Regarding transport management

hi,
will you please tell me wht is transport management system?
thanks & regards
ramnaresh

Hi Ramnaresh,
Transport Management system helps the SAP basis guys to transport or transfer the technical data in the form of reports or any confguration changes made to the Development system to the Quality and the Production server.
For this,the T-codes used are
SE09 : Transporting or releasing the Workbench objects(ABAP development).
SE10 : Transporting or releasing the Customising objects(Configuration changes).
STMS : Importing the objects from the above mentioned T-codes.
Whatever changes or developpments that you do in the Development server can only be reflected in the Production server and the quality with the help of Transport System.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Similar Messages

  • Transportation Management configuration

    Hi
    everybody
    can you help me regarding Transportation Management configuration steps ineed to configur to my client

    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf

  • All Information regarding Change and Transport management System in SAP

    Hello Experts,
    Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc.  I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
    Useful answers shall be rewarded points.
    Thanks and Regards,
    Somya

    check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

  • Demo on SAP Transportation Management Overview + End to End Process Flow by Navin Nadpurohit-SAP TM Consultant - Krypt Inc-a Leading SAP Supply Chain Company

    Hello All,
    Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
    Link:
    TM Overview + End to End Process Flow - YouTube
    Thanks and best regards,
    Navin

    Very Good Demo Navin

  • Transport Management in SOlution Manager

    Hello All,
    We are currently running a Conf. Room Pilot for our customer. As part of the CRP, the customer has created a new template project in Solman and have also a created a new sandbox as a copy of their production for the CRP where we have got full access.
    The customer wants us to use SAP transport management functionality in Solman where all transports & changes made in the sandbox can be tracked and they can be moved to their production if required using solution manager.
    Now customer doesnot want to configure ChaRM.
    Two possiblities I see are
    1. Create an IMG project in Sandbox system through Solution Manager and in the Sandbox systems' project activate CTS functionality. Give TR Create authorization to team members with restriction of assignment to CTS project only. (Dis-allow TR creation w/o CTS project assignment in Sandbox)
    2. Activate Change Request Management (ChaRM ) in the template project with only CTS functionality (No other functionality of ChaRM is useful here). At the moment I am not sure if this will be allowed.
    please let me know, how do I restrict creation of TR without assigning to CTS?
    Regards,
    Shyam

    Any answer to this?

  • Setting up of Transports Management System  in EP7.0

    Hi Experts!!!!!
    Can you please provide the documents or links for configuring the transport management system for EP 7.0 Systems.
    Regards,
    Vamshi.

    Vamshi,
    These could be helpful.
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
    Reward points for handy posts!
    Cheers,
    Sandeep

  • How to Configure Transport MAnagement system in CHARM

    Hi
    How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
    Can any one tell me the detailed process? If you have any Configuration document please share it to me
    Points will awarded for helpful answer
    Thanks
    Bhaskar

    In a two system landscape is it necessary to make development the domain controller always?
    No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
    This is not recommended.
    Regards,
    Ashutosh

  • Transport management system in ABAP

    Hello Abappers,
    Could you please provide me with the guided procedure of how the transport management system in ABAP works?
    Please explain it in detail.
    Points will be rewarded for relevant answers.
    Regards,
    Mansi.

    Hi,
    Try these links...
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSTMS/BCCTSTMS.pdf
    http://www.bayerbbs.de/fileadmin/user_upload/bbs_internet/pdf/brochures/Einkauf/TM3%20Broschre_en.pdf
    Do Reward points if useful....
    Regards
    AK

  • SAP APO Transportation Managment 5.0

    Hi,
              I would like to know the the process to Implement Transportation and Planning 5.0 in SAP APO environment ,presently the client is using SD for transportation and distribution.
              If you could mail me implementation guide in regards to Transportation Managment it would help me a lot.
                Could u send me some links which will help me.I have refer to master Data sep-up and understood the process in help.sap.com.
    Thanks
    Partha

    Dear Partha,
    Pl. find the below link
    http://help.sap.com/bp_scmv140/BBLibrary/documentation/S12_BB_ConfigGuideEN_DE.doc
    This guide will show you basic configuration settings to be made in both the systems. Though it does not list all the configuration, but it is quite useful guide to begin with.
    Regards
    Sandeep Patil

  • Need blogs for transport management at SOLMAN4.0SP11 and above

    There are many blogs in this group but none of them is about transport management.
    Please help provide some. Thanks a lot!
    Best!

    Hi,
    Good Question...
    Usually if the systems are connect to each other, the objects move from one system to other when the transports are released in background, That to depends on whether they have to be imported into the target system immediately or every 1hr(time frame) is defined by the basis team as per the requirement.
    But if the systems are not connected, then after you release the transport request, the basis team will export the log/data files from the source system corresponding to the transport and import back to the target system. This is manual process and is similar to the automated process listed above.
    Basis team uses from transaction to export and import these files..and i am not aware of them. Please get in touch with your basis team for the same.
    Hope this helps
    Regards
    Shiva

  • REGARDING TRANSPORTATION OF OBJECTS

    hello friends,
    I NEED INFO REGARDING TRANSPORT INFO
    first i transported the datasources from source system(dev) to source system(quality) and then i replicated them in to the bw(quality) system. after that i given the source system mappings in the bw(quality system) and then i started transporting the objects independently in the following manner.
    transport connections:
    collection mode: (start manual collection)
    and then i collected all infoobjects and clicked on the gather dependent objects ( the option which is available for the start manual collection option in the collection mode tab) and then i set a package and then i transported . in the same manner i created transport requests seperately under the same package for the infosources , datatargets,update rules. and then i released the requests and in the quality system we successfully imported the objects(infoobj,infosources etc....). but one infoobject for example 'X' which is a dependent attribute for the another infoobject 'Y' is inactive in the quality system(bw). but X is active in the bw(dev) and when i imported the object it exists inn the bw(quality) but in inactive mode. because of this all the dependent objects like datatargets are not active. once again i released the infoobject 'X' [which is active in bw(dev)] seperately by creating a seperate request and then imported but still it is inactive. i tried several times but i am failed. shall i install that infoobject('X' infoobject ) from business content(in bw quality). if i do so does it effect all the imported objects. pls let me know.
    thanks & regards,
    harish

    dear bwer and anand raj and friends,
    when i am trying to import '0crm_f_cust'(X) object i am getting the following error
      Start of the after-import method for object type R3TR IOBJ (Activation Mode)
      Error/warning in dict. activator, detailed log    > Detail
      Value table /BI0/SCRM_F_CUST is not active
      Search help /BI0/OCRM_F_CUST is not active or does not have parameters
      Enhancement category for table missing
      Enhancement category for table missing
      No active nametab exists for /BI0/SCRM_F_CUST
      Termination due to inconsistencies
      Table /BI0/SCRM_F_CUST (Statements could not be generated)
      Flag: 'Incorrect enhancement category' could not be updated
      Enhancement category for table missing
      Table /BI0/SCRM_F_CUST is not a database table => not suitable as selection method
      Row type /BI0/SCRM_F_CUST is not active or does not exist
      Table /BI0/SCRM_F_CUST is either not active or inconsistent
      Srch Help /BI0/OCRM_F_CUST could not be activated
      Table /BI0/SCRM_F_CUST could not be activated
      Table Type /BI0/WSCRM_F_CUST could not be activated
      View /BI0/RCRM_F_CUST could not be activated
      Domain /BI0/OCRM_F_CUST was activated (error in the dependencies)
      Data Element /BI0/OICRM_F_CUST was activated (error in the dependencies)
      Return code..............: 8
      DDIC Object TABL /BI0/SCRM_F_CUST has not been activated
      Error when activating InfoObject 0CRM_F_CUST
      Start of the after-import method for object type R3TR IOBJ (Delete Mode)
      Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
      RS_AFTER_IMPORT belongs to package RS
      The errors affect the following components:
         BW-WHM (Warehouse Management)
      Post-import method RS_AFTER_IMPORT completed for IOBJ L, date and time: 20060620132453
    pls let me know the solution.
    regards,
    harish

  • Problems with Transport Management System

    Hi All,
    i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
    DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?

    Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
    Regards,
    Abhishek Jain

  • Change Request Management without Transport Management

    Hello Change Request Management Experts!
    I have understood that It is possible to take change request managment in use without transport management. So I could handle Change Request with different statuses without automatic funtions behind these statuies. We like to see how to handle changes between different roles of people and implement the functions after that.
    I suppose that I should take only Change Request (approvals) and not Change Documents (execution) from Change Request Management.
    Have any of you tried to do that? 
    Best Regards, Leena Nissilä

    Hi Andy,
    Thank you for your answer. I have tried to do that also but I where is still some configuration missing because I get error message in: No maintenance cycle is open for the current system. I have also tried to to that maintenance cycle but I thought that it needs CTS activation in some project.
    I also like to know what is minimun configuration for change management that I could use SDAD with Service Desk.
    I looking forward to you reply,
    Br Leena
    Edited by: Leena Nissilä on Sep 17, 2008 1:24 PM

  • Change Request Management without Transport Managment System

    Hello,
    we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
    What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
    Many thanks in advance.
    Jenny

    Hi Jenny,
    you can do this with the following activities in your custom Business Transaction (BT):
    - remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
    - remove the action from the actions depending on user status (TA: starting from SPRO)
    - unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
    The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
    Please let me know if you need more details, otherwise please reward the forum points
    Regards ,
    Giampaolo

  • Transport managment, source system changed in import

    Hi all,
    i faced with the need to change the source system in transport management. I mean, dev source system to assign a different test system source. now is the following:
    InfoPackage ZPAK_4MSK400H4M9FGMEKV9ZGDSN4M, source system LGDCLNT300 changed by source system LGTCLNT010 in import (tr STMS).
    I'm looking for opportunities to change the target source systems LGPCLNT010.
    Where can I find a setting to change the source system during the import?
    Thnx.
    PS LGPCLNT010 source system already exists in test. only need to assign LGDCLNT300 (DEV) -> LGPCLNT010 (TEST).

    Hi,
    The entries  are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
    Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
    Regards,
    Durgesh.

Maybe you are looking for