold while transporting ??? is this somethng normal or somehtng happening strangely in my system ?
" Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
Transfer structure 80MATERIALM_CB activated under the name 80MATERIALM_CA
It is not necessary to copy dependent objects for transfer structure 80MATERIALM_CA
Object 80MATERIALM object version not found in table
Activating Transfer Rules 80MATERIALM_CA ...
3 Transfer Rule(s) of the transfer structure 80MATERIALM_CA removed from control table
3 InfoObject(s) of the transfer structure 80MATERIALM_CA removed from control table
Formulas have been saved
Saving Structure /BIC/CACA80MATERIALM ...
Activating Structure /BIC/CACA80MATERIALM ...
Saving Structure /BIC/CCCA80MATERIALM ...
Activating Structure /BIC/CCCA80MATERIALM ...
Saving Structure /BIC/B0000015000 ...
Activating Structure /BIC/B0000015000 ...
 Object 80MATERIALM object version not found in table
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Delete Mode)
Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import methods of change/transport request CD3K900107 completed
 Start of subsequent processing ... 20060821140054
 End of subsequent processing... 20060821140146"
Your inputs are highly appreciated !!

Gimmo,
Do u mean i need to install and transport 0material to test system ??? coz currently i didnt install 0material in dev also thnking i dont need coz its an export datasource .
Regards
Deenu

Transfer structure prefix error

Hi all,
 When i active the transfer structure of any infosource of Ecc5.0.,I got an error message 'Transfer structure prefix for source system T90CLNT090 is not defined'. The source system T90CLNT090 is the current client of bw system.Any one who met the problem before,or have some idea about this,appreciate for sharing your experience.
best regard,
Eric

Hi Natovian,
Thanks again for ur time replying me!
I tried to follow what ever u said.. but still unsuccessful.
The Following is the screen that appears after I used SE37--> RSAP_BIW_DISCONNECT:
http://farm1.static.flickr.com/212/495977912_6f890cad34_o.jpg
I tried to see the entries for SLOGSYS & RLOGSYS using the TCODE SE16, following is the RSBASIDOC table screen which appears as:
http://farm1.static.flickr.com/208/495995911_2213885c8e_o.jpg
From the above table(screen) which combination do I have to use as entries to the following Screen(Using SE37 RSAP_BIW_CONNECT) :
http://farm1.static.flickr.com/226/495977908_9c0ee51f29_o.jpg
D I have to enter an entry for the RFC target system:??
Note: I am Using SAP ECC 5.0 IDES version; have 3 source systems defined
 1. Source system T90CLNT090 with clinet 800 ( through which I run rsa1 to move on to BW 3.5 Administrator Work Bench screen) .Its a Combined Client I guess!! But basically I enter into R/3 System first before I jusm onto BW screens
 2 nd and 3rd are the Flat File Source Systems(SS_DEMOFF & SS_ODSFLAT) which I created by my own. and My use ID is SAPUSER for 800 Client to enter SAP.
Do I have to have a BW source System as well do make this work??
I have selecetd and tried the folloowing entries from the RSBASIDOC table :
http://farm1.static.flickr.com/191/495977906_e10a056721_o.jpg
and in the result, it says that the logical system already exists.
I even tried using the flat table combination but the follwing is the result screen:
http://farm1.static.flickr.com/226/495977956_073272c7ab_o.jpg
I tried my level best to actually let you know, whats really happenening with my issue.
Hope u will have a clear picture of my problem.
Awaiting for ur precioius reply!!
Vamsi.
I tried defining a BW source system but got stuck in the middle filling up those details.
Thanks

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran RS_TRANSTRU_ACTIVATE_ALL program but still in the job log finding some problems like 0BP_RELTYPES_TEXT is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Transfer Structure - Transport Problem

Hi Experts,
I am transporting infosource from BW DEV to BW QA ( Datasource is transported and it is replicated) but when the request is imported in QA it gives me error saying " Transfer structure does not exist " . This Infosource is used for Remote Cube .
Could anyone help me in this as in QA I see Infosource in Deactivated state even though remote cube( based on this Infosource) is active .
Regards,
Vijay.

hi Vijay,
seems transfer structure not collected, maybe source system not choose/assigned. try in bw dev, with infosource selected for transport, choose grouping 'in dataflow before' and collection mode 'manual', click 'source system assignment' and make sure your source system is marked. then execute to collect objects. after finished, expand the infosource, and make sure there is transfer structure and marked. then create transport request, stms and transport again. hope this helps.

Transfer Structure activation

Hi all
I need to execute a specific Infopackage in the Quality System . However , When i try to open the infopackage it gives a message saying " transfer structure not yet active " . When I go to the Transfer structure and try to activate it , i get a message saying " Cross Client customising not allowed " .
Can anyone please help me resolve this issue . I am pretty new to BIW .
Thanks & Regards ,

hi,
you have to transport the transfer structure/rule from Dev system. your QA is set to not allowed changes.
to transport, logon to Dev system, transaction rsa1 >> transport connection >> choose 'object types' in left frame then find 'infosource' in middle frame and expand, click 'select object' and entry your infosource where the trasnfer structure belongs to. make sure the source system is marked in 'source system assignment' (click yellow box with X), choose 'in dataflow before' for grouping and collection mode 'manual'. expand the infosource, make sure the transfer structure is there and marked. create request and transport.
hope this helps.

Transfer Structure / Transfer Rules comparison or copy

Hello,
We have our BW dev system linked to both dev and QA R/3. Consequently, the transfer rules are created manually for the QA.
Do you know if there are any tools to compare the transfer structure/rules for given data source and source systems?
Regards,
Michal

Hi Michal,
What I understood is, you have only one Bw system & both R/3 Dev and R/3 Quality boxes are connected to it and you have to take data from both boxes to BW system.
I do not understand the cause of this kind of system landscape but you can assign the another data source to same infosource then you will see data comming from two system one will be for R3 Dev and other for R3 Quality.
Hope this will help you
Suneel

Transfer structure Activation Problem

hi guys...
i've just installed new bw system and done all post processing steps correctly...
while working in this bw...
if i try to activate any Transfer structure, it is giving an error with the message...
'no ddic tabel /bic/000004000... exists...'
if i go to detailed message...
it is saying that this table shud be created by the system automatically.. otherwise create one in the database utility(se14)...
what does it mean... i'm not understanding what table is this and y i'm being asked for this...???
pl tell me the solution how to rectify this problem...
thank you all
regards
nithin

hi...
verson is 30B
if i try to activate again the tabel number in the error message is changing...like /bic/00005000... some number...
is it any problem of any number ranges or what...???
regards..
nithin

Transfer Structure Error

Hi Guys,
I am getting the following error when trying to activate Transfer Structure for 0PLANT_TEXT in BW.
Error when creating transfer structure /BIC/CCGB0PLANT_TEXT in source system ORAGDV130
Message no. R3104
Diagnosis
An error occurred when creating transfer structure /BIC/CCGB0PLANT_TEXT as an IDoc segment in source system ORAGDV130 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system ORAGDV130 to identify the error, and remove the cause.
I am using PSA as the transfer method. Any help is appreciated.
Thanks.

Hi Govind,
To implement what is said in the note IS VERY EASY!
I have even created this program in my system. It seems to be very very useful program. Not only for your case. THE PROGRAM CHECKS CONSISTENCIES IN THE SOURCE SYSTEM AND CORRECT THEM! It may help in many problems with source systems.
So, here is a way to implement the program.
- In the text tabstrip of the note click on 'Correction Instructions' tabstrip.
- Then in the 'Ref. Correction' column choose a number that corresponds to your system PI (click on it).
- Click on a report name 'z_rs_scrsystem_r3_check'.
- In your BW system execute tcode SE38 (or ask someone with a development key), give the name 'z_rs_scrsystem_r3_check', click on a button 'create'.
- Enter program description, choose 'executable' option.
- Into the screen of ABAP Editor copy-paste the code from the note correction instructions.
- Click on 'Check', then 'Activate' icons.
- If everything is OK, press F8 (execute).
Then follow the note:
"These programs have the following input parameters:
SLOGSYS Specify the logical system name of your source system here
RLOGSYS Specify the logical system name of the BW system here
If you enter nothing here, all existing BW source system connections are processed.
Use the NO_DB_UP parameter to control whether the program works in check or correction mode. The NO_DB_UP = 'X' default represents check mode.
2. First execute the Z_RS_SCRSYSTEM_R3_CHECK program in check mode. The inconsistencies detected by the program are issued as a log. Now start the programs in correction mode (NO_DB_UP = ' '). Then execute the program again in check mode (NO_DB_UP = 'X'). This program may not eliminate all inconsistencies during the first correction run. Then execute the program again in the check mode (NO_DB_UP = 'X'). This program may not eliminate all inconsistencies during the first correction run.
3. If the error continues to occur:
Check the transfer structure in the source system using transaction SE11. Use note 147195 if namespace conflicts are reported in the consistency log.
After the correction has been made, you should check to see whether it is possible to switch your transfer rules from the IDoc transfer method to the PSA transfer method.
We recommend that you use the PSA transfer method."
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Regarding transfer structure

Similar Messages

Maybe you are looking for