Regarding transporting datasource from DEVB system to QA system

HAI
Im extracting data from Oracle Source Tables by using DB-Connect.
I created datasource in RSDBC like 6DB_ZPMLEVENTINFO.
I want to transport this datasource from development system to QA system .
So how can i transport it from development system to QA system .
pls tell me
i ll assign the points
bye
rizwan

Hi,
Which Source System (DB-Connect) is connected to your BW QA system. You have maintain Source system mappings for datasource transports
AWB --> Tools --> Mapping of the source system names..
Once you have configured this screen, you would be able to transport your datasource.
Uday

Similar Messages

How the data extraction happens from HR datasources from R/3 to BW system.

Hello All
How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
Searched forum but couldnt able to find the relevant one.
Thankyou
Shankar

Hi Shankar.
HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Follow this link for details on customization and dependencies for all CATS datasources.
http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
Regards,
Swati

Regarding Transport request from system to file or product CD

Hello Gurus,
Can anyone tell me how to transport transport request from system to file or product CD.
It is urgent.
Thanks in advance.
Best Regards,
zubera

Hi Albert,
Thanks for your reply.
I want to know the steps how to tranport TP ( tranport request ) from system to file.
Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
Thanks in advance.
Best Regards,
zubera

Transport Datasources from Source

Hi Experts,
My requirement is to transport datasources, enhancements etc from CRM dev to CRM qa as they are stored in package $TMP I donot want to miss any objects in transporting from dev to qa. would anyone explain me how to collect each and every object thatis datasources, enhancements etc from $TMP and move into Zpackage. I appreciate it in advance.
Thanks and Regards
AKReddy.

Hi,
Try to collect all the dependent objects manually and when you try to transport it, it will ask for a request qherein you need give the package name first and then create a request and transport it.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting data from DevBI to QualityBI

Hi all,
After transporting SD cubes,along with some warnings I received the foollowing error in BI quality system..
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                        |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                                |
Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
I remember that sometimes transport error occurs if there is data inside master data object.Remove the data and transport the infoobject again.Is that right?
Please help me out how to resolve the error.
Thanks.

Thanks for the reply.
I dont have an intention to delete the data from infoobject.
Somewhere I read that transport error results in some cases if there is data inside the infoobject.I am not sure if its correct or not.
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                        |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
     | Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
Inorder to solve the error,what should i do?
Please reply back.

Transporting DataSources in (ECC) problem

Hi SCN,
Just wanted to ask if these are only the two important nodes when collecting and transporting an enhanced datasource?
I am currently transporting datasources from ECC DEV to ECC QAS. When reviewing my datasources in QAS, append structures were not transported.
- What I did here was to transport datasources from RSA6. I though it would carry all the changes made in the datasource but it was just the active datasources.
So I collected the datasources again in a new TR; collecting the requests only in one TR (as per discussions in SCN). First is re-activating the append structure; putting it in a new TR, then collecting the active datasource.
I am just having doubts if I am missing a step since the (Go To -> Object Directory Entry) is not letting me make a new transport inside the extract structure (double clicking the datasource; double clicking the extract structure; then object directory entry), thus, I am not able to collect the standard extract structure table (or is this because the datasource I am transporting is a standard one?).
Thanks in advance for any assistance you can provide.
Thanks.

I always thought that I need to collect it in one TR (Active datasource, Extract Structure and Table Structures). But, it was okay to have the append structure in another TR.
What I did was to transport the DataSource then followed by the append structure's TR. It's all good now.

Error Transporting PI (XI) Web Service Datasource from BI BW 7.0

Hi all,
I have a PI (XI) datasource in development.
While transporting this datasource from Dev ==> QA, the transport keeps failing.
If the datasource is active (BI 7.0), it should be transported to QA without any dependency with other objects?
PI (XI) source system has been setup in QA.
Any ideas? Following is the error I get.
Error generating Web service /BIC/CQZHRCM_T00005000
Error when activating Datasource ZHRCM_TD_MELLONPENSION_INTF Q06CLNT100
The DataSource ZHRCM_TD_MELLONPENSION_INTF(Q06CLNT100) does not exist in object version A
Thanks
Edited by: Rajen SAP BI on Aug 30, 2008 12:44 AM

Hello Natty,
1. yes the test passed. http://picasaweb.google.de/lh/photo/kcDy5FofEl9VT4jw2m6FZQ?feat=directlink
2. Yes, I try to access a regular oracle DB via JDBC.
3. The Error occurs when I'select the Datasource and entered a table name and then click the search button. http://picasaweb.google.de/lh/photo/iYPCjcdqIclUet1cNj-LNQ?feat=directlink
Thx for Help
Sebastian

Transport from Non-Unicode to Unicode system

I'd like to transfer program from SAP 4.6c to SAP ECC 6.0.
But source system is Non-Unicode, and target system is Unicode.
I exported transport request from SAP 4.6c into files:
K920948.D51
R920948.D51
then importing into SAP ECC 6.0 by STMS and getting error:
"Program ZRM06EF00: Syntax error in line 000000
The program 'ZRM06EF00' is not Unicode-compatible,according to its program attributes."
What should i do?

Hi:
It is required to make the change accordingly of UCCHECK.
So upload in the higher version, and check its syntax error first and then activate.
Regards
Shashi

Transporting active version of datasource from DEV to PRD

Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
Thanks

Hi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy

CHARM error - No Target system for Normal transport generated from another client

Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salman

yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

Transport Error - Datasource not available in the target system

Hello exports,
-- We have a custom Inboject zvendor
-- text master data is coming from 0vendor
-- need to transport the datasource 80vendort of the datamart + some other objects along with it.
-- transport from CLDEV1 to CLQLT1
-- included: datasource 80vendort, trasnfer structure, transfer rules.
-- error: Datasource 80vendort does not exist in the source system CLQLT1 of version A.
-- could you please suggest me if i have missed something in here.
Measures taken:
-- i have tried doing generate export data source in the CLQLT1 system also.
-- replicated the datasources for the self source system in CLQLT1.
-- observed that the datasource 80vendort is not yet visible in datasource overview of the self source system of CLQLT1.
Solution:
-- create a new tranport only for the datasource 80vendort, transfer structure and transfer rules.
Wondering if this solutions would work. Is there any thing I am missing...?
Please suggest. Any suggestions are highly appreciated.
Thanks,
Sweatha.
Message was edited by: Sweatha Mohan

Hi Sweatha,
When we are transporting data source, did you know that we should first transport the data source from R/3 DEV to R/3 QA (Source Systems) and replicate them to BW QA later on?
Because if we transport BW Objects first, we will get similar errors such as what you have experienced.
Hope it helps and if it did, award me points...
--Jkyle

Transporting Transport Request from One System to other

Hi All,
I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
Please let me know steps for creating transport request and transporting transport request from one system to other system.
Thanks in advance.
Best Regds,
zubera

Hi,
You cannot transport request from ECC5.0 to ECC6.0.
Instead follow this:
<b>In ECC5.0</b>
Include all the objects into a transport request & provide the transport request no. to BASIS.
BASIS team will create 2 files for you based on the transport request no.
<b>in ECC6.0</b>
Provide the 2 files to BASIS Team & ask them to import them.
The objects would be available in ECC6.0
Best regards,
Prashant

Transporting module pool program from sand dev to dev system

Hi,
Can any body tell me how to transport module pool objects(including screens) from sand dev to dev system rather than manually with in the same client.
regards,
prasad reddy.

Hi
Go to Screen painter and give your program name which you wanted to transport.
Go to --> Object directory entry and there enter Development class and press enter then it will ask for request,. create a request accordingly.
Then you can release the sub task and give the main request to your Basis person to move it to target system.
Regads
Suresh

Transports from none Unicode to Unicode system. Possible?

Hello,
is it possible to transports from none Unicode to Unicode system?
Any experience?
Any links?
Best regards.

Hi,
We ahve upgraded to unicode but never transporetd from non unicode to unicode...
Non unicode to unicode is ok but vice versa might be will not work.
reagrds
Gopal

Replicate datasource from SRM source system

Hi,
I need to replicate datasource from SRM source system I am able to see datasource under application component in RSA6 when I tried to replicate those component In BI by selecting Replicate Tree Metadata I am not able to see any application component in RSA1 .
Thanks,
Senthil

Hi Senthil,
i know your issue. the problem is when you are going to do replication in first time you dont find any application components.
so what you have to do is go to the BI SYSTEM and go to your SRM Source system and select and right click and select Replicate Datasources.
if you are doing first time replication it takes a quite long time.
so once its replicated then u will b able to see the datasources as well as the corresponding application components.
next time in SRM if you enhance the datasource you can directly select the datasource and right click say replicate metadata.
once solved get back to me
HOPE THIS HELPS YOU
regards
vadlamudi

Regarding transporting datasource from DEVB system to QA system

Similar Messages

Maybe you are looking for