Regarding updating data in the enhanced fields
Hi All,
I have enhanced one standard FI data source with a field. Now I have one doubt. We can do a full load and for subsequent loads, what should I do so that delta values are filled for the new appeneded field.
Regards
Jay Y
Hello JayanTh Y,
How r u ?
You have enhanced one FI Data Source with 1 field. Then
1. Replicate that Data Source and do the changes also in the InfoSource and the Data Targets
2. Schedule a Full Upload and load the data. Now, your new enhanced field's data will be updated in BW
3. Schedule again "Initialize without Data Transfer" and from now the delta update will be available and the values for the new enhanced field will be captured along with the delta.
Best Regards....
Sankar Kumar
+91 98403 47141
Similar Messages
-
Reg: Loading historic data for the enhanced field
Hello All,
We need to add a new field 0VENDOR to our datasource 0FI_GL_4. This field is available in our BSEG table. Hence, we are planning to go ahead with datasource enhancement.
Now, please advice on how to update the historical data to this newly added field.I have heard there is a BW functionality/program to do so without deleting the entire data. Kindly advice on the possible solutions.
Thanks & Regards
Sneha SanthanakrishnanHI Sneha,
Using remodeling option you will be able to do that, ie.. loading historical data for new attributes without deleting existing data. But the problem is in remodeling either you can assign constant or some other attribute value or values determined using EXIT.
Now when you are loading data from source system and if you need historical data as well the best practise is delete existing data and reload it from source sytsem.
But if you don't want to do that then I can give you one trick but not sure whether it will work or not. The idea is to populate the historical values for 0Vendor using customer exit option of remodeling. Now to get the historical values in customer exit you will need all that data in some BW table, here you can think of creating some generic extractor which will store the values of all the documents and the respective vendor, as you will load data form source system you will get historical values as well.
Now read that table in customer exit and populate vendor value. This will be one time process to populate the historical values.
Regards,
Durgesh. -
Update the data into the ZTABLE fields thru program logic ..?
hi all,
i have ZTABLE1,ZTABLE2,ZTABLE3, and this tables like ALV grids using object methods.
in the same table fields now i wanted to update the data into the ZTABLE fields thru program logic .
could anyone please help me ....
please provide if anyone of have any program logic that would be helpfull to me.
thanks in advance...
srinivas....Hi Srinivas,
The following statements are used to upload the data into custom tables.
1. Modify
2. Update
3. Insert
if you are using OO ALV, you should enable the 'SAVE' button in the main toolbar. if the user press the save button, then you should upload the data to the custom table.
please find the example code, in this example 'PERFORM F_SAVE_DATA'(here i gave the message only, you write your own logic here) is used to save the data in custom table.
Report Program: ZB_ALVOOPS_TEST
Line:-----
REPORT ZB_ALVOOPS_TEST MESSAGE-ID ZCR_MESSAGES.
Top Include - Global Data Declaration *
INCLUDE ZB_ALVOOPS_TEST_TOP.
SEL Include - Selection Screen *
INCLUDE ZB_ALVOOPS_TEST_SEL.
AT SELECTION SCREEN *
Initialization Event *
INITIALIZATION.
Initialize Screen Number.
PERFORM F_INITIALIZE.
Initialize Field Catalog for ALV Grid.
PERFORM F_INITIALIZE_GRID.
END-OF-SELECTION.
Call Display Screen *
CALL SCREEN 9000.
Event Handler - Class Definition and Implementation *
INCLUDE ZB_ALVOOPS_TEST_CL01.
PBO Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PBO.
PAI Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PAI.
Subroutine Include *
INCLUDE ZB_ALVOOPS_TEST_F01.
Include: ZB_ALVOOPS_TEST_TOP
Line:-------
Type Declaration For Internal Tables *
Collection Data
TYPES: BEGIN OF TY_MARA ,
MATNR TYPE MATNR , " Material
VPSTA TYPE VPSTA , " Maintenance status of complete material
MTART TYPE MTART , " Material Type
MBRSH TYPE MBRSH , " Industry Sector
MATKL TYPE MATKL , " Material Group
BISMT TYPE BISMT , " Old material number
MEINS TYPE MEINS , " Base Unit of Measure
BSTME TYPE BSTME , " Order unit
BRGEW TYPE BRGEW , " Gross weight
MAKTX TYPE MAKTX , " Material Description
ROWCOLOR TYPE CHAR4 , " Row Color
END OF TY_MARA .
Flag *
DATA: FG_REFRESH TYPE XFLD , " Used to Refresh ALV
FG_SAVE TYPE XFLD . " Data Saved Or Not.
Internal Table Declaration *
DATA: IT_MARA TYPE STANDARD TABLE OF TY_MARA , " Internal table for Material
WA_MARA TYPE TY_MARA . " Workarea for Material
Variable Declaration For General Constants *
CONSTANTS: C_SCREEN_SELECT TYPE SYDYNNR VALUE '9001' , " Selection Screen Number
C_SCREEN_SELECT_NIL TYPE SYDYNNR VALUE '9002' , " Empty Screen Number
C_STATUS9000 TYPE CHAR10 VALUE 'STATUS9000' , " PF-Status
C_TITLEBAR TYPE CHAR4 VALUE '9000' , " Title Bar
C_ISSUE_CONTAINER TYPE SCRFNAME VALUE 'WORKCONTAINER', " Container Name (Screen Painter)
C_BUTTON_TYPE TYPE CHAR1 VALUE '3' , " Button Type
C_EXECUTE TYPE CHAR4 VALUE 'SELE' , " Functions 'SELE' -> Execute
C_BACK TYPE CHAR4 VALUE 'BACK' , " Functions 'BACK' -> Back to main screen
C_ENTER TYPE CHAR5 VALUE 'ENTER' , " Functions 'ENTER' -> No Action
C_SEL01 TYPE CHAR5 VALUE 'SEL01' , " Functions 'SEL01' -> Toggle Function
C_SAVE TYPE CHAR4 VALUE 'SAVE' , " Functions 'SAVE' -> Save Function
C_REFRESH TYPE CHAR7 VALUE 'REFRESH' , " Functions 'REFRESH' -> Clear and Fres All objects
C_ADD_MI TYPE CHAR6 VALUE 'ADD_MI' , " Functions 'ADD_MI' -> Add New Media Issue
C_TRUE TYPE CHAR1 VALUE 'X' , " Set X value
C_REQUIRED TYPE CHAR1 VALUE '1' , " Un-Confirmed Qty field obligatory or not.
C_INPUT TYPE CHAR1 VALUE '0' , " Reason field should not be input.
C_ALV_SAVE TYPE CHAR1 VALUE 'A' , " ALV
C_ERROR TYPE CHAR1 VALUE 'E' , " Error Type
C_SIGN TYPE CHAR1 VALUE 'I' , " Sign
C_OPTION TYPE CHAR2 VALUE 'EQ' , " Option.
C_COMMIT_WAIT TYPE CHAR1 VALUE '5' , " Waiting to update in DB
C_TABNAME TYPE CHAR1 VALUE '1' , " Parameter (ALV)
C_CANCEL TYPE CHAR1 VALUE 'N' , " Cancel
C_YES TYPE CHAR1 VALUE 'J' . " Yes.
Variable Declaration For Container and ALV Grid *
DATA: OBJ_CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER , " Container Class
OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID . " ALV Grid Class
Field Catalog Declaration For Container and ALV Grid *
DATA: IT_FIELDCAT TYPE LVC_T_FCAT , " Field Catalog
IT_EXCLUDE TYPE UI_FUNCTIONS , " Standard Function Exclude from ALV
WA_FIELDCAT TYPE LVC_S_FCAT , " For Field Catalog
WA_LAYOUT TYPE LVC_S_LAYO . " ALV Layout
Global Variable Declaration *
DATA: OK_CODE TYPE SY-UCOMM , " OK CODE ( Screen Attribute Don't Change the var.name)
G_SAVE_CODE TYPE SY-UCOMM , " OK CODE
G_ANSWER TYPE CHAR1 , " OK or Cancel.
G_SELECTION_DYNNR TYPE SYDYNNR , " Screen Number
G_ERROR_TEXT TYPE CHAR128 , " Error Text
G_SELECTION_TOGGLE_TEXT TYPE CHAR50 , " Toggle Text, Value: Hide Selection, Show Selection
G_MATNR TYPE MATNR , " Material
G_SMATNR TYPE MATNR , " Material
G_SMTART TYPE MTART . " Material Type
Include: ZB_ALVOOPS_TEST_SEL
Line:-------
Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 9001 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_MATNR FOR G_SMATNR , " Material
S_MTART FOR G_SMTART . " Material Type
SELECTION-SCREEN END OF BLOCK SELECTION .
SELECTION-SCREEN END OF SCREEN 9001 .
Empty Selection
SELECTION-SCREEN BEGIN OF SCREEN 9002 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION_NIL WITH FRAME TITLE TEXT-002 .
Nil
SELECTION-SCREEN END OF BLOCK SELECTION_NIL .
SELECTION-SCREEN END OF SCREEN 9002 .
Include: ZB_ALVOOPS_TEST_CL01
Line:-------
CLASS lcl_event_handler DEFINITION *
Event Handler Class Definition *
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLER_TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
IMPORTING E_OBJECT E_INTERACTIVE ,
HANDLER_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
IMPORTING E_UCOMM .
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION *
Event Class Implementation. *
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
Toolbar -----Create 'Add Issue' button
METHOD HANDLER_TOOLBAR.
DATA: L_WA_TOOLBAR TYPE STB_BUTTON. " Toolbar
CLEAR: L_WA_TOOLBAR.
Button Type
L_WA_TOOLBAR-BUTN_TYPE = C_BUTTON_TYPE . " 3.
APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
Add Issue Button.
CLEAR: L_WA_TOOLBAR.
L_WA_TOOLBAR-FUNCTION = 'ADD_MI' . " 'ADD_MI' .
L_WA_TOOLBAR-ICON = 'ICON_CREATE'.
L_WA_TOOLBAR-QUICKINFO = 'CREATE' . " 'Add Issue'.
L_WA_TOOLBAR-TEXT = 'CREATE' . " 'Add Issue'.
L_WA_TOOLBAR-DISABLED = ''.
APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
CLEAR: L_WA_TOOLBAR.
ENDMETHOD. "handler_toolbar
User Actions Events-- Handle 'Add Issue' Button Click.
METHOD HANDLER_USER_COMMAND.
CASE E_UCOMM.
Add Issue Button.
WHEN C_ADD_MI.
IF NOT G_MATNR IS INITIAL.
FG_REFRESH = C_TRUE.
PERFORM F_ADD_MEDIAISSUE.
ENDIF.
ENDCASE.
Refresh Control
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
Handle Exceptions
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
G_ERROR_TEXT = TEXT-026. " 'Control System Error'.
WHEN 2.
G_ERROR_TEXT = TEXT-027. " 'Control CL_GUI_CFW Has Raised Error'.
ENDCASE.
MESSAGE G_ERROR_TEXT TYPE 'E'.
ENDIF.
Refresh Alv Grid.
PERFORM F_REFRESH_GRID.
ENDMETHOD. "handler_user_command
ENDCLASS. "lcl_event_handler IMPLEMENTATION
Object Ref. Event Class.
DATA: OBJ_EVENT_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Include: ZB_ALVOOPS_TEST_PBO
Line:----
Module STATUS_9000 OUTPUT *
Set PF-Status *
MODULE STATUS_9000 OUTPUT.
PF Status
SET PF-STATUS C_STATUS9000 .
SET TITLEBAR C_TITLEBAR .
ENDMODULE. " STATUS_9000 OUTPUT
Module Create_Alvgrid OUTPUT *
Create Or Refresh ALV Grid *
MODULE CREATE_ALVGRID OUTPUT.
PERFORM F_PROCESS_ALV .
PERFORM F_REFRESH_GRID.
ENDMODULE. " create_alvgrid OUTPUT
Include: ZB_ALVOOPS_TEST_PAI
Line:----
Module exit_command INPUT *
Exit Command ( Cancel and Exit ) *
MODULE EXIT_COMMAND INPUT.
LEAVE PROGRAM.
ENDMODULE. " exit_command INPUT
Module user_command_9000 INPUT *
User Command - Process toolbar Events *
MODULE USER_COMMAND_9000 INPUT.
Take an Action based on user Input
G_SAVE_CODE = OK_CODE.
CLEAR OK_CODE.
CASE G_SAVE_CODE.
Back
WHEN C_BACK .
Raise the Confirmation Message When User not saved the data.
IF FG_SAVE = C_YES.
PERFORM F_EXITCHECK CHANGING G_ANSWER .
IF G_ANSWER = C_YES.
PERFORM F_SAVE_DATA.
ELSE.
CLEAR G_SAVE_CODE.
ENDIF.
CLEAR: FG_SAVE.
ENDIF.
LEAVE PROGRAM.
Enter
WHEN C_ENTER.
Execute ( F8 )
WHEN C_EXECUTE .
IF IT_MARA IS INITIAL.
PERFORM F_SELECTMATERIAL.
ENDIF.
Toggle Button
WHEN C_SEL01.
PERFORM F_TOGGLE_SELECTION_SCREEN. " USING ok_code.
SAVE ( CTRL+S )
WHEN C_SAVE.
IF NOT G_MATNR IS INITIAL.
PERFORM F_SAVE_DATA.
CLEAR: G_MATNR.
ENDIF.
New Entry ( CTRL+F1 )
WHEN C_REFRESH.
PERFORM F_REFRESH_DATA.
ENDCASE.
ENDMODULE. " user_command_9000 INPUT
Include: ZB_ALVOOPS_TEST_F01
Line:----
Form f_toggle_selection_screen *
Toggle Function - Hide Selection / Show Selection *
FORM F_TOGGLE_SELECTION_SCREEN.
Toggle Function
IF G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_DYNNR = C_SCREEN_SELECT_NIL.
G_SELECTION_TOGGLE_TEXT = TEXT-902.
ELSE.
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDIF.
ENDFORM. " f_toggle_selection_screen
Form f_initialize
Initialize Screen Number and Text
FORM F_INITIALIZE .
Initialize Screen Number
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDFORM. "f_initialize
Form f_selectmaterial *
FORM F_SELECTMATERIAL .
Select the data from Mara Table
SELECT A~MATNR
A~VPSTA
A~MTART
A~MBRSH
A~MATKL
A~BISMT
A~MEINS
A~BSTME
A~BRGEW
B~MAKTX
INTO TABLE IT_MARA
FROM MARA AS A INNER JOIN MAKT AS B ON AMATNR = BMATNR
WHERE A~MATNR IN S_MATNR
AND A~MTART IN S_MTART
AND B~SPRAS = 'EN'.
IF SY-SUBRC = 0.
FG_REFRESH = C_TRUE.
FG_SAVE = C_YES .
G_MATNR = C_TRUE.
LOOP AT IT_MARA INTO WA_MARA WHERE BRGEW >= 200.
WA_MARA-ROWCOLOR = 'C310'.
MODIFY IT_MARA FROM WA_MARA.
ENDLOOP.
ELSE.
MESSAGE 'No data Found' TYPE 'E'.
ENDIF.
ENDFORM. " f_selectmaterial
Form f_initialize_grid *
Initialize Field Catalog. *
FORM F_INITIALIZE_GRID .
field catalog
PERFORM F_ATTRFCAT USING :
'MATNR' '1' '0' TEXT-005 '15' '0' 'X' ' ' ' ',
'VPSTA' '1' '1' TEXT-006 '15' '0' 'X' ' ' ' ',
'MTART' '1' '2' TEXT-007 '15' '0' ' ' ' ' ' ',
'MBRSH' '1' '3' TEXT-008 '15' '0' ' ' ' ' ' ',
'MATKL' '1' '4' TEXT-009 '15' '0' ' ' 'X' ' ',
'BISMT' '1' '5' TEXT-010 '15' '0' ' ' ' ' ' ',
'MEINS' '1' '6' TEXT-011 '15' '0' ' ' ' ' ' ',
'BSTME' '1' '7' TEXT-012 '15' '0' ' ' ' ' ' ',
'MAKTX' '1' '8' TEXT-013 '15' '0' ' ' ' ' 'C711',
'BRGEW' '1' '9' TEXT-014 '15' '0' ' ' ' ' ' '.
Set Editable Fields in ALV.
PERFORM F_SETEDIT_FIELDS CHANGING IT_FIELDCAT.
ENDFORM. "f_initialize_grid
Form f_setedit_fields *
Set Editable Fields in ALV *
C_IT_FIELDCAT <-- Field Catalog *
FORM F_SETEDIT_FIELDS CHANGING C_IT_FIELDCAT TYPE LVC_T_FCAT.
Local Variable Declaration.
DATA: LS_FIELDCAT LIKE LINE OF C_IT_FIELDCAT. " Field Catalog
Create Editable Fields.
LOOP AT C_IT_FIELDCAT INTO LS_FIELDCAT.
CASE LS_FIELDCAT-FIELDNAME.
WHEN 'BRGEW'.
LS_FIELDCAT-EDIT = C_TRUE.
WHEN 'MAKTX'.
LS_FIELDCAT-EDIT = C_TRUE.
ENDCASE.
MODIFY C_IT_FIELDCAT FROM LS_FIELDCAT.
ENDLOOP.
ENDFORM. " f_setedit_fields
Form f_attrfcat *
Update Field Catalog Internal Table *
U_FIELDNAME --> Field Name *
U_ROW_POS --> Row Position *
U_COL_POS --> Column Position *
U_SELTEXT_L --> Display Column Heading *
U_OUTPUTLEN --> Heading Output Length *
U_DECIMALS_OUT --> Number of decimal places in output *
U_KEY --> Key in ALV Display *
U_FIX --> Existence of fixed values *
FORM F_ATTRFCAT USING
U_FIELDNAME TYPE SLIS_FIELDNAME
U_ROW_POS TYPE SYCUROW
U_COL_POS TYPE SYCUCOL
U_SELTEXT_L TYPE SCRTEXT_L
U_OUTPUTLEN TYPE OUTPUTLEN
U_DECIMALS_OUT TYPE CHAR1
U_KEY TYPE CHAR1
U_FIX TYPE VALEXI
U_COL_COLOR TYPE LVC_EMPHSZ.
Update field catalog.
WA_FIELDCAT-FIELDNAME = U_FIELDNAME.
WA_FIELDCAT-ROW_POS = U_ROW_POS.
WA_FIELDCAT-COL_POS = U_COL_POS.
WA_FIELDCAT-COLTEXT = U_SELTEXT_L.
WA_FIELDCAT-SELTEXT = U_SELTEXT_L.
WA_FIELDCAT-OUTPUTLEN = U_OUTPUTLEN.
WA_FIELDCAT-DECIMALS_O = U_DECIMALS_OUT.
WA_FIELDCAT-KEY = U_KEY.
WA_FIELDCAT-VALEXI = U_FIX.
WA_FIELDCAT-EMPHASIZE = U_COL_COLOR.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "ATTR_FCAT
Form f_refresh_data *
Clear All the objects used in the program ( Data Related ) *
FORM F_REFRESH_DATA .
Clear All the Objects Used in Our Program.
CLEAR: S_MATNR ,
S_MTART ,
IT_MARA ,
OK_CODE ,
FG_REFRESH ,
FG_SAVE ,
G_SAVE_CODE ,
G_MATNR .
FREE: S_MATNR ,
S_MTART ,
IT_MARA ,
OK_CODE ,
FG_REFRESH ,
FG_SAVE ,
G_SAVE_CODE ,
G_MATNR .
Refresh Alv.
FG_REFRESH = C_TRUE.
ENDFORM. " f_refresh_data
Form f_process_alv *
1. Create Custom Container *
2. Create ALV Grid *
3. Exclude Standard Functions *
4. Display the ALV *
5. Register the Events. *
FORM F_PROCESS_ALV .
Display ALV
Custom Container
IF OBJ_CUST_CONTAINER IS INITIAL.
CREATE OBJECT OBJ_CUST_CONTAINER
EXPORTING
CONTAINER_NAME = C_ISSUE_CONTAINER.
ALV Grid
IF OBJ_CUST_GRID IS INITIAL.
CREATE OBJECT OBJ_CUST_GRID
EXPORTING
I_PARENT = OBJ_CUST_CONTAINER.
ENDIF.
Exclude Standard Functions
PERFORM F_EXCLUDETOOLBAR USING OBJ_CUST_GRID
CHANGING IT_EXCLUDE.
Layout.
WA_LAYOUT-CWIDTH_OPT = C_TRUE.
WA_LAYOUT-INFO_FNAME = 'ROWCOLOR'.
ALV Grid Display
CALL METHOD OBJ_CUST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = WA_LAYOUT
IT_TOOLBAR_EXCLUDING = IT_EXCLUDE
I_SAVE = C_ALV_SAVE
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT[]
IT_OUTTAB = IT_MARA.
ENDIF.
Register Editable ALV Events
CALL METHOD OBJ_CUST_GRID->REGISTER_EDIT_EVENT
EXPORTING
I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED
EXCEPTIONS
ERROR = 1
OTHERS = 2.
*Create Object for Custom Event Handler Class if the ref. object is
*initial.
IF OBJ_EVENT_HANDLER IS INITIAL.
CREATE OBJECT OBJ_EVENT_HANDLER.
ENDIF.
Register Events
SET HANDLER: OBJ_EVENT_HANDLER->HANDLER_TOOLBAR FOR
OBJ_CUST_GRID,
OBJ_EVENT_HANDLER->HANDLER_USER_COMMAND FOR
OBJ_CUST_GRID.
Set Toolbar
CALL METHOD OBJ_CUST_GRID->SET_TOOLBAR_INTERACTIVE.
ENDFORM. " f_process_alv
Form f_excludetoolbar *
Exclude Standard Functions from ALV *
U_OBJ_CUST_GRID --> Instant for CL_GUI_ALV_GRID *
C_IT_EXCLUDE <-- Internal table for Exclude *
FORM F_EXCLUDETOOLBAR USING U_OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID
CHANGING C_IT_EXCLUDE TYPE UI_FUNCTIONS.
Exclude Standard Functions
CLEAR: C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_CHECK TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_REFRESH TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_CUT TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_DELETE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_APPEND_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_INSERT_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_MOVE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE_NEW_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_UNDO TO C_IT_EXCLUDE.
ENDFORM. " f_excludetoolbar
Form f_create_returnrequest *
Create Return Request based on the Work container ( ALV Grid Data) *
FORM F_CREATE_RETURNREQUEST.
Message to save
ENDFORM. " f_create_returnrequest
Form f_add_mediaissue *
Create New Media Issue if the user click 'ADD ISSUE' Button. *
1. Get the Input From User *
2. Get Total Delivery and Return Quantity *
3. Append to Final internal table *
FORM F_ADD_MEDIAISSUE .
Local Variable Declaration.
MESSAGE 'Add Button Clicked' TYPE 'I'.
ENDFORM. " f_add_mediaissue
Form f_refresh_grid *
Refresh ALV Grid *
FORM F_REFRESH_GRID .
Refresh ALV Grid.
IF FG_REFRESH IS NOT INITIAL.
CALL METHOD OBJ_CUST_GRID->REFRESH_TABLE_DISPLAY.
CLEAR: FG_REFRESH.
ENDIF.
ENDFORM. " f_refresh_grid
Form f_getcollectissue *
FORM F_GETCOLLECTISSUE .
Collection Plan Data
ENDFORM. " f_getcollectissue
Form f_perpare_final *
FORM F_PERPARE_FINAL .
Perpare Final Internal table
ENDFORM. " f_perpare_final
Form f_validate_data *
FORM F_VALIDATE_DATA.
Message if any data validation.
ENDFORM. " f_validate_data
Form f_modify_final *
Update Actual Delivery Qty and Return Qty in Final Internal table *
Form f_save_data *
Save the Data When User Click 'Save' Button *
FORM F_SAVE_DATA .
Message
MESSAGE 'Save Button Clicked' TYPE 'I'.
ENDFORM. "f_save_data
Form f_exitcheck *
When User Exit from the Transaction then Raise Confirmation message*
C_ANSWER <-- OK or Cancel. *
FORM F_EXITCHECK CHANGING C_ANSWER TYPE CHAR1.
Security Check.
C_ANSWER = C_CANCEL.
CALL FUNCTION 'POPUP_TO_CONFIRM_DATA_LOSS'
EXPORTING
TITEL = TEXT-039
IMPORTING
ANSWER = C_ANSWER.
ENDFORM. "f_exitcheck
Screen Numer : 9000
Line:------
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
CALL SUBSCREEN: SELECTIONSCREEN INCLUDING SY-CPROG G_SELECTION_DYNNR.
MODULE CREATE_ALVGRID.
PROCESS AFTER INPUT.
MODULE EXIT_COMMAND AT EXIT-COMMAND.
CALL SUBSCREEN: SELECTIONSCREEN.
MODULE USER_COMMAND_9000.
pls reward if it is useful -
Set up table contains the enhanced field information?
Hi Experts,
I am enhancing a field in the datasource 2lis_11_vaitm,
Things i did :
1.Enhanced the ext.structure with the required field.
2.Activated the ext.structure.
3.Witten the logic in the CMOD.
4. Deleted the Setup table and refilled.
Now my question is :
1.Did the setup table contains the ENHANCED FIELD with the historical data ?if so where to see that?
I checked in RSA3 the enhanced field is displayed with the records.
The code i have wriiten is WHEN "DATASOURCE " then -> logic from the base table.
Now will the data come from the base table or from the setup table?
Can any one help me in this issue.
Best Regards
JelinaWhy do we need to delete the setup table after doing enchancement with standard Datasource.
Ans :
You neednot refill the setup table just because you enhanced the datasource.
You need to delete and refill if the postings happened after you filled the setup table.
Meaning you will miss the current posting.Unless you have done a init in BI/BW side.
Hope this helps. -
Updating data in the database table
Can any help me in the code for updating data in the database table.
Regards,
RahulHi Rahul,
A slightly longer procedure that i'm adding here...
1.) Create the component (i'm sure you have this covered)
2.) Next on the button click that updates the database - add an action.
3.) double click the action so that you are taken to the methods section of the view.
4.) next you need to add the code that is required the update the database - this will be in the form of the above two posts.
5.) compile and test the application
Let me know in case you need further information on how to do this with a function module or something.
Thanks. -
Is there any way to print the data inside the Notes field of MIR6 Report
Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.
-
How to update data in the database through ALV grid
Hi All,
I diplayed an ALV grid with five fields in a classical report. I have already set the fieldcat for one field as wa_fcat_edit = 'X'. I am able to edit(modify) the data in that field. But I want to update the data into the database which is modified by me in that field. Can I update the data using BDC or any other procedure?
This is an urgent require ment for me. Please help me ASAP.
Thanks & Regards,
Ramesh.Hi
Please go through the link.
Link: [http://www.****************/Tutorials/ALV/Edit/demo.htm]
regards
ravisankar -
Regarding Updation of Custom info type fields
Hi All,
I am new to HR ABAP. Actually, I want to update the custom infotype 3 fields as per my user inputs. I am fetching the data from the PA table acoording to sy-datum falling in the begda, enda limitations. now I am changing the field with new values in the work area. And pass with the following data to the FM.
But I am getting the error 'No data stored for 9008 in the selected period'. I had seen prvious therads, but could not get how they solved the issue.
Please provide the inpus for the following code. I had also passed the validity start and end.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9008'
number = pernr
SUBTYPE =
OBJECTID =
LOCKINDICATOR =
VALIDITYEND =
VALIDITYBEGIN =
RECORDNUMBER =
record = wa_pa9008
operation = 'MOD'
TCLAS = 'A'
DIALOG_MODE = '0'
NOCOMMIT =
VIEW_IDENTIFIER =
SECONDARY_RECORD =
IMPORTING
return = l_bapireturn
key = bapipakey_tab
Regards,
Brijesh PatelCan anyone please provide inputs on this???
-
Loading Historical data to the new field without deleting the data in cube
Dear BI Experts,
I have enhanced a new field to the Generic data source in BI 7.0 .
I need to load historical data to the newly appended field.
As we are having very huge data it is not possible to delete and do init again.
Is there any other possibility to load the historical data for the new appeneded field without deleting the old requests?
Thanks for your Kind help.
Kind Regards,
SunilDear Sushant,
Thanks for your reply.
But I am just wondeing if there is any possibility of loading historical data for new field using Remodelling concept
with out deleting old requests.
I do not know about Remodelling conept but heard that it is not recommeneded to use.
Can you please suggest and help.
Thanks and Regards,
Sunil Kotne -
Cannot update delivery attributes: the following field(s) are not updatable
Hi. I create in EBS simple Order
Now , my goal is to create a delivery , pick , change shipping quantity and ship confirm. Here is my code
DECLARE
p_sales_order NUMBER := 10014445;
p_line_number NUMBER := 1.1;
p_org_id NUMBER := 308;
l_shipped_quantity NUMBER := 5;
p_api_version_number NUMBER := 1.0;
init_msg_list VARCHAR2(200);
l_commit VARCHAR2(30);
x_msg_details VARCHAR2(3000);
x_msg_summary VARCHAR2(3000);
x_return_status VARCHAR2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(3000);
p_validation_level NUMBER;
v_errbuf VARCHAR2(2000);
v_retcode VARCHAR2(20);
v_released_status wsh_delivery_details.released_status%TYPE;
v_inv_interfaced_flag wsh_delivery_details.inv_interfaced_flag%TYPE;
v_oe_interfaced_flag wsh_delivery_details.oe_interfaced_flag%TYPE;
v_source_code wsh_delivery_details.source_code%TYPE;
v_pending_interface_flag wsh_trip_stops.pending_interface_flag%TYPE;
l_changed_attributes wsh_delivery_details_pub.changedattributetabtype;
l_source_code VARCHAR2(30) := 'OE';
-- Parameters for WSH_DELIVERIES_PUB
p_delivery_name VARCHAR2(30);
p_action_code VARCHAR2(15);
p_asg_trip_id NUMBER;
p_asg_trip_name VARCHAR2(30);
p_asg_pickup_stop_id NUMBER;
p_asg_pickup_loc_id NUMBER;
p_asg_pickup_loc_code VARCHAR2(30);
p_asg_pickup_arr_date DATE;
p_asg_pickup_dep_date DATE;
p_asg_dropoff_stop_id NUMBER;
p_asg_dropoff_loc_id NUMBER;
p_asg_dropoff_loc_code VARCHAR2(30);
p_asg_dropoff_arr_date DATE;
p_asg_dropoff_dep_date DATE;
p_sc_action_flag VARCHAR2(10);
p_sc_intransit_flag VARCHAR2(10);
p_sc_close_trip_flag VARCHAR2(10);
p_sc_create_bol_flag VARCHAR2(10);
p_sc_stage_del_flag VARCHAR2(10);
p_sc_trip_ship_method VARCHAR2(30);
p_sc_actual_dep_date VARCHAR2(30);
p_sc_report_set_id NUMBER;
p_sc_report_set_name VARCHAR2(60);
p_sc_defer_interface_flag VARCHAR2(60);
p_sc_send_945_flag VARCHAR2(60);
p_sc_rule_id NUMBER;
p_sc_rule_name VARCHAR2(60);
p_wv_override_flag VARCHAR2(10);
p_asg_pickup_stop_seq NUMBER;
p_asg_dropoff_stop_seq NUMBER;
x_trip_id VARCHAR2(30);
x_trip_name VARCHAR2(30);
fail_api EXCEPTION;
x_debug_file VARCHAR2(100);
l_ship_method_code VARCHAR2(100);
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
CURSOR c_ord_details IS
SELECT DISTINCT det.source_header_number sales_order,
det.org_id,
det.source_line_number,
det.source_header_id,
det.source_line_id,
det.source_header_type_name,
det.inventory_item_id,
det.requested_quantity,
det.delivery_detail_id,
(SELECT concatenated_segments
FROM mtl_system_items_kfv
WHERE inventory_item_id = det.inventory_item_id
AND organization_id = det.organization_id) ordered_item,
det.organization_id,
det.src_requested_quantity,
det.shipped_quantity,
del.delivery_id,
del.status_code delivery_status_code,
det.released_status pick_release_status,
det.oe_interfaced_flag,
det.inv_interfaced_flag
FROM wsh_delivery_details det,
wsh_delivery_assignments asn,
wsh_new_deliveries del
WHERE 1 = 1
AND det.delivery_detail_id = asn.delivery_detail_id
AND asn.delivery_id = del.delivery_id(+)
AND det.source_header_number = 1199656
AND det.source_line_number = '1.1'
AND det.org_id = 10102
AND shipped_quantity IS NULL
AND NVL(del.status_code, 'OP') <> 'CL'
and det.delivery_detail_id =21439836
/* AND det.released_status = 'Y'*/;
BEGIN
-- Initializing the Applications
SELECT user_id INTO l_user_id FROM fnd_user WHERE user_name = 'MSHAPIRA';
SELECT responsibility_id, application_id
INTO l_resp_id, l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'OM Super User - UDS UK';
fnd_global.apps_initialize(l_user_id, l_resp_id, l_appl_id);
FOR i IN c_ord_details LOOP
DBMS_OUTPUT.put_line('Initializing the Application for Shipping Transactions');
-- Mandatory initialization for R12
mo_global.set_policy_context('S', i.org_id);
mo_global.init;
-- Ship Confirming
p_delivery_name := TO_CHAR(i.delivery_id);
DBMS_OUTPUT.put_line('Before Shipping, Calling WSH_DELIVERY_DETAILS_PUB API to Update Shipping Attributes');
DBMS_OUTPUT.put_line('=============================================');
l_changed_attributes(1).delivery_detail_id := i.delivery_detail_id;
l_changed_attributes(1).shipped_quantity := 5;
wsh_delivery_details_pub.update_shipping_attributes(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
p_commit => l_commit,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_changed_attributes => l_changed_attributes,
p_source_code => l_source_code);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
RAISE fail_api;
DBMS_OUTPUT.put_line('Failed to Update the Shipping Attributes');
ELSE
DBMS_OUTPUT.put_line('Successfully Updated the Shipping Attributes');
END IF;
BEGIN
SELECT shipping_method_code
INTO l_ship_method_code
FROM oe_order_headers_all
WHERE order_number = i.sales_order
AND org_id = i.org_id;
EXCEPTION
WHEN OTHERS THEN
l_ship_method_code := NULL;
END;
p_action_code := 'CONFIRM'; -- The action code for ship confirm
p_sc_action_flag := 'S'; -- Ship entered quantity.
p_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
p_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
p_sc_trip_ship_method := l_ship_method_code; -- The ship method code
p_sc_defer_interface_flag := 'Y';
p_sc_stage_del_flag := 'Y';
p_sc_create_bol_flag := 'N';
p_wv_override_flag := 'N';
-- API Call for Ship Confirmation
DBMS_OUTPUT.put_line('Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
DBMS_OUTPUT.put_line('=============================================');
wsh_deliveries_pub.delivery_action(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_action_code => p_action_code,
p_delivery_id => i.delivery_id,
p_delivery_name => p_delivery_name,
p_asg_trip_id => p_asg_trip_id,
p_asg_trip_name => p_asg_trip_name,
p_asg_pickup_stop_id => p_asg_pickup_stop_id,
p_asg_pickup_loc_id => p_asg_pickup_loc_id,
p_asg_pickup_stop_seq => p_asg_pickup_stop_seq,
p_asg_pickup_loc_code => p_asg_pickup_loc_code,
p_asg_pickup_arr_date => p_asg_pickup_arr_date,
p_asg_pickup_dep_date => p_asg_pickup_dep_date,
p_asg_dropoff_stop_id => p_asg_dropoff_stop_id,
p_asg_dropoff_loc_id => p_asg_dropoff_loc_id,
p_asg_dropoff_stop_seq => p_asg_dropoff_stop_seq,
p_asg_dropoff_loc_code => p_asg_dropoff_loc_code,
p_asg_dropoff_arr_date => p_asg_dropoff_arr_date,
p_asg_dropoff_dep_date => p_asg_dropoff_dep_date,
p_sc_action_flag => p_sc_action_flag,
p_sc_intransit_flag => p_sc_intransit_flag,
p_sc_close_trip_flag => p_sc_close_trip_flag,
p_sc_create_bol_flag => p_sc_create_bol_flag,
p_sc_stage_del_flag => p_sc_stage_del_flag,
p_sc_trip_ship_method => p_sc_trip_ship_method,
p_sc_actual_dep_date => p_sc_actual_dep_date,
p_sc_report_set_id => p_sc_report_set_id,
p_sc_report_set_name => p_sc_report_set_name,
p_sc_defer_interface_flag => p_sc_defer_interface_flag,
p_sc_send_945_flag => p_sc_send_945_flag,
p_sc_rule_id => p_sc_rule_id,
p_sc_rule_name => p_sc_rule_name,
p_wv_override_flag => p_wv_override_flag,
x_trip_id => x_trip_id,
x_trip_name => x_trip_name);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
DBMS_OUTPUT.put_line('Ship confirm has not been Completed For SO => ');
ROLLBACK;
RAISE fail_api;
ELSE
DBMS_OUTPUT.put_line('Ship confirm Successfully Completed For SO => ');
COMMIT;
DBMS_OUTPUT.put_line('Checking the Delivery Status after delivery action API Call');
DBMS_OUTPUT.put_line('==========================================');
SELECT wdd.source_code,
wdd.released_status,
wdd.inv_interfaced_flag,
wdd.oe_interfaced_flag,
wts.pending_interface_flag
INTO v_source_code,
v_released_status,
v_inv_interfaced_flag,
v_oe_interfaced_flag,
v_pending_interface_flag
FROM wsh_trips wtr,
wsh_trip_stops wts,
wsh_delivery_legs wlg,
wsh_new_deliveries wnd,
wsh_delivery_assignments wda,
wsh_delivery_details wdd
WHERE wtr.trip_id = wts.trip_id
AND wts.stop_id = wlg.pick_up_stop_id
AND wts.pending_interface_flag = 'Y'
AND wdd.inv_interfaced_flag <> 'Y'
AND wlg.delivery_id = wnd.delivery_id
AND wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id = wdd.delivery_detail_id
AND wnd.delivery_id = p_delivery_name
AND wdd.source_line_id = i.source_line_id;
IF (v_source_code = 'OE' AND v_released_status = 'C' AND
v_inv_interfaced_flag <> 'Y' AND v_oe_interfaced_flag <> 'Y' AND
v_pending_interface_flag = 'Y') THEN
DBMS_OUTPUT.put_line('The Delivery has been Shipped & the Next Step is - Run Interface');
DBMS_OUTPUT.put_line('===========================================');
-- API Call for Submitting Interface Trip Stop
wsh_ship_confirm_actions.interface_all_wrp(errbuf => v_errbuf,
retcode => v_retcode,
p_mode => 'ALL',
p_stop_id => NULL,
p_delivery_id => p_delivery_name,
p_log_level => 0,
p_batch_id => NULL,
p_trip_type => NULL,
p_organization_id => i.organization_id,
p_num_requests => 1,
p_stops_per_batch => 1);
ELSE
DBMS_OUTPUT.put_line('The Delivery has not Shipped Properly');
END IF;
END IF;
END LOOP;
EXCEPTION
WHEN fail_api THEN
DBMS_OUTPUT.put_line('==============');
DBMS_OUTPUT.put_line('Error Details If Any');
DBMS_OUTPUT.put_line('==============');
wsh_util_core.get_messages(p_init_msg_list => 'Y',
x_summary => x_msg_summary,
x_details => x_msg_details,
x_count => x_msg_count);
IF x_msg_count > 1 THEN
x_msg_data := x_msg_summary ||' '||x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
ELSE
x_msg_data := x_msg_summary||' '|| x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
END IF;
END;
But at the stage of updating delivery attributes I get the following error message
Warning: For Delivery Detail 21439836, the following field(s) are not updatable: SHIPPED_QUANTITY.
Why?Hi Paul
Looks like the authorisation is failing due to a bad registration for some reason.
Would you be kind enough to clear out the registration to ensure we are dealing with a fresh start and no information is being used which may have become corrupt. You may do this by following this procedure;
Remove existing reg details
# usr/lib/cc-ccr/bin/eraseCCRRepository
List /tmp/RegistrationProfile.properties file
# cat /tmp/RegistrationProfile.properties
Attempt re-registration
# sconadm register -a -r /tmp/RegistrationProfile.properties
Send us the full output of the commands above if you would please. -
Read Data from the dynamic Field Symbol with key ?
Dear All,
I've 2 dynamic internal tables in the form of field symbols.
Now,I want to loop the item field symbol, read the header field symbol content and then move the corresponding into a final field symbol.
How to read the field symbol with key ?
When I'm trying to give the key clause in the paranthesis it's giving a syntax error.
Any clues ?
FYI .....
* Get the Dynamic Field and Value for the Date/Year and convert it into Year value
LOOP AT <fs_t_son> ASSIGNING <wa_son>.
ASSIGN COMPONENT gwa_znrows_def-fieldname OF STRUCTURE <wa_son> TO <fs_year>.
IF sy-subrc = 0.
CLEAR gv_string.
MOVE <fs_year> TO gv_string.
CLEAR gv_year.
gv_year = gv_string.
<fs_year> = gv_year.
ELSE.
* When the Date/year Field is not in the Table then -->
* Get the Dynamic Field and Value
ASSIGN COMPONENT gwa_znrows_def-kfldname OF STRUCTURE <wa_rson> TO <fs_value>.
* Populate field for Dynamic Where condition
CLEAR gv_value.
CONCATENATE '''' <fs_value> '''' INTO gv_value.
CONCATENATE gwa_znrows_def-kfldname '=' gv_value INTO gt_where SEPARATED BY space.
APPEND gt_where.
CLEAR gt_where.
READ TABLE <fs_t_rson> ASSIGNING <wa_rson> ( gt_where ). "Key clause
ENDIF. " if sy-subrc = 0. "Assign
ENDLOOP.
Thanks & regards,
Deepu.KTYPES: BEGIN OF line,
col1 TYPE c,
col2 TYPE c,
END OF line.
DATA: wa TYPE line,
itab TYPE HASHED TABLE OF line WITH UNIQUE KEY col1,
key(4) TYPE c VALUE 'COL1'.
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
ASSIGN itab TO <fs>.
READ TABLE <fs> WITH TABLE KEY (key) = 'X' INTO wa.
The internal table itab is assigned to the generic field symbol <fs>, after which it is possible to address the table key of the field symbol dynamically. However, the static address
READ TABLE <fs> WITH TABLE KEY col1 = 'X' INTO wa.
is not possible syntactically, since the field symbol does not adopt the key of table itab until runtime. In the program, the type specification ANY TABLE only indicates that <fs> is a table. If the type had been ANY (or no type had been specified at all), even the specific internal table statement READ TABLE <fs> would not have been possible from a syntax point of view. -
Regarding updating data into ztable
hi all,
When i am updating data into ztable .
Old record is deleted and new record is created
What will be the problem.
Please suggest.
Regards
RamiHi,
pz use ur syntax this way.
UPDATE zo9_user_status
SET sub_date = sy-datum
sub_time = sy-uzeit
status = g_wa_outtab-status
WHERE representative = g_wa_outtab-representative AND
selection_id = g_wa_outtab-selection_id AND
sub_date = g_wa_outtab-sub_date AND
sub_time = g_wa_outtab-sub_time AND
superior = g_wa_outtab-superior.
IF sy-subrc EQ 0.
COMMIT WORK.
l_error = 'X1'.
ELSE.
l_error = 'X2'.
CLEAR l_error.
ROLLBACK WORK.
ENDIF.
hope this helps.
thanx. -
How to upload the data for the z fields for the delta upload
Hi Exports,
I have the Z fields for the data sourse 2LIS_05_Q0ITEM. when doing any changes in the R3 system,the changes for the Zfileds are not uploded through delta upload.
Anybody plese suggest me to upload the changes.
Thanks,
KrishnaHi krishna,
see....have u activated that DATA SOURCE or not? if not activate that DATA SOURCE and have u written any code to that Zfields in RSAP0001?
Regards
chandra sekhar
Edited by: chandra sekhar on Nov 11, 2008 12:47 PM -
Hi Experts,
i enhanced the the data source 0FI_AP_4 with the four fields BUSAB,MWSKZ,TXJCD,FWSTE
now i need to write code in CMOD to populate these fields in to RSA3, but i dont know from which tables these fields will get populated........
can you please give me the tables from which these fields will get populated
BUSAB - Accounting clerck - Table ?
MWSKZ - Tax code - Table ?
TXJCD - Jurisdiction code - Table ?
FWSTE - Tax amount - Table ?
Thank youHi,
You can follow the various approach to identify the table to populate the fields.
1. Use Tcode SE11 and go to where used list to find desired table from the list of table.
2. Use FI trasnsaction code to check FI document in R/3 (If you are not sure which code to be used please take the help of functional consultant) and press F1 -> go to technical help -> and you can find the proper FIELD/TABLE relationship.
Dev -
Current Date in the Text Field
Hi,
I have got a requirement where i have one text field and one data/time field. Once we select the date from the date field, the date selected in the date field should be reflected in text field in the format DD.MM.YY along with some other text.
for example,
if we select date as 03/02/2009 - Date Field, we should get it as
Today is (date with format DD.MM.YY)On the exit of the Date field write the javascript code:
TextField.rawValue = "Today is " + this.rawValue
Maybe you are looking for
-
How can we verify the custom props in (Flash Access) license is there?
We've added custom properties to a FAXS license and we'd like the client (OSMF-based media player) to display it (eg overlay those properties like a watermark over the video). The custom properties were added via "ApplicationDefinedRight" and "Applic
-
Last name on bill spelled wrong
I need to change my last name on my bill...somehow there was a typo and it's spelled incorrectly. How should I go about doing this?
-
Since I don't have an Apple display, I didn't want to post this there. But I have a bit of a problem running my display at the 75 Hz refresh rate. There's a furnace or something in my building that must sit almost directly under were my desk is. When
-
I can't enter any values in JTextField after loading the flash files.
Hi to all, In my application I have two panels. One panel has JTextField and another panel i loaded flash files. The flash files are build by CS4. I'm using JDIC to load the flash files. While open the application i loaded flash file and I try to ent
-
Fileservice (smb) unresponsive - other service (TCP) available - smbclient event 30809
Problem: Connections to fileshares(smb) on windows 2012 r2 server are suddenly not possible. This server is also a AD DS server and also GPO`s can`t be retrieved by other clients (example w2008 r2 RDS servers). Rebooting the server will solve it. No